* [gentoo-user] problem starting "openvpn" after recenet upgrade
@ 2012-12-27 5:52 Joseph
2012-12-27 6:02 ` Joseph
2012-12-27 15:00 ` [gentoo-user] " Jörg Schaible
0 siblings, 2 replies; 6+ messages in thread
From: Joseph @ 2012-12-27 5:52 UTC (permalink / raw
To: gentoo-user
I'm having problem starting openvpn after recent upgrade.
When I try to start it I get a normal respond:
openvpn.client_clinic_atom start
* Starting openvpn.client_clinic_atom ... [ ok ]
* WARNING: openvpn.client_clinic_atom has started, but is inactive
but ifconfig is not showing this connection in addition it looks strange, not as it used to:
ifconfig
eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.0.100 netmask 255.255.255.0 broadcast 10.0.0.255
inet6 fe80::21b:21ff:feb8:27b6 prefixlen 64 scopeid 0x20<link>
ether 00:1b:21:b8:27:b6 txqueuelen 1000 (Ethernet)
RX packets 16129 bytes 9087618 (8.6 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 15573 bytes 2667489 (2.5 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 16 memory 0xfddc0000-fdde0000
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 1218 bytes 1433926 (1.3 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1218 bytes 1433926 (1.3 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
--
Joseph
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [gentoo-user] problem starting "openvpn" after recenet upgrade
2012-12-27 5:52 [gentoo-user] problem starting "openvpn" after recenet upgrade Joseph
@ 2012-12-27 6:02 ` Joseph
2012-12-27 15:00 ` [gentoo-user] " Jörg Schaible
1 sibling, 0 replies; 6+ messages in thread
From: Joseph @ 2012-12-27 6:02 UTC (permalink / raw
To: gentoo-user
I forgot to mention, my link looks normal:
openvpn.client_clinic_atom -> /etc/init.d/openvpn
--
Joseph
On 12/26/12 22:52, Joseph wrote:
>I'm having problem starting openvpn after recent upgrade.
>
>When I try to start it I get a normal respond:
>
>openvpn.client_clinic_atom start
> * Starting openvpn.client_clinic_atom ... [ ok ]
> * WARNING: openvpn.client_clinic_atom has started, but is inactive
>
>but ifconfig is not showing this connection in addition it looks strange, not as it used to:
>
>ifconfig
>eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
> inet 10.0.0.100 netmask 255.255.255.0 broadcast 10.0.0.255
> inet6 fe80::21b:21ff:feb8:27b6 prefixlen 64 scopeid 0x20<link>
> ether 00:1b:21:b8:27:b6 txqueuelen 1000 (Ethernet)
> RX packets 16129 bytes 9087618 (8.6 MiB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 15573 bytes 2667489 (2.5 MiB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
> device interrupt 16 memory 0xfddc0000-fdde0000
>
>lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436
> inet 127.0.0.1 netmask 255.0.0.0
> inet6 ::1 prefixlen 128 scopeid 0x10<host>
> loop txqueuelen 0 (Local Loopback)
> RX packets 1218 bytes 1433926 (1.3 MiB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 1218 bytes 1433926 (1.3 MiB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>
>--
>Joseph
^ permalink raw reply [flat|nested] 6+ messages in thread
* [gentoo-user] Re: problem starting "openvpn" after recenet upgrade
2012-12-27 5:52 [gentoo-user] problem starting "openvpn" after recenet upgrade Joseph
2012-12-27 6:02 ` Joseph
@ 2012-12-27 15:00 ` Jörg Schaible
2012-12-27 16:54 ` Joseph
1 sibling, 1 reply; 6+ messages in thread
From: Jörg Schaible @ 2012-12-27 15:00 UTC (permalink / raw
To: gentoo-user
Joseph wrote:
> I'm having problem starting openvpn after recent upgrade.
>
> When I try to start it I get a normal respond:
>
> openvpn.client_clinic_atom start
> * Starting openvpn.client_clinic_atom ... [ ok ]
> * WARNING: openvpn.client_clinic_atom has started, but is inactive
>
> but ifconfig is not showing this connection in addition it looks strange,
> not as it used to:
>
> ifconfig
> eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
> inet 10.0.0.100 netmask 255.255.255.0 broadcast 10.0.0.255
> inet6 fe80::21b:21ff:feb8:27b6 prefixlen 64 scopeid 0x20<link>
> ether 00:1b:21:b8:27:b6 txqueuelen 1000 (Ethernet)
> RX packets 16129 bytes 9087618 (8.6 MiB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 15573 bytes 2667489 (2.5 MiB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
> device interrupt 16 memory 0xfddc0000-fdde0000
>
> lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436
> inet 127.0.0.1 netmask 255.0.0.0
> inet6 ::1 prefixlen 128 scopeid 0x10<host>
> loop txqueuelen 0 (Local Loopback)
> RX packets 1218 bytes 1433926 (1.3 MiB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 1218 bytes 1433926 (1.3 MiB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>
Known problem. Rebuild openvpn and it works again. The build adds some hard
coded paths for some net-tools utilities and the location of ifconfig has
changed :-/
- Jörg
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [gentoo-user] Re: problem starting "openvpn" after recenet upgrade
2012-12-27 15:00 ` [gentoo-user] " Jörg Schaible
@ 2012-12-27 16:54 ` Joseph
2012-12-27 17:55 ` Matthias Hanft
0 siblings, 1 reply; 6+ messages in thread
From: Joseph @ 2012-12-27 16:54 UTC (permalink / raw
To: gentoo-user
On 12/27/12 16:00, Jörg Schaible wrote:
>Joseph wrote:
>
>> I'm having problem starting openvpn after recent upgrade.
>>
>> When I try to start it I get a normal respond:
>>
>> openvpn.client_clinic_atom start
>> * Starting openvpn.client_clinic_atom ... [ ok ]
>> * WARNING: openvpn.client_clinic_atom has started, but is inactive
>>
>> but ifconfig is not showing this connection in addition it looks strange,
>> not as it used to:
>>
>> ifconfig
>> eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
>> inet 10.0.0.100 netmask 255.255.255.0 broadcast 10.0.0.255
>> inet6 fe80::21b:21ff:feb8:27b6 prefixlen 64 scopeid 0x20<link>
>> ether 00:1b:21:b8:27:b6 txqueuelen 1000 (Ethernet)
>> RX packets 16129 bytes 9087618 (8.6 MiB)
>> RX errors 0 dropped 0 overruns 0 frame 0
>> TX packets 15573 bytes 2667489 (2.5 MiB)
>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>> device interrupt 16 memory 0xfddc0000-fdde0000
>>
>> lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436
>> inet 127.0.0.1 netmask 255.0.0.0
>> inet6 ::1 prefixlen 128 scopeid 0x10<host>
>> loop txqueuelen 0 (Local Loopback)
>> RX packets 1218 bytes 1433926 (1.3 MiB)
>> RX errors 0 dropped 0 overruns 0 frame 0
>> TX packets 1218 bytes 1433926 (1.3 MiB)
>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>
>
>Known problem. Rebuild openvpn and it works again. The build adds some hard
>coded paths for some net-tools utilities and the location of ifconfig has
>changed :-/
>
>- Jörg
Yes, you are correct. Rebuilding openvpn worked; thank you.
....{@} * {@} * {@} Happy New Year!
{@} * {@} * {@} * {@} Wish you extra ordinary good luck!
{@} * {@} * {@}
\ \ \ 2013 / / /
--
Joseph
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [gentoo-user] Re: problem starting "openvpn" after recenet upgrade
2012-12-27 16:54 ` Joseph
@ 2012-12-27 17:55 ` Matthias Hanft
2012-12-27 19:56 ` [gentoo-user] " Jörg Schaible
0 siblings, 1 reply; 6+ messages in thread
From: Matthias Hanft @ 2012-12-27 17:55 UTC (permalink / raw
To: gentoo-user
Joseph wrote:
>
> Yes, you are correct. Rebuilding openvpn worked; thank you.
As far as I have seen, you can set USE="iproute2" for OpenVPN which
seems to use iproute2 instead of net-tools - should avoid your problem,
too.
-Matt
^ permalink raw reply [flat|nested] 6+ messages in thread
* [gentoo-user] Re: Re: problem starting "openvpn" after recenet upgrade
2012-12-27 17:55 ` Matthias Hanft
@ 2012-12-27 19:56 ` Jörg Schaible
0 siblings, 0 replies; 6+ messages in thread
From: Jörg Schaible @ 2012-12-27 19:56 UTC (permalink / raw
To: gentoo-user
Matthias Hanft wrote:
> Joseph wrote:
>>
>> Yes, you are correct. Rebuilding openvpn worked; thank you.
>
> As far as I have seen, you can set USE="iproute2" for OpenVPN which
> seems to use iproute2 instead of net-tools - should avoid your problem,
> too.
If iprout2 is relocated, it will fail for openvpn exactly the same miserably
way.
- Jörg
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-12-27 19:58 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-12-27 5:52 [gentoo-user] problem starting "openvpn" after recenet upgrade Joseph
2012-12-27 6:02 ` Joseph
2012-12-27 15:00 ` [gentoo-user] " Jörg Schaible
2012-12-27 16:54 ` Joseph
2012-12-27 17:55 ` Matthias Hanft
2012-12-27 19:56 ` [gentoo-user] " Jörg Schaible
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox