From: Roman Dobosz <gryf73@op.pl>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] write failed on dvd with growisofs
Date: Sun, 15 Aug 2010 21:28:35 +0200 [thread overview]
Message-ID: <20100815212835.183ec73e.gryf73@op.pl> (raw)
In-Reply-To: <20100810202726.GA4637@laptop.gs>
On Tue, 10 Aug 2010 22:27:27 +0200
linux@gabriel-striewe.de wrote:
> I am incurring a strange problem when trying to burn DVDs. When I
> apply the command:
>
> # growisofs -dvd-compat -Z /dev/sr0 -R -J test/
[...]
I have the similar problem on standard kernel 2.6.34-gentoo-r1:
# growisofs -Z /dev/sr0 -R -J -V "test" /mnt/data/t
Executing 'mkisofs -R -J -V test /mnt/data/t | builtin_dd of=/dev/sr0 obs=32k seek=0'
Setting input-charset to 'UTF-8' from locale.
0.74% done, estimate finish Sun Aug 15 20:56:13 2010
1.49% done, estimate finish Sun Aug 15 20:56:13 2010
2.23% done, estimate finish Sun Aug 15 20:56:13 2010
/dev/sr0: "Current Write Speed" is 20.5x1352KBps.
:-[ WRITE@LBA=10h failed with SK=5h/INVALID ADDRESS FOR WRITE]: Invalid argument
:-( write failed: Invalid argument
/dev/sr0: flushing cache
/dev/sr0: updating RMA
/dev/sr0: closing session
/dev/sr0: reloading tray
I've used Verbatim DVD-R, which I've successfully used before (like
one year before), but this time it is always like this.
My system doesn't use hald:
# /etc/init.d/hald status
* status: stopped
Also, cdrecord doesn't work:
# cdrecord -v -dev=4,0,0 /mnt/data/t.iso
cdrecord: No write mode specified.
cdrecord: Assuming -sao mode.
cdrecord: If your drive does not accept -sao, try -tao.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
Cdrecord-ProDVD-ProBD-Clone 3.00 (i686-pc-linux-gnu) Copyright (C) 1995-2010 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '4,0,0'
scsibus: 4 target: 0 lun: 0
Linux sg driver version: 3.5.34
Using libscg version 'schily-0.9'.
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'PIONEER '
Identifikation : 'DVD-RW DVR-216D'
Revision : '1.08'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD-R sequential recording
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-R/DL layer jump recording
Profile: DVD-R/DL sequential recording
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording (current)
Profile: DVD-ROM (current)
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 1605632 = 1568 KB
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
FIFO size : 4194304 = 4096 KB
Track 01: data 1313 MB
Total size: 1313 MB = 672399 sectors
Current Secsize: 2048
Total power on hours: 75040
WARNING: Phys disk size 16 differs from rzone size 0! Prerecorded disk?
WARNING: Phys start: 196608 Phys end 196623
WARNING: Drive returns zero media size. Using media size from ADIP.
Blocks total: 16 Blocks current: -93936 Blocks remaining: -766335
cdrecord: Data does not fit on current disk.
Please, note, that ISO image have 1.2 GB so it should fit on DVD-R
I'm using Verbatim discs, which is recognized by cdrecord as:
# cdrecord -v -minfo
Cdrecord-ProDVD-ProBD-Clone 3.00 (i686-pc-linux-gnu) Copyright (C) 1995-2010 Jörg Schilling
TOC Type: 1 = CD-ROM
Linux sg driver version: 3.5.34
Using libscg version 'schily-0.9'.
SCSI buffer size: 32768
No target specified, trying to find one...
Using dev=4,0,0.
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'PIONEER '
Identifikation : 'DVD-RW DVR-216D'
Revision : '1.08'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD-R sequential recording
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-R/DL layer jump recording
Profile: DVD-R/DL sequential recording
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording (current)
Profile: DVD-ROM (current)
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 1605632 = 1568 KB
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
Current Secsize: 2048
Total power on hours: 75040
book type: DVD-R, Version 2.0x -> 2.1 (2.5)
disc size: 120mm (0)
maximum rate: Not specified (15)
number of layers:1
track path: Parallel Track Path (0)
layer type: Rewritable Area (2)
linear density: 0.267 µm/bit (0)
track density: 0.74 µm/track (0)
phys start: 196608 (0x30000)
phys end: 196623
end layer 0: 0
bca: 0
phys size:... 16
copyr prot type: 0
region mgt info: 0
cpm: 0
cgms: 0
last rma sector: 0
application code:64
physical code: 193
last rec address:16621272
part v./ext code:5/2
ind wr. power: 133
wavelength code: 13
write str. code: 0E 88 9A 80
Manufacturer: 'MCC 03RG20 '
rzone size: 36
rzone number: 1
border number: 1
ljrs: 0
track mode: 4 copy: 0
damage: 0
reserved track: 0 blank: 0 incremental: 1 fp: 0
data mode: 1
lra valid: 1
nwa valid: 0
rzone start: 0
next wr addr: 0
free blocks: 0
blocking factor: 16
rzone size: 65264
last recorded addr: 15
Capacity Blklen/Sparesz. Format-type Type
65264 2048 0x00 Formatted Media
WARNING: Phys disk size 16 differs from rzone size 0! Prerecorded disk?
WARNING: Phys start: 196608 Phys end 196623
WARNING: Drive returns zero media size. Using media size from ADIP.
Mounted media class: DVD
Mounted media type: DVD-R sequential recording
Disk Is not erasable
data type: standard
disk status: incomplete/appendable
session status: empty
BG format status: none
first track: 1
number of sessions: 2
first track in last sess: 2
last track in last sess: 2
Disk Is unrestricted
Disk type: DVD, HD-DVD or BD
Track Sess Type Start Addr End Addr Size
==============================================
1 1 Data 0 65263 65264 -1
2 2 Blank 93952 2297887 2203936 28688
Last session start address: 0
Last session leadout start address: 65264
Next writable address: 93952
Remaining writable size: 2203936
Any hints?
--
-^- _ coś tam w tle sobie gra, np:
_ /O)_\// Blindead - Suicidal
(_(|__(_(_) grf.
next prev parent reply other threads:[~2010-08-15 20:03 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-10 20:27 [gentoo-user] write failed on dvd with growisofs linux
2010-08-10 21:14 ` Joerg Schilling
2010-08-11 12:24 ` linux
2010-08-11 13:18 ` Joerg Schilling
2010-08-11 13:35 ` linux
[not found] ` <4c62bb1d.ZdBA0cyMxvmVVX94%Joerg.Schilling@fokus.fraunhofer.de>
2010-08-11 17:38 ` linux
2010-08-11 16:06 ` Joerg Schilling
2010-08-13 11:47 ` [gentoo-user] write failed on dvd with growisofs [SOLVED] Gabriel Striewe
2010-08-10 21:15 ` [gentoo-user] write failed on dvd with growisofs linux
2010-08-15 19:28 ` Roman Dobosz [this message]
2010-08-16 12:29 ` Joerg Schilling
2010-08-16 18:54 ` Roman Dobosz
2010-08-16 19:47 ` Roman Dobosz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100815212835.183ec73e.gryf73@op.pl \
--to=gryf73@op.pl \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox