[gentoo-user] Which sound codecs do I need?

[gentoo-user] Which sound codecs do I need?

[Walter Dnes]

  I'm installing Gentoo on an older Intel Core2 Duo machine from Dell
for some testing.  Checking with "lspci -v" from the install CD shows...

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
     Subsystem: Dell Inspiron 530
     Flags: bus master, fast devsel, latency 0, IRQ 43
     Memory at fdff4000 (64-bit, non-prefetchable) [size=16K]
     Capabilities: [50] Power Management version 2
     Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
     Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
     Capabilities: [100] Virtual Channel
     Capabilities: [130] Root Complex Link
     Kernel driver in use: HDA Intel
     Kernel modules: snd-hda-intel

  In "make menuconfig" I get a whole slew of codecs, i.e...

CONFIG_SND_HDA_CODEC_REALTEK
CONFIG_SND_HDA_CODEC_ANALOG
CONFIG_SND_HDA_CODEC_SIGMATEL
CONFIG_SND_HDA_CODEC_VIA
CONFIG_SND_HDA_CODEC_HDMI
CONFIG_SND_HDA_CODEC_CIRRUS
CONFIG_SND_HDA_CODEC_CONEXANT
CONFIG_SND_HDA_CODEC_CA0110
CONFIG_SND_HDA_CODEC_CMEDIA
CONFIG_SND_HDA_CODEC_SI3054

  The only one I'm confident eliminating is CONFIG_SND_HDA_CODEC_HDMI
due to the help saying "Say Y here to include HDMI and DisplayPort
HD-audio codec".  This is an older machine, and doesn't have a card or
chip with HDMI and/or DisplayPort.

-- 
Walter Dnes <waltdnes@waltdnes.org>

[gentoo-user] Re: Which sound codecs do I need?

[Nikos Chantziaras]

On 10/13/2011 02:35 AM, Walter Dnes wrote:
> I'm installing Gentoo on an older Intel Core2 Duo machine from Dell
> for some testing.  Checking with "lspci -v" from the install CD shows...
>
> 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
>       Subsystem: Dell Inspiron 530

Well, since you're too busy to use Google, let me do that for you ;-)

http://support.dell.com/support/edocs/systems/inspd530/en/OM/HTML/appendix.htm

The sound chip is a Realtek ALC888.  I'm sure this is all the info 
needed to select the correct driver.

Re: [gentoo-user] Re: Which sound codecs do I need?

[Dale]

Nikos Chantziaras wrote:
> On 10/13/2011 02:35 AM, Walter Dnes wrote:
>> I'm installing Gentoo on an older Intel Core2 Duo machine from Dell
>> for some testing.  Checking with "lspci -v" from the install CD shows...
>>
>> 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio 
>> Controller (rev 02)
>>       Subsystem: Dell Inspiron 530
>
> Well, since you're too busy to use Google, let me do that for you ;-)
>
> http://support.dell.com/support/edocs/systems/inspd530/en/OM/HTML/appendix.htm 
>
>
> The sound chip is a Realtek ALC888.  I'm sure this is all the info 
> needed to select the correct driver.
>
>
>

Or lspci -k would tell what driver the CD was using, if sound worked 
which I bet it did.

Dale

:-)  :-)

Re: [gentoo-user] Re: Which sound codecs do I need?

[Walter Dnes]

On Wed, Oct 12, 2011 at 10:52:54PM -0500, Dale wrote

> Or lspci -k would tell what driver the CD was using, if sound worked 
> which I bet it did.

  That tells me which *DRIVER* is in use (so does "lspci -v" for that
matter).  It does *NOT* tell me the *AUDIO CODEC*.  "lspci -k" shows...

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
        Subsystem: Dell Device 020d
        Kernel driver in use: HDA Intel

-- 
Walter Dnes <waltdnes@waltdnes.org>

Re: [gentoo-user] Re: Which sound codecs do I need?

[Michael Mol]

On Mon, Oct 17, 2011 at 5:08 PM, Walter Dnes <waltdnes@waltdnes.org> wrote:
> On Wed, Oct 12, 2011 at 10:52:54PM -0500, Dale wrote
>
>> Or lspci -k would tell what driver the CD was using, if sound worked
>> which I bet it did.
>
>  That tells me which *DRIVER* is in use (so does "lspci -v" for that
> matter).  It does *NOT* tell me the *AUDIO CODEC*.  "lspci -k" shows...
>
> 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
>        Subsystem: Dell Device 020d
>        Kernel driver in use: HDA Intel

Yeah, the intel_hda system is pretty funky. My understanding is that
the API is essentially a programmable plugboard connecting the various
DSPs on the chip, and that the "codec" is a mapping of which pins
connect to which.

Kinda neat, actually. You'd think someone clever would try expressing
that interface more intuitively to the user.

-- 
:wq

Re: [gentoo-user] Re: Which sound codecs do I need?

[Walter Dnes]

On Thu, Oct 13, 2011 at 04:58:24AM +0300, Nikos Chantziaras wrote
> On 10/13/2011 02:35 AM, Walter Dnes wrote:
> > I'm installing Gentoo on an older Intel Core2 Duo machine from Dell
> > for some testing.  Checking with "lspci -v" from the install CD shows...
> >
> > 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
> >       Subsystem: Dell Inspiron 530
> 
> Well, since you're too busy to use Google, let me do that for you ;-)
> 
> http://support.dell.com/support/edocs/systems/inspd530/en/OM/HTML/appendix.htm
> 
> The sound chip is a Realtek ALC888.  I'm sure this is all the info 
> needed to select the correct driver.

  Your Google-fu is stronger than mine.  I did try Google, but it didn't
occur to me to use that specific search.  Anyhow, thanks for the info.

-- 
Walter Dnes <waltdnes@waltdnes.org>

Re: [gentoo-user] Re: Which sound codecs do I need?

[Andrey Moshbear]

On Mon, Oct 17, 2011 at 16:58, Walter Dnes <waltdnes@waltdnes.org> wrote:
> On Thu, Oct 13, 2011 at 04:58:24AM +0300, Nikos Chantziaras wrote
>> On 10/13/2011 02:35 AM, Walter Dnes wrote:
>> > I'm installing Gentoo on an older Intel Core2 Duo machine from Dell
>> > for some testing.  Checking with "lspci -v" from the install CD shows...
>> >
>> > 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
>> >       Subsystem: Dell Inspiron 530
>>
>> Well, since you're too busy to use Google, let me do that for you ;-)
>>
>> http://support.dell.com/support/edocs/systems/inspd530/en/OM/HTML/appendix.htm
>>
>> The sound chip is a Realtek ALC888.  I'm sure this is all the info
>> needed to select the correct driver.
>
>  Your Google-fu is stronger than mine.  I did try Google, but it didn't
> occur to me to use that specific search.  Anyhow, thanks for the info.

snd_hda_codec_realtek on kernel >=2.6.31