Re: [gentoo-user] radeon and radeonfb both loaded

[Mick <michaelkintzios@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 1644 bytes --]

On Tuesday 21 July 2009, Mark Knecht wrote:
> On Tue, Jul 21, 2009 at 10:56 AM, Mick<michaelkintzios@gmail.com> wrote:

> > roughly is equivalent to 1210x907 pixels.  Run 'xdpyinfo -display :0.0'
> > to see the dimensions in rounded numbers.

> OK, there is possibly a little extra difficulty to get this run, but
> it's likely just ssh stuff or possibly not enabling something in X11.
>
> 1) I first ssh into my dad's Gentoo machine. When I try to run the
> command through the ssh tunnel I get this:
>
> gandalf ~ # xdpyinfo -display :0.0
> Xlib: connection to ":0.0" refused by server
> Xlib: Protocol not supported by server
>
> xdpyinfo:  unable to open display ":0.0".
> gandalf ~ #
>
> I then ssh into my mom's Gentoo machine
>
> gandalf ~ # !ssh
> ssh DesertFlower
> Password:
> Last login: Mon Jul 20 19:29:10 PDT 2009 from gandalf on pts/0
> DesertFlower ~ # xdpyinfo -display :0.0
> Xlib: connection to ":0.0" refused by server
> Xlib: No protocol specified
>
> xdpyinfo:  unable to open display ":0.0".
> DesertFlower ~ #
>
> Right now no one is logged into either machine. Both are presumably
> sitting with gdm login screens.

Hmm, it could be an ssh thing, not sure, probably an xauth thing (have a look 
at man xauth).  See if setting your IP address allows to access your parents 
machine: 

xdpyinfo -display XXX.XXX.XX.XX:0.0  <--where XXX.XXX.XX.XX is your IP address

of try to set the relevant env variable: setenv DISPLAY XXX.XXX.XXX.XXX:0 at 
your client machine first.

Alternatively, ask them to login and then use the same login credentials.

HTH.
-- 
Regards,
Mick

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]