[gentoo-user] Re: Blocked packages emerging xfce4-meta

[gentoo-user] Re: Blocked packages emerging xfce4-meta

[Cinder Cinder]

   Sorry Joost, but when I redirct the output of emerge to a file with > 

Code:
# emerge -va --update --deep world > emerge-va-update-deep-world

... only two lines are written

Code:
These are the packages that would be merged, in order:

Calculating dependencies ... done!

I tried putting this line in in /etc/make.conf and ran emerge again

Code: /etc/make.conf
PORT_LOGDIR=/var/log/portage

But I can't find anything that looks relevant in /var/log/portage.
How do I get all the other messages out so you can see them?

Thank you kindly.

_____________________________________________________________
Get your FREE, LinuxWaves.com Email Now! --> http://www.LinuxWaves.com
Join Linux Discussions! --> http://Community.LinuxWaves.com

Re: [gentoo-user] Re: Blocked packages emerging xfce4-meta

[Alan McKinnon]

On Friday 04 September 2009 15:09:08 Cinder Cinder wrote:
>    Sorry Joost, but when I redirct the output of emerge to a file with >
> 
> Code:
> # emerge -va --update --deep world > emerge-va-update-deep-world
> 
> ... only two lines are written
> 
> Code:
> These are the packages that would be merged, in order:
> 
> Calculating dependencies ... done!
> 
> I tried putting this line in in /etc/make.conf and ran emerge again
> 
> Code: /etc/make.conf
> PORT_LOGDIR=/var/log/portage
> 
> But I can't find anything that looks relevant in /var/log/portage.
> How do I get all the other messages out so you can see them?

Copy paste from the screen into a mail

or try with -pv instead of -av.
-a waits for user input and can screw around with STDOUT

-- 
alan dot mckinnon at gmail dot com

Re: [gentoo-user] Re: Blocked packages emerging xfce4-meta

[Willie Wong]

On Fri, Sep 04, 2009 at 03:40:48PM +0200, Penguin Lover Alan McKinnon squawked:
> Copy paste from the screen into a mail
> 
> or try with -pv instead of -av.
> -a waits for user input and can screw around with STDOUT

Also, try adding 2>&1 to your redirect to send STDERR to the file too.
I'm not sure whether it is the case here, but oftentimes error messages
are not printed on STDOUT. 

W
-- 
All science is either physics or stamp collecting.
    ~Ernest Rutherford
Sortir en Pantoufles: up 1001 days, 13:33

Re: [gentoo-user] Re: Blocked packages emerging xfce4-meta

[Alan McKinnon]

On Friday 04 September 2009 16:42:40 Willie Wong wrote:
> On Fri, Sep 04, 2009 at 03:40:48PM +0200, Penguin Lover Alan McKinnon 
squawked:
> > Copy paste from the screen into a mail
> >
> > or try with -pv instead of -av.
> > -a waits for user input and can screw around with STDOUT
> 
> Also, try adding 2>&1 to your redirect to send STDERR to the file too.
> I'm not sure whether it is the case here, but oftentimes error messages
> are not printed on STDOUT.

In this case the poster is talking about emerge's normal output. While this 
may be many things, it will never ever be sent to STDERR so the inclusion of 
2> is certain to change nothing.


-- 
alan dot mckinnon at gmail dot com

Re: [gentoo-user] Re: Blocked packages emerging xfce4-meta

[Cinder Cinder]

--- alan.mckinnon@gmail.com wrote:

From: Alan McKinnon <alan.mckinnon@gmail.com>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Re: Blocked packages emerging xfce4-meta
Date: Fri, 4 Sep 2009 22:51:02 +0200

On Friday 04 September 2009 16:42:40 Willie Wong wrote:
> On Fri, Sep 04, 2009 at 03:40:48PM +0200, Penguin Lover Alan McKinnon 
squawked:
> > Copy paste from the screen into a mail
> >
> > or try with -pv instead of -av.
> > -a waits for user input and can screw around with STDOUT
> 
> Also, try adding 2>&1 to your redirect to send STDERR to the file too.
> I'm not sure whether it is the case here, but oftentimes error messages
> are not printed on STDOUT.

In this case the poster is talking about emerge's normal output. While this 
may be many things, it will never ever be sent to STDERR so the inclusion of 
2> is certain to change nothing.


-- 
alan dot mckinnon at gmail dot com


----------------------------------------------------------------------------------------------

Thanks for the feedback. 2>&1 was what I needed. I forgot about stderr.
So here's the output of...

Code:
# emerge -pv --update --deep world


These are the packages that would be merged, in order:

Calculating dependencies  ..\b\b... done!
[ebuild     U ] sys-devel/gnuconfig-20080928 [20070724] 41 kB
[ebuild     U ] dev-libs/expat-2.0.1-r2 [2.0.1] 436 kB
[ebuild     U ] dev-libs/gmp-4.2.4 [4.2.2] USE="-nocxx (-doc%)" 1,671 kB
[ebuild     U ] sys-devel/gcc-config-1.4.1 [1.4.0-r4] 0 kB
[ebuild     U ] sys-devel/autoconf-wrapper-6 [4-r3] 0 kB
[ebuild     U ] sys-libs/timezone-data-2009j [2007k] USE="nls" 361 kB
[ebuild     U ] app-arch/bzip2-1.0.5-r1 [1.0.5] USE="-static" 822 kB
[ebuild     U ] app-arch/cpio-2.9-r2 [2.9-r1] USE="nls" 741 kB
[ebuild     U ] sys-kernel/linux-headers-2.6.27-r2 [2.6.23-r3] 3,509 kB
[ebuild     U ] sys-devel/m4-1.4.12 [1.4.11] USE="-examples (-nls%*)" 751 kB
[ebuild     U ] sys-apps/sandbox-1.6-r2 [1.2.18.1-r2] 300 kB
[ebuild     U ] dev-libs/mpfr-2.4.1_p1 [2.3.0_p4] 883 kB
[ebuild     U ] net-misc/iputils-20071127 [20070202] USE="ipv6 -doc -static" 99 kB
[ebuild     U ] app-shells/bash-3.2_p39 [3.2_p17-r1] USE="nls -afs -bashlogger -examples% -plugins -vanilla" 2,582 kB
[ebuild     U ] sys-libs/gpm-1.20.5 [1.20.1-r6] USE="(-selinux)" 1,269 kB
[ebuild     U ] sys-apps/less-429 [416] USE="unicode" 492 kB
[ebuild     U ] sys-libs/readline-5.2_p13 [5.2_p7] 2,023 kB
[ebuild  N    ] virtual/pager-0  0 kB
[ebuild     U ] perl-core/Test-Harness-3.10 [2.64] 173 kB
[ebuild     U ] app-admin/perl-cleaner-1.05 [1.04.3] 6 kB
[ebuild     U ] dev-libs/openssl-0.9.8k [0.9.8g-r2] USE="zlib -bindist -gmp -kerberos -sse2 -test" 3,762 kB
[ebuild     U ] sys-apps/busybox-1.13.2 [1.8.2] USE="debug* pam -make-symlinks -savedconfig (-selinux) -static" 1,999 kB
[ebuild  N    ] virtual/acl-0  0 kB
[ebuild     U ] sys-apps/texinfo-4.13 [4.8-r5] USE="nls -static (-build%)" 1,528 kB
[ebuild     U ] sys-devel/flex-2.5.35 [2.5.33-r3] USE="nls -static" 1,228 kB
[ebuild     U ] sys-apps/findutils-4.4.0 [4.3.11] USE="nls (-selinux) -static" 1,983 kB
[ebuild     U ] sys-apps/grep-2.5.4-r1 [2.5.1a-r1] USE="nls pcre (-static%)" 707 kB
[ebuild     U ] app-arch/gzip-1.3.12-r1 [1.3.12] USE="nls -pic -static" 452 kB
[ebuild     U ] sys-apps/gawk-3.1.6 [3.1.5-r5] USE="nls" 1,818 kB
[ebuild     U ] app-arch/tar-1.20 [1.19-r1] USE="nls -static" 1,868 kB
[ebuild     U ] net-misc/wget-1.11.4 [1.10.2] USE="debug* ipv6 nls ssl -static (-build%) (-socks5%)" 933 kB
[ebuild     U ] sys-apps/net-tools-1.60_p20071202044231-r1 [1.60-r13] USE="nls -static" 180 kB
[ebuild     U ] app-editors/nano-2.1.9 [2.0.7] USE="debug* ncurses nls unicode -justify -minimal -slang -spell" 1,450 kB
[ebuild     U ] sys-devel/autoconf-2.63-r1 [2.61-r1] USE="-emacs" 1,527 kB
[ebuild     U ] sys-apps/which-2.19 [2.16] 130 kB
[ebuild  N    ] sys-devel/bc-1.06.95  USE="readline -libedit -static" 284 kB
[ebuild     U ] sys-devel/automake-1.10.2 [1.10.1] 915 kB
[ebuild     U ] sys-devel/binutils-2.18-r3 [2.18-r1] USE="nls -gold% -multislot -multitarget -test -vanilla" 14,629 kB
[ebuild     U ] sys-devel/libtool-1.5.26 [1.5.24] USE="-vanilla" 2,893 kB
[ebuild  NS   ] sys-libs/db-4.6.21_p4 [4.3.29-r2, 4.5.20_p2] USE="-doc -java -nocxx -tcl -test" 11,649 kB
[ebuild     U ] sys-apps/attr-2.4.43 [2.4.39] USE="nls" 115 kB
[ebuild     U ] sys-process/psmisc-22.6 [22.5-r2] USE="X* ipv6 nls (-selinux)" 277 kB
[ebuild     U ] sys-apps/acl-2.2.47 [2.2.45] USE="nls (-nfs)" 152 kB
[ebuild     U ] sys-apps/sed-4.2 [4.1.5] USE="acl%* nls -static" 862 kB
[ebuild     U ] sys-apps/coreutils-7.4 [6.10-r1] USE="acl nls -caps% -gmp% (-selinux) -static -vanilla -xattr" 9,489 kB
[ebuild     U ] net-misc/rsync-3.0.6 [2.6.9-r6] USE="acl iconv%* ipv6 -static -xattr% -xinetd" 761 kB
[ebuild     U ] sys-devel/libperl-5.8.8-r2 [5.8.8-r1] USE="berkdb debug* gdbm -ithreads" 9,887 kB
[ebuild     U ] app-misc/ca-certificates-20080809 [20070303-r1] 148 kB
[ebuild  NS   ] dev-lang/python-2.6.2-r1 [2.4.4-r13, 2.5.4-r3] USE="berkdb gdbm ipv6 ncurses readline ssl threads xml -build -doc -examples -sqlite -tk -ucs2 -wininst" 10,907 kB
[ebuild     U ] sys-libs/cracklib-2.8.13 [2.8.10] USE="nls python" 580 kB
[ebuild     U ] sys-apps/file-4.23 [4.21-r1] USE="python" 551 kB
[ebuild     U ] dev-libs/libxml2-2.7.3-r2 [2.6.30-r1] USE="debug* ipv6 python readline -doc -examples% -test (-bootstrap%) (-build%)" 4,678 kB
[ebuild     U ] sys-apps/shadow-4.1.2.2 [4.0.18.1-r1] USE="cracklib nls pam -audit% (-selinux) -skey (-nousuid%)" 1,658 kB
[ebuild     U ] app-admin/python-updater-0.7 [0.2] 7 kB
[ebuild     U ] net-misc/openssh-5.2_p1-r1 [4.7_p1-r6] USE="X* pam tcpd -X509 -hpn -kerberos -ldap -libedit -pkcs11% (-selinux) -skey -smartcard -static (-chroot%)" 1,060 kB
[ebuild     U ] sys-apps/module-init-tools-3.5 [3.4] USE="-old-linux" 208 kB
[ebuild     U ] sys-fs/udev-141 [115-r1] USE="(-selinux)" 438 kB
[ebuild  NS   ] sys-kernel/gentoo-sources-2.6.30-r5 [2.6.30-r4] USE="-build -symlink" 98 kB
[ebuild  NS   ] sys-devel/gcc-4.3.2-r3 [4.1.2] USE="fortran gtk mudflap nls nptl openmp (-altivec) -bootstrap -build -doc (-fixed-point) -gcj (-hardened) -ip28 -ip32r10k -libffi (-multilib) -multislot (-n32) (-n64) -nocxx -nopie -objc -objc++ -objc-gc -test -vanilla" 57,645 kB
[ebuild     U ] sys-libs/glibc-2.9_p20081201-r2 [2.6.1] USE="debug* nls -gd -glibc-omitfp (-hardened) (-multilib) -profile (-selinux) -vanilla" 16,621 kB
[ebuild  N    ] sys-libs/e2fsprogs-libs-1.41.3-r1  USE="nls" 479 kB
[uninstall    ] sys-libs/com_err-1.40.8  USE="nls" 
[blocks b     ] sys-libs/com_err ("sys-libs/com_err" is blocking sys-libs/e2fsprogs-libs-1.41.3-r1)
[uninstall    ] sys-libs/ss-1.40.8  USE="nls" 
[blocks b     ] sys-libs/ss ("sys-libs/ss" is blocking sys-libs/e2fsprogs-libs-1.41.3-r1)
[ebuild     U ] sys-fs/e2fsprogs-1.41.3-r1 [1.40.8] USE="nls (-static%)" 4,263 kB
[blocks b     ] <sys-fs/e2fsprogs-1.41 ("<sys-fs/e2fsprogs-1.41" is blocking sys-libs/e2fsprogs-libs-1.41.3-r1)
[ebuild     U ] sys-apps/util-linux-2.14.2 [2.13.1.1] USE="crypt nls unicode -loop-aes -old-linux (-selinux) -slang (-uclibc)" 2,888 kB
[ebuild     U ] sys-apps/groff-1.20.1-r1 [1.19.2-r1] USE="X* -examples% (-cjk%)" LINGUAS="-ja%" 3,511 kB
[ebuild     U ] sys-apps/man-1.6f-r3 [1.6e-r3] USE="nls -lzma%" 249 kB
[ebuild  N    ] sys-apps/man-pages-posix-2003a  949 kB
[ebuild     U ] sys-apps/man-pages-3.21 [2.76] USE="nls" LINGUAS="-cs% -da% -de% -es% -fr% -it% -ja% -nl% -pl% -ro% -ru% -zh_CN%" 1,068 kB
[blocks B     ] <sys-apps/man-pages-3 ("<sys-apps/man-pages-3" is blocking sys-apps/man-pages-posix-2003a)

Total: 67 packages (58 upgrades, 5 new, 4 in new slots, 2 uninstalls), Size of downloads: 195,613 kB
Conflict: 4 blocks (1 unsatisfied)

 * Error: The above package list contains packages which cannot be
 * installed at the same time on the same system.

  ('ebuild', '/', 'sys-apps/man-pages-posix-2003a', 'merge') pulled in by
    sys-apps/man-pages-posix required by ('ebuild', '/', 'sys-apps/man-pages-3.21', 'merge')


For more information about Blocked Packages, please refer to the following
section of the Gentoo Linux x86 Handbook (architecture is irrelevant):

http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?full=1#blocked

... end of line:)





_____________________________________________________________
Get your FREE, LinuxWaves.com Email Now! --> http://www.LinuxWaves.com
Join Linux Discussions! --> http://Community.LinuxWaves.com

Re: [gentoo-user] Re: Blocked packages emerging xfce4-meta

[Cinder]

--- alan.mckinnon@gmail.com wrote:

From: Alan McKinnon <alan.mckinnon@gmail.com>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Re: Blocked packages emerging xfce4-meta
Date: Fri, 4 Sep 2009 22:51:02 +0200

On Friday 04 September 2009 16:42:40 Willie Wong wrote:
> On Fri, Sep 04, 2009 at 03:40:48PM +0200, Penguin Lover Alan McKinnon 
squawked:
> > Copy paste from the screen into a mail
> >
> > or try with -pv instead of -av.
> > -a waits for user input and can screw around with STDOUT
> 
> Also, try adding 2>&1 to your redirect to send STDERR to the file too.
> I'm not sure whether it is the case here, but oftentimes error messages
> are not printed on STDOUT.

In this case the poster is talking about emerge's normal output. While this 
may be many things, it will never ever be sent to STDERR so the inclusion of 
2> is certain to change nothing.


-- 
alan dot mckinnon at gmail dot com

----------------------------------------------------------------------------------------------

Thanks for the feedback. 2>&1 was what I needed. I forgot about stderr.
So here's the output of...

Code:
# emerge -pv --update --deep world


These are the packages that would be merged, in order:

Calculating dependencies  ..\b\b... done!
[ebuild     U ] sys-devel/gnuconfig-20080928 [20070724] 41 kB
[ebuild     U ] dev-libs/expat-2.0.1-r2 [2.0.1] 436 kB
[ebuild     U ] dev-libs/gmp-4.2.4 [4.2.2] USE="-nocxx (-doc%)" 1,671 kB
[ebuild     U ] sys-devel/gcc-config-1.4.1 [1.4.0-r4] 0 kB
[ebuild     U ] sys-devel/autoconf-wrapper-6 [4-r3] 0 kB
[ebuild     U ] sys-libs/timezone-data-2009j [2007k] USE="nls" 361 kB
[ebuild     U ] app-arch/bzip2-1.0.5-r1 [1.0.5] USE="-static" 822 kB
[ebuild     U ] app-arch/cpio-2.9-r2 [2.9-r1] USE="nls" 741 kB
[ebuild     U ] sys-kernel/linux-headers-2.6.27-r2 [2.6.23-r3] 3,509 kB
[ebuild     U ] sys-devel/m4-1.4.12 [1.4.11] USE="-examples (-nls%*)" 
751 kB
[ebuild     U ] sys-apps/sandbox-1.6-r2 [1.2.18.1-r2] 300 kB
[ebuild     U ] dev-libs/mpfr-2.4.1_p1 [2.3.0_p4] 883 kB
[ebuild     U ] net-misc/iputils-20071127 [20070202] USE="ipv6 -doc 
-static" 99 kB
[ebuild     U ] app-shells/bash-3.2_p39 [3.2_p17-r1] USE="nls -afs 
-bashlogger -examples% -plugins -vanilla" 2,582 kB
[ebuild     U ] sys-libs/gpm-1.20.5 [1.20.1-r6] USE="(-selinux)" 1,269 
kB
[ebuild     U ] sys-apps/less-429 [416] USE="unicode" 492 kB
[ebuild     U ] sys-libs/readline-5.2_p13 [5.2_p7] 2,023 kB
[ebuild  N    ] virtual/pager-0  0 kB
[ebuild     U ] perl-core/Test-Harness-3.10 [2.64] 173 kB
[ebuild     U ] app-admin/perl-cleaner-1.05 [1.04.3] 6 kB
[ebuild     U ] dev-libs/openssl-0.9.8k [0.9.8g-r2] USE="zlib -bindist 
-gmp -kerberos -sse2 -test" 3,762 kB
[ebuild     U ] sys-apps/busybox-1.13.2 [1.8.2] USE="debug* pam 
-make-symlinks -savedconfig (-selinux) -static" 1,999 kB
[ebuild  N    ] virtual/acl-0  0 kB
[ebuild     U ] sys-apps/texinfo-4.13 [4.8-r5] USE="nls -static 
(-build%)" 1,528 kB
[ebuild     U ] sys-devel/flex-2.5.35 [2.5.33-r3] USE="nls -static" 
1,228 kB
[ebuild     U ] sys-apps/findutils-4.4.0 [4.3.11] USE="nls (-selinux) 
-static" 1,983 kB
[ebuild     U ] sys-apps/grep-2.5.4-r1 [2.5.1a-r1] USE="nls pcre 
(-static%)" 707 kB
[ebuild     U ] app-arch/gzip-1.3.12-r1 [1.3.12] USE="nls -pic -static" 
452 kB
[ebuild     U ] sys-apps/gawk-3.1.6 [3.1.5-r5] USE="nls" 1,818 kB
[ebuild     U ] app-arch/tar-1.20 [1.19-r1] USE="nls -static" 1,868 kB
[ebuild     U ] net-misc/wget-1.11.4 [1.10.2] USE="debug* ipv6 nls ssl 
-static (-build%) (-socks5%)" 933 kB
[ebuild     U ] sys-apps/net-tools-1.60_p20071202044231-r1 [1.60-r13] 
USE="nls -static" 180 kB
[ebuild     U ] app-editors/nano-2.1.9 [2.0.7] USE="debug* ncurses nls 
unicode -justify -minimal -slang -spell" 1,450 kB
[ebuild     U ] sys-devel/autoconf-2.63-r1 [2.61-r1] USE="-emacs" 1,527 
kB
[ebuild     U ] sys-apps/which-2.19 [2.16] 130 kB
[ebuild  N    ] sys-devel/bc-1.06.95  USE="readline -libedit -static" 
284 kB
[ebuild     U ] sys-devel/automake-1.10.2 [1.10.1] 915 kB
[ebuild     U ] sys-devel/binutils-2.18-r3 [2.18-r1] USE="nls -gold% 
-multislot -multitarget -test -vanilla" 14,629 kB
[ebuild     U ] sys-devel/libtool-1.5.26 [1.5.24] USE="-vanilla" 2,893 
kB
[ebuild  NS   ] sys-libs/db-4.6.21_p4 [4.3.29-r2, 4.5.20_p2] USE="-doc 
-java -nocxx -tcl -test" 11,649 kB
[ebuild     U ] sys-apps/attr-2.4.43 [2.4.39] USE="nls" 115 kB
[ebuild     U ] sys-process/psmisc-22.6 [22.5-r2] USE="X* ipv6 nls 
(-selinux)" 277 kB
[ebuild     U ] sys-apps/acl-2.2.47 [2.2.45] USE="nls (-nfs)" 152 kB
[ebuild     U ] sys-apps/sed-4.2 [4.1.5] USE="acl%* nls -static" 862 kB
[ebuild     U ] sys-apps/coreutils-7.4 [6.10-r1] USE="acl nls -caps% 
-gmp% (-selinux) -static -vanilla -xattr" 9,489 kB
[ebuild     U ] net-misc/rsync-3.0.6 [2.6.9-r6] USE="acl iconv%* ipv6 
-static -xattr% -xinetd" 761 kB
[ebuild     U ] sys-devel/libperl-5.8.8-r2 [5.8.8-r1] USE="berkdb debug* 
gdbm -ithreads" 9,887 kB
[ebuild     U ] app-misc/ca-certificates-20080809 [20070303-r1] 148 kB
[ebuild  NS   ] dev-lang/python-2.6.2-r1 [2.4.4-r13, 2.5.4-r3] 
USE="berkdb gdbm ipv6 ncurses readline ssl threads xml -build -doc 
-examples -sqlite -tk -ucs2 -wininst" 10,907 kB
[ebuild     U ] sys-libs/cracklib-2.8.13 [2.8.10] USE="nls python" 580 
kB
[ebuild     U ] sys-apps/file-4.23 [4.21-r1] USE="python" 551 kB
[ebuild     U ] dev-libs/libxml2-2.7.3-r2 [2.6.30-r1] USE="debug* ipv6 
python readline -doc -examples% -test (-bootstrap%) (-build%)" 4,678 kB
[ebuild     U ] sys-apps/shadow-4.1.2.2 [4.0.18.1-r1] USE="cracklib nls 
pam -audit% (-selinux) -skey (-nousuid%)" 1,658 kB
[ebuild     U ] app-admin/python-updater-0.7 [0.2] 7 kB
[ebuild     U ] net-misc/openssh-5.2_p1-r1 [4.7_p1-r6] USE="X* pam tcpd 
-X509 -hpn -kerberos -ldap -libedit -pkcs11% (-selinux) -skey -smartcard 
-static (-chroot%)" 1,060 kB
[ebuild     U ] sys-apps/module-init-tools-3.5 [3.4] USE="-old-linux" 
208 kB
[ebuild     U ] sys-fs/udev-141 [115-r1] USE="(-selinux)" 438 kB
[ebuild  NS   ] sys-kernel/gentoo-sources-2.6.30-r5 [2.6.30-r4] 
USE="-build -symlink" 98 kB
[ebuild  NS   ] sys-devel/gcc-4.3.2-r3 [4.1.2] USE="fortran gtk mudflap 
nls nptl openmp (-altivec) -bootstrap -build -doc (-fixed-point) -gcj 
(-hardened) -ip28 -ip32r10k -libffi (-multilib) -multislot (-n32) (-n64) 
-nocxx -nopie -objc -objc++ -objc-gc -test -vanilla" 57,645 kB
[ebuild     U ] sys-libs/glibc-2.9_p20081201-r2 [2.6.1] USE="debug* nls 
-gd -glibc-omitfp (-hardened) (-multilib) -profile (-selinux) -vanilla" 
16,621 kB
[ebuild  N    ] sys-libs/e2fsprogs-libs-1.41.3-r1  USE="nls" 479 kB
[uninstall    ] sys-libs/com_err-1.40.8  USE="nls" 
[blocks b     ] sys-libs/com_err ("sys-libs/com_err" is blocking 
sys-libs/e2fsprogs-libs-1.41.3-r1)
[uninstall    ] sys-libs/ss-1.40.8  USE="nls" 
[blocks b     ] sys-libs/ss ("sys-libs/ss" is blocking 
sys-libs/e2fsprogs-libs-1.41.3-r1)
[ebuild     U ] sys-fs/e2fsprogs-1.41.3-r1 [1.40.8] USE="nls (-static%)" 
4,263 kB
[blocks b     ] <sys-fs/e2fsprogs-1.41 ("<sys-fs/e2fsprogs-1.41" is 
blocking sys-libs/e2fsprogs-libs-1.41.3-r1)
[ebuild     U ] sys-apps/util-linux-2.14.2 [2.13.1.1] USE="crypt nls 
unicode -loop-aes -old-linux (-selinux) -slang (-uclibc)" 2,888 kB
[ebuild     U ] sys-apps/groff-1.20.1-r1 [1.19.2-r1] USE="X* -examples% 
(-cjk%)" LINGUAS="-ja%" 3,511 kB
[ebuild     U ] sys-apps/man-1.6f-r3 [1.6e-r3] USE="nls -lzma%" 249 kB
[ebuild  N    ] sys-apps/man-pages-posix-2003a  949 kB
[ebuild     U ] sys-apps/man-pages-3.21 [2.76] USE="nls" LINGUAS="-cs% 
-da% -de% -es% -fr% -it% -ja% -nl% -pl% -ro% -ru% -zh_CN%" 1,068 kB
[blocks B     ] <sys-apps/man-pages-3 ("<sys-apps/man-pages-3" is 
blocking sys-apps/man-pages-posix-2003a)

Total: 67 packages (58 upgrades, 5 new, 4 in new slots, 2 uninstalls), 
Size of downloads: 195,613 kB
Conflict: 4 blocks (1 unsatisfied)

 * Error: The above package list contains packages which cannot be
 * installed at the same time on the same system.

  ('ebuild', '/', 'sys-apps/man-pages-posix-2003a', 'merge') pulled in 
by
    sys-apps/man-pages-posix required by ('ebuild', '/', 
'sys-apps/man-pages-3.21', 'merge')


For more information about Blocked Packages, please refer to the 
following
section of the Gentoo Linux x86 Handbook (architecture is irrelevant):

http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?full=1#blocked

... end of line:)


P.S. Sorry for making a mess of this thread. I don't don't know what's going with these e-mails:/



_____________________________________________________________
Get your FREE, LinuxWaves.com Email Now! --> http://www.LinuxWaves.com
Join Linux Discussions! --> http://Community.LinuxWaves.com

[gentoo-user] Re: Blocked packages emerging xfce4-meta

[Cinder]

I'm sorry! Please forgive me. I don't why these messages are comming up blank. 
Just to recap. I've installed Gentoo for the first time. Emerged vim, links, and xorg-server.
Trying to emerge xfce4-meta...

Code:
# emerge -pv --update --deep world
output > http://pastebin.com/m5ef78564

Thank you all for your guidance. Your too kind.

_____________________________________________________________
Get your FREE, LinuxWaves.com Email Now! --> http://www.LinuxWaves.com
Join Linux Discussions! --> http://Community.LinuxWaves.com

Re: [gentoo-user] Re: Blocked packages emerging xfce4-meta

[Boris Fersing]

On Sat, Sep 5, 2009 at 10:31, Cinder<cinder@linuxwaves.com> wrote:
> I'm sorry! Please forgive me. I don't why these messages are comming up blank.
> Just to recap. I've installed Gentoo for the first time. Emerged vim, links, and xorg-server.
> Trying to emerge xfce4-meta...
>
> Code:
> # emerge -pv --update --deep world
> output > http://pastebin.com/m5ef78564
>
Hi,

Try : emerge -aC "<sys-apps/man-pages-3"

Boris

> Thank you all for your guidance. Your too kind.
>
> _____________________________________________________________
> Get your FREE, LinuxWaves.com Email Now! --> http://www.LinuxWaves.com
> Join Linux Discussions! --> http://Community.LinuxWaves.com
>
>



-- 
42

Re: [gentoo-user] Re: Blocked packages emerging xfce4-meta

[David]

Cinder wrote:
> I'm sorry! Please forgive me. I don't why these messages are comming up blank. 
> Just to recap. I've installed Gentoo for the first time. Emerged vim, links, and xorg-server.
> Trying to emerge xfce4-meta...
> 
> Code:
> # emerge -pv --update --deep world
> output > http://pastebin.com/m5ef78564
> 
> Thank you all for your guidance. Your too kind.
> 
> _____________________________________________________________
> Get your FREE, LinuxWaves.com Email Now! --> http://www.LinuxWaves.com
> Join Linux Discussions! --> http://Community.LinuxWaves.com
> 
> 
This should help;
http://forums.gentoo.org/viewtopic-t-759059-highlight-sysapps+manpagesposix.html

-- 
Powered by Gentoo GNU/Linux
http://linuxcrazy.com

Re: [gentoo-user] Re: Blocked packages emerging xfce4-meta

[Willie Wong]

On Fri, Sep 04, 2009 at 10:53:00PM -0700, Penguin Lover Cinder Cinder squawked:
> [ebuild     U ] sys-apps/man-1.6f-r3 [1.6e-r3] USE="nls -lzma%" 249 kB
> [ebuild  N    ] sys-apps/man-pages-posix-2003a  949 kB
> [ebuild     U ] sys-apps/man-pages-3.21 [2.76] USE="nls" LINGUAS="-cs% -da% -de% -es% -fr% -it% -ja% -nl% -pl% -ro% -ru% -zh_CN%" 1,068 kB
> [blocks B     ] <sys-apps/man-pages-3 ("<sys-apps/man-pages-3" is blocking sys-apps/man-pages-posix-2003a)
> 
> Total: 67 packages (58 upgrades, 5 new, 4 in new slots, 2 uninstalls), Size of downloads: 195,613 kB
> Conflict: 4 blocks (1 unsatisfied)
> 
>  * Error: The above package list contains packages which cannot be
>  * installed at the same time on the same system.
> 
>   ('ebuild', '/', 'sys-apps/man-pages-posix-2003a', 'merge') pulled in by
>     sys-apps/man-pages-posix required by ('ebuild', '/', 'sys-apps/man-pages-3.21', 'merge')
> 

Try unmerging man-pages first, and then re-emerging it. Even though
it is in system, it probably won't break anything. :)

Looks like for the man-pages-3 and above, the ebuild now just is a
meta that chooses what to install based on your LINGUAS. So if you
want man in other languages besides English, besure to set your
LINGUAS. 

Best of luck, 

W

-- 
In "Bailliere's Comprehensive Veterinary Dictionary" by D.C. Blood and Viedens 
bowyrginia Studdert, the following entry appears on page 133, right between
Brunner's Glands and Brush Border:

"Brunus Edwardii: the urban, companion animal bear, much admired for its
low food requirements and excellent house training, a high emotional output
and complete freedom from disease.  Called also Ursus Theodorus (USA) and
Pooh, Paddington or Brideshead Bear (UK)."

(I could add that they may be free from disease, but they do seem
to be susceptible to lacerations requiring surgical repair...)
Sortir en Pantoufles: up 1002 days, 12:24

Re: [gentoo-user] Re: Blocked packages emerging xfce4-meta

[Willie Wong]

On Sat, Sep 05, 2009 at 01:31:21AM -0700, Penguin Lover Cinder squawked:
> I'm sorry! Please forgive me. I don't why these messages are comming up blank. 

I've been getting your messages just fine. Are you sure the problem
isn't on the receiving end over there?

Best, 

W
-- 
"He expanded his chest to make it totally clear that here 
was the sort of man you only dared to cross if you had a 
team of Sherpas with you. "
Sortir en Pantoufles: up 1002 days, 12:29