[gentoo-user] sane and xinetd

[gentoo-user] sane and xinetd

[Silvio Siefke]

Hello,

i try to run the scanner over Network, but something sane not like in 
the configuration.

<log>
Jan 18 22:15:54 gentoo-mobile xinetd[25116]: START: sane-port pid=25153 from=192.168.2.22
Jan 18 22:15:54 gentoo-mobile saned[25153]: saned from sane-backends 1.0.23 ready
Jan 18 22:15:54 gentoo-mobile saned[25153]: check_host: access by remote host: 192.168.2.22
Jan 18 22:15:54 gentoo-mobile saned[25153]: check_host: gethostbyname for local hostname failed: Unknown host
Jan 18 22:15:54 gentoo-mobile saned[25153]: init: access granted to siefke@192.168.2.22
Jan 18 22:15:58 gentoo-mobile saned[25153]: saned exiting
Jan 18 22:15:58 gentoo-mobile xinetd[25116]: EXIT: sane-port status=0 pid=25153 duration=4(sec)
</log>

But on the client xsane say "no device" . 

gpasswd -a siefke scanner i have make

config on server:
gpasswd -a saned scanner 

gentoo-mobile xinetd.d # cat /etc/xinetd.d/saned 
service sane-port
{
  socket_type = stream
  server = /usr/sbin/saned
  protocol = tcp
  user = saned
  group = scanner
  wait = no
  disable = no
}

The IPs are correct set in /etc/sane.d/saned.conf on the server and
on client in /etc/sane.d/net.conf. 


Has anyone a idea whereis the problem?


Thanks for help. Greetings
Silvio