From: Neil Bothwick <neil@digimed.co.uk>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] smartctrl drive error @60%
Date: Fri, 27 Jun 2014 21:54:32 +0100 [thread overview]
Message-ID: <20140627215432.003491a9@hactar.digimed.co.uk> (raw)
In-Reply-To: <201406271422.28115.michaelkintzios@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 961 bytes --]
On Fri, 27 Jun 2014 14:22:09 +0100, Mick wrote:
> > You tell cron where to mail reports by setting MAILTO=you@wherever at
> > the top of /etc/crontab. It will then mail you every time a cronjob
> > produces output.
>
> Or complete the /etc/ssmtp/ssmtp.conf and revaliases with the info I
> have sent you in this thread and set MAILTO=root in your /etc/crontab.
>
> I would think that your ISP providers in the US will be blocking
> outgoing port 25 to stop compromised MSWindows machines spamming the
> rest of us. If you use my suggestion there shouldn't be a problem.
It makes no difference whether you address it directly to your ISP
address or via an alias. The ISP won't block port 25 connections to its
own servers from its own customers, otherwise none of them could send
email at all!
--
Neil Bothwick
NOTE: In order to control energy costs the light at the end
of the tunnel has been shut off until further notice...
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
next prev parent reply other threads:[~2014-06-27 20:57 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-24 23:09 [gentoo-user] smartctrl drive error @60% Dale
2014-06-25 4:20 ` J. Roeleveld
2014-06-25 5:05 ` Dale
2014-06-25 7:26 ` J. Roeleveld
2014-06-25 7:43 ` Dale
2014-06-25 7:41 ` thegeezer
2014-06-25 7:49 ` Dale
2014-06-25 10:42 ` thegeezer
2014-06-25 13:15 ` Dale
2014-06-25 14:03 ` Rich Freeman
2014-06-25 15:54 ` Dale
2014-06-25 16:09 ` Neil Bothwick
2014-06-25 16:44 ` Mick
2014-06-25 17:29 ` Neil Bothwick
2014-06-25 22:16 ` Dale
2014-06-25 22:32 ` Rich Freeman
2014-06-26 2:07 ` Dale
2014-06-26 2:15 ` Rich Freeman
2014-06-26 4:57 ` Dale
2014-06-29 15:17 ` Frank Steinmetzger
2014-07-01 8:30 ` Dale
2014-07-01 8:46 ` Helmut Jarausch
2014-07-01 8:58 ` Dale
2014-07-01 9:06 ` Helmut Jarausch
2014-07-01 9:11 ` J. Roeleveld
2014-07-01 9:21 ` Dale
2014-07-01 10:19 ` J. Roeleveld
2014-07-01 12:36 ` Dale
2014-07-01 8:49 ` J. Roeleveld
2014-06-25 22:50 ` Neil Bothwick
2014-06-26 2:15 ` Dale
2014-06-26 5:56 ` Mick
2014-06-26 5:59 ` Mick
2014-06-26 14:14 ` Dale
2014-06-26 15:08 ` Neil Bothwick
2014-06-26 15:31 ` Dale
2014-06-27 13:22 ` Mick
2014-06-27 20:54 ` Neil Bothwick [this message]
2014-06-27 21:26 ` [gentoo-user] " Grant Edwards
2014-06-27 21:41 ` Rich Freeman
2014-06-28 7:48 ` [gentoo-user] " Mick
2014-06-28 8:37 ` Neil Bothwick
2014-06-28 11:54 ` Dale
2014-06-26 7:22 ` [gentoo-user] " Alberto Luaces
2014-06-26 10:11 ` [gentoo-user] " Neil Bothwick
2014-06-26 11:03 ` Dale
2014-06-26 11:24 ` Rich Freeman
2014-06-26 11:40 ` Dale
2014-06-26 0:38 ` Bill Kenworthy
2014-06-26 2:31 ` Dale
2014-06-26 17:39 ` [gentoo-user] " Grant Edwards
2014-06-28 11:55 ` Dale
2014-06-28 12:40 ` Neil Bothwick
2014-06-28 13:05 ` Dale
2014-06-28 13:08 ` Alan McKinnon
2014-06-28 13:58 ` Dale
2014-06-28 14:15 ` Dale
2014-06-28 14:50 ` Peter Humphrey
2014-06-28 16:00 ` Mick
2014-06-28 17:30 ` Dale
2014-06-25 16:38 ` [gentoo-user] " Rich Freeman
2014-06-26 2:13 ` Dale
2014-06-25 18:44 ` Douglas J Hunley
2014-06-25 18:50 ` Rich Freeman
2014-06-26 16:05 ` Dale
2014-06-26 0:00 ` David Haller
2014-06-26 2:40 ` Dale
2014-06-26 6:05 ` David Haller
2014-06-26 16:19 ` [gentoo-user] OT: power requirement (WAS: smartctrl drive error @60%) Frank Steinmetzger
2014-06-26 17:05 ` Daniel Frey
2014-06-26 23:01 ` Bill Kenworthy
2014-06-26 17:31 ` Dale
2014-06-25 16:55 ` [gentoo-user] smartctrl drive error @60% Volker Armin Hemmann
2014-06-25 17:06 ` Rich Freeman
2014-06-25 17:15 ` Volker Armin Hemmann
2014-06-25 17:44 ` Rich Freeman
2014-06-25 21:19 ` J. Roeleveld
2014-06-26 3:45 ` Dale
2014-06-26 1:16 ` Daniel Frey
2014-06-26 3:54 ` Dale
2014-06-26 10:05 ` Neil Bothwick
2014-06-26 10:54 ` Dale
2014-06-26 10:52 ` Alan McKinnon
2014-06-26 11:20 ` Dale
2014-06-26 12:57 ` Alan McKinnon
2014-06-26 13:58 ` Dale
2014-06-26 17:14 ` Daniel Frey
2014-06-26 17:21 ` Daniel Frey
2014-06-25 21:11 ` Dale
2014-06-25 9:46 ` Neil Bothwick
2014-06-25 10:05 ` Dale
2014-06-25 10:55 ` thegeezer
2014-06-25 11:02 ` Helmut Jarausch
2014-06-25 13:21 ` covici
2014-06-25 12:33 ` Rich Freeman
2014-06-25 14:23 ` Neil Bothwick
2014-06-25 14:29 ` Rich Freeman
2014-06-25 16:00 ` Dale
2014-06-25 15:30 ` covici
2014-06-25 16:34 ` Rich Freeman
2014-06-25 17:58 ` Alan McKinnon
2014-06-25 12:30 ` Dale
2014-06-25 7:35 ` Marc Joliet
2014-06-29 3:27 ` Dale
2014-06-29 3:34 ` Rich Freeman
2014-06-29 4:44 ` Dale
2014-06-29 7:38 ` Mick
2014-06-29 8:42 ` Dale
2014-06-29 9:40 ` Mick
2014-06-29 12:05 ` Rich Freeman
2014-06-29 12:30 ` Dale
2014-07-01 5:52 ` Mick
2014-07-01 6:09 ` J. Roeleveld
2014-07-01 7:21 ` Dale
2014-07-01 10:48 ` Rich Freeman
2014-07-01 10:55 ` Alan McKinnon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140627215432.003491a9@hactar.digimed.co.uk \
--to=neil@digimed.co.uk \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox