[gentoo-user] ASUS Crosshair IV Formula + AMD Phenom II X6 1090T: Fan speead readout ???

[gentoo-user] ASUS Crosshair IV Formula + AMD Phenom II X6 1090T: Fan speead readout ???

[meino.cramer]

Hi,

with the setup mentioned in the subject to this posting
I have mananged to get this readout with the command 'sensors':

    k10temp-pci-00c3
    Adapter: PCI adapter
    temp1:       +18.5 C  (high = +70.0 C, crit = +90.0 C)
    
    atk0110-acpi-0
    Adapter: ACPI interface
    Vcore Voltage:         +1.28 V  (min =  +0.80 V, max =  +1.60 V)
    CPU/NB Voltage:        +1.16 V  (min =  +0.80 V, max =  +1.60 V)
    CPU VDDA Voltage:      +2.50 V  (min =  +2.00 V, max =  +3.00 V)
    DRAM Voltage:          +1.50 V  (min =  +1.40 V, max =  +1.90 V)
    HT Voltage:            +1.20 V  (min =  +0.80 V, max =  +1.50 V)
    NB Voltage:            +1.10 V  (min =  +0.90 V, max =  +1.35 V)
    SB Voltage:            +1.11 V  (min =  +0.80 V, max =  +1.50 V)
    +3.3V Voltage:         +3.34 V  (min =  +2.97 V, max =  +3.63 V)
    +5V Voltage:           +4.93 V  (min =  +4.50 V, max =  +5.50 V)
    +12V Voltage:         +12.26 V  (min = +10.20 V, max = +13.80 V)
    CPU Temperature:       +34.0 C  (high = +40.0 C, crit = +90.0 C)
    MB Temperature:        +30.0 C  (high = +35.0 C, crit = +95.0 C)
    NB Temperature:        +46.0 C  (high = +65.0 C, crit = +95.0 C)
    SB Temperature:        +40.0 C  (high = +35.0 C, crit = +75.0 C)
    OPT_TEMP1 Temperature:  +0.0 C  (high =  +0.0 C, crit = +90.0 C)
    OPT_TEMP2 Temperature:  +0.0 C  (high =  +0.0 C, crit = +90.0 C)
    OPT_TEMP3 Temperature:  +0.0 C  (high =  +0.0 C, crit = +90.0 C)

The help tp atk0110-acpi-0 says:
CONFIG_SENSORS_ATK0110
 If you say yes here you get support for the ACPI hardware
 monitoring interface found in many ASUS motherboards. This
 driver will provide readings of fans, voltages and temperatures
 through the system firmware.
 
The BIOS of this motherboard has displays for fan speeds and even
limits to give alarms on certain conditions.

Neither running sensors-detect nor examination of the output of

    sudo lspci -k

has given me a hint.

How can I get these additonal informations?

Best regards,
mcc