[gentoo-user] Framebuffer

[gentoo-user] Framebuffer

[JDM]

Genthinktank,
How can you determine all the available frambuffer resolutions and colour depths on a particular host for vesafb. I normally set this through trial and error but there must be a command to determine these?
JDM

Re: [gentoo-user] Framebuffer

[Indi]

On Wed, May 18, 2011 at 03:10:02PM +0200, JDM wrote:
> Genthinktank,
> How can you determine all the available frambuffer resolutions and colour depths on a particular host for vesafb. I normally set this through trial and error but there must be a command to determine these?
> JDM

I think "fbset" will do, check the man page.

-- 
caveat utilitor 
♫ ❤ ♫ ❤ ♫ ❤ ♫ 

Re: [gentoo-user] Framebuffer

[dong l]

That's called vbe information.If you have grub2,you can enter the
command mode and type 'vbeinfo',or if you use uvesafb,you will get vbe
info here at /sys/devices/platform/uvesafb.0/graphics/fb0/modes

2011/5/18 Indi <thebeelzebubtrigger@gmail.com>:
> On Wed, May 18, 2011 at 03:10:02PM +0200, JDM wrote:
>> Genthinktank,
>> How can you determine all the available frambuffer resolutions and colour depths on a particular host for vesafb. I normally set this through trial and error but there must be a command to determine these?
>> JDM
>
> I think "fbset" will do, check the man page.
>
> --
> caveat utilitor
> ♫ ❤ ♫ ❤ ♫ ❤ ♫
>
>
>

Re: [gentoo-user] Framebuffer

[Mark Knecht]

On Wed, May 18, 2011 at 5:57 AM, JDM <jdm@arcticwolf.myzen.co.uk> wrote:
> Genthinktank,
> How can you determine all the available frambuffer resolutions and colour depths on a particular host for vesafb. I normally set this through trial and error but there must be a command to determine these?
> JDM
>
>

HTH,
Mark

c2stable ~ # hwinfo --framebuffer
02: None 00.0: 11001 VESA Framebuffer
  [Created at bios.459]
  Unique ID: rdCR.u0Yr_tr7pZ7
  Hardware Class: framebuffer
  Model: "NVIDIA GF100 Board - 10250008"
  Vendor: "NVIDIA Corporation"
  Device: "GF100 Board - 10250008"
  SubVendor: "NVIDIA"
  SubDevice:
  Revision: "Chip Rev"
  Memory Size: 14 MB
  Memory Range: 0xd5000000-0xd5dfffff (rw)
  Mode 0x0300: 640x400 (+640), 8 bits
  Mode 0x0301: 640x480 (+640), 8 bits
  Mode 0x0303: 800x600 (+800), 8 bits
  Mode 0x030e: 320x200 (+640), 16 bits
  Mode 0x030f: 320x200 (+1280), 24 bits
  Mode 0x0311: 640x480 (+1280), 16 bits
  Mode 0x0312: 640x480 (+2560), 24 bits
  Mode 0x0314: 800x600 (+1600), 16 bits
  Mode 0x0315: 800x600 (+3200), 24 bits
  Mode 0x0330: 320x200 (+320), 8 bits
  Mode 0x0331: 320x400 (+320), 8 bits
  Mode 0x0332: 320x400 (+640), 16 bits
  Mode 0x0333: 320x400 (+1280), 24 bits
  Mode 0x0334: 320x240 (+320), 8 bits
  Mode 0x0335: 320x240 (+640), 16 bits
  Mode 0x0336: 320x240 (+1280), 24 bits
  Mode 0x033d: 640x400 (+1280), 16 bits
  Mode 0x033e: 640x400 (+2560), 24 bits
  Config Status: cfg=new, avail=yes, need=no, active=unknown
c2stable ~ #