From: Mick <michaelkintzios@gmail.com>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] system uptime
Date: Sun, 30 Aug 2015 18:26:49 +0100 [thread overview]
Message-ID: <201508301826.50580.michaelkintzios@gmail.com> (raw)
In-Reply-To: <55E337C9.7030001@gmail.com>
[-- Attachment #1: Type: Text/Plain, Size: 2938 bytes --]
On Sunday 30 Aug 2015 18:05:13 Alan McKinnon wrote:
> On 30/08/2015 19:00, Dale wrote:
> > Alan McKinnon wrote:
> >> On 30/08/2015 17:56, Peter Humphrey wrote:
> >>> On Sunday 30 August 2015 00:04:43 Philip Webb wrote:
> >>>> How long do desktop users typically leave their systems between
> >>>> reboots ? How long between power off/on's ?
> >>>>
> >>>> I've long been in the habit of switching everything off while I sleep,
> >>>> then restarting after I've woken & got going again myself.
> >>>> However recently, I've run into delays getting my router
> >>>> (only 1 device attached) to shake hands successfully with my ISP's
> >>>> server, which have been requiring several power off/on's before it
> >>>> works. As a result, I've started rebooting only after my weekly
> >>>> system update -- it means I get to use the new versions of everything
> >>>> --
> >>>> & not powering off at all ; the monitor + Xscreensaver are off
> >>>> whenever I'm away from the machine for >= 1 hr (approx).
> >>>>
> >>>> Are there any pro's/con's I sb aware of ?
> >>>
> >>> No-one has yet mentioned taking backups. I'm still using a brute-force
> >>> approach, in which I shut down each of my two machines once a week to
> >>> make a backup to external disk. Otherwise they're on 24 hours a day
> >>> running BOINC projects. On the desktop PC kmail makes a daily archive
> >>> of messages, and once a day a cron job copies my user directory to
> >>> /home/<me>.bu/ .
> >>>
> >>> I know it burns energy but I'm prepared to make my small contribution
> >>> to what I think is a good cause.
> >>
> >> A desktop or laptop will typically draw far less power than a single 60W
> >> incandescent bulb. I bet you have quite a lot of those. Even if not, the
> >> CFLs you'll have to give you light at night still draw much much more
> >> than a computer.
> >>
> >> If saving energy is your personal driver, then you should be looking at
> >> water heaters, central heaters, aircon and stove as the main culprits.
> >> Everything else, whilst measurable, is a small drop in the bucket and
> >> probably not worth worrying about.
> >>
> >> Assuming of course that your computer is a desktop/laptop, and not a 42U
> >> cabinet jam packed full of Dell 2950s
> >
> > Don't forget the clothes dryer to, if you have one. Mine is electric
> > and it pulls as much as my water heater does. I just don't use it as
> > much is all.
>
> I forgot about that :-)
>
> Add in almost all laundry appliances and kitchen power tools too...
Modern appliances with Green stickers on them (whatever they're called) are
more efficient by design. To some extent this is also true with PCs. I still
have an old Pentium 4 32bit running a couple of test environments and back up
storage. I can assure you that the room gets hot after it has been running
for a couple of hours! :-)
--
Regards,
Mick
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
next prev parent reply other threads:[~2015-08-30 17:27 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-30 4:04 [gentoo-user] system uptime Philip Webb
2015-08-30 4:22 ` Dale
2015-08-30 5:08 ` covici
2015-08-30 7:54 ` Dale
2015-08-30 12:20 ` Mick
2015-08-30 12:33 ` Dale
2015-08-30 6:52 ` Walter Dnes
2015-08-30 9:41 ` Alan McKinnon
2015-08-30 11:08 ` Rich Freeman
2015-08-30 13:24 ` Michel Catudal
2015-08-30 15:24 ` Daniel Frey
2015-08-30 15:54 ` Alan McKinnon
2015-08-30 16:03 ` Rich Freeman
2015-08-30 13:26 ` Alan Mackenzie
2015-08-30 13:58 ` Rich Freeman
2015-08-30 14:21 ` Mick
2015-08-30 15:22 ` Volker Armin Hemmann
2015-08-30 13:54 ` Alec Ten Harmsel
2015-08-30 15:20 ` Volker Armin Hemmann
2015-08-30 15:56 ` Peter Humphrey
2015-08-30 16:01 ` Alan McKinnon
2015-08-30 17:00 ` Dale
2015-08-30 17:05 ` Alan McKinnon
2015-08-30 17:26 ` Mick [this message]
2015-08-30 17:50 ` Dale
2015-08-31 8:50 ` Peter Humphrey
2015-08-31 9:42 ` Alan McKinnon
2015-08-31 13:41 ` [OT] Was " Peter Humphrey
2015-08-31 14:39 ` Alan McKinnon
2015-08-31 15:04 ` [gentoo-user] Re: [OT] Was " James
2015-09-01 14:19 ` [OT] Was re: [gentoo-user] " Peter Humphrey
2015-08-31 21:58 ` Alan McKinnon
2015-08-30 16:06 ` Rich Freeman
2015-08-30 17:11 ` Michel Catudal
2015-08-30 17:56 ` Terry Z.
2015-09-03 15:32 ` Philip Webb
2015-09-03 17:25 ` Neil Bothwick
2015-09-03 18:12 ` Philip Webb
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201508301826.50580.michaelkintzios@gmail.com \
--to=michaelkintzios@gmail.com \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox