From: meino.cramer@gmx.de
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Re: Harddisk trouble ... or not yet?
Date: Sat, 29 May 2010 05:47:07 +0200 [thread overview]
Message-ID: <20100529034707.GA5069@solfire> (raw)
In-Reply-To: <htpjc5$k3$1@dough.gmane.org>
walt <w41ter@gmail.com> [10-05-29 03:21]:
> On 05/27/2010 06:54 PM, meino.cramer@gmx.de wrote:
>
> >ata1.00: configured for UDMA/33
>
> I know nothing about the new large-sector disks, but the line above
> makes
> me worried that the disk driver doesn't know any more than I do :)
>
> Anyone know if that is the expected response from the disk driver?
>
>
I played around a little more with this "effects"...
At the WD-site there is a paper (pdf), which describes how to
jumper the WD-SATAs to behave as SATA1 even if being SATA2, which
I did.
Then I checked the cableing again and booted the system from a sdb,
which is my "old" system disk which I previously (before this hassle)
to replace with the WD 1TB-disks, since on the old disk there was
not enoughspace anymore.
Then I mounted two partitions (root and an empty one) of the WD-drive
and copied the root to the empty partition by
cp -a <src> <dest>
The process starts and after some blinks of the HD-LED I got again
such in the kernel log:
(there is more things I wrote below this log... ;)
ata1.00: cmd c8/00:00:68:a1:61/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:df:68:a1:61/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:79:7f/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:df:68:79:7f/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:19:84/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:3f:68:19:84/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:a8:85/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:8f:68:a8:85/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:3b:86/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:8f:68:3b:86/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:83:87/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:0f:68:83:87/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:61:88/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:6f:68:61:88/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:c7:89/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:df:68:c7:89/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:72:8c/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:4f:68:72:8c/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:1c:90/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:af:68:1c:90/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:fc:98/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:00:68:fc:98/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:0b:a6/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:5f:68:0b:a6/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:c7:ae/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:ef:68:c7:ae/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:83:b1/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:cf:68:83:b1/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:83:b7/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:00:68:83:b7/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:a0:bf/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:2f:68:a0:bf/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:b6:c6/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:0f:68:b6:c6/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:b8:ce/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:0f:68:b8:ce/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:ef:d5/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:2f:68:ef:d5/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:f9:de/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:2f:68:f9:de/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:cb:f2/00:00:00:00:00/e4 tag 0 dma 131072 in
res 51/84:4f:68:cb:f2/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:de:13/00:00:00:00:00/e5 tag 0 dma 131072 in
res 51/84:00:68:de:13/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:5c:4b/00:00:00:00:00/e5 tag 0 dma 131072 in
res 51/84:4f:68:5c:4b/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:92:7e/00:00:00:00:00/e5 tag 0 dma 131072 in
res 51/84:7f:68:92:7e/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:e9:80/00:00:00:00:00/e5 tag 0 dma 131072 in
res 51/84:2f:68:e9:80/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:3c:90/00:00:00:00:00/e5 tag 0 dma 131072 in
res 51/84:9f:68:3c:90/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:75:b2/00:00:00:00:00/e5 tag 0 dma 131072 in
res 51/84:6f:68:75:b2/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:7d:ba/00:00:00:00:00/e5 tag 0 dma 131072 in
res 51/84:4f:68:7d:ba/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:2a:bd/00:00:00:00:00/e5 tag 0 dma 131072 in
res 51/84:5f:68:2a:bd/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:52:c0/00:00:00:00:00/e5 tag 0 dma 131072 in
res 51/84:2f:68:52:c0/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:ad:c5/00:00:00:00:00/e5 tag 0 dma 131072 in
res 51/84:af:68:ad:c5/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:c0:d5/00:00:00:00:00/e5 tag 0 dma 131072 in
res 51/84:4f:68:c0:d5/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:47:e2/00:00:00:00:00/e5 tag 0 dma 131072 in
res 51/84:cf:68:47:e2/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:e6:f2/00:00:00:00:00/e5 tag 0 dma 131072 in
res 51/84:bf:68:e6:f2/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:d8:fb/00:00:00:00:00/e5 tag 0 dma 131072 in
res 51/84:3f:68:d8:fb/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:16:05/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:3f:68:16:05/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:ef:15/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:bf:68:ef:15/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:5d:25/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:4f:68:5d:25/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:c6:2d/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:ef:68:c6:2d/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:42:2f/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:5f:68:42:2f/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:cd:4e/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:df:68:cd:4e/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:53:5b/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:af:68:53:5b/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:9b:71/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:8f:68:9b:71/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:93:7b/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:1f:68:93:7b/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:ca:84/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:9f:68:ca:84/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:80:c0/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:00:68:80:c0/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:9a:c6/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:1f:68:9a:c6/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:3a:c9/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:6f:68:3a:c9/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:17:cf/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:00:68:17:cf/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:cb:d8/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:af:68:cb:d8/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:77:de/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:af:68:77:de/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:51:e4/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:1f:68:51:e4/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:b1:ef/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:4f:68:b1:ef/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:b2:f0/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:bf:68:b2:f0/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:f5:f2/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:8f:68:f5:f2/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:d7:f8/00:00:00:00:00/e6 tag 0 dma 131072 in
res 51/84:2f:68:d7:f8/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:24:06/00:00:00:00:00/e7 tag 0 dma 131072 in
res 51/84:df:68:24:06/00:00:00:00:00/e7 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:06:19/00:00:00:00:00/e7 tag 0 dma 131072 in
res 51/84:df:68:06:19/00:00:00:00:00/e7 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:09:73/00:00:00:00:00/e7 tag 0 dma 131072 in
res 51/84:0f:68:09:73/00:00:00:00:00/e7 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:27:83/00:00:00:00:00/e7 tag 0 dma 131072 in
res 51/84:6f:68:27:83/00:00:00:00:00/e7 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:0e:8d/00:00:00:00:00/e7 tag 0 dma 131072 in
res 51/84:cf:68:0e:8d/00:00:00:00:00/e7 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:5a:ad/00:00:00:00:00/e7 tag 0 dma 131072 in
res 51/84:1f:68:5a:ad/00:00:00:00:00/e7 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:8d:b6/00:00:00:00:00/e7 tag 0 dma 131072 in
res 51/84:3f:68:8d:b6/00:00:00:00:00/e7 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:99:db/00:00:00:00:00/e7 tag 0 dma 131072 in
res 51/84:00:68:99:db/00:00:00:00:00/e7 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:4e:dd/00:00:00:00:00/e7 tag 0 dma 131072 in
res 51/84:0f:68:4e:dd/00:00:00:00:00/e7 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:cf:0b/00:00:00:00:00/e8 tag 0 dma 131072 in
res 51/84:7f:68:cf:0b/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:f8:70:31:1f/00:00:00:00:00/e8 tag 0 dma 126976 in
res 51/84:a7:70:31:1f/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:98:3c/00:00:00:00:00/e8 tag 0 dma 131072 in
res 51/84:af:68:98:3c/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:03:5a/00:00:00:00:00/e8 tag 0 dma 131072 in
res 51/84:9f:68:03:5a/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:ab:5c/00:00:00:00:00/e8 tag 0 dma 131072 in
res 51/84:bf:68:ab:5c/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:3e:8e/00:00:00:00:00/e8 tag 0 dma 131072 in
res 51/84:ef:68:3e:8e/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:48:a8/00:00:00:00:00/e8 tag 0 dma 131072 in
res 51/84:6f:68:48:a8/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:89:ad/00:00:00:00:00/e8 tag 0 dma 131072 in
res 51/84:7f:68:89:ad/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:f8:ad/00:00:00:00:00/e8 tag 0 dma 131072 in
res 51/84:3f:68:f8:ad/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:84:bd/00:00:00:00:00/e8 tag 0 dma 131072 in
res 51/84:bf:68:84:bd/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:d7:bd/00:00:00:00:00/e8 tag 0 dma 131072 in
res 51/84:2f:68:d7:bd/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:68:13:e1/00:00:00:00:00/e8 tag 0 dma 131072 in
res 51/84:ef:68:13:e1/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/33
ata1: EH complete
Before and after the copy-process I did a
hdparm -I /dev/sda
BEFORE (excerpt):
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 128, current value: 254
>>>>>> DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AFTER (excerpt):
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 128, current value: 254
>>>>>> DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5 udma6
Then I did a
dd if=/dev/sda of=/dev/null bs=65536
And after lots of error like those above I did
killall -USR1 dd
and got back (excerpt):
108477333504 bytes (108 GB) copied, 1013.81 s, 107 MB/s
which looks like relatively fast, which is not necessarily
"reliable"...
The things, which most important for me is:
WHAT is defective and have to be replaced?
Do I need another/newer motherboard (mine is a ASUS AV8/VIa
AK8T800Pro)?
Do I have to return the harddisks?
Thank you very much in advance for any help!
Best regards,
mcc
--
Please don't send me any Word- or Powerpoint-Attachments
unless it's absolutely neccessary. - Send simply Text.
See http://www.gnu.org/philosophy/no-word-attachments.html
In a world without fences and walls nobody needs gates and windows.
next prev parent reply other threads:[~2010-05-29 4:04 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-26 3:15 [gentoo-user] Harddisk trouble ... or not yet? meino.cramer
2010-05-26 6:38 ` [gentoo-user] howto increase INODE kitti jaisong
2010-05-26 7:09 ` Bert Swart
2010-05-26 11:16 ` Volker Armin Hemmann
2010-05-26 12:55 ` Alex Schuster
2010-05-26 11:17 ` [gentoo-user] Harddisk trouble ... or not yet? Volker Armin Hemmann
2010-05-26 14:22 ` [gentoo-user] " Grant Edwards
2010-05-26 17:09 ` meino.cramer
2010-05-26 17:59 ` Volker Armin Hemmann
2010-05-26 19:05 ` Neil Bothwick
2010-05-26 19:13 ` Volker Armin Hemmann
2010-05-26 20:40 ` Neil Bothwick
2010-05-27 0:19 ` meino.cramer
2010-05-27 1:48 ` walt
2010-05-27 2:43 ` meino.cramer
2010-05-27 3:52 ` W.Kenworthy
2010-05-27 4:29 ` Iain Buchanan
2010-05-27 9:39 ` Andrea Conti
2010-05-28 1:54 ` meino.cramer
2010-05-28 23:24 ` walt
2010-05-29 3:47 ` meino.cramer [this message]
2010-05-29 7:25 ` Andrea Conti
2010-05-29 8:16 ` Volker Armin Hemmann
2010-05-29 19:05 ` Alan McKinnon
2010-05-29 20:08 ` Volker Armin Hemmann
2010-05-29 8:56 ` meino.cramer
2010-05-29 19:13 ` Andrea Conti
2010-05-27 8:17 ` Stroller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100529034707.GA5069@solfire \
--to=meino.cramer@gmx.de \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox