[gentoo-user] revdep-rebuild quits at 21%

[gentoo-user] revdep-rebuild quits at 21%

[Joseph]

I upgraded to gcc-4.3.2-r3 rebuild system, world.  The only package that did not compile was g-wrap.
However, when I run "revdep-rebuild" it quits at 21%
Does anybody know how to fix it?

I tried recompiling gentoolkit; did not help.

-- 
Joseph

Re: [gentoo-user] revdep-rebuild quits at 21%

[Alan McKinnon]

On Monday 06 April 2009 04:13:07 Joseph wrote:
> I upgraded to gcc-4.3.2-r3 rebuild system, world.  The only package that
> did not compile was g-wrap. However, when I run "revdep-rebuild" it quits
> at 21%
> Does anybody know how to fix it?
>
> I tried recompiling gentoolkit; did not help.

Error messages?
Logs?
Console output?

Your question cannot be answered as all we know is that it "failed". 21% is 
also meaningless - that just says revdep-rebuild was doing it's main thing and 
stopped.

-- 
alan dot mckinnon at gmail dot com

Re: [gentoo-user] revdep-rebuild quits at 21%

[Joseph]

On 04/06/09 21:20, Alan McKinnon wrote:
>On Monday 06 April 2009 04:13:07 Joseph wrote:
>> I upgraded to gcc-4.3.2-r3 rebuild system, world.  The only package that
>> did not compile was g-wrap. However, when I run "revdep-rebuild" it quits
>> at 21%
>> Does anybody know how to fix it?
>>
>> I tried recompiling gentoolkit; did not help.
>
>Error messages?
>Logs?
>Console output?
>
>Your question cannot be answered as all we know is that it "failed". 21% is 
>also meaningless - that just says revdep-rebuild was doing it's main thing and 
>stopped.

I wish I could provide more information, the cursor just seats there, there is no error messages at the console.
Which log " revdep-rebuild" writes to?

I'm rebuilding the system with the old CFLAGS so I'll have more information tomorrow.
I used -march=native but I think my AMD64 didn't like it :-/

-- 
Joseph

Re: [gentoo-user] revdep-rebuild quits at 21%

[Alan McKinnon]

On Tuesday 07 April 2009 00:22:49 Joseph wrote:
> On 04/06/09 21:20, Alan McKinnon wrote:
> >On Monday 06 April 2009 04:13:07 Joseph wrote:
> >> I upgraded to gcc-4.3.2-r3 rebuild system, world.  The only package that
> >> did not compile was g-wrap. However, when I run "revdep-rebuild" it
> >> quits at 21%
> >> Does anybody know how to fix it?
> >>
> >> I tried recompiling gentoolkit; did not help.
> >
> >Error messages?
> >Logs?
> >Console output?
> >
> >Your question cannot be answered as all we know is that it "failed". 21%
> > is also meaningless - that just says revdep-rebuild was doing it's main
> > thing and stopped.
>
> I wish I could provide more information, the cursor just seats there, there
> is no error messages at the console. Which log " revdep-rebuild" writes to?
>
> I'm rebuilding the system with the old CFLAGS so I'll have more information
> tomorrow. I used -march=native but I think my AMD64 didn't like it :-/

It's possible that gcc got confused as to what cpu you have an it's abilities. 
If you still don't know what CFLAGS to use, post your /proc/cpuinfo here and 
someone is bound to know what works well.

-- 
alan dot mckinnon at gmail dot com

Re: [gentoo-user] revdep-rebuild quits at 21%

[Jorge Morais]

On Tue, 7 Apr 2009 09:12:30 +0200
Alan McKinnon <alan.mckinnon@gmail.com> wrote:

> > I wish I could provide more information, the cursor just seats there, there
> > is no error messages at the console. Which log " revdep-rebuild" writes to?
> >
> > I'm rebuilding the system with the old CFLAGS so I'll have more information
> > tomorrow. I used -march=native but I think my AMD64 didn't like it :-/
> 
> It's possible that gcc got confused as to what cpu you have an it's abilities. 
> If you still don't know what CFLAGS to use, post your /proc/cpuinfo here and 
> someone is bound to know what works well.
> 
Alan, he already sent an email in another thread with his cpuinfo. Please
see the thread with subject "GCC-4.3.2" and see if you can help him.

Regards,
    Jorge

-- 
Software is like sex: it is better when it is free. --Linus Torvalds

Re: [gentoo-user] revdep-rebuild quits at 21%

[Joseph]

On 04/07/09 09:12, Alan McKinnon wrote:
>On Tuesday 07 April 2009 00:22:49 Joseph wrote:
>> On 04/06/09 21:20, Alan McKinnon wrote:
>> >On Monday 06 April 2009 04:13:07 Joseph wrote:
>> >> I upgraded to gcc-4.3.2-r3 rebuild system, world.  The only package that
>> >> did not compile was g-wrap. However, when I run "revdep-rebuild" it
>> >> quits at 21%
>> >> Does anybody know how to fix it?
>> >>
>> >> I tried recompiling gentoolkit; did not help.
>> >
>> >Error messages?
>> >Logs?
>> >Console output?
>> >
>> >Your question cannot be answered as all we know is that it "failed". 21%
>> > is also meaningless - that just says revdep-rebuild was doing it's main
>> > thing and stopped.
>>
>> I wish I could provide more information, the cursor just seats there, there
>> is no error messages at the console. Which log " revdep-rebuild" writes to?
>>
>> I'm rebuilding the system with the old CFLAGS so I'll have more information
>> tomorrow. I used -march=native but I think my AMD64 didn't like it :-/
>
>It's possible that gcc got confused as to what cpu you have an it's abilities. 
>If you still don't know what CFLAGS to use, post your /proc/cpuinfo here and 
>someone is bound to know what works well.
>

Here is my cpuinfo;
cat /proc/cpuinfo
processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 47
model name      : AMD Athlon(tm) 64 Processor 3000+
stepping        : 0
cpu MHz         : 1802.243
cache size      : 512 KB
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm
3dnowext 3dnow up rep_good nopl pni
bogomips        : 3604.48
TLB size        : 1024 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc

I'm runing 64-bit so in my case I think it will be Athlon not Sempron:

Are the setting below correct?
CHOST="x86_64-pc-linux-gnu"
CFLAGS="-march=k8 -O2 -pipe"

-- 
Joseph

Re: [gentoo-user] revdep-rebuild quits at 21%

[Paul Hartman]

On Tue, Apr 7, 2009 at 9:12 AM, Joseph <syscon780@gmail.com> wrote:
> On 04/07/09 09:12, Alan McKinnon wrote:
>>
>> On Tuesday 07 April 2009 00:22:49 Joseph wrote:
>>>
>>> On 04/06/09 21:20, Alan McKinnon wrote:
>>> >On Monday 06 April 2009 04:13:07 Joseph wrote:
>>> >> I upgraded to gcc-4.3.2-r3 rebuild system, world.  The only package
>>> >> that
>>> >> did not compile was g-wrap. However, when I run "revdep-rebuild" it
>>> >> quits at 21%
>>> >> Does anybody know how to fix it?
>>> >>
>>> >> I tried recompiling gentoolkit; did not help.
>>> >
>>> >Error messages?
>>> >Logs?
>>> >Console output?
>>> >
>>> >Your question cannot be answered as all we know is that it "failed". 21%
>>> > is also meaningless - that just says revdep-rebuild was doing it's main
>>> > thing and stopped.
>>>
>>> I wish I could provide more information, the cursor just seats there,
>>> there
>>> is no error messages at the console. Which log " revdep-rebuild" writes
>>> to?
>>>
>>> I'm rebuilding the system with the old CFLAGS so I'll have more
>>> information
>>> tomorrow. I used -march=native but I think my AMD64 didn't like it :-/
>>
>> It's possible that gcc got confused as to what cpu you have an it's
>> abilities. If you still don't know what CFLAGS to use, post your
>> /proc/cpuinfo here and someone is bound to know what works well.
>>
>
> Here is my cpuinfo;
> cat /proc/cpuinfo
> processor       : 0
> vendor_id       : AuthenticAMD
> cpu family      : 15
> model           : 47
> model name      : AMD Athlon(tm) 64 Processor 3000+
> stepping        : 0
> cpu MHz         : 1802.243
> cache size      : 512 KB
> fpu             : yes
> fpu_exception   : yes
> cpuid level     : 1
> wp              : yes
> flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
> cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm
> 3dnowext 3dnow up rep_good nopl pni
> bogomips        : 3604.48
> TLB size        : 1024 4K pages
> clflush size    : 64
> cache_alignment : 64
> address sizes   : 40 bits physical, 48 bits virtual
> power management: ts fid vid ttp tm stc
>
> I'm runing 64-bit so in my case I think it will be Athlon not Sempron:
>
> Are the setting below correct?
> CHOST="x86_64-pc-linux-gnu"
> CFLAGS="-march=k8 -O2 -pipe"

I have the same CPU and i use -march=athlon64 but I think this is
equivalent to k8 by reading the GCC docs. So I think it looks good.

Re: [gentoo-user] revdep-rebuild quits at 21%

[Joseph]

On 04/07/09 09:29, Paul Hartman wrote:
>> Here is my cpuinfo;
>> cat /proc/cpuinfo
>> processor       : 0
>> vendor_id       : AuthenticAMD
>> cpu family      : 15
>> model           : 47
>> model name      : AMD Athlon(tm) 64 Processor 3000+
>> stepping        : 0
>> cpu MHz         : 1802.243
>> cache size      : 512 KB
>> fpu             : yes
>> fpu_exception   : yes
>> cpuid level     : 1
>> wp              : yes
>> flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
>> cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm
>> 3dnowext 3dnow up rep_good nopl pni
>> bogomips        : 3604.48
>> TLB size        : 1024 4K pages
>> clflush size    : 64
>> cache_alignment : 64
>> address sizes   : 40 bits physical, 48 bits virtual
>> power management: ts fid vid ttp tm stc
>>
>> I'm runing 64-bit so in my case I think it will be Athlon not Sempron:
>>
>> Are the setting below correct?
>> CHOST="x86_64-pc-linux-gnu"
>> CFLAGS="-march=k8 -O2 -pipe"
>
>I have the same CPU and i use -march=athlon64 but I think this is
>equivalent to k8 by reading the GCC docs. So I think it looks good.

Did you recomple system and word after switching to new gcc?

-- 
Joseph