[gentoo-user] OpenRC: Need to start net.eth1 and ntp-client by hand

[gentoo-user] OpenRC: Need to start net.eth1 and ntp-client by hand

[meino.cramer]

Hi,

after upgradeing to openrc there still some issues...

1) After reboot eth1 (there was/is no eth0!) is up and
   running (according to ifconfig) but 
        
        ping <site>

   returns "unknown host". After calling /etc/init.d/net.eth1
   (which is a symlink to /etc/net.lo) as root by hand again
   the ping comand works

   How can I make this working at boot time?

2) /etc/ntp-client gets not called at boot time. Calling
   it by hand as root afterwards reveals no errors and 
   all works find.

   How can I make this working at boot time,too?

Thank you for your help in advance!

Best regards,
mcc

Re: [gentoo-user] OpenRC: Need to start net.eth1 and ntp-client by hand

[covici]

meino.cramer@gmx.de wrote:

> Hi,
> 
> after upgradeing to openrc there still some issues...
> 
> 1) After reboot eth1 (there was/is no eth0!) is up and
>    running (according to ifconfig) but 
>         
>         ping <site>
> 
>    returns "unknown host". After calling /etc/init.d/net.eth1
>    (which is a symlink to /etc/net.lo) as root by hand again
>    the ping comand works
> 
>    How can I make this working at boot time?
> 
> 2) /etc/ntp-client gets not called at boot time. Calling
>    it by hand as root afterwards reveals no errors and 
>    all works find.
> 
>    How can I make this working at boot time,too?
> 
> Thank you for your help in advance!

I will ask the obvious -- do you have those two in either boot or
default run level?

-- 
Your life is like a penny.  You're going to lose it.  The question is:
How do
you spend it?

         John Covici
         covici@ccs.covici.com

Re: [gentoo-user] OpenRC: Need to start net.eth1 and ntp-client by hand

[Thanasis]

on 05/12/2011 06:13 AM meino.cramer@gmx.de wrote the following:
> Hi,
> 
> after upgradeing to openrc there still some issues...
> 
> 1) After reboot eth1 (there was/is no eth0!) is up and
>    running (according to ifconfig) but 
>         
>         ping <site>
> 
>    returns "unknown host". After calling /etc/init.d/net.eth1
>    (which is a symlink to /etc/net.lo) as root by hand again
>    the ping comand works
> 
>    How can I make this working at boot time?

rc-update add net.eth0 default


> 
> 2) /etc/ntp-client gets not called at boot time. Calling
>    it by hand as root afterwards reveals no errors and 
>    all works find.
> 
>    How can I make this working at boot time,too?
> 

add to runlevel as above...

rc-update add <servicename> <runlevel>

Re: [gentoo-user] OpenRC: Need to start net.eth1 and ntp-client by hand

[Mick]

2011/5/12 Thanasis <thanasis@asyr.hopto.org>:
> on 05/12/2011 06:13 AM meino.cramer@gmx.de wrote the following:
>> Hi,
>>
>> after upgradeing to openrc there still some issues...
>>
>> 1) After reboot eth1 (there was/is no eth0!) is up and
>>    running (according to ifconfig) but
>>
>>         ping <site>
>>
>>    returns "unknown host". After calling /etc/init.d/net.eth1
>>    (which is a symlink to /etc/net.lo) as root by hand again
>>    the ping comand works
>>
>>    How can I make this working at boot time?
>
> rc-update add net.eth0 default

This will only work if the OP first reads the migration web page[1]
that the devs have kindly provided and included in the elog of KDE
4.6, which explicitly states that the  net.eth0 -> net.lo symlink may
need to be recreated.

[1]  http://www.gentoo.org/proj/en/desktop/kde/kde44-46-upgrade.xml
-- 
Regards,
Mick

Re: [gentoo-user] OpenRC: Need to start net.eth1 and ntp-client by hand

[Mick]

On 12 May 2011 09:27, Mick <michaelkintzios@gmail.com> wrote:
> 2011/5/12 Thanasis <thanasis@asyr.hopto.org>:
>> on 05/12/2011 06:13 AM meino.cramer@gmx.de wrote the following:
>>> Hi,
>>>
>>> after upgradeing to openrc there still some issues...
>>>
>>> 1) After reboot eth1 (there was/is no eth0!) is up and
>>>    running (according to ifconfig) but
>>>
>>>         ping <site>
>>>
>>>    returns "unknown host". After calling /etc/init.d/net.eth1
>>>    (which is a symlink to /etc/net.lo) as root by hand again
>>>    the ping comand works
>>>
>>>    How can I make this working at boot time?
>>
>> rc-update add net.eth0 default
>
> This will only work if the OP first reads the migration web page[1]
> that the devs have kindly provided and included in the elog of KDE
> 4.6, which explicitly states that the  net.eth0 -> net.lo symlink may
> need to be recreated.
>
> [1]  http://www.gentoo.org/proj/en/desktop/kde/kde44-46-upgrade.xml

Oops!  My bad, I'm getting confused with all these upgrades!  :))

The guide to read is of course the OpenRC migration:

http://www.gentoo.org/doc/en/openrc-migration.xml

-- 
Regards,
Mick

Re: [gentoo-user] OpenRC: Need to start net.eth1 and ntp-client by hand

[Dale]

Mick wrote:
> On 12 May 2011 09:27, Mick<michaelkintzios@gmail.com>  wrote:
>    
>>
>> This will only work if the OP first reads the migration web page[1]
>> that the devs have kindly provided and included in the elog of KDE
>> 4.6, which explicitly states that the  net.eth0 ->  net.lo symlink may
>> need to be recreated.
>>
>> [1]  http://www.gentoo.org/proj/en/desktop/kde/kde44-46-upgrade.xml
>>      
> Oops!  My bad, I'm getting confused with all these upgrades!  :))
>
> The guide to read is of course the OpenRC migration:
>
> http://www.gentoo.org/doc/en/openrc-migration.xml
>
>    

Yep.  I had to recreate my link to eth0 as well.  Glad I noticed that 
before I rebooted.  Then again, I did cheat a little.  I copied the 
upgrade guide as plain text and put it in my root directory.  If 
something did go oopsy, I could open the file with nano and see where I 
went wrong.  Neat huh?

OP.  You really need to go through that guide step by step.  Things 
should work fine if you do.  At least all the big stuff anyway.

Dale

:-)  :-)