[gentoo-user] mpeg4ip - replacement

[gentoo-user] mpeg4ip - replacement

[Joseph]

Which application replaced "mpeg4ip" ?

I'm trying to streem mpeg4 video and in the past I was using "mpeg4ip" but I can not find it.

--
Joseph

Re: [gentoo-user] mpeg4ip - replacement

[Walter Dnes]

On Fri, Oct 24, 2014 at 05:40:21PM -0600, Joseph wrote
> Which application replaced "mpeg4ip" ?
> 
> I'm trying to streem mpeg4 video and in the past I was using "mpeg4ip"
> but I can not find it.

  I've been using mplayer for a long time.  Note that it has a lot of
flags to pick and choose from.  This includes some CPU-specific flags.

-- 
Walter Dnes <waltdnes@waltdnes.org>
I don't run "desktop environments"; I run useful applications

Re: [gentoo-user] mpeg4ip - replacement

[Joseph]

On 10/24/14 20:23, Walter Dnes wrote:
>On Fri, Oct 24, 2014 at 05:40:21PM -0600, Joseph wrote
>> Which application replaced "mpeg4ip" ?
>>
>> I'm trying to streem mpeg4 video and in the past I was using "mpeg4ip"
>> but I can not find it.
>
>  I've been using mplayer for a long time.  Note that it has a lot of
>flags to pick and choose from.  This includes some CPU-specific flags.
>
>-- 
>Walter Dnes <waltdnes@waltdnes.org>
>I don't run "desktop environments"; I run useful applications

I have mplayer installed with flags:
 Installed versions:  1.2_pre20130729(11:05:47 PM 09/19/2014)(X a52 alsa cdio dts dvd dvdnav enca encode gif iconv ipv6 jpeg libass live mad mmx mng mp3 network 
opengl osdmenu png sdl shm sse sse2 truetype unicode vorbis x264 xscreensaver xv xvid

but I can not streem mpeg-4 video from my remote camera.

-- 
Joseph

Re: [gentoo-user] mpeg4ip - replacement

[Joseph]

On 10/24/14 20:23, Walter Dnes wrote:
>On Fri, Oct 24, 2014 at 05:40:21PM -0600, Joseph wrote
>> Which application replaced "mpeg4ip" ?
>>
>> I'm trying to streem mpeg4 video and in the past I was using "mpeg4ip"
>> but I can not find it.
>
>  I've been using mplayer for a long time.  Note that it has a lot of
>flags to pick and choose from.  This includes some CPU-specific flags.
>
>-- 
>Walter Dnes <waltdnes@waltdnes.org>
>I don't run "desktop environments"; I run useful applications

I can stream mpeg-4 from camera locally using both: vlc and mplayer
but when I log-in from  remote computer not of them work.

-- 
Joseph

Re: [gentoo-user] mpeg4ip - replacement

[Joseph]

On 10/24/14 19:40, Joseph wrote:
>On 10/24/14 20:23, Walter Dnes wrote:
>>On Fri, Oct 24, 2014 at 05:40:21PM -0600, Joseph wrote
>>> Which application replaced "mpeg4ip" ?
>>>
>>> I'm trying to streem mpeg4 video and in the past I was using "mpeg4ip"
>>> but I can not find it.
>>
>>  I've been using mplayer for a long time.  Note that it has a lot of
>>flags to pick and choose from.  This includes some CPU-specific flags.
>>
>>--
>>Walter Dnes <waltdnes@waltdnes.org>
>>I don't run "desktop environments"; I run useful applications
>
>I can stream mpeg-4 from camera locally using both: vlc and mplayer
>but when I log-in from  remote computer not of them work.
>
>-- 
>Joseph

I'm getting the following error from "vlc" log:

main debug: processing request item: rtsp://66.18.xxx.xxx:554/mpeg4/media.amp, node: Playlist, skip: 0
main debug: resyncing on rtsp://66.18.xxx.xxx:554/mpeg4/media.amp
main debug: rtsp://66.18.xxx.xxx:554/mpeg4/media.amp is at 0
main debug: starting playback of the new playlist item
main debug: resyncing on rtsp://66.18.xxx.xxx:554/mpeg4/media.amp
main debug: rtsp://66.18.xxx.xxx:554/mpeg4/media.amp is at 0
main debug: creating new input thread
main debug: Creating an input for 'rtsp://66.18.xxx.xxx:554/mpeg4/media.amp'
main debug: using timeshift granularity of 50 MiB, in path '/tmp'
main debug: `rtsp://66.18.xxx.xxx:554/mpeg4/media.amp' gives access `rtsp' demux `' path `66.18.xxx.xxx:554/mpeg4/media.amp'
main debug: creating demux: access='rtsp' demux='' location='66.18.xxx.xxx:554/mpeg4/media.amp' file='(null)'
main debug: looking for access_demux module matching "rtsp": 10 candidates
main debug: no access_demux modules matched
main debug: creating access 'rtsp' location='66.18.xxx.xxx:554/mpeg4/media.amp', path='(null)'
main debug: looking for access module matching "rtsp": 18 candidates
main debug: no access modules matched
main error: open of `rtsp://66.18.xxx.xxx:554/mpeg4/media.amp' failed
main debug: finished input
main debug: dead input
main debug: changing item without a request (current 0/1)
main debug: nothing to play

What is error "no access_demux modules matched" is associated with?


-- 
Joseph

Re: [gentoo-user] mpeg4ip - replacement

[Neil Bothwick]

[-- Attachment #1: Type: text/plain, Size: 391 bytes --]

On Fri, 24 Oct 2014 20:29:17 -0600, Joseph wrote:

> looking for access module matching "rtsp": 18 candidates main debug: no
> access modules matched main error: open of
> `rtsp://66.18.xxx.xxx:554/mpeg4/media.amp' failed main debug: finished

Is VLC istalled with the rtsp USE flag?


-- 
Neil Bothwick

"Time is the best teacher....., unfortunately it kills all the students"

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [gentoo-user] mpeg4ip - replacement

[Joseph]

On 10/25/14 09:04, Neil Bothwick wrote:
>On Fri, 24 Oct 2014 20:29:17 -0600, Joseph wrote:
>
>> looking for access module matching "rtsp": 18 candidates main debug: no
>> access modules matched main error: open of
>> `rtsp://66.18.xxx.xxx:554/mpeg4/media.amp' failed main debug: finished
>
>Is VLC istalled with the rtsp USE flag?
>
>
>-- 
>Neil Bothwick

I just add the "rtsp" use flag and re-compile the vlc but I still getting an error:


main debug: processing request item: rtsp://66.18.xxx.xxx:554/mpeg4/media.amp, node: Playlist, skip: 0
main debug: resyncing on rtsp://66.18.xxx.xxx:554/mpeg4/media.amp
main debug: rtsp://66.18.xxx.xxx:554/mpeg4/media.amp is at 0
main debug: starting playback of the new playlist item
main debug: resyncing on rtsp://66.18.xxx.xxx:554/mpeg4/media.amp
main debug: rtsp://66.18.xxx.xxx:554/mpeg4/media.amp is at 0
main debug: creating new input thread
main debug: Creating an input for 'rtsp://66.18.xxx.xxx:554/mpeg4/media.amp'
main debug: using timeshift granularity of 50 MiB, in path '/tmp'
main debug: `rtsp://66.18.xxx.xxx:554/mpeg4/media.amp' gives access `rtsp' demux `' path `66.18.xxx.xxx:554/mpeg4/media.amp'
main debug: creating demux: access='rtsp' demux='' location='66.18.xxx.xxx:554/mpeg4/media.amp' file='(null)'
main debug: looking for access_demux module matching "rtsp": 10 candidates
main debug: no access_demux modules matched
main debug: creating access 'rtsp' location='66.18.xxx.xxx:554/mpeg4/media.amp', path='(null)'
main debug: looking for access module matching "rtsp": 19 candidates
main debug: net: connecting to 66.18.xxx.xxx port 554
qt4 debug: IM: Setting an input
main warning: connection timed out
access_realrtsp error: cannot connect to 66.18.xxx.xxx:554
access_realrtsp debug: could not connect to: 66.18.xxx.xxx:554/mpeg4/media.amp
main debug: no access modules matched
main error: open of `rtsp://66.18.xxx.xxx:554/mpeg4/media.amp' failed
main debug: dead input
main debug: changing item without a request (current 0/1)
main debug: nothing to play
qt4 debug: IM: Deleting the input

It seems like there is no "demux module matching "rtsp""

-- 
Joseph

Re: [gentoo-user] mpeg4ip - replacement

[Joseph]

On 10/25/14 09:35, Joseph wrote:
>On 10/25/14 09:04, Neil Bothwick wrote:
>>On Fri, 24 Oct 2014 20:29:17 -0600, Joseph wrote:
>>
>>> looking for access module matching "rtsp": 18 candidates main debug: no
>>> access modules matched main error: open of
>>> `rtsp://66.18.xxx.xxx:554/mpeg4/media.amp' failed main debug: finished
>>
>>Is VLC istalled with the rtsp USE flag?
>>
>>
>>--
>>Neil Bothwick
>
>I just add the "rtsp" use flag and re-compile the vlc but I still getting an error:
>
>
>main debug: processing request item: rtsp://66.18.xxx.xxx:554/mpeg4/media.amp, node: Playlist, skip: 0
>main debug: resyncing on rtsp://66.18.xxx.xxx:554/mpeg4/media.amp
>main debug: rtsp://66.18.xxx.xxx:554/mpeg4/media.amp is at 0
>main debug: starting playback of the new playlist item
>main debug: resyncing on rtsp://66.18.xxx.xxx:554/mpeg4/media.amp
>main debug: rtsp://66.18.xxx.xxx:554/mpeg4/media.amp is at 0
>main debug: creating new input thread
>main debug: Creating an input for 'rtsp://66.18.xxx.xxx:554/mpeg4/media.amp'
>main debug: using timeshift granularity of 50 MiB, in path '/tmp'
>main debug: `rtsp://66.18.xxx.xxx:554/mpeg4/media.amp' gives access `rtsp' demux `' path `66.18.xxx.xxx:554/mpeg4/media.amp'
>main debug: creating demux: access='rtsp' demux='' location='66.18.xxx.xxx:554/mpeg4/media.amp' file='(null)'
>main debug: looking for access_demux module matching "rtsp": 10 candidates
>main debug: no access_demux modules matched
>main debug: creating access 'rtsp' location='66.18.xxx.xxx:554/mpeg4/media.amp', path='(null)'
>main debug: looking for access module matching "rtsp": 19 candidates
>main debug: net: connecting to 66.18.xxx.xxx port 554
>qt4 debug: IM: Setting an input
>main warning: connection timed out
>access_realrtsp error: cannot connect to 66.18.xxx.xxx:554
>access_realrtsp debug: could not connect to: 66.18.xxx.xxx:554/mpeg4/media.amp
>main debug: no access modules matched
>main error: open of `rtsp://66.18.xxx.xxx:554/mpeg4/media.amp' failed
>main debug: dead input
>main debug: changing item without a request (current 0/1)
>main debug: nothing to play
>qt4 debug: IM: Deleting the input
>
>It seems like there is no "demux module matching "rtsp""
>
>-- 
>Joseph

On one of the forums someone suggested tat VLC does not support Apple's proprietary rtsp over http protocol.
(piece of crap Axis proprietary cameras)

-- 
Joseph

Re: [gentoo-user] mpeg4ip - replacement

[Walter Dnes]

On Fri, Oct 24, 2014 at 07:40:12PM -0600, Joseph wrote

> I can stream mpeg-4 from camera locally using both: vlc and mplayer
> but when I log-in from  remote computer not of them work.

  Does the remote computer have mplayer built with the same flags/codecs
as on your local computer?  Ignore the CPU-specific stuff.

  Can I assume that you're actually "streaming" from both computers?  Or
are you playing back a recorded file locally, as opposed to streaming
live from the remote?

-- 
Walter Dnes <waltdnes@waltdnes.org>
I don't run "desktop environments"; I run useful applications

Re: [gentoo-user] mpeg4ip - replacement

[Joseph]

On 10/25/14 01:54, Walter Dnes wrote:
>On Fri, Oct 24, 2014 at 07:40:12PM -0600, Joseph wrote
>
>> I can stream mpeg-4 from camera locally using both: vlc and mplayer
>> but when I log-in from  remote computer not of them work.
>
>  Does the remote computer have mplayer built with the same flags/codecs
>as on your local computer?  Ignore the CPU-specific stuff.
>
>  Can I assume that you're actually "streaming" from both computers?  Or
>are you playing back a recorded file locally, as opposed to streaming
>live from the remote?
>
>-- 
>Walter Dnes <waltdnes@waltdnes.org>
>I don't run "desktop environments"; I run useful applications

Well, the remote camera is Axis 207 so it has its own server. There is no mplayer on it.
When I access camera from the network computer the same as camera is on both vlc and mplayer work.
But when I try to stream over the internet (from different) it doesn't work.  

Can mpalyer stream the mpeg 4 video file over rtsp; I think only vlc can do it.

-- 
Joseph

Re: [gentoo-user] mpeg4ip - replacement

[Walter Dnes]

On Sat, Oct 25, 2014 at 09:41:20AM -0600, Joseph wrote

> Well, the remote camera is Axis 207 so it has its own server. There
> is no mplayer on it.  When I access camera from the network computer
> the same as camera is on both vlc and mplayer work.  But when I try
> to stream over the internet (from different) it doesn't work.
> 
> Can mpalyer stream the mpeg 4 video file over rtsp; I think only
> vlc can do it.

  You mentioned in a previous message that mplayer and vlc work on one
computer, but not on the other.  So we know they both work.  I think the
problem is somewhere in the remote access.  How are you accessing the
rtsp stream?  Is it like so (example name and numbers)...

mplayer rtsp://10.1.2.3/stream_name

  Things to check...

* if you're using a domain name rather than an IP address, is it defined
  in the remote machine's /etc/hosts ?

* is the remote machine's firewall blocking the camera's IP address ?

* is the camera set to only stream to a specific IP address (range) ?

-- 
Walter Dnes <waltdnes@waltdnes.org>
I don't run "desktop environments"; I run useful applications

Re: [gentoo-user] mpeg4ip - replacement

[Joseph]

On 10/25/14 13:51, Walter Dnes wrote:
>On Sat, Oct 25, 2014 at 09:41:20AM -0600, Joseph wrote
>
>> Well, the remote camera is Axis 207 so it has its own server. There
>> is no mplayer on it.  When I access camera from the network computer
>> the same as camera is on both vlc and mplayer work.  But when I try
>> to stream over the internet (from different) it doesn't work.
>>
>> Can mpalyer stream the mpeg 4 video file over rtsp; I think only
>> vlc can do it.
>
>  You mentioned in a previous message that mplayer and vlc work on one
>computer, but not on the other.  So we know they both work.  I think the
>problem is somewhere in the remote access.  How are you accessing the
>rtsp stream?  Is it like so (example name and numbers)...
>
>mplayer rtsp://10.1.2.3/stream_name
>
>  Things to check...
>
>* if you're using a domain name rather than an IP address, is it defined
>  in the remote machine's /etc/hosts ?
>
>* is the remote machine's firewall blocking the camera's IP address ?
>
>* is the camera set to only stream to a specific IP address (range) ?
>
>-- 
>Walter Dnes <waltdnes@waltdnes.org>
>I don't run "desktop environments"; I run useful applications

I can login and access the camera setting over the Internet, the only part that is not working is streaming over rtsp.
MotionJPEG works but that takes a lot of bandwidth. 

I think you are correct it might have something to do with firewall.

I've open port range: 50000 to 50999 and forward it to 10.10.0.127 (this is camera IP address on the other network).

When I try vlc:
Connection failed:
VLC could not connect to "66.18.xxx.xxx:554".
Your input can't be opened:
VLC is unable to open the MRL 'rtsp://66.18.xxx.xxx:554/mpeg4/media.amp'. Check the log for details.

I open port 9090 (tcp/udp) on the remote firewall and forward it to 10.10.0.127:80  
But I'm puzzled why is it trying to connect to: 66.18.xxx.xxx:554 
Maybe this is the problem. 

rtsp port 554 is enabled on the camera.

-- 
Joseph

Re: [gentoo-user] mpeg4ip - replacement

[Joseph]

On 10/25/14 13:51, Walter Dnes wrote:
>On Sat, Oct 25, 2014 at 09:41:20AM -0600, Joseph wrote
>
>> Well, the remote camera is Axis 207 so it has its own server. There
>> is no mplayer on it.  When I access camera from the network computer
>> the same as camera is on both vlc and mplayer work.  But when I try
>> to stream over the internet (from different) it doesn't work.
>>
>> Can mpalyer stream the mpeg 4 video file over rtsp; I think only
>> vlc can do it.
>
>  You mentioned in a previous message that mplayer and vlc work on one
>computer, but not on the other.  So we know they both work.  I think the
>problem is somewhere in the remote access.  How are you accessing the
>rtsp stream?  Is it like so (example name and numbers)...
>
>mplayer rtsp://10.1.2.3/stream_name
>
>  Things to check...
>
>* if you're using a domain name rather than an IP address, is it defined
>  in the remote machine's /etc/hosts ?
>
>* is the remote machine's firewall blocking the camera's IP address ?
>
>* is the camera set to only stream to a specific IP address (range) ?
>
>-- 
>Walter Dnes <waltdnes@waltdnes.org>
>I don't run "desktop environments"; I run useful applications

* I'm using only IP addresses no domain name.
* on the remote computer camera is on 10.10.0.127 IP address
so I open port 9090 and forwarded to IP  10.10.0.127:80 on the remote firewall

When I tried mplayer, I get:

mplayer rtsp://66.18.xxx.xxx:9090/mpeg4/media.amp
MPlayer SVN-r36370 (Gentoo)-4.7.3 (C) 2000-2013 MPlayer Team
MMX2 supported but disabled

Playing rtsp://66.18.xxx.xxx:9090/mpeg4/media.amp.
Resolving 66.18.xxx.xxx for AF_INET6...

Couldn't resolve name for AF_INET6: 66.18.xxx.xxx
Connecting to server 66.18.xxx.xxx[66.18.xxx.xxx]: 9090...

librtsp: server responds: 'HTTP/1.0 501 Not Implemented'
STREAM_LIVE555, URL: rtsp://66.18.xxx.xxx:9090/mpeg4/media.amp
Stream not seekable!
 file format detected.
Failed to get a SDP description from URL "rtsp://66.18.210.217:9090/mpeg4/media.amp": 501 Not Implemented


-- 
Joseph

Re: [gentoo-user] mpeg4ip - replacement

[Walter Dnes]

On Sat, Oct 25, 2014 at 01:18:27PM -0600, Joseph wrote

> Playing rtsp://66.18.xxx.xxx:9090/mpeg4/media.amp.
> Resolving 66.18.xxx.xxx for AF_INET6...
> 
> Couldn't resolve name for AF_INET6: 66.18.xxx.xxx

  Why is the machine doing anything IPV6-related for an IPV4 address?

> Failed to get a SDP description from URL

  Some bad news... you just published the entire URL, including the full
IPV4 address.  Take it offline *NOW*.

  Possibly some good news... you say that you can't access it remotely.
Does your ISP block servers on your account?  That may save you.

-- 
Walter Dnes <waltdnes@waltdnes.org>
I don't run "desktop environments"; I run useful applications

Re: [gentoo-user] mpeg4ip - replacement

[Joseph]

On 10/25/14 22:31, Walter Dnes wrote:
>On Sat, Oct 25, 2014 at 01:18:27PM -0600, Joseph wrote
>
>> Playing rtsp://66.18.xxx.xxx:9090/mpeg4/media.amp.
>> Resolving 66.18.xxx.xxx for AF_INET6...
>>
>> Couldn't resolve name for AF_INET6: 66.18.xxx.xxx
>
>  Why is the machine doing anything IPV6-related for an IPV4 address?
>
>> Failed to get a SDP description from URL
>
>  Some bad news... you just published the entire URL, including the full
>IPV4 address.  Take it offline *NOW*.

OH well, experiment over for now :-)  I'll obtain different IP from my provider.

>
>  Possibly some good news... you say that you can't access it remotely.
>Does your ISP block servers on your account?  That may save you.

No, they don't block anything.  Googling around, I'm not the only one with this problem. 

-- 
Joseph

Re: [gentoo-user] mpeg4ip - replacement

[Samuli Suominen]

On 25/10/14 02:40, Joseph wrote:
> Which application replaced "mpeg4ip" ?
>
> I'm trying to streem mpeg4 video and in the past I was using "mpeg4ip"
> but I can not find it.
>
> -- 
> Joseph
>

media-video/gpac has extended mpeg4 support
media-libs/libmp4v2 with USE="utils" has command lines utilities
media-video/atomicparsley or media-video/atomicparsley-wez

and of course, ffmpeg, libav, mplayer, ...

when mpeg4ip was removed in favour of the new (read: maintained)
libmp4v2 googlecode project,
these were the replacements, and users were able to accomplish whatever
mpeg4ip did with them

thanks,
samuli