[gentoo-user] static IP issue

[gentoo-user] static IP issue

[pat]

Hello,

I've installed Gentoo into VirtualBox. I want it to has static IP address and
I've followed Hand book instructions and the OpenRC/net.example. After reboot
there's a warning: "WARNING: net.lo has already been started" and each network
depending service failes to start with: "<service_name>: waiting for net.eth0
(51)"; where the 51 is a time which decrements to 0.

I've searched net, but without success :-\

Can someone help me? The installation is fresh one.

Thanks

     Pat

----------------------------------------
Freehosting PIPNI - http://www.pipni.cz/

Re: [gentoo-user] static IP issue

[Michael Hampicke]

[-- Attachment #1: Type: text/plain, Size: 652 bytes --]

2012/9/6 pat <pat@xvalheru.org>

> Hello,
>
> I've installed Gentoo into VirtualBox. I want it to has static IP address
> and
> I've followed Hand book instructions and the OpenRC/net.example. After
> reboot
> there's a warning: "WARNING: net.lo has already been started" and each
> network
> depending service failes to start with: "<service_name>: waiting for
> net.eth0
> (51)"; where the 51 is a time which decrements to 0.
>
> I've searched net, but without success :-\
>
> Can someone help me? The installation is fresh one.


Did you create a symlink for /etc/init.d/net.eth0 and did you add it to the
runlevel (rc-update add net.eth0 default)?

[-- Attachment #2: Type: text/html, Size: 983 bytes --]

Re: [gentoo-user] static IP issue

[pat]

[-- Attachment #1: Type: text/plain, Size: 898 bytes --]

On Thu, 6 Sep 2012 14:10:21 +0200, Michael Hampicke wrote
> 2012/9/6 pat <pat@xvalheru.org>
>Hello,
>
> I&#39;ve installed Gentoo into VirtualBox. I want it to has static IP address and
> I&#39;ve followed Hand book instructions and the OpenRC/net.example. After reboot
> there&#39;s a warning: "WARNING: net.lo has already been started" and each network
> depending service failes to start with: "<service_name>: waiting for net.eth0
> (51)"; where the 51 is a time which decrements to 0.
>
> I&#39;ve searched net, but without success :-\
>
> Can someone help me? The installation is fresh one.
>
> Did you create a symlink for /etc/init.d/net.eth0 and did you add it to the runlevel (rc-update add net.eth0 default)?

Hi,

Yes, I did. When the Gentoo boots to shell there&#39;s only loop back interface.

Pat

 


----------------------------------------
Freehosting PIPNI - http://www.pipni.cz/

[-- Attachment #2: Type: text/html, Size: 1689 bytes --]

Re: [gentoo-user] static IP issue

[Neil Bothwick]

[-- Attachment #1: Type: text/plain, Size: 254 bytes --]

On Thu, 6 Sep 2012 13:21:43 +0100, pat wrote:

> Yes, I did. When the Gentoo boots to shell there's only loop back
> interface.

Please post contents of /etc/conf.d/net


-- 
Neil Bothwick

Top Oxymorons Number 5: Twelve-ounce pound cake

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: [gentoo-user] static IP issue

[pat]

[-- Attachment #1: Type: text/plain, Size: 428 bytes --]

On Thu, 6 Sep 2012 14:00:22 +0100, Neil Bothwick wrote
> On Thu, 6 Sep 2012 13:21:43 +0100, pat wrote:
> 
> > Yes, I did. When the Gentoo boots to shell there's only loop back
> > interface.
> 
> Please post contents of /etc/conf.d/net
> 
> -- 
> Neil Bothwick
> 
> Top Oxymorons Number 5: Twelve-ounce pound cake

Here it is.

Thanks

     Pat


----------------------------------------
Freehosting PIPNI - http://www.pipni.cz/

[-- Attachment #2: net --]
[-- Type: application/octet-stream, Size: 381 bytes --]

# This blank configuration will automatically use DHCP for any net.*
# scripts in /etc/init.d.  To create a more complete configuration,
# please review /usr/share/doc/openrc*/net.example* and save your configuration
# in /etc/conf.d/net (this file :]!).

config_eth0="192.168.74.101 netmask 255.255.255.0"
#routes_eth0="default via 8.8.8.8"
routes_eth0="default via 192.168.74.1"

Re: [gentoo-user] static IP issue

[Walter Dnes]

On Thu, Sep 06, 2012 at 02:13:04PM +0100, pat wrote
> On Thu, 6 Sep 2012 14:00:22 +0100, Neil Bothwick wrote
> > 
> > Please post contents of /etc/conf.d/net
> > 
> > -- 
> > Neil Bothwick
> > 
> > Top Oxymorons Number 5: Twelve-ounce pound cake
> 
> Here it is.

config_eth0="192.168.74.101 netmask 255.255.255.0"
#routes_eth0="default via 8.8.8.8"
routes_eth0="default via 192.168.74.1"

  I assume 192.168.74.1 is your modem.  Correct?  No mention of
broadcast address.  I don't know if that's critical or not.  Try either
of the following...

config_eth0="192.168.74.101 netmask 255.255.255.0 broadcast 192.168.74.255"
routes_eth0="default via 192.168.74.1"

or

config_eth0="192.168.74.101/24 broadcast 192.168.74.255"
routes_eth0="default via 192.168.74.1"

-- 
Walter Dnes <waltdnes@waltdnes.org>
I don't run "desktop environments"; I run useful applications

Re: [gentoo-user] static IP issue

[pat]

On Fri, 7 Sep 2012 00:14:00 -0400, Walter Dnes wrote
> On Thu, Sep 06, 2012 at 02:13:04PM +0100, pat wrote
> > On Thu, 6 Sep 2012 14:00:22 +0100, Neil Bothwick wrote
> > > 
> > > Please post contents of /etc/conf.d/net
> > > 
> > > -- 
> > > Neil Bothwick
> > > 
> > > Top Oxymorons Number 5: Twelve-ounce pound cake
> > 
> > Here it is.
> 
> config_eth0="192.168.74.101 netmask 255.255.255.0"
> #routes_eth0="default via 8.8.8.8"
> routes_eth0="default via 192.168.74.1"
> 
>   I assume 192.168.74.1 is your modem.  Correct?  No mention of
> broadcast address.  I don't know if that's critical or not.  Try either
> of the following...
> 
> config_eth0="192.168.74.101 netmask 255.255.255.0 broadcast 192.168.74.255"
> routes_eth0="default via 192.168.74.1"
> 
> or
> 
> config_eth0="192.168.74.101/24 broadcast 192.168.74.255"
> routes_eth0="default via 192.168.74.1"
> 
> -- 
> Walter Dnes <waltdnes@waltdnes.org>
> I don't run "desktop environments"; I run useful applications
> 

Doesn't help :-(

Thanks

     Pat


----------------------------------------
Freehosting PIPNI - http://www.pipni.cz/

Re: [gentoo-user] static IP issue

[Michael Hampicke]

[-- Attachment #1: Type: text/plain, Size: 212 bytes --]

>
>
> Yes, I did. When the Gentoo boots to shell there's only loop back
> interface.
>

Are you sure that the kernel module for your network interface is loaded?

What's the output of ifconfig -a after a reboot?

[-- Attachment #2: Type: text/html, Size: 425 bytes --]

Re: [gentoo-user] static IP issue

[pat]

On Thu, 6 Sep 2012 16:23:57 +0200, Michael Hampicke wrote
 >  
 >
 > Yes, I did. When the Gentoo boots to shell there's only loop back interface. 
 >
 > Are you sure that the kernel module for your network interface is loaded?
 >
 > What's the output of ifconfig -a after a reboot?

ifconfig -a gives:
eth0      Link encap:Ethernet  HWaddr 08:00:27:26:80:c5  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:28 errors:0 dropped:0 overruns:0 frame:0
          TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:1988 (1.9 KiB)  TX bytes:1988 (1.9 KiB)

sit0      Link encap:IPv6-in-IPv4  
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

and I didn't compile driver as module but into kernel and when I switch to
dynamic IP address it works OK, so this is (probably) not issue of the driver.

     Pat


----------------------------------------
Freehosting PIPNI - http://www.pipni.cz/

Re: [gentoo-user] static IP issue

[Mark Knecht]

On Thu, Sep 6, 2012 at 4:33 AM, pat <pat@xvalheru.org> wrote:
> Hello,
>
> I've installed Gentoo into VirtualBox. I want it to has static IP address and
> I've followed Hand book instructions and the OpenRC/net.example. After reboot
> there's a warning: "WARNING: net.lo has already been started" and each network
> depending service failes to start with: "<service_name>: waiting for net.eth0
> (51)"; where the 51 is a time which decrements to 0.
>
> I've searched net, but without success :-\
>
> Can someone help me? The installation is fresh one.
>
> Thanks
>
>      Pat
>
> ----------------------------------------
> Freehosting PIPNI - http://www.pipni.cz/
>
>

I have a 32-bit Gentoo Virtualbox VM where I am actually sending this
email from. No problems with having a static IP:

gentoo-32b ~ # ifconfig -a
eth0      Link encap:Ethernet  HWaddr 08:00:27:d4:6a:35
          inet addr:192.168.1.125  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::a00:27ff:fed4:6a35/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:103 errors:0 dropped:0 overruns:0 frame:0
          TX packets:108 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:10493 (10.2 KiB)  TX bytes:9152 (8.9 KiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

sit0      Link encap:IPv6-in-IPv4
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

gentoo-32b ~ # cat /etc/conf.d/net
net      network
gentoo-32b ~ # cat /etc/conf.d/net
# This blank configuration will automatically use DHCP for any net.*
# scripts in /etc/init.d.  To create a more complete configuration,
# please review /usr/share/doc/openrc*/net.example* and save your configuration
# in /etc/conf.d/net (this file :]!).

config_eth0="192.168.1.125 netmask 255.255.255.0"
routes_eth0="default via 192.168.1.1"
gentoo-32b ~ #

If it helps, I have the VM NEtwork settings set to Bridged Adapter.

HTH,
Mark

Re: [gentoo-user] static IP issue

[pat]

On Thu, 6 Sep 2012 08:37:33 -0700, Mark Knecht wrote
> On Thu, Sep 6, 2012 at 4:33 AM, pat <pat@xvalheru.org> wrote:
> > Hello,
> >
> > I've installed Gentoo into VirtualBox. I want it to has static IP address and
> > I've followed Hand book instructions and the OpenRC/net.example. After reboot
> > there's a warning: "WARNING: net.lo has already been started" and each network
> > depending service failes to start with: "<service_name>: waiting for net.eth0
> > (51)"; where the 51 is a time which decrements to 0.
> >
> > I've searched net, but without success :-\
> >
> > Can someone help me? The installation is fresh one.
> >
> > Thanks
> >
> >      Pat
> 
> I have a 32-bit Gentoo Virtualbox VM where I am actually sending this
> email from. No problems with having a static IP:
> 
> gentoo-32b ~ # ifconfig -a
> eth0      Link encap:Ethernet  HWaddr 08:00:27:d4:6a:35
>           inet addr:192.168.1.125  Bcast:192.168.1.255  Mask:255.255.255.0
>           inet6 addr: fe80::a00:27ff:fed4:6a35/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:103 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:108 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:10493 (10.2 KiB)  TX bytes:9152 (8.9 KiB)
> 
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           inet6 addr: ::1/128 Scope:Host
>           UP LOOPBACK RUNNING  MTU:16436  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
> 
> sit0      Link encap:IPv6-in-IPv4
>           NOARP  MTU:1480  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
> 
> gentoo-32b ~ # cat /etc/conf.d/net
> net      network
> gentoo-32b ~ # cat /etc/conf.d/net
> # This blank configuration will automatically use DHCP for any net.*
> # scripts in /etc/init.d.  To create a more complete configuration,
> # please review /usr/share/doc/openrc*/net.example* and save your configuration
> # in /etc/conf.d/net (this file :]!).
> 
> config_eth0="192.168.1.125 netmask 255.255.255.0"
> routes_eth0="default via 192.168.1.1"
> gentoo-32b ~ #
> 
> If it helps, I have the VM NEtwork settings set to Bridged Adapter.
> 
> HTH,
> Mark
> 

Hello,

I have bridged network too and my configuration looks similar to yours, but I
have 64-bit Gentoo.

     Pat


----------------------------------------
Freehosting PIPNI - http://www.pipni.cz/