* [gentoo-user] rc runlevel act strangely
@ 2011-06-19 11:56 刘勇泰
2011-06-19 12:27 ` Peter Humphrey
0 siblings, 1 reply; 14+ messages in thread
From: 刘勇泰 @ 2011-06-19 11:56 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 609 bytes --]
Hello everyone. I just buildup a new amd64 gentoo box using latest
stage3 tar ball. After installed Gnome things, I used "eselect rc add"
command to add some init scripts into default runlevel. The content of
/etc/runlevels/default directory is:
acpid dbus NetworkManager udev-postmount alsasound local syslog-ng
vixie-cron consolekit netmount system-tools-backends xdm
But after reboot, only syslog-ng vixie-cron net-mount and local started
and the others had just been ignored, and I can successfully run the
other init scripts manually after log in as root. Any advise about where
I could check?
[-- Attachment #2: Type: text/html, Size: 930 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [gentoo-user] rc runlevel act strangely
2011-06-19 11:56 [gentoo-user] rc runlevel act strangely 刘勇泰
@ 2011-06-19 12:27 ` Peter Humphrey
2011-06-19 12:40 ` Dale
0 siblings, 1 reply; 14+ messages in thread
From: Peter Humphrey @ 2011-06-19 12:27 UTC (permalink / raw
To: gentoo-user
On Sunday 19 June 2011 12:56:13 刘勇泰 wrote:
> After installed Gnome things, I used "eselect rc add" command to add some
> init scripts into default runlevel.
The command you should have used is "rc-update add <service> default".
--
Rgds
Peter
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user] rc runlevel act strangely
2011-06-19 12:27 ` Peter Humphrey
@ 2011-06-19 12:40 ` Dale
2011-06-19 15:16 ` Peter Humphrey
0 siblings, 1 reply; 14+ messages in thread
From: Dale @ 2011-06-19 12:40 UTC (permalink / raw
To: gentoo-user
Peter Humphrey wrote:
> On Sunday 19 June 2011 12:56:13 刘勇泰 wrote:
>
>
>> After installed Gnome things, I used "eselect rc add" command to add some
>> init scripts into default runlevel.
>>
> The command you should have used is "rc-update add<service> default".
>
>
Actually, eselect is the new way. I still use the old way myself but
eselect should work just as well.
I suspect that something failed to start and the other services depend
on what failed so it didn't start them. Just a theory.
Dale
:-) :-)
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user] rc runlevel act strangely
2011-06-19 12:40 ` Dale
@ 2011-06-19 15:16 ` Peter Humphrey
2011-06-19 15:38 ` Dale
0 siblings, 1 reply; 14+ messages in thread
From: Peter Humphrey @ 2011-06-19 15:16 UTC (permalink / raw
To: gentoo-user
On Sunday 19 June 2011 13:40:47 Dale wrote:
> Peter Humphrey wrote:
> > The command you should have used is "rc-update add<service> default".
>
> Actually, eselect is the new way. I still use the old way myself but
> eselect should work just as well.
How so? I've never come across this idea til today.
--
Rgds
Peter
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user] rc runlevel act strangely
2011-06-19 15:16 ` Peter Humphrey
@ 2011-06-19 15:38 ` Dale
2011-06-19 21:36 ` Peter Humphrey
0 siblings, 1 reply; 14+ messages in thread
From: Dale @ 2011-06-19 15:38 UTC (permalink / raw
To: gentoo-user
Peter Humphrey wrote:
> On Sunday 19 June 2011 13:40:47 Dale wrote:
>
>> Peter Humphrey wrote:
>>
>>> The command you should have used is "rc-update add<service> default".
>>>
>> Actually, eselect is the new way. I still use the old way myself but
>> eselect should work just as well.
>>
> How so? I've never come across this idea til today.
>
>
I don't know when it got added but it is on mine. This is in the help page:
rc Manage /etc/init.d scripts in runlevels
It works something like this:
root@fireball / # eselect rc add xdm default
Adding xdm to following runlevels
default [skipped]
root@fireball / #
It was skipped because it was already there but that's how it works.
Neat huh?
Dale
:-) :-)
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user] rc runlevel act strangely
2011-06-19 15:38 ` Dale
@ 2011-06-19 21:36 ` Peter Humphrey
2011-06-19 21:47 ` William Hubbs
0 siblings, 1 reply; 14+ messages in thread
From: Peter Humphrey @ 2011-06-19 21:36 UTC (permalink / raw
To: gentoo-user
On Sunday 19 June 2011 16:38:35 Dale wrote:
> I don't know when it got added but it is on mine. This is in the help
> page:
>
> rc Manage /etc/init.d scripts in runlevels
>
> It works something like this:
>
> root@fireball / # eselect rc add xdm default
> Adding xdm to following runlevels
> default [skipped]
> root@fireball / #
>
> It was skipped because it was already there but that's how it works.
>
> Neat huh?
The old method did much the same, but with openrc and baselayout-2 we lost
the alphabetical ordering of the entries.
Now, if I tell it $ eselect rc list
I get:
Available init scripts
acpid default
alsasound default
apache2 default
atom
bootmisc boot
chronyd default
consolefont boot
consolekit
cpufrequtils default
crypto-loop
cupsd default
dbus default
devfs sysinit
device-mapper boot
dmesg sysinit
dmeventd
dnsmasq default
fancontrol
fsck boot
fuse
git-daemon
gkrellmd
gpm no-x
hdparm
hostname boot
hwclock boot
keymaps boot
killprocs shutdown
lm_sensors default
local default
localmount boot
lvm boot
lvm-monitoring
mdadm
mdev
mdraid
modules boot
mount-ro shutdown
mtab boot
mysql default
mysqlmanager
net.eth0 default
net.lo boot
netmount default
network
nfs
nfsmount default
nscd
numlock boot
pciparm
portagexsd
procfs boot
pwcheck
pydoc-2.7
pydoc-3.1
root boot
rpc.idmapd
rpc.pipefs
rpc.statd
rpcbind
rsyncd
saslauthd
savecache shutdown
smartd default
spamd
sshd default
staticroute
swap boot
swclock
sysctl boot
sysfs
syslog-ng default
termencoding boot
twistd
udev sysinit
udev-dev-tarball
udev-mount
udev-postmount default
urandom boot
vixie-cron default
xdm default
xdm-setup
It's incomplete - what about all the services that are in more than one run-
level? It only lists the first run-level a service is in, for some value of
"first".
This is the old way:
$ sudo rc-update -s -v
local | default
apache2 | default no-x
mtab | boot
saslauthd |
net.eth0 | default no-x
procfs | boot
urandom | boot
rpc.pipefs |
mdev |
cupsd | default no-x
bootmisc | boot
nfs |
chronyd | default no-x
fsck | boot
sshd | default no-x
vboxweb-service | default
killprocs | shutdown
lm_sensors | default
xdm-setup |
nscd |
hdparm |
nfsmount | default no-x
swap | boot
vixie-cron | nonetwork default no-x
git-daemon |
crypto-loop |
xdm | default
pydoc-3.1 |
dmeventd |
net.lo | boot
mysql | default no-x
udev-dev-tarball |
savecache | shutdown
lvm | boot
consolekit |
rpcbind |
fuse |
dnsmasq | default no-x
device-mapper | boot
acpid | default no-x
termencoding | boot
rpc.idmapd |
localmount | boot
staticroute |
root | boot
dmesg | sysinit
hwclock | boot
network |
vboxdrv | default
pciparm |
atom |
udev-mount |
pwcheck |
lvm-monitoring |
mysqlmanager |
consolefont | boot
fancontrol |
rpc.statd |
alsasound | default
twistd |
netmount | default no-x
gpm | nonetwork no-x
vboxballoonctrl-service | default
devfs | sysinit
swclock |
dbus | default
numlock | boot
rsyncd |
sysfs |
sysctl | boot
syslog-ng | nonetwork default no-x
cpufrequtils | default no-x
spamd |
keymaps | boot
mdraid |
pydoc-2.7 |
portagexsd |
udev | sysinit
gkrellmd |
udev-postmount | default no-x
mdadm |
hostname | boot
mount-ro | shutdown
modules | boot
smartd | nonetwork default no-x
Far more information, but so much harder to find it. Methinks development is
not yet finished.
--
Rgds
Peter
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [gentoo-user] rc runlevel act strangely
2011-06-19 21:36 ` Peter Humphrey
@ 2011-06-19 21:47 ` William Hubbs
2011-06-20 1:33 ` Dale
0 siblings, 1 reply; 14+ messages in thread
From: William Hubbs @ 2011-06-19 21:47 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 735 bytes --]
On Sun, Jun 19, 2011 at 10:36:47PM +0100, Peter Humphrey wrote:
> On Sunday 19 June 2011 16:38:35 Dale wrote:
>
> > I don't know when it got added but it is on mine. This is in the help
> > page:
> >
> > rc Manage /etc/init.d scripts in runlevels
> >
> > It works something like this:
> >
> > root@fireball / # eselect rc add xdm default
> > Adding xdm to following runlevels
> > default [skipped]
> > root@fireball / #
> >
> > It was skipped because it was already there but that's how it works.
> >
> > Neat huh?
The official way to add or delete services is to use rc-update. I do not
know anything about using eselect rc to do this.
Thanks,
William
[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user] rc runlevel act strangely
2011-06-19 21:47 ` William Hubbs
@ 2011-06-20 1:33 ` Dale
2011-06-20 16:51 ` Per-Erik Westerberg
0 siblings, 1 reply; 14+ messages in thread
From: Dale @ 2011-06-20 1:33 UTC (permalink / raw
To: gentoo-user
William Hubbs wrote:
> On Sun, Jun 19, 2011 at 10:36:47PM +0100, Peter Humphrey wrote:
>
>> On Sunday 19 June 2011 16:38:35 Dale wrote:
>>
>>
>>> I don't know when it got added but it is on mine. This is in the help
>>> page:
>>>
>>> rc Manage /etc/init.d scripts in runlevels
>>>
>>> It works something like this:
>>>
>>> root@fireball / # eselect rc add xdm default
>>> Adding xdm to following runlevels
>>> default [skipped]
>>> root@fireball / #
>>>
>>> It was skipped because it was already there but that's how it works.
>>>
>>> Neat huh?
>>>
> The official way to add or delete services is to use rc-update. I do not
> know anything about using eselect rc to do this.
>
> Thanks,
>
> William
>
Is this documented somewhere? Using eselect for this I mean. Surely
the OP saw it in a doc somewhere. Sort of doubtful that he/she pulled
this out of their hat on their own.
Dale
:-) :-)
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user] rc runlevel act strangely
2011-06-20 1:33 ` Dale
@ 2011-06-20 16:51 ` Per-Erik Westerberg
2011-06-20 17:24 ` Dale
0 siblings, 1 reply; 14+ messages in thread
From: Per-Erik Westerberg @ 2011-06-20 16:51 UTC (permalink / raw
To: gentoo-user
sön 2011-06-19 klockan 20:33 -0500 skrev Dale:
> William Hubbs wrote:
> > On Sun, Jun 19, 2011 at 10:36:47PM +0100, Peter Humphrey wrote:
> >
> >> On Sunday 19 June 2011 16:38:35 Dale wrote:
> >>
> >>
> >>> I don't know when it got added but it is on mine. This is in the help
> >>> page:
> >>>
> >>> rc Manage /etc/init.d scripts in runlevels
> >>>
> >>> It works something like this:
> >>>
> >>> root@fireball / # eselect rc add xdm default
> >>> Adding xdm to following runlevels
> >>> default [skipped]
> >>> root@fireball / #
> >>>
> >>> It was skipped because it was already there but that's how it works.
> >>>
> >>> Neat huh?
> >>>
> > The official way to add or delete services is to use rc-update. I do not
> > know anything about using eselect rc to do this.
> >
> > Thanks,
> >
> > William
> >
>
> Is this documented somewhere? Using eselect for this I mean. Surely
> the OP saw it in a doc somewhere. Sort of doubtful that he/she pulled
> this out of their hat on their own.
>
> Dale
>
> :-) :-)
>
Well, issuing "eselect" lists "rc" as a module and "man rc.eselect"
gives you a list of actions to use and their description :
NAME
rc.eselect - Runlevel configuration module
SYNOPSIS
eselect rc [help|usage|version]
eselect rc add script [runlevel...]
eselect rc delete script [runlevel...]
eselect rc list [runlevel]
eselect rc pause script [script...]
eselect rc restart script [script...]
eselect rc show [runlevel...]
eselect rc start script [script...]
eselect rc stop script [script...]
;) / Per-Erik
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [gentoo-user] rc runlevel act strangely
2011-06-20 16:51 ` Per-Erik Westerberg
@ 2011-06-20 17:24 ` Dale
2011-06-20 22:55 ` Neil Bothwick
0 siblings, 1 reply; 14+ messages in thread
From: Dale @ 2011-06-20 17:24 UTC (permalink / raw
To: gentoo-user
Per-Erik Westerberg wrote:
>
> Well, issuing "eselect" lists "rc" as a module and "man rc.eselect"
> gives you a list of actions to use and their description :
>
> NAME
> rc.eselect - Runlevel configuration module
>
> SYNOPSIS
> eselect rc [help|usage|version]
> eselect rc add script [runlevel...]
> eselect rc delete script [runlevel...]
> eselect rc list [runlevel]
> eselect rc pause script [script...]
> eselect rc restart script [script...]
> eselect rc show [runlevel...]
> eselect rc start script [script...]
> eselect rc stop script [script...]
>
> ;) / Per-Erik
>
>
I looked on Gentoo.org but I couldn't find it documented there. I found
eselect itself but nothing on the rc part. I was curious as to where
the OP found it or if we have a user who actually read a man page
first. O_O Imagine that. lol
I'm glad you posted the rc.eselect man page tho. I didn't know about
that. Now I can go dig out the others and read up on them too.
Where did our OP go anyway?
Dale
:-) :-)
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user] rc runlevel act strangely
2011-06-20 17:24 ` Dale
@ 2011-06-20 22:55 ` Neil Bothwick
2011-06-20 23:09 ` Dale
0 siblings, 1 reply; 14+ messages in thread
From: Neil Bothwick @ 2011-06-20 22:55 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 619 bytes --]
On Mon, 20 Jun 2011 12:24:26 -0500, Dale wrote:
> I looked on Gentoo.org but I couldn't find it documented there. I
> found eselect itself but nothing on the rc part. I was curious as to
> where the OP found it or if we have a user who actually read a man page
> first. O_O Imagine that. lol
It was only a few days ago that eselect was discussed, with those with
poor memories saying that they had to run it with no options to get a
list of modules. It appears that someone looked at that list.
--
Neil Bothwick
If bankers can count, how come they have eight windows and only four
tellers?
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user] rc runlevel act strangely
2011-06-20 22:55 ` Neil Bothwick
@ 2011-06-20 23:09 ` Dale
2011-06-21 7:46 ` Thanasis
[not found] ` <201106211602.24021.peter@humphrey.ukfsn.org>
0 siblings, 2 replies; 14+ messages in thread
From: Dale @ 2011-06-20 23:09 UTC (permalink / raw
To: gentoo-user
Neil Bothwick wrote:
> On Mon, 20 Jun 2011 12:24:26 -0500, Dale wrote:
>
>
>> I looked on Gentoo.org but I couldn't find it documented there. I
>> found eselect itself but nothing on the rc part. I was curious as to
>> where the OP found it or if we have a user who actually read a man page
>> first. O_O Imagine that. lol
>>
> It was only a few days ago that eselect was discussed, with those with
> poor memories saying that they had to run it with no options to get a
> list of modules. It appears that someone looked at that list.
>
>
I just wonder if it is ready for "primetime" since it is not
documented? Since the OP had trouble with it, maybe we should be doing
it the old way because it still has a bug somewhere.
Then again, maybe the docs team is running a bit behind? Maybe it is
stable and should work.
This may be pointless since the OP seems to have disappeared. lol
Dale
:-) :-)
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2011-06-21 16:07 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-06-19 11:56 [gentoo-user] rc runlevel act strangely 刘勇泰
2011-06-19 12:27 ` Peter Humphrey
2011-06-19 12:40 ` Dale
2011-06-19 15:16 ` Peter Humphrey
2011-06-19 15:38 ` Dale
2011-06-19 21:36 ` Peter Humphrey
2011-06-19 21:47 ` William Hubbs
2011-06-20 1:33 ` Dale
2011-06-20 16:51 ` Per-Erik Westerberg
2011-06-20 17:24 ` Dale
2011-06-20 22:55 ` Neil Bothwick
2011-06-20 23:09 ` Dale
2011-06-21 7:46 ` Thanasis
[not found] ` <201106211602.24021.peter@humphrey.ukfsn.org>
2011-06-21 15:14 ` Dale
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox