* [gentoo-user] could there be a problem with acct-group/lp?
@ 2020-12-30 22:17 n952162
2020-12-30 23:33 ` Jack
2021-01-01 20:13 ` [gentoo-user] could there be a problem with acct-group/lp? [RESOLVED] n952162
0 siblings, 2 replies; 13+ messages in thread
From: n952162 @ 2020-12-30 22:17 UTC (permalink / raw
To: Gentoo User list
When I try to restore my pkgs, after the --depclean, the emerge fails.
It seems like there's an error in the pre-inst script of acct-group/lp?
That's need by cups:
1270~/adm/gentoo/emerged>sudo cat
/var/tmp/portage/acct-group/lp-0-r1/temp/build.log
* Package: acct-group/lp-0-r1
* Repository: gentoo
* Maintainer: systemd@gentoo.org printing@gentoo.org
* USE: abi_x86_64 amd64 elibc_glibc kernel_linux userland_GNU
* FEATURES: network-sandbox preserve-libs sandbox userpriv usersandbox
>>> Unpacking source...
>>> Source unpacked in /var/tmp/portage/acct-group/lp-0-r1/work
>>> Preparing source in /var/tmp/portage/acct-group/lp-0-r1/work ...
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/acct-group/lp-0-r1/work ...
>>> Source configured.
>>> Compiling source in /var/tmp/portage/acct-group/lp-0-r1/work ...
>>> Source compiled.
>>> Test phase [not enabled]: acct-group/lp-0-r1
>>> Install acct-group/lp-0-r1 into
/var/tmp/portage/acct-group/lp-0-r1/image
>>> Completed installing acct-group/lp-0-r1 into
/var/tmp/portage/acct-group/lp-0-r1/image
* Final size of build directory: 4 KiB
* Final size of installed tree: 20 KiB
* checking 1 files for package collisions
>>> Merging acct-group/lp-0-r1 to /
error writing group entry: Invalid argument
* Adding group 'lp' to your system ...
error writing group entry: Invalid argument
* - Groupid: 7
groupadd: group 'lp' already exists
* ERROR: acct-group/lp-0-r1::gentoo failed (preinst phase):
* (no error message)
*
* Call stack:
* ebuild.sh, line 125: Called pkg_preinst
* environment, line 1194: Called acct-group_pkg_preinst
* environment, line 360: Called enewgroup 'lp' '7'
* environment, line 735: Called die
* The specific snippet of code:
* groupadd -r ${opts} "${egroup}" || die
*
* If you need support, post the output of `emerge --info
'=acct-group/lp-0-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv
'=acct-group/lp-0-r1::gentoo'`.
* The complete build log is located at
'/var/tmp/portage/acct-group/lp-0-r1/temp/build.log'.
* The ebuild environment file is located at
'/var/tmp/portage/acct-group/lp-0-r1/temp/environment'.
* Working directory: '/var/tmp/portage/acct-group/lp-0-r1/homedir'
* S: '/var/tmp/portage/acct-group/lp-0-r1/work'
!!! FAILED preinst: 1
Then there's this, from emerge --info:
Password:
Portage 3.0.9 (python 3.8.6-final-0, default/linux/amd64/17.1,
gcc-9.3.0, glibc-2.32-r3, 4.19.72-gentoo x86_64)
=================================================================
System Settings
=================================================================
System uname:
Linux-4.19.72-gentoo-x86_64-AMD_A9-9420_RADEON_R5,_5_COMPUTE_CORES_2C+3G-with-glibc2.2.5
KiB Mem: 7672120 total, 1147028 free
KiB Swap: 8388604 total, 8387316 free
Timestamp of repository gentoo: Wed, 30 Dec 2020 20:30:01 +0000
Head commit of repository gentoo: 19c597e94d94dff08de5c0d8a692f871b75c4130
sh bash 5.0_p18
ld GNU ld (Gentoo 2.34 p6) 2.34.0
app-shells/bash: 5.0_p18::gentoo
dev-lang/perl: 5.30.3::gentoo
dev-lang/python: 2.7.18-r4::gentoo, 3.6.12::gentoo,
3.7.9::gentoo, 3.8.6::gentoo, 3.9.0::gentoo
dev-util/cmake: 3.17.4-r1::gentoo
sys-apps/baselayout: 2.7::gentoo
sys-apps/openrc: 0.42.1::gentoo
sys-apps/sandbox: 2.20::gentoo
sys-devel/autoconf: 2.13-r1::gentoo, 2.69-r5::gentoo
sys-devel/automake: 1.16.2-r1::gentoo
sys-devel/binutils: 2.34-r2::gentoo
sys-devel/gcc: 9.3.0-r2::gentoo
sys-devel/gcc-config: 2.3.2-r1::gentoo
sys-devel/libtool: 2.4.6-r6::gentoo
sys-devel/make: 4.3::gentoo
sys-kernel/linux-headers: 5.4-r1::gentoo (virtual/os-headers)
sys-libs/glibc: 2.32-r3::gentoo
Repositories:
gentoo
location: /var/db/repos/gentoo
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
sync-rsync-verify-jobs: 1
sync-rsync-verify-max-age: 24
sync-rsync-extra-opts:
sync-rsync-verify-metamanifest: yes
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="@FREE"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d
/etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild
/etc/sandbox.d /etc/terminfo"
CXXFLAGS="-O2 -pipe"
DISTDIR="/var/cache/distfiles"
ENV_UNSET="CARGO_HOME DBUS_SESSION_BUS_ADDRESS DISPLAY GOBIN GOPATH
PERL5LIB PERL5OPT PERLPREFIX PERL_CORE PERL_MB_OPT PERL_MM_OPT
XAUTHORITY XDG_CACHE_HOME XDG_CONFIG_HOME XDG_DATA_HOME XDG_RUNTIME_DIR"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-docompress binpkg-dostrip binpkg-logs
config-protect-if-modified distlocks ebuild-locks fixlafiles ipc-sandbox
merge-sync multilib-strict network-sandbox news parallel-fetch
pid-sandbox preserve-libs protect-owned qa-unresolved-soname-deps
sandbox sfperms strict unknown-features-warn unmerge-logs
unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LANG="C"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
PKGDIR="/var/cache/binpkgs"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times
--omit-dir-times --compress --force --whole-file --delete --stats
--human-readable --timeout=180 --exclude=/distfiles --exclude=/local
--exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"
USE="acl amd64 berkdb bzip2 cli crypt dri fortran gdbm iconv ipv6
libglvnd libtirpc multilib ncurses nls nptl openmp pam pcre readline
seccomp split-usr ssl tcpd unicode xattr zlib" ABI_X86="64"
ADA_TARGET="gnat_2018" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem
bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801
hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx
via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core
socache_shmcb unixd actions alias auth_basic authn_alias authn_anon
authn_dbm authn_default authn_file authz_dbm authz_default
authz_groupfile authz_host authz_owner authz_user autoindex cache cgi
cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter
file_cache filter headers include info log_config logio mem_cache mime
mime_magic negotiation rewrite setenvif speling status unique_id userdir
usertrack vhost_alias" CALLIGRA_FEATURES="karbon sheets words"
COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog"
CPU_FLAGS_X86="mmx mmxext sse sse2" ELIBC="glibc"
GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt
gpsclock greis isync itrax mtk3301 nmea ntrip navcom oceanserver
oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip
tripmate tnt ublox ubx" INPUT_DEVICES="libinput" KERNEL="linux"
LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb
ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console
presenter-minimizer" LUA_SINGLE_TARGET="lua5-1" LUA_TARGETS="lua5-1"
OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php7-2 php7-3 php7-4"
POSTGRES_TARGETS="postgres10 postgres11"
PYTHON_SINGLE_TARGET="python3_8" PYTHON_TARGETS="python2_7 python3_8"
RUBY_TARGETS="ruby25 ruby26" USERLAND="GNU" VIDEO_CARDS="amdgpu
radeonsi" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options
ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat
logmark ipmark dhcpmac delude chaos account"
Unset: CC, CPPFLAGS, CTARGET, CXX, EMERGE_DEFAULT_OPTS, INSTALL_MASK,
LC_ALL, LINGUAS, MAKEOPTS, PORTAGE_BINHOST, PORTAGE_BUNZIP2_COMMAND,
PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [gentoo-user] could there be a problem with acct-group/lp?
2020-12-30 22:17 [gentoo-user] could there be a problem with acct-group/lp? n952162
@ 2020-12-30 23:33 ` Jack
2020-12-31 0:29 ` Michael
2020-12-31 7:20 ` n952162
2021-01-01 20:13 ` [gentoo-user] could there be a problem with acct-group/lp? [RESOLVED] n952162
1 sibling, 2 replies; 13+ messages in thread
From: Jack @ 2020-12-30 23:33 UTC (permalink / raw
To: gentoo-user
On 2020.12.30 17:17, n952162 wrote:
> When I try to restore my pkgs, after the --depclean, the emerge
> fails.
> It seems like there's an error in the pre-inst script of
> acct-group/lp?
> That's need by cups:
>
> 1270~/adm/gentoo/emerged>sudo cat
> /var/tmp/portage/acct-group/lp-0-r1/temp/build.log
> * Package: acct-group/lp-0-r1
> * Repository: gentoo
> * Maintainer: systemd@gentoo.org printing@gentoo.org
> * USE: abi_x86_64 amd64 elibc_glibc kernel_linux userland_GNU
> * FEATURES: network-sandbox preserve-libs sandbox userpriv
> usersandbox
> >>> Unpacking source...
> >>> Source unpacked in /var/tmp/portage/acct-group/lp-0-r1/work
> >>> Preparing source in /var/tmp/portage/acct-group/lp-0-r1/work ...
> >>> Source prepared.
> >>> Configuring source in /var/tmp/portage/acct-group/lp-0-r1/work ...
> >>> Source configured.
> >>> Compiling source in /var/tmp/portage/acct-group/lp-0-r1/work ...
> >>> Source compiled.
> >>> Test phase [not enabled]: acct-group/lp-0-r1
>
> >>> Install acct-group/lp-0-r1 into
> /var/tmp/portage/acct-group/lp-0-r1/image
> >>> Completed installing acct-group/lp-0-r1 into
> /var/tmp/portage/acct-group/lp-0-r1/image
>
> * Final size of build directory: 4 KiB
> * Final size of installed tree: 20 KiB
>
> * checking 1 files for package collisions
> >>> Merging acct-group/lp-0-r1 to /
> error writing group entry: Invalid argument
> * Adding group 'lp' to your system ...
> error writing group entry: Invalid argument
> * - Groupid: 7
> groupadd: group 'lp' already exists
This seems to be the basic cause. However, I have no idea what that
emerge should do if the group it wants to install does already exist.
I can re-emerge this package with no problems. Is this a new install
or reinstall? All the logic is in the eclass which does have the
comment "Creates the group if it does not exist."
What happens if you just run "emerge -1 acct-group/lp"? Have you done
a successful "emerge -auDvN @system" ? There may well be something
else required still missing, but not an explicit dependency because it
is part of @system.
> * ERROR: acct-group/lp-0-r1::gentoo failed (preinst phase):
> * (no error message)
> *
> * Call stack:
> * ebuild.sh, line 125: Called pkg_preinst
> * environment, line 1194: Called acct-group_pkg_preinst
> * environment, line 360: Called enewgroup 'lp' '7'
> * environment, line 735: Called die
> * The specific snippet of code:
> * groupadd -r ${opts} "${egroup}" || die
> *
> * If you need support, post the output of `emerge --info
> '=acct-group/lp-0-r1::gentoo'`,
> * the complete build log and the output of `emerge -pqv
> '=acct-group/lp-0-r1::gentoo'`.
> * The complete build log is located at
> '/var/tmp/portage/acct-group/lp-0-r1/temp/build.log'.
> * The ebuild environment file is located at
> '/var/tmp/portage/acct-group/lp-0-r1/temp/environment'.
> * Working directory: '/var/tmp/portage/acct-group/lp-0-r1/homedir'
> * S: '/var/tmp/portage/acct-group/lp-0-r1/work'
> !!! FAILED preinst: 1
>
> Then there's this, from emerge --info:
>
> Password:
> Portage 3.0.9 (python 3.8.6-final-0, default/linux/amd64/17.1,
> gcc-9.3.0, glibc-2.32-r3, 4.19.72-gentoo x86_64)
> =================================================================
> System Settings
> =================================================================
> System uname:
> Linux-4.19.72-gentoo-x86_64-AMD_A9-9420_RADEON_R5,_5_COMPUTE_CORES_2C+3G-with-glibc2.2.5
> KiB Mem: 7672120 total, 1147028 free
> KiB Swap: 8388604 total, 8387316 free
> Timestamp of repository gentoo: Wed, 30 Dec 2020 20:30:01 +0000
> Head commit of repository gentoo:
> 19c597e94d94dff08de5c0d8a692f871b75c4130
> sh bash 5.0_p18
> ld GNU ld (Gentoo 2.34 p6) 2.34.0
> app-shells/bash: 5.0_p18::gentoo
> dev-lang/perl: 5.30.3::gentoo
> dev-lang/python: 2.7.18-r4::gentoo, 3.6.12::gentoo,
> 3.7.9::gentoo, 3.8.6::gentoo, 3.9.0::gentoo
> dev-util/cmake: 3.17.4-r1::gentoo
> sys-apps/baselayout: 2.7::gentoo
> sys-apps/openrc: 0.42.1::gentoo
> sys-apps/sandbox: 2.20::gentoo
> sys-devel/autoconf: 2.13-r1::gentoo, 2.69-r5::gentoo
> sys-devel/automake: 1.16.2-r1::gentoo
> sys-devel/binutils: 2.34-r2::gentoo
> sys-devel/gcc: 9.3.0-r2::gentoo
> sys-devel/gcc-config: 2.3.2-r1::gentoo
> sys-devel/libtool: 2.4.6-r6::gentoo
> sys-devel/make: 4.3::gentoo
> sys-kernel/linux-headers: 5.4-r1::gentoo (virtual/os-headers)
> sys-libs/glibc: 2.32-r3::gentoo
> Repositories:
>
> gentoo
> location: /var/db/repos/gentoo
> sync-type: rsync
> sync-uri: rsync://rsync.gentoo.org/gentoo-portage
> priority: -1000
> sync-rsync-verify-jobs: 1
> sync-rsync-verify-max-age: 24
> sync-rsync-extra-opts:
> sync-rsync-verify-metamanifest: yes
>
> ACCEPT_KEYWORDS="amd64"
> ACCEPT_LICENSE="@FREE"
> CBUILD="x86_64-pc-linux-gnu"
> CFLAGS="-O2 -pipe"
> CHOST="x86_64-pc-linux-gnu"
> CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt"
> CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d
> /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release
> /etc/revdep-rebuild
> /etc/sandbox.d /etc/terminfo"
> CXXFLAGS="-O2 -pipe"
> DISTDIR="/var/cache/distfiles"
> ENV_UNSET="CARGO_HOME DBUS_SESSION_BUS_ADDRESS DISPLAY GOBIN GOPATH
> PERL5LIB PERL5OPT PERLPREFIX PERL_CORE PERL_MB_OPT PERL_MM_OPT
> XAUTHORITY XDG_CACHE_HOME XDG_CONFIG_HOME XDG_DATA_HOME
> XDG_RUNTIME_DIR"
> FCFLAGS="-O2 -pipe"
> FEATURES="assume-digests binpkg-docompress binpkg-dostrip binpkg-logs
> config-protect-if-modified distlocks ebuild-locks fixlafiles
> ipc-sandbox
> merge-sync multilib-strict network-sandbox news parallel-fetch
> pid-sandbox preserve-libs protect-owned qa-unresolved-soname-deps
> sandbox sfperms strict unknown-features-warn unmerge-logs
> unmerge-orphans userfetch userpriv usersandbox usersync xattr"
> FFLAGS="-O2 -pipe"
> GENTOO_MIRRORS="http://distfiles.gentoo.org"
> LANG="C"
> LDFLAGS="-Wl,-O1 -Wl,--as-needed"
> PKGDIR="/var/cache/binpkgs"
> PORTAGE_CONFIGROOT="/"
> PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times
> --omit-dir-times --compress --force --whole-file --delete --stats
> --human-readable --timeout=180 --exclude=/distfiles --exclude=/local
> --exclude=/packages --exclude=/.git"
> PORTAGE_TMPDIR="/var/tmp"
> USE="acl amd64 berkdb bzip2 cli crypt dri fortran gdbm iconv ipv6
> libglvnd libtirpc multilib ncurses nls nptl openmp pam pcre readline
> seccomp split-usr ssl tcpd unicode xattr zlib" ABI_X86="64"
> ADA_TARGET="gnat_2018" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem
> bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801
> hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx
> via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core
> socache_shmcb unixd actions alias auth_basic authn_alias authn_anon
> authn_dbm authn_default authn_file authz_dbm authz_default
> authz_groupfile authz_host authz_owner authz_user autoindex cache cgi
> cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter
> file_cache filter headers include info log_config logio mem_cache mime
> mime_magic negotiation rewrite setenvif speling status unique_id
> userdir
> usertrack vhost_alias" CALLIGRA_FEATURES="karbon sheets words"
> COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog"
> CPU_FLAGS_X86="mmx mmxext sse sse2" ELIBC="glibc"
> GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt
> gpsclock greis isync itrax mtk3301 nmea ntrip navcom oceanserver
> oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing
> tsip
> tripmate tnt ublox ubx" INPUT_DEVICES="libinput" KERNEL="linux"
> LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb
> ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console
> presenter-minimizer" LUA_SINGLE_TARGET="lua5-1" LUA_TARGETS="lua5-1"
> OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php7-2 php7-3 php7-4"
> POSTGRES_TARGETS="postgres10 postgres11"
> PYTHON_SINGLE_TARGET="python3_8" PYTHON_TARGETS="python2_7 python3_8"
> RUBY_TARGETS="ruby25 ruby26" USERLAND="GNU" VIDEO_CARDS="amdgpu
> radeonsi" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options
> ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat
> logmark ipmark dhcpmac delude chaos account"
> Unset: CC, CPPFLAGS, CTARGET, CXX, EMERGE_DEFAULT_OPTS, INSTALL_MASK,
> LC_ALL, LINGUAS, MAKEOPTS, PORTAGE_BINHOST, PORTAGE_BUNZIP2_COMMAND,
> PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS
>
>
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [gentoo-user] could there be a problem with acct-group/lp?
2020-12-30 23:33 ` Jack
@ 2020-12-31 0:29 ` Michael
2020-12-31 7:34 ` n952162
2020-12-31 7:20 ` n952162
1 sibling, 1 reply; 13+ messages in thread
From: Michael @ 2020-12-31 0:29 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 3005 bytes --]
On Wednesday, 30 December 2020 23:33:47 GMT Jack wrote:
> On 2020.12.30 17:17, n952162 wrote:
> > When I try to restore my pkgs, after the --depclean, the emerge
> > fails.
> > It seems like there's an error in the pre-inst script of
> > acct-group/lp?
> > That's need by cups:
> >
> > 1270~/adm/gentoo/emerged>sudo cat
> > /var/tmp/portage/acct-group/lp-0-r1/temp/build.log
> > * Package: acct-group/lp-0-r1
> > * Repository: gentoo
> > * Maintainer: systemd@gentoo.org printing@gentoo.org
> > * USE: abi_x86_64 amd64 elibc_glibc kernel_linux userland_GNU
> > * FEATURES: network-sandbox preserve-libs sandbox userpriv
> > usersandbox
> >
> > >>> Unpacking source...
> > >>> Source unpacked in /var/tmp/portage/acct-group/lp-0-r1/work
> > >>> Preparing source in /var/tmp/portage/acct-group/lp-0-r1/work ...
> > >>> Source prepared.
> > >>> Configuring source in /var/tmp/portage/acct-group/lp-0-r1/work ...
> > >>> Source configured.
> > >>> Compiling source in /var/tmp/portage/acct-group/lp-0-r1/work ...
> > >>> Source compiled.
> > >>> Test phase [not enabled]: acct-group/lp-0-r1
> > >>>
> > >>> Install acct-group/lp-0-r1 into
> >
> > /var/tmp/portage/acct-group/lp-0-r1/image
> >
> > >>> Completed installing acct-group/lp-0-r1 into
> >
> > /var/tmp/portage/acct-group/lp-0-r1/image
> >
> > * Final size of build directory: 4 KiB
> > * Final size of installed tree: 20 KiB
> >
> > * checking 1 files for package collisions
> >
> > >>> Merging acct-group/lp-0-r1 to /
> >
> > error writing group entry: Invalid argument
> > * Adding group 'lp' to your system ...
> > error writing group entry: Invalid argument
> > * - Groupid: 7
> > groupadd: group 'lp' already exists
>
> This seems to be the basic cause. However, I have no idea what that
> emerge should do if the group it wants to install does already exist.
> I can re-emerge this package with no problems. Is this a new install
> or reinstall? All the logic is in the eclass which does have the
> comment "Creates the group if it does not exist."
>
> What happens if you just run "emerge -1 acct-group/lp"? Have you done
> a successful "emerge -auDvN @system" ? There may well be something
> else required still missing, but not an explicit dependency because it
> is part of @system.
Some other things to try after @system if the problem persists:
Check the ownership and access rights of /etc/group:
$ stat /etc/group
File: /etc/group
Size: 855 Blocks: 8 IO Block: 4096 regular file
Device: 80ah/2058d Inode: 1055521 Links: 1
Access: (0644/-rw-r--r--) Uid: ( 0/ root) Gid: ( 0/ root)
Access: 2020-10-25 16:25:42.814894971 +0000
Modify: 2020-10-25 16:25:42.815894988 +0000
Change: 2020-10-25 16:25:42.892896366 +0000
Birth: 2020-10-25 16:25:42.814894971 +0000
Check the particular group ID:
$ grep :7: /etc/group
lp:x:7:lp
Emerge cups which installs lp:
emerge -1aDv net-print/cups
Then try again as suggested:
emerge -1aDv acct-group/lp
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [gentoo-user] could there be a problem with acct-group/lp?
2020-12-31 0:29 ` Michael
@ 2020-12-31 7:34 ` n952162
2020-12-31 9:31 ` Neil Bothwick
2020-12-31 13:14 ` Michael Orlitzky
0 siblings, 2 replies; 13+ messages in thread
From: n952162 @ 2020-12-31 7:34 UTC (permalink / raw
To: gentoo-user
On 12/31/20 1:29 AM, Michael wrote:
> On Wednesday, 30 December 2020 23:33:47 GMT Jack wrote:
>> On 2020.12.30 17:17, n952162 wrote:
>>> When I try to restore my pkgs, after the --depclean, the emerge
>>> fails.
>>> It seems like there's an error in the pre-inst script of
>>> acct-group/lp?
>>> That's need by cups:
>>>
>>> 1270~/adm/gentoo/emerged>sudo cat
>>> /var/tmp/portage/acct-group/lp-0-r1/temp/build.log
>>> * Package: acct-group/lp-0-r1
>>> * Repository: gentoo
>>> * Maintainer: systemd@gentoo.org printing@gentoo.org
>>> * USE: abi_x86_64 amd64 elibc_glibc kernel_linux userland_GNU
>>> * FEATURES: network-sandbox preserve-libs sandbox userpriv
>>> usersandbox
>>>
>>>>>> Unpacking source...
>>>>>> Source unpacked in /var/tmp/portage/acct-group/lp-0-r1/work
>>>>>> Preparing source in /var/tmp/portage/acct-group/lp-0-r1/work ...
>>>>>> Source prepared.
>>>>>> Configuring source in /var/tmp/portage/acct-group/lp-0-r1/work ...
>>>>>> Source configured.
>>>>>> Compiling source in /var/tmp/portage/acct-group/lp-0-r1/work ...
>>>>>> Source compiled.
>>>>>> Test phase [not enabled]: acct-group/lp-0-r1
>>>>>>
>>>>>> Install acct-group/lp-0-r1 into
>>> /var/tmp/portage/acct-group/lp-0-r1/image
>>>
>>>>>> Completed installing acct-group/lp-0-r1 into
>>> /var/tmp/portage/acct-group/lp-0-r1/image
>>>
>>> * Final size of build directory: 4 KiB
>>> * Final size of installed tree: 20 KiB
>>>
>>> * checking 1 files for package collisions
>>>
>>>>>> Merging acct-group/lp-0-r1 to /
>>> error writing group entry: Invalid argument
>>> * Adding group 'lp' to your system ...
>>> error writing group entry: Invalid argument
>>> * - Groupid: 7
>>> groupadd: group 'lp' already exists
>> This seems to be the basic cause. However, I have no idea what that
>> emerge should do if the group it wants to install does already exist.
>> I can re-emerge this package with no problems. Is this a new install
>> or reinstall? All the logic is in the eclass which does have the
>> comment "Creates the group if it does not exist."
>>
>> What happens if you just run "emerge -1 acct-group/lp"? Have you done
>> a successful "emerge -auDvN @system" ? There may well be something
>> else required still missing, but not an explicit dependency because it
>> is part of @system.
> Some other things to try after @system if the problem persists:
>
> Check the ownership and access rights of /etc/group:
>
> $ stat /etc/group
> File: /etc/group
> Size: 855 Blocks: 8 IO Block: 4096 regular file
> Device: 80ah/2058d Inode: 1055521 Links: 1
> Access: (0644/-rw-r--r--) Uid: ( 0/ root) Gid: ( 0/ root)
> Access: 2020-10-25 16:25:42.814894971 +0000
> Modify: 2020-10-25 16:25:42.815894988 +0000
> Change: 2020-10-25 16:25:42.892896366 +0000
> Birth: 2020-10-25 16:25:42.814894971 +0000
>
>
> Check the particular group ID:
>
> $ grep :7: /etc/group
> lp:x:7:lp
>
>
> Emerge cups which installs lp:
>
> emerge -1aDv net-print/cups
>
> Then try again as suggested:
>
> emerge -1aDv acct-group/lp
>
>
>
$ ls -l /etc/group
-rw-r--r-- 1 root root 907 Dec 30 20:53 /etc/group
$ stat /etc/group
File: `/etc/group'
Size: 907 Blocks: 8 IO Block: 4096 regular file
Device: 801h/2049d Inode: 950897 Links: 1
Access: (0644/-rw-r--r--) Uid: ( 0/ root) Gid: ( 0/ root)
Access: 2020-12-30 20:53:13.000000000 +0100
Modify: 2020-12-30 20:53:12.000000000 +0100
Change: 2020-12-30 20:53:12.000000000 +0100
Birth: -
$ grep :7: /etc/group
lp:x:7:lp:me
cups was already installed. I considered removing it, but several other
things, like ghostscript (!) are dependent on it. I'm using
--keep-going for now. I suspect a bug in acct-group/lp that will get
cleared up.
Why do you specify -1? That's the most common advice I get for avoiding
slot-conflicts, but I can't imagine a system without cups.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [gentoo-user] could there be a problem with acct-group/lp?
2020-12-31 7:34 ` n952162
@ 2020-12-31 9:31 ` Neil Bothwick
2020-12-31 11:03 ` Michael
2020-12-31 13:14 ` Michael Orlitzky
1 sibling, 1 reply; 13+ messages in thread
From: Neil Bothwick @ 2020-12-31 9:31 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 521 bytes --]
On Thu, 31 Dec 2020 08:34:42 +0100, n952162 wrote:
> Why do you specify -1? That's the most common advice I get for avoiding
> slot-conflicts, but I can't imagine a system without cups.
To avoid adding to your world file. If a package needs to be in @world,
it will already be there to -1 will be harmless. In the case of CUPS, you
don't want it in world as it is a dependency of any program that wants to
be able to print.
--
Neil Bothwick
Those who live by the sword get shot by those who don't.
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [gentoo-user] could there be a problem with acct-group/lp?
2020-12-31 9:31 ` Neil Bothwick
@ 2020-12-31 11:03 ` Michael
0 siblings, 0 replies; 13+ messages in thread
From: Michael @ 2020-12-31 11:03 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 1832 bytes --]
On Thursday, 31 December 2020 09:31:13 GMT Neil Bothwick wrote:
> On Thu, 31 Dec 2020 08:34:42 +0100, n952162 wrote:
> > Why do you specify -1? That's the most common advice I get for avoiding
> > slot-conflicts, but I can't imagine a system without cups.
>
> To avoid adding to your world file. If a package needs to be in @world,
> it will already be there to -1 will be harmless. In the case of CUPS, you
> don't want it in world as it is a dependency of any program that wants to
> be able to print.
Yes, what Neil sagely advised. :-)
I suggest you make it a rule to always run emerge for any individual package
atom with -1, unless you *really* intend to install such a package yourself
and it has not been already installed as a dependency for other package(s).
If you do not use -1 the package you emerge will be added in your world file
and then you could end up fighting against portage sooner or later.
Imagine a hypothetical scenario where one day CUPS is deprecated and replaced
by the oh-so-marvellous latest and greatest CUPS-ng. You try to update your
system, but come up against a blocker because the recently deprecated old CUPS
now clashes with CUPS-ng. The old CUPS is in your world file, because you
added it there by running emerge without -1 and consequently portage cannot
override your choice and unmerge it to replace it with CUPS-ng. Portage will
now throw a wobbly, alerting you to a blocker you must resolve yourself.
This is why you were advised in previous messages related to the recent python
updates to make sure among other things no python packages have inadvertently
ended up in your world file. Unless you're a developer with specific python
requirements, you would not want python which is both a @system set and
potentially @world set dependency to end up in there.
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [gentoo-user] could there be a problem with acct-group/lp?
2020-12-31 7:34 ` n952162
2020-12-31 9:31 ` Neil Bothwick
@ 2020-12-31 13:14 ` Michael Orlitzky
2021-01-01 19:47 ` n952162
1 sibling, 1 reply; 13+ messages in thread
From: Michael Orlitzky @ 2020-12-31 13:14 UTC (permalink / raw
To: gentoo-user
On 12/31/20 2:34 AM, n952162 wrote:
>
> cups was already installed. I considered removing it, but several other
> things, like ghostscript (!) are dependent on it. I'm using
> --keep-going for now. I suspect a bug in acct-group/lp that will get
> cleared up.
>
If it's a bug in the acct-user eclass, it's a rare one. It would help if
you could pin down the root cause. It's not something easy like "it
fails if the user already exists." Every user and group ebuild is
already at "-r1", which means they've been reinstalled at least once on
most peoples' machines.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [gentoo-user] could there be a problem with acct-group/lp?
2020-12-31 13:14 ` Michael Orlitzky
@ 2021-01-01 19:47 ` n952162
2021-01-01 19:50 ` n952162
2021-01-01 20:01 ` n952162
0 siblings, 2 replies; 13+ messages in thread
From: n952162 @ 2021-01-01 19:47 UTC (permalink / raw
To: gentoo-user
On 12/31/20 2:14 PM, Michael Orlitzky wrote:
> On 12/31/20 2:34 AM, n952162 wrote:
>>
>> cups was already installed. I considered removing it, but several other
>> things, like ghostscript (!) are dependent on it. I'm using
>> --keep-going for now. I suspect a bug in acct-group/lp that will get
>> cleared up.
>>
>
> If it's a bug in the acct-user eclass, it's a rare one. It would help
> if you could pin down the root cause. It's not something easy like "it
> fails if the user already exists." Every user and group ebuild is
> already at "-r1", which means they've been reinstalled at least once
> on most peoples' machines.
>
Perhaps this is relevant:
https://forums.gentoo.org/viewtopic-p-7975642.html
I haven't tried commenting out the group yet because my update is still
in progress...
I'd considering removing the group, like, legally, but was afraid it
might erase things, like my cups ppd files. But just commenting the
group out is genius.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [gentoo-user] could there be a problem with acct-group/lp?
2021-01-01 19:47 ` n952162
@ 2021-01-01 19:50 ` n952162
2021-01-01 20:01 ` n952162
1 sibling, 0 replies; 13+ messages in thread
From: n952162 @ 2021-01-01 19:50 UTC (permalink / raw
To: gentoo-user
On 1/1/21 8:47 PM, n952162 wrote:
> On 12/31/20 2:14 PM, Michael Orlitzky wrote:
>> On 12/31/20 2:34 AM, n952162 wrote:
>>>
>>> cups was already installed. I considered removing it, but several
>>> other
>>> things, like ghostscript (!) are dependent on it. I'm using
>>> --keep-going for now. I suspect a bug in acct-group/lp that will get
>>> cleared up.
>>>
>>
>> If it's a bug in the acct-user eclass, it's a rare one. It would help
>> if you could pin down the root cause. It's not something easy like "it
>> fails if the user already exists." Every user and group ebuild is
>> already at "-r1", which means they've been reinstalled at least once
>> on most peoples' machines.
>>
>
> Perhaps this is relevant:
>
> https://forums.gentoo.org/viewtopic-p-7975642.html
>
> I haven't tried commenting out the group yet because my update is still
> in progress...
>
> I'd considering removing the group, like, legally, but was afraid it
> might erase things, like my cups ppd files. But just commenting the
> group out is genius.
>
>
In particulary, there's this:
https://forums.gentoo.org/viewtopic-p-7975642.html#7975642
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [gentoo-user] could there be a problem with acct-group/lp?
2021-01-01 19:47 ` n952162
2021-01-01 19:50 ` n952162
@ 2021-01-01 20:01 ` n952162
1 sibling, 0 replies; 13+ messages in thread
From: n952162 @ 2021-01-01 20:01 UTC (permalink / raw
To: gentoo-user
On 1/1/21 8:47 PM, n952162 wrote:
> On 12/31/20 2:14 PM, Michael Orlitzky wrote:
>> On 12/31/20 2:34 AM, n952162 wrote:
>>>
>>> cups was already installed. I considered removing it, but several
>>> other
>>> things, like ghostscript (!) are dependent on it. I'm using
>>> --keep-going for now. I suspect a bug in acct-group/lp that will get
>>> cleared up.
>>>
>>
>> If it's a bug in the acct-user eclass, it's a rare one. It would help
>> if you could pin down the root cause. It's not something easy like "it
>> fails if the user already exists." Every user and group ebuild is
>> already at "-r1", which means they've been reinstalled at least once
>> on most peoples' machines.
>>
>
> Perhaps this is relevant:
>
> https://forums.gentoo.org/viewtopic-p-7975642.html
>
> I haven't tried commenting out the group yet because my update is still
> in progress...
>
> I'd considering removing the group, like, legally, but was afraid it
> might erase things, like my cups ppd files. But just commenting the
> group out is genius.
>
>
No, I think I found a mistake on my system:
lp:x:7:lp:me
The last colon should be a comma.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [gentoo-user] could there be a problem with acct-group/lp?
2020-12-30 23:33 ` Jack
2020-12-31 0:29 ` Michael
@ 2020-12-31 7:20 ` n952162
2020-12-31 9:33 ` Neil Bothwick
1 sibling, 1 reply; 13+ messages in thread
From: n952162 @ 2020-12-31 7:20 UTC (permalink / raw
To: gentoo-user
On 12/31/20 12:33 AM, Jack wrote:
> On 2020.12.30 17:17, n952162 wrote:
>> When I try to restore my pkgs, after the --depclean, the emerge fails.
>> It seems like there's an error in the pre-inst script of acct-group/lp?
>> That's need by cups:
>>
>> 1270~/adm/gentoo/emerged>sudo cat
>> /var/tmp/portage/acct-group/lp-0-r1/temp/build.log
>> * Package: acct-group/lp-0-r1
>> * Repository: gentoo
>> * Maintainer: systemd@gentoo.org printing@gentoo.org
>> * USE: abi_x86_64 amd64 elibc_glibc kernel_linux userland_GNU
>> * FEATURES: network-sandbox preserve-libs sandbox userpriv
>> usersandbox
>> >>> Unpacking source...
>> >>> Source unpacked in /var/tmp/portage/acct-group/lp-0-r1/work
>> >>> Preparing source in /var/tmp/portage/acct-group/lp-0-r1/work ...
>> >>> Source prepared.
>> >>> Configuring source in /var/tmp/portage/acct-group/lp-0-r1/work ...
>> >>> Source configured.
>> >>> Compiling source in /var/tmp/portage/acct-group/lp-0-r1/work ...
>> >>> Source compiled.
>> >>> Test phase [not enabled]: acct-group/lp-0-r1
>>
>> >>> Install acct-group/lp-0-r1 into
>> /var/tmp/portage/acct-group/lp-0-r1/image
>> >>> Completed installing acct-group/lp-0-r1 into
>> /var/tmp/portage/acct-group/lp-0-r1/image
>>
>> * Final size of build directory: 4 KiB
>> * Final size of installed tree: 20 KiB
>>
>> * checking 1 files for package collisions
>> >>> Merging acct-group/lp-0-r1 to /
>> error writing group entry: Invalid argument
>> * Adding group 'lp' to your system ...
>> error writing group entry: Invalid argument
>> * - Groupid: 7
>> groupadd: group 'lp' already exists
> This seems to be the basic cause.
Perhaps. But there are two "invalid argument" error messages before the
"already exists" msg.
> However, I have no idea what that emerge should do if the group it
> wants to install does already exist. I can re-emerge this package
> with no problems.
That's interesting! Maybe re-emerge would behave differently from a
de-install/emerge?
In any case though, crashing if the group already exists would be a bug
the developers should be interested in.
> Is this a new install or reinstall? All the logic is in the eclass
> which does have the comment "Creates the group if it does not exist."
I was looking for that ... I didn't find groupadd in
/var/db/pkg/acct-group/lp-0. Where should I look?
>
> What happens if you just run "emerge -1 acct-group/lp"?
Same thing
> Have you done a successful "emerge -auDvN @system" ?
Yes
> There may well be something else required still missing, but not an
> explicit dependency because it is part of @system.
>
>
One thing I just re-discovered is --keep-going, which works, thank
goodness, so I'll should have a working system (sometime tomorrow!),
albeit, without cups.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [gentoo-user] could there be a problem with acct-group/lp? [RESOLVED]
2020-12-30 22:17 [gentoo-user] could there be a problem with acct-group/lp? n952162
2020-12-30 23:33 ` Jack
@ 2021-01-01 20:13 ` n952162
1 sibling, 0 replies; 13+ messages in thread
From: n952162 @ 2021-01-01 20:13 UTC (permalink / raw
To: gentoo-user
On 12/30/20 11:17 PM, n952162 wrote:
> When I try to restore my pkgs, after the --depclean, the emerge fails.
> It seems like there's an error in the pre-inst script of acct-group/lp?
> That's need by cups:
>
>
> 1270~/adm/gentoo/emerged>sudo cat
> /var/tmp/portage/acct-group/lp-0-r1/temp/build.log
> * Package: acct-group/lp-0-r1
> * Repository: gentoo
> * Maintainer: systemd@gentoo.org printing@gentoo.org
> * USE: abi_x86_64 amd64 elibc_glibc kernel_linux userland_GNU
> * FEATURES: network-sandbox preserve-libs sandbox userpriv usersandbox
> >>> Unpacking source...
> >>> Source unpacked in /var/tmp/portage/acct-group/lp-0-r1/work
> >>> Preparing source in /var/tmp/portage/acct-group/lp-0-r1/work ...
> >>> Source prepared.
> >>> Configuring source in /var/tmp/portage/acct-group/lp-0-r1/work ...
> >>> Source configured.
> >>> Compiling source in /var/tmp/portage/acct-group/lp-0-r1/work ...
> >>> Source compiled.
> >>> Test phase [not enabled]: acct-group/lp-0-r1
>
> >>> Install acct-group/lp-0-r1 into
> /var/tmp/portage/acct-group/lp-0-r1/image
> >>> Completed installing acct-group/lp-0-r1 into
> /var/tmp/portage/acct-group/lp-0-r1/image
>
> * Final size of build directory: 4 KiB
> * Final size of installed tree: 20 KiB
>
> * checking 1 files for package collisions
> >>> Merging acct-group/lp-0-r1 to /
> error writing group entry: Invalid argument
> * Adding group 'lp' to your system ...
> error writing group entry: Invalid argument
> * - Groupid: 7
> groupadd: group 'lp' already exists
> * ERROR: acct-group/lp-0-r1::gentoo failed (preinst phase):
> * (no error message)
> *
> * Call stack:
> * ebuild.sh, line 125: Called pkg_preinst
> * environment, line 1194: Called acct-group_pkg_preinst
> * environment, line 360: Called enewgroup 'lp' '7'
> * environment, line 735: Called die
> * The specific snippet of code:
> * groupadd -r ${opts} "${egroup}" || die
> *
> * If you need support, post the output of `emerge --info
> '=acct-group/lp-0-r1::gentoo'`,
> * the complete build log and the output of `emerge -pqv
> '=acct-group/lp-0-r1::gentoo'`.
> * The complete build log is located at
> '/var/tmp/portage/acct-group/lp-0-r1/temp/build.log'.
> * The ebuild environment file is located at
> '/var/tmp/portage/acct-group/lp-0-r1/temp/environment'.
> * Working directory: '/var/tmp/portage/acct-group/lp-0-r1/homedir'
> * S: '/var/tmp/portage/acct-group/lp-0-r1/work'
> !!! FAILED preinst: 1
>
>
>
Confirmed: I found a mistake on my system:
lp:x:7:lp:me
The last colon should be a comma.
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2021-01-01 20:18 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-12-30 22:17 [gentoo-user] could there be a problem with acct-group/lp? n952162
2020-12-30 23:33 ` Jack
2020-12-31 0:29 ` Michael
2020-12-31 7:34 ` n952162
2020-12-31 9:31 ` Neil Bothwick
2020-12-31 11:03 ` Michael
2020-12-31 13:14 ` Michael Orlitzky
2021-01-01 19:47 ` n952162
2021-01-01 19:50 ` n952162
2021-01-01 20:01 ` n952162
2020-12-31 7:20 ` n952162
2020-12-31 9:33 ` Neil Bothwick
2021-01-01 20:13 ` [gentoo-user] could there be a problem with acct-group/lp? [RESOLVED] n952162
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox