this is spam (was: Re: [gentoo-user] 回复： [gentoo-user] Anyone can afford information about build kernel?)

[Jonas de Buhr <jonas.de.buhr@gmx.net>]

Am Tue, 11 Oct 2011 13:03:27 +0200
schrieb Jonas de Buhr <jonas.de.buhr@gmx.net>:

> it's nice how much many people on this this list are willing to help
> in spite of all this. but am i really the only one who finds the
> behavior described above at least confusing?
> anyway, i'm quite convinced it is fake.

no, apparently i am not the only one thinking that:
http://www.stopforumspam.com/ipcheck/58.243.95.123

> 
> /jonas
> 
> Am Sun, 9 Oct 2011 21:44:28 +0800
> schrieb "Lavender" <448463782@qq.com>:
> 
> > Thank you all ! Thanks for helping , now I know which things I
> > should do . 
> >   
> >   ------------------ 原始邮件 ------------------
> >   发件人: "Michael Mol"<mikemol@gmail.com>;
> >  发送时间: 2011年10月9日(星期天) 晚上9:40
> >  收件人: "gentoo-user"<gentoo-user@lists.gentoo.org>; 
> >  
> >  主题: Re: [gentoo-user] Anyone can afford information about build
> > kernel?
> > 
> >   
> > On Sun, Oct 9, 2011 at 9:30 AM, Michael Mol <mikemol@gmail.com>
> > wrote:
> > > On Sun, Oct 9, 2011 at 12:53 AM, Lavender <448463782@qq.com>
> > > wrote:
> > >> Yeah, your reply is exact what I mean , but I'm really confused
> > >> by those modules' names, I can't find any contact between the
> > >> hard device name and its module name . For example,  there is a
> > >> module named 3c59x.ko , I totally don't know what device it
> > >> present for ,
> > >
> > > This got a *lot* easier back when sysfs was added.
> > >
> > > cd /sys/module/<modulename>/drivers/
> > >
> > > And go from there
> > >
> > > lspci will help you see the 'text' name for the device in
> > > question.
> > >
> > > For example, let's say I don't know what the 'ahci' module is for.
> > >
> > > $ cd /sys/module/ahci/drivers
> > > $ ls
> > > pci:ahci
> > > $ cd pci\:ahci/
> > > $ ls
> > > 0000:00:11.0  bind  module  new_id  remove_id  uevent  unbind
> > > $ sudo lspci|grep 11.0
> > > 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA
> > > Controller [AHCI mode]
> > > $
> > >
> > > So now I know the ahci module manages my SATA controller.
> > 
> > Came up with something possibly a little handier. This command
> > should tell you what driver is associated with every device on the
> > system.
> > 
> > find /sys/devices -name driver -print0|xargs -0 ls -l|cut -d' '
> > -f10-|sed -e 's/\.\.\///g'
> > 
> > Output could probably still be a bit better cleaned up, but it
> > should help.
> >