Re: [gentoo-user] cdrecord fails to burn dvd

["José Romildo Malaquias" <j.romildo@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 1414 bytes --]

On Thu, Nov 19, 2009 at 12:33:40PM +0100, Joerg Schilling wrote:
> José Romildo Malaquias <j.romildo@gmail.com> wrote:
> 
> > On Mon, Nov 16, 2009 at 03:43:12PM +0100, Joerg Schilling wrote:
> > > José Romildo Malaquias <j.romildo@gmail.com> wrote:
> > > 
> > > To find the reason for the following "Impossible" because
> > > illegal error situation:
> > > 
> > > Executing 'test unit ready' command on Bus 0 Target 6, Lun 0 timeout 40s
> > > CDB:  00 00 00 00 00 00
> > > cdrecord: Input/output error. test unit ready: scsi sendcmd: fatal error
> > > CDB:  00 00 00 00 00 00
> > > cmd finished after 0.000s timeout 40s
> > > 
> > > 
> > > please run the command again and add debug=2 to the list of options.
> >
> > I am attaching the compressed output of the command:
> >
> >   script -f -c "cdrecord -v debug=2 -sao -eject speed=8 fs=256m driveropts=burnfree /var/tmp/image.iso" cdrecord.log
> 
> I cannot see any problem like the problem above.
> 
> BTW: this may be caused by the fact that you did not simply add debug=2
> but at the same time removed -V.

I have run the cdrecord command again, this time passing "-V" and "debug=2":

$ script -f -c "cdrecord -vvv -V debug=2 -sao -eject speed=8 fs=256m driveropts=burnfree /var/tmp/image.iso" cdrecord.log

and the compressed log is attached.

I hope you can find anything useful to understand what is happening.

Romildo

[-- Attachment #2: cdrecord.log.bz2 --]
[-- Type: application/x-bzip2, Size: 140047 bytes --]