[gentoo-user] 2.6.30 and reiserfs?

[gentoo-user] 2.6.30 and reiserfs?

[Konstantinos Agouros]

Hi,

I am using reiserfs just for my squid-cache nevertheless after I booted
2.6.30-r4 on an amd64 system, I couldn't create any files on that
partition. Is there a way to convert the partition to work or do I really
have to change filesystems?

Regards,

Konstantin
-- 
Dipl-Inf. Konstantin Agouros aka Elwood Blues. Internet: elwood@agouros.de
Otkerstr. 28, 81547 Muenchen, Germany. Tel +49 89 69370185
----------------------------------------------------------------------------
"Captain, this ship will not survive the forming of the cosmos." B'Elana Torres

Re: [gentoo-user] 2.6.30 and reiserfs?

[Dirk Heinrichs]

Am Samstag 12 September 2009 12:46:56 schrieb Konstantinos Agouros:

> I am using reiserfs just for my squid-cache nevertheless after I booted
> 2.6.30-r4 on an amd64 system, I couldn't create any files on that
> partition. Is there a way to convert the partition to work or do I really
> have to change filesystems?

What does fsck say?

Bye...

	Dirk

Re: [gentoo-user] 2.6.30 and reiserfs?

[Massimo Gengarelli]

bottom:-

On Sat, Sep 12, 2009 at 10:46:56AM +0000, Konstantinos Agouros wrote:
> Hi,
> 
> I am using reiserfs just for my squid-cache nevertheless after I booted
> 2.6.30-r4 on an amd64 system, I couldn't create any files on that
> partition. Is there a way to convert the partition to work or do I really
> have to change filesystems?
> 

I'm currently using ReiserFS (along with 2.6.30-r6 but I've also used
2.6.30-r4) for my boot partition and I'm able to write in it, without
any kind of problem.
Could it be a mountpoint problem?

-- 
      _	  * Massimo Gengarelli <massimo.gengarelli@gmail.com>
 ~0  (_|  * Computer Science student @ http://www.unibo.it 
|(_~|^~~| * http://massitm.sohead.org <-- my personal, outdated website
TT/_ T"T  * With your bare hands?!?

Re: [gentoo-user] 2.6.30 and reiserfs?

[Konstantinos Agouros]

In <200909121253.41009.dirk.heinrichs@online.de> dirk.heinrichs@online.de (Dirk Heinrichs) writes:

>Am Samstag 12 September 2009 12:46:56 schrieb Konstantinos Agouros:

>> I am using reiserfs just for my squid-cache nevertheless after I booted
>> 2.6.30-r4 on an amd64 system, I couldn't create any files on that
>> partition. Is there a way to convert the partition to work or do I really
>> have to change filesystems?

>What does fsck say?
It says: "All is good". I tried that. The error message complains about not
being able to set times properly.

>Bye...

>	Dirk

-- 
Dipl-Inf. Konstantin Agouros aka Elwood Blues. Internet: elwood@agouros.de
Otkerstr. 28, 81547 Muenchen, Germany. Tel +49 89 69370185
----------------------------------------------------------------------------
"Captain, this ship will not survive the forming of the cosmos." B'Elana Torres

Re: [gentoo-user] 2.6.30 and reiserfs?

[Konstantinos Agouros]

In <20090912111909.GA11184@lechuck> massimo.gengarelli@gmail.com (Massimo Gengarelli) writes:


>bottom:-

>On Sat, Sep 12, 2009 at 10:46:56AM +0000, Konstantinos Agouros wrote:
>> Hi,
>> 
>> I am using reiserfs just for my squid-cache nevertheless after I booted
>> 2.6.30-r4 on an amd64 system, I couldn't create any files on that
>> partition. Is there a way to convert the partition to work or do I really
>> have to change filesystems?
>> 

>I'm currently using ReiserFS (along with 2.6.30-r6 but I've also used
>2.6.30-r4) for my boot partition and I'm able to write in it, without
>any kind of problem.
>Could it be a mountpoint problem?
Do I need to change anything in the options when mounting? I fell back
to 2.6.29-r5 no problem there.

Regards,

Konstantin

>-- 
>      _	  * Massimo Gengarelli <massimo.gengarelli@gmail.com>
> ~0  (_|  * Computer Science student @ http://www.unibo.it 
>|(_~|^~~| * http://massitm.sohead.org <-- my personal, outdated website
>TT/_ T"T  * With your bare hands?!?

-- 
Dipl-Inf. Konstantin Agouros aka Elwood Blues. Internet: elwood@agouros.de
Otkerstr. 28, 81547 Muenchen, Germany. Tel +49 89 69370185
----------------------------------------------------------------------------
"Captain, this ship will not survive the forming of the cosmos." B'Elana Torres

Re: [gentoo-user] 2.6.30 and reiserfs?

[Dirk Heinrichs]

Am Sonntag 13 September 2009 10:08:33 schrieb Konstantinos Agouros:

> It says: "All is good". I tried that. The error message complains about not
> being able to set times properly.

What _exactly_ does it say?

Bye...

	Dirk

Re: [gentoo-user] 2.6.30 and reiserfs?

[Mick]

[-- Attachment #1: Type: text/plain, Size: 1226 bytes --]

On Sunday 13 September 2009, Konstantinos Agouros wrote:
> In <20090912111909.GA11184@lechuck> massimo.gengarelli@gmail.com (Massimo 
Gengarelli) writes:
> >bottom:-
> >
> >On Sat, Sep 12, 2009 at 10:46:56AM +0000, Konstantinos Agouros wrote:
> >> Hi,
> >>
> >> I am using reiserfs just for my squid-cache nevertheless after I booted
> >> 2.6.30-r4 on an amd64 system, I couldn't create any files on that
> >> partition. Is there a way to convert the partition to work or do I
> >> really have to change filesystems?
> >
> >I'm currently using ReiserFS (along with 2.6.30-r6 but I've also used
> >2.6.30-r4) for my boot partition and I'm able to write in it, without
> >any kind of problem.
> >Could it be a mountpoint problem?
>
> Do I need to change anything in the options when mounting? I fell back
> to 2.6.29-r5 no problem there.

I am using reiserfs on / and /home and have not experienced any problems with 
the gentoo-sources-2.6.30-r5/6.  So unless you've left some reiserfs fs 
drivers out of the kernel I am not sure why you may be experiencing problems.

This is my / mounting entry in fstab:

/dev/hda3      /     reiserfs        noatime              1 1

HTH.
-- 
Regards,
Mick

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

RE: [gentoo-user] 2.6.30 and reiserfs?

[Adam Carter]

> I am using reiserfs just for my squid-cache nevertheless
> after I booted
> 2.6.30-r4 on an amd64 system, I couldn't create any files on that
> partition. Is there a way to convert the partition to work or
> do I really have to change filesystems?

I had some weirdness with .30 and reiser. I was using .30 sucessfully for a few days, then had to hard reset but reiser had problems mounting on reboot. I tried booting .30 twice with no luck. Booted .29 and it worked fine - in fact no messages about the filesystem at all - it just loaded normally. I didn't bother persuing it because I had read about similar issues with .30 (IIRC on this list) and figured it was probably a kernel bug....

RE: [gentoo-user] 2.6.30 and reiserfs?

[William Kenworthy]

That could have been me - oops in reiserfs "slowpath" (seen in dmesg or
logs) .  The good (great news for me) is that the bug has gone away in
2.6.31 ...

BillK

On Mon, 2009-09-14 at 10:25 +1000, Adam Carter wrote:
> > I am using reiserfs just for my squid-cache nevertheless
> > after I booted
> > 2.6.30-r4 on an amd64 system, I couldn't create any files on that
> > partition. Is there a way to convert the partition to work or
> > do I really have to change filesystems?
> 
> I had some weirdness with .30 and reiser. I was using .30 sucessfully for a few days, then had to hard reset but reiser had problems mounting on reboot. I tried booting .30 twice with no luck. Booted .29 and it worked fine - in fact no messages about the filesystem at all - it just loaded normally. I didn't bother persuing it because I had read about similar issues with .30 (IIRC on this list) and figured it was probably a kernel bug....
> 
-- 
William Kenworthy <billk@iinet.net.au>
Home in Perth!

Re: [gentoo-user] 2.6.30 and reiserfs?

[Alan McKinnon]

On Monday 14 September 2009 02:25:45 Adam Carter wrote:
> > I am using reiserfs just for my squid-cache nevertheless
> > after I booted
> > 2.6.30-r4 on an amd64 system, I couldn't create any files on that
> > partition. Is there a way to convert the partition to work or
> > do I really have to change filesystems?
> 
> I had some weirdness with .30 and reiser. I was using .30 sucessfully for a
>  few days, then had to hard reset but reiser had problems mounting on
>  reboot. I tried booting .30 twice with no luck. Booted .29 and it worked
>  fine - in fact no messages about the filesystem at all - it just loaded
>  normally. I didn't bother persuing it because I had read about similar
>  issues with .30 (IIRC on this list) and figured it was probably a kernel
>  bug....
> 

I have no issues whatsoever on this amd64 notebook with 2.6.30 and reiser. 
It's now on 2.6.31 and still working fine. My ancient x86 file server is still 
on 2.6.29, mostly as I'd read the same report you did.

The problematic combination reported then was x86, reiser, 2.6.30, IDE chipset

-- 
alan dot mckinnon at gmail dot com

Re: [gentoo-user] 2.6.30 and reiserfs?

[Konstantinos Agouros]

In <200909141125.49642.alan.mckinnon@gmail.com> alan.mckinnon@gmail.com (Alan McKinnon) writes:

>On Monday 14 September 2009 02:25:45 Adam Carter wrote:
>> > I am using reiserfs just for my squid-cache nevertheless
>> > after I booted
>> > 2.6.30-r4 on an amd64 system, I couldn't create any files on that
>> > partition. Is there a way to convert the partition to work or
>> > do I really have to change filesystems?
>> 
>> I had some weirdness with .30 and reiser. I was using .30 sucessfully for a
>>  few days, then had to hard reset but reiser had problems mounting on
>>  reboot. I tried booting .30 twice with no luck. Booted .29 and it worked
>>  fine - in fact no messages about the filesystem at all - it just loaded
>>  normally. I didn't bother persuing it because I had read about similar
>>  issues with .30 (IIRC on this list) and figured it was probably a kernel
>>  bug....
>> 

>I have no issues whatsoever on this amd64 notebook with 2.6.30 and reiser. 
>It's now on 2.6.31 and still working fine. My ancient x86 file server is still 
>on 2.6.29, mostly as I'd read the same report you did.

>The problematic combination reported then was x86, reiser, 2.6.30, IDE chipset
AMD64, reiser, sata (3ware)... strange

>-- 
>alan dot mckinnon at gmail dot com

-- 
Dipl-Inf. Konstantin Agouros aka Elwood Blues. Internet: elwood@agouros.de
Altersheimerstr. 1, 81545 Muenchen, Germany. Tel +49 89 69370185
----------------------------------------------------------------------------
"Captain, this ship will not survive the forming of the cosmos." B'Elana Torres

Re: [gentoo-user] 2.6.30 and reiserfs?

[Stroller]

On 14 Sep 2009, at 16:27, Konstantinos Agouros wrote:
> ...
> AMD64, reiser, sata (3ware)... strange

I  have had some weirdness recently with a 3ware 9500-S & 2.6.30- 
gentoo-r4, but since you still haven't told us ANYTHING about the  
problem you're encountering, it's a little difficult to help.

Stroller.

RE: [gentoo-user] 2.6.30 and reiserfs?

[Adam Carter]

> I have no issues whatsoever on this amd64 notebook with
> 2.6.30 and reiser.
> It's now on 2.6.31 and still working fine. My ancient x86
> file server is still
> on 2.6.29, mostly as I'd read the same report you did.
>
> The problematic combination reported then was x86, reiser,
> 2.6.30, IDE chipset

FWIW I had problems with amd64 (Dell Studio 1737). Perhaps a different issue. Also the hard lock up that preceeded the reiser issue occurred multiple times on .30, whereas .29 is solid.

Re: [gentoo-user] 2.6.30 and reiserfs?

[Konstantinos Agouros]

In <CD21CC1D-79EF-431E-94BD-9374FCCA165E@stellar.eclipse.co.uk> stroller@stellar.eclipse.co.uk (Stroller) writes:


>On 14 Sep 2009, at 16:27, Konstantinos Agouros wrote:
>> ...
>> AMD64, reiser, sata (3ware)... strange

>I  have had some weirdness recently with a 3ware 9500-S & 2.6.30- 
>gentoo-r4, but since you still haven't told us ANYTHING about the  
>problem you're encountering, it's a little difficult to help.
If You read the whole thread You would have seen, that I did. But for
You again:

file creation is not possible (eg touch foo) with the error message
'can not set times' (or similar, i had to fall back to 2.6.29 since
this is a production system).

Regards,

Konstantin

>Stroller.


-- 
Dipl-Inf. Konstantin Agouros aka Elwood Blues. Internet: elwood@agouros.de
Altersheimerstr. 1, 81545 Muenchen, Germany. Tel +49 89 69370185
----------------------------------------------------------------------------
"Captain, this ship will not survive the forming of the cosmos." B'Elana Torres