From: YoYo Siska <yoyo@gl.ksp.sk>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Clone live system as a simple backup?
Date: Thu, 8 Mar 2012 13:26:45 +0100 [thread overview]
Message-ID: <20120308122645.GB25729@ksp.sk> (raw)
In-Reply-To: <CAOTuDKqF=6knSn5fPLb7hEyiLM7AaG5PoSuYLLviFwBvxACbyg@mail.gmail.com>
On Wed, Mar 07, 2012 at 02:47:08PM -0500, Joshua Murphy wrote:
> On Wed, Mar 7, 2012 at 8:55 AM, <gandalf@d-danks.co.uk> wrote:
> >> Hi,
> >> I'm interested in the idea of cloning a live, complicated hardware
> >> system onto a single external hard drive as a simple backup. I would
> >> like this external drive to be completely bootable. What's the best
> >> way to approach doing this? I was considering just doing a Gentoo
> >> install from scratch but figured maybe there's a way to clone enough
> >> of the live system to get me there less painfully?
> >>
> >> The system I'm playing with has five 500MB hard drives with most
> >> partitions in linked together in various forms of RAID. (1, 5 & 6)
> >> That said, the total storage that this system presents KDE and the
> >> users is about 600GB.
> >>
> >> I have an external 1TB eSATA drive which is therefore large enough
> >> to hold everything on this system, albeit without the reliability of
> >> RAID which is fine for this purpose.
> >>
> >> The system looks more or less like:
> >>
> >> /dev/sda1 -> /boot (50MB)
> >> /dev/sdb1 -> /boot copy
> >> /dev/sdc1 -> /boot copy
> >>
> >> c2stable ~ # df
> >> Filesystem 1K-blocks Used Available Use% Mounted on
> >> rootfs 51612920 31862844 17128276 66% /
> >> /dev/root 51612920 31862844 17128276 66% /
> >> rc-svcdir 1024 92 932 9% /lib64/rc/init.d
> >> udev 10240 476 9764 5% /dev
> >> shm 6151284 0 6151284 0% /dev/shm
> >> /dev/md7 389183252 350247628 19166232 95% /VirtualMachines
> >> tmpfs 8388608 0 8388608 0% /var/tmp/portage
> >> /dev/sda1 54416 29516 22091 58% /boot
> >> c2stable ~ # cat /proc/mdstat
> >> Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5]
> >> [raid4]
> >> md6 : active raid5 sdb6[1] sdc6[2] sda6[0]
> >> 494833664 blocks super 1.1 level 5, 64k chunk, algorithm 2 [3/3]
> >> [UUU]
> >>
> >> md7 : active raid6 sdb7[1] sdc7[2] sda7[0] sdd2[3] sde2[4]
> >> 395387904 blocks super 1.2 level 6, 16k chunk, algorithm 2 [5/5]
> >> [UUUUU]
> >>
> >> md3 : active raid6 sdb3[1] sdc3[2] sda3[0] sdd3[3] sde3[4]
> >> 157305168 blocks super 1.2 level 6, 16k chunk, algorithm 2 [5/5]
> >> [UUUUU]
> >>
> >> md126 : active raid1 sdc5[2] sda5[0] sdb5[1]
> >> 52436032 blocks [3/3] [UUU]
> >>
> >> unused devices: <none>
> >> c2stable ~ #
> >>
> >> /dev/md3 is a second Gentoo installation that doesn't need to be
> >> backed up at this time. md6 is an internal RAID used to back up md7
> >> daily. It doesn't need to be backed up, but if the machine totally
> >> failed killing all the drives that wouldn't survive so currently I
> >> back up md126 to md6 daily, and then back up md6 weekly to an external
> >> eSATA drive.
> >>
> >> What I'd like to do is clone
> >>
> >> 1) /boot (sda1) including grub and everything required to make it bootable
> >> 2) back up the system portions of dev/md126 (/ )
> >> 3) Add some swap space on the external drive
> >> 4) back up /dev/md7 which is all of my VMs
> >> 5) back up /home to a separate partition on the external drive
> >> 6) back up some special things like /var/lib/portage/world and
> >> /usr/portage/packages
> >>
> >> My thought is that this drive is basically bootable, but over time
> >> gets out-of-sync with the system. However should the system fail I've
> >> got a bootable external drive with all the binary packages required to
> >> get it running again quickly. However I can always boot the drive, do
> >> an emerge -ek @world, and basically be back to where I am as of the
> >> last backup.
> >>
> >> The external drive will look something like:
> >>
> >> /dev/sdg1 -> /boot
> >> /dev/sdg2 -> swap
> >> /dev/sdg3 -> / (not including /home, /usr/portage/distfiles, etc)
> >> /dev/sdg5 -> /usr/portage/packages
> >> /dev/sdg6 -> /dev/md7
> >>
> >> etc....
> >>
> >> I will of course have to modify grub.conf and /etc/fstab to work
> >> from this drive but that's no big deal.
> >>
> >> What are folks best ideas about how to approach doing something like
> >> this?
> >>
> >> Thanks,
> >> Mark
> >>
> >>
> > Hi,
> > Why don't you something like bind mount the folders you want to copy
> > and rsync them to the eSATA disk, after creating a similar partition
> > layout on it. Remember to exclude system files like /proc/*, /dev/*
> > and /sys/* as well as the ones you want to exclude yourself from the
> > rsync. When you want to sync the clone again just do the same again
> > and rsync the changes.
> >
> > Regards,
> > Derek
> >
> >
>
> As an added note on this, rsync's --one-file-system (-x) flag is handy
> for avoiding grabbing unneeded things, but will typically leave you
> without the base few device nodes needed to boot the backup, those can
> either be grabbed from a stage3, or created with (courtesy of Linux
> From Scratch's section "6.2.1. Creating Initial Device Nodes"):
>
> mknod -m 600 ${backup}/dev/console c 5 1
> mknod -m 666 ${backup}/dev/null c 1 3
The best way to copy a filesystem without any sub-mounts is to
mount-bind it to some directory and copy it from there:
mkdir /tmp/root
mount --bind / /tmp/root
rsync -a /tmp/root/ /mnt/backup/
Note that copying a rw filesystem (especially /) on a running system
isn't a very clean operation..
yoyo
next prev parent reply other threads:[~2012-03-08 12:27 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-06 19:51 [gentoo-user] Clone live system as a simple backup? Mark Knecht
2012-03-07 13:55 ` gandalf
2012-03-07 19:47 ` Joshua Murphy
2012-03-08 12:26 ` YoYo Siska [this message]
2012-03-08 16:52 ` Pandu Poluan
2012-03-08 17:12 ` Neil Bothwick
2012-03-08 19:14 ` Mark Knecht
2012-03-08 19:53 ` Brian Wiborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120308122645.GB25729@ksp.sk \
--to=yoyo@gl.ksp.sk \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox