From: meino.cramer@gmx.de
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] dvd playing problems
Date: Tue, 11 May 2010 20:36:10 +0200 [thread overview]
Message-ID: <20100511183610.GB6285@solfire> (raw)
In-Reply-To: <4BE99730.1080201@gentooist.com>
Xavier Parizet <xav@gentooist.com> [10-05-11 19:48]:
> On 05/11/2010 06:42 PM, meino.cramer@gmx.de wrote:
> > Hi,
> >
> > when playing dvds the movie gets stopped from time to time
> > and restarts itsself after a short oeriod of idle some frames
> > after the position where it halted.
> >
> > I took a look into the log file and found this:
> >
> >
> > hda: command error: status=0x51 { DriveReady SeekComplete Error }
> > hda: command error: error=0x50 { LastFailedSense=0x05 }
> > hda: possibly failed opcode: 0xa0
> > end_request: I/O error, dev hda, sector 13053192
> > Buffer I/O error on device hda, logical block 3263298
> > Buffer I/O error on device hda, logical block 3263299
> > Buffer I/O error on device hda, logical block 3263300
> > Buffer I/O error on device hda, logical block 3263301
> > Buffer I/O error on device hda, logical block 3263302
> > Buffer I/O error on device hda, logical block 3263303
> > Buffer I/O error on device hda, logical block 3263304
> > Buffer I/O error on device hda, logical block 3263305
> > hda: command error: status=0x51 { DriveReady SeekComplete Error }
> > hda: command error: error=0x50 { LastFailedSense=0x05 }
> > hda: possibly failed opcode: 0xa0
> > end_request: I/O error, dev hda, sector 13053192
> > Buffer I/O error on device hda, logical block 3263298
> > Buffer I/O error on device hda, logical block 3263299
> > hda: command error: status=0x51 { DriveReady SeekComplete Error }
> > hda: command error: error=0x50 { LastFailedSense=0x05 }
> > hda: possibly failed opcode: 0xa0
> > end_request: I/O error, dev hda, sector 13053192
> >
> >
> > Does this mean my drive is bad? The dvd itsself does not have any
> > visible scratches or something like that...
> >
> > Or is it possible, that something below the application layer
> > and above the hardware layer has problems?
> >
> > This symptom is noticeable with vlc as with mplayer.
> >
> > Any hint/help is very appreciated. Thank you very much in advance!
> >
> > Linux solfire 2.6.32.12 #2 SMP PREEMPT Sat May 8 19:54:40 CEST 2010 i686 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ AuthenticAMD GNU/Linux
> > VLC version 1.0.6 Goldeneye
> > Player SVN-r30554-4.3.4
> > The linux kernel is the vanilla version.
>
> Try to use PATA drivers better than olds ATA/IDE drivers. The drive
> should be recognized as sr0 when it's well configured. An lspci -k may
> help us.
>
> > Best regards,
> > mcc
>
> --
> Xavier Parizet
> YaGB : http://gentooist.com
> GPG : C7DC B10E FC21 63BE
> B453 D239 F6E6 DF65 1569 91BF
>
Here is the output of lspci -k:
00:00.0 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
Subsystem: ASUSTeK Computer Inc. A8V Deluxe
Kernel driver in use: agpgart-amd64
00:00.1 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus)
Kernel driver in use: skge
00:0d.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
Subsystem: Avermedia Technologies Inc AverMedia AVerTV DVB-T 771
Kernel driver in use: bttv
Kernel modules: bttv
00:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
Subsystem: Avermedia Technologies Inc AverMedia AVerTV DVB-T 771
Kernel driver in use: bt878
Kernel modules: bt878
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
Subsystem: ASUSTeK Computer Inc. A7V600/K8V Deluxe/K8V-X/A8V Deluxe motherboard
Kernel driver in use: sata_via
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Kernel driver in use: VIA_IDE
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Kernel modules: i2c-viapro
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
Subsystem: ASUSTeK Computer Inc. A8V Deluxe motherboard (Realtek ALC850 codec)
Kernel driver in use: VIA 82xx Audio
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Kernel driver in use: k8temp
Kernel modules: k8temp
01:00.0 VGA compatible controller: nVidia Corporation G73 [GeForce 7600 GT] (rev a2)
Subsystem: Micro-Star International Co., Ltd. Device 0640
Kernel driver in use: nvidia
Kernel modules: nvidia
Fingers crossed, that is software-fixable ;)
Thanks a lot for your help!
Best regards,
mcc
--
Please don't send me any Word- or Powerpoint-Attachments
unless it's absolutely neccessary. - Send simply Text.
See http://www.gnu.org/philosophy/no-word-attachments.html
In a world without fences and walls nobody needs gates and windows.
next prev parent reply other threads:[~2010-05-11 18:37 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-11 16:42 [gentoo-user] dvd playing problems meino.cramer
2010-05-11 17:33 ` [gentoo-user] " Grant Edwards
2010-05-11 17:43 ` [gentoo-user] " Xavier Parizet
2010-05-11 18:36 ` meino.cramer [this message]
2010-05-11 19:00 ` Xavier Parizet
2010-05-12 2:20 ` meino.cramer
2010-05-12 3:32 ` meino.cramer
2010-05-12 13:45 ` [gentoo-user] " Grant Edwards
2010-05-12 17:21 ` meino.cramer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100511183610.GB6285@solfire \
--to=meino.cramer@gmx.de \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox