From: Joseph <syscon780@gmail.com>
To: gentoo-user@lists.gentoo.org
Subject: [gentoo-user] Nvidia driver - blank screen not even console display
Date: Thu, 21 Feb 2013 23:14:34 -0700 [thread overview]
Message-ID: <20130222061434.GA3566@syscon7.inet> (raw)
I just upgraded system including kernel to 3.5.7 because of udev-197
Now I have a blank screen, not even console login (I can only access is via ssh)
Here is Xorg.0.log
[ 55.449] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 55.449] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 55.449] (==) NVIDIA(0): RGB weight 888
[ 55.449] (==) NVIDIA(0): Default visual is TrueColor
[ 55.449] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 55.449] (**) NVIDIA(0): Enabling 2D acceleration
[ 55.449] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[ 55.449] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[ 55.449] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[ 55.449] (EE) NVIDIA(0): you continue to encounter problems, Please try
[ 55.449] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
[ 67.826] (II) NVIDIA(GPU-0): Display (BenQ V2400W (DFP-1)) does not support NVIDIA 3D
[ 67.826] (II) NVIDIA(GPU-0): Vision stereo.
[ 67.827] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 450 (GF116) at PCI:1:0:0 (GPU-0)
[ 67.827] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 67.827] (--) NVIDIA(0): VideoBIOS: 70.26.29.00.00
[ 67.827] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 67.827] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 70.833] (--) NVIDIA(0): Valid display device(s) on GeForce GTS 450 at PCI:1:0:0
[ 70.833] (--) NVIDIA(0): CRT-0
[ 70.833] (--) NVIDIA(0): CRT-1
[ 70.833] (--) NVIDIA(0): DFP-0
[ 70.833] (--) NVIDIA(0): BenQ V2400W (DFP-1) (connected)
[ 70.833] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 70.833] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 70.833] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 70.833] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 70.833] (--) NVIDIA(0): BenQ V2400W (DFP-1): 165.0 MHz maximum pixel clock
[ 70.833] (--) NVIDIA(0): BenQ V2400W (DFP-1): Internal Single Link TMDS
[ 70.833] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 70.833] (**) NVIDIA(0): device BenQ V2400W (DFP-1) (Using EDID frequencies has
[ 70.833] (**) NVIDIA(0): been enabled on all display devices.)
[ 70.834] (WW) NVIDIA(GPU-0): The EDID for BenQ V2400W (DFP-1) contradicts itself: mode
[ 70.834] (WW) NVIDIA(GPU-0): "720x480" is specified in the EDID; however, the EDID's
[ 70.834] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-94.000 kHz) would exclude
[ 70.834] (WW) NVIDIA(GPU-0): this mode's HorizSync (15.7 kHz); ignoring HorizSync check
[ 70.834] (WW) NVIDIA(GPU-0): for mode "720x480".
[ 70.835] (==) NVIDIA(0):
[ 70.835] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 70.835] (==) NVIDIA(0): will be used as the requested mode.
[ 70.835] (==) NVIDIA(0):
[ 70.835] (II) NVIDIA(0): Validated MetaModes:
[ 70.835] (II) NVIDIA(0): "DFP-1:nvidia-auto-select"
[ 70.835] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
[ 70.863] (--) NVIDIA(0): DPI set to (93, 95); computed from "UseEdidDpi" X config
[ 70.863] (--) NVIDIA(0): option
[ 70.863] (--) Depth 24 pixmap format is 32 bpp
[ 70.863] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 70.863] (II) NVIDIA: access.
[ 70.867] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 70.867] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 70.867] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 70.867] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 70.867] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 70.867] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 70.867] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 70.867] (II) NVIDIA(0): Config Options in the README.
[ 73.872] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[ 80.897] (EE)
[ 80.897] (EE) Backtrace:
[ 80.898] (EE) 0: /usr/bin/X (xorg_backtrace+0x36) [0x5979d6]
[ 80.898] (EE) 1: /usr/bin/X (0x400000+0x19b8c9) [0x59b8c9]
[ 80.898] (EE) 2: /lib64/libpthread.so.0 (0x7fcdd1510000+0x10810) [0x7fcdd1520810]
[ 80.898] (EE) 3: /lib64/libc.so.6 (0x7fcdd0170000+0x136284) [0x7fcdd02a6284]
[ 80.898] (EE) 4: /usr/lib64/xorg/modules/drivers/nvidia_drv.so (0x7fcdce668000+0x116fd3) [0x7fcdce77efd3]
[ 80.898] (EE) 5: /usr/lib64/xorg/modules/drivers/nvidia_drv.so (0x7fcdce668000+0x1172ed) [0x7fcdce77f2ed]
[ 80.898] (EE) 6: /usr/lib64/xorg/modules/drivers/nvidia_drv.so (0x7fcdce668000+0xab654) [0x7fcdce713654]
[ 80.898] (EE) 7: /usr/lib64/xorg/modules/drivers/nvidia_drv.so (0x7fcdce668000+0xe64e1) [0x7fcdce74e4e1]
[ 80.898] (EE) 8: /usr/lib64/xorg/modules/drivers/nvidia_drv.so (0x7fcdce668000+0xb87ed) [0x7fcdce7207ed]
[ 80.898] (EE) 9: /usr/lib64/xorg/modules/drivers/nvidia_drv.so (0x7fcdce668000+0x55a3d2) [0x7fcdcebc23d2]
[ 80.898] (EE) 10: /usr/bin/X (AddScreen+0x88) [0x439928]
[ 80.898] (EE) 11: /usr/bin/X (InitOutput+0x3fc) [0x47d09c]
[ 80.898] (EE) 12: /usr/bin/X (0x400000+0x280e3) [0x4280e3]
[ 80.898] (EE) 13: /lib64/libc.so.6 (__libc_start_main+0xec) [0x7fcdd01924cc]
[ 80.898] (EE) 14: /usr/bin/X (0x400000+0x27e09) [0x427e09]
[ 80.898] (EE)
[ 80.898] (EE) Segmentation fault at address 0x7fcdd219fff0
[ 80.898]
Fatal server error:
[ 80.898] Caught signal 11 (Segmentation fault). Server aborting
[ 80.898]
[ 80.898] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 80.898] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 80.898] (EE)
[ 80.900] Server terminated with error (1). Closing log file.
cat /etc/X11/xorg.conf
# uncomment when the card gets IN
Section "Device"
Identifier "Nvidia card"
Driver "nvidia"
EndSection
eselect opengl list
Available OpenGL implementations:
[1] nvidia
[2] xorg-x11 *
I run: emerge -1av $(qlist -IC x11-drivers)
but it doesn't help
--
Joseph
next reply other threads:[~2013-02-22 6:14 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-22 6:14 Joseph [this message]
2013-02-22 7:22 ` [gentoo-user] Nvidia driver - blank screen not even console display Canek Peláez Valdés
2013-02-22 7:34 ` Joseph
2013-02-22 8:10 ` Alexandre Domi
2013-02-22 8:24 ` Joseph
2013-02-22 8:36 ` Dale
2013-02-22 8:50 ` Joseph
2013-02-22 8:59 ` Dale
2013-02-22 9:29 ` Joseph
2013-02-22 8:51 ` Joseph
2013-02-22 8:52 ` Alexandre Domi
2013-02-22 9:07 ` Joseph
2013-02-22 9:14 ` Alexandre Domi
2013-02-22 9:21 ` Joseph
2013-02-22 9:33 ` Dale
2013-02-22 9:41 ` Joseph
2013-02-22 9:35 ` Joseph
2013-02-22 9:39 ` Joseph
2013-02-22 9:49 ` Raffaele BELARDI
2013-02-22 10:15 ` Joseph
2013-02-22 10:28 ` Raffaele BELARDI
2013-02-22 12:17 ` Dale
2013-02-22 12:42 ` Joseph
2013-02-22 12:53 ` Dale
2013-02-22 20:26 ` Joseph
2013-02-22 23:41 ` Dale
2013-02-22 10:26 ` Joseph
2013-02-24 3:39 ` Joseph
2013-02-23 1:26 ` [gentoo-user] " walt
2013-02-23 3:03 ` Joseph
2013-02-23 5:24 ` Nikos Chantziaras
2013-02-23 7:32 ` Joseph
2013-02-23 8:55 ` Neil Bothwick
2013-02-23 22:53 ` Joseph
2013-02-24 9:08 ` Nikos Chantziaras
2013-02-23 22:39 ` Joseph
2013-02-23 22:49 ` Randolph Maaßen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130222061434.GA3566@syscon7.inet \
--to=syscon780@gmail.com \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox