* [gentoo-user] ipw3945 and wpa_supplicant issues
@ 2007-04-10 15:09 José Pedro Saraiva
2007-04-26 0:11 ` José Pedro Saraiva
0 siblings, 1 reply; 9+ messages in thread
From: José Pedro Saraiva @ 2007-04-10 15:09 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 3743 bytes --]
Hi all!
I own a Toshiba laptop P100-400 with a Intel PRO/Wireless 3945ABG wireless
adapter.
I've managed to get it working with normal WEP authentication, but no
success with wpa_supplicant (and I really need it for WPA auth).
# /etc/init.d/net.eth1 restart
* Stopping eth1
* Bringing down eth1
* Stopping dhcpcd on eth1
...
[ ok ]
* Shutting down eth1
...
[ ok ]
* Stopping wpa_cli on eth1
...
[ ok ]
* Stopping wpa_supplicant on eth1
...
[ ok ]
* Starting eth1
* Starting wpa_supplicant on eth1 ...
ioctl[SIOCSIWMODE]: Resource temporarily unavailable
Could not configure driver to use managed mode
ioctl[SIOCGIWRANGE]: Resource temporarily unavailable
ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Resource temporarily
unavailable
ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Resource temporarily
unavailable
[ ok ]th param 5 value 0x1 -
* Starting wpa_cli on eth1
...
[ ok ]
* Failed to configure eth1 in the background
Ugly, uh? :/
dmesg output:
ipw3945: Error sending LEDS_CMD: time out after 500ms.
ipw3945: Error sending LEDS_CMD: time out after 500ms.
ipw3945: Error sending LEDS_CMD: time out after 500ms.
ipw3945: request scan called when driver not ready.
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Error sending SCAN_ABORT_CMD: time out after 500ms.
ipw3945: Error sending LEDS_CMD: time out after 500ms.
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
Some extra info:
I'm using the internal ieee8021x stack with gentoo-sources-2.6.19-r5
* net-wireless/ipw3945
Latest version available: 1.2.0
Latest version installed: 1.2.0
* net-wireless/ipw3945-ucode
Latest version available: 1.14.2
Latest version installed: 1.14.2
* net-wireless/ipw3945d
Latest version available: 1.7.22-r4
Latest version installed: 1.7.22-r4
* net-wireless/wpa_supplicant
Latest version available: 0.5.7
Latest version installed: 0.5.7
# lspci | grep "Wireless"
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network
Connection (rev 02)
# pcitweak -l 2>&1 | grep "03.00.0:"
PCI: 03:00:0: chip 8086,4222 card 8086,1041 rev 02 class 02,80,00 hdr 00
# iwconfig eth1
eth1 unassociated ESSID:off/any
Mode:Managed Frequency=2.462 GHz Access Point: Not-Associated
Bit Rate:0 kb/s Tx-Power:16 dBm
Retry limit:15 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:179 Missed beacon:0
/etc/conf.d/net extract:
modules_eth1=( "!plug" "wpa_supplicant" )
wpa_supplicant_eth1="-Dwext"
associate_timeout_eth1="60"
/etc/wpa_supplicant/wpa_supplicant.conf extract (the problem isn't here
though, it fails with all types of configurations):
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
update_config=0
eapol_version=1
ap_scan=0
fast_reauth=1
network={
ssid="XXXXXXXXXX"
priority=1
key_mgmt=NONE
auth_alg=SHARED
wep_key0="XXXXXXX"
wep_tx_keyidx=0
}
Sorry for the length.
Any help would be greatly appreciated
.
Best regards,
José Pedro
[-- Attachment #2: Type: text/html, Size: 10300 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread* [gentoo-user] ipw3945 and wpa_supplicant issues
2007-04-10 15:09 [gentoo-user] ipw3945 and wpa_supplicant issues José Pedro Saraiva
@ 2007-04-26 0:11 ` José Pedro Saraiva
2007-04-26 10:03 ` Christian
2007-04-27 3:35 ` [gentoo-user] " Will Briggs
0 siblings, 2 replies; 9+ messages in thread
From: José Pedro Saraiva @ 2007-04-26 0:11 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 3745 bytes --]
Hi all!
I own a Toshiba laptop P100-400 with a Intel PRO/Wireless 3945ABG wireless
adapter.
I've managed to get it working with normal WEP authentication, but no
success with wpa_supplicant (and I really need it for WPA auth).
# /etc/init.d/net.eth1 restart
* Stopping eth1
* Bringing down eth1
* Stopping dhcpcd on eth1
...
[ ok ]
* Shutting down eth1
...
[ ok ]
* Stopping wpa_cli on eth1
...
[ ok ]
* Stopping wpa_supplicant on eth1
...
[ ok ]
* Starting eth1
* Starting wpa_supplicant on eth1 ...
ioctl[SIOCSIWMODE]: Resource temporarily unavailable
Could not configure driver to use managed mode
ioctl[SIOCGIWRANGE]: Resource temporarily unavailable
ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Resource temporarily
unavailable
ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Resource temporarily
unavailable
[ ok ]th param 5 value 0x1 -
* Starting wpa_cli on eth1
...
[ ok ]
* Failed to configure eth1 in the background
Ugly, uh? :/
dmesg output:
ipw3945: Error sending LEDS_CMD: time out after 500ms.
ipw3945: Error sending LEDS_CMD: time out after 500ms.
ipw3945: Error sending LEDS_CMD: time out after 500ms.
ipw3945: request scan called when driver not ready.
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Error sending SCAN_ABORT_CMD: time out after 500ms.
ipw3945: Error sending LEDS_CMD: time out after 500ms.
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
Some extra info:
I'm using the internal ieee8021x stack with gentoo-sources-2.6.19-r5
* net-wireless/ipw3945
Latest version available: 1.2.0
Latest version installed: 1.2.0
* net-wireless/ipw3945-ucode
Latest version available: 1.14.2
Latest version installed: 1.14.2
* net-wireless/ipw3945d
Latest version available: 1.7.22-r4
Latest version installed: 1.7.22-r4
* net-wireless/wpa_supplicant
Latest version available: 0.5.7
Latest version installed: 0.5.7
# lspci | grep "Wireless"
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network
Connection (rev 02)
# pcitweak -l 2>&1 | grep " 03.00.0:"
PCI: 03:00:0: chip 8086,4222 card 8086,1041 rev 02 class 02,80,00 hdr 00
# iwconfig eth1
eth1 unassociated ESSID:off/any
Mode:Managed Frequency= 2.462 GHz Access Point: Not-Associated
Bit Rate:0 kb/s Tx-Power:16 dBm
Retry limit:15 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:179 Missed beacon:0
/etc/conf.d/net extract:
modules_eth1=( "!plug" "wpa_supplicant" )
wpa_supplicant_eth1="-Dwext"
associate_timeout_eth1="60"
/etc/wpa_supplicant/wpa_supplicant.conf extract (the problem isn't here
though, it fails with all types of configurations):
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
update_config=0
eapol_version=1
ap_scan=0
fast_reauth=1
network={
ssid="XXXXXXXXXX"
priority=1
key_mgmt=NONE
auth_alg=SHARED
wep_key0="XXXXXXX"
wep_tx_keyidx=0
}
Sorry for the length.
Any help would be greatly appreciated.
Best regards,
José Pedro
[-- Attachment #2: Type: text/html, Size: 10365 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [gentoo-user] ipw3945 and wpa_supplicant issues
2007-04-26 0:11 ` José Pedro Saraiva
@ 2007-04-26 10:03 ` Christian
2007-04-26 10:15 ` [gentoo-user] " Alexander Skwar
2007-04-27 3:35 ` [gentoo-user] " Will Briggs
1 sibling, 1 reply; 9+ messages in thread
From: Christian @ 2007-04-26 10:03 UTC (permalink / raw
To: gentoo-user
Am Donnerstag, 26. April 2007 02:11 schrieb José Pedro Saraiva:
> Hi all!
>
> I own a Toshiba laptop P100-400 with a Intel PRO/Wireless 3945ABG wireless
> adapter.
> I've managed to get it working with normal WEP authentication, but no
> success with wpa_supplicant (and I really need it for WPA auth).
>
> I'm using the internal ieee8021x stack with gentoo-sources-2.6.19-r5
I also, but now with 2.6.20-r6 (2.6.19-r5 works also fine for me)
>
> * net-wireless/ipw3945
> Latest version available: 1.2.0
> Latest version installed: 1.2.0
>
> * net-wireless/ipw3945-ucode
> Latest version available: 1.14.2
> Latest version installed: 1.14.2
>
> * net-wireless/ipw3945d
> Latest version available: 1.7.22-r4
> Latest version installed: 1.7.22-r4
>
> * net-wireless/wpa_supplicant
> Latest version available: 0.5.7
> Latest version installed: 0.5.7
>
I use the same versions.
> /etc/conf.d/net extract:
>
> modules_eth1=( "!plug" "wpa_supplicant" )
> wpa_supplicant_eth1="-Dwext"
> associate_timeout_eth1="60"
This is my configuration in net.
modules=( "wpa_supplicant" )
wpa_supplicant_eth1="-D wext"
wpa_timeout_eth1=60
config_eth1=( "dhcp" )
dhcpcd_eth1="-t 5"
I don't know what "!plug" does.
>
>
> /etc/wpa_supplicant/wpa_supplicant.conf extract (the problem isn't here
> though, it fails with all types of configurations):
my /etc/wpa_supplicant/wpa_supplicant.conf:
ctrl_interface=/var/run/wpa_supplicant
ap_scan=1
network={
ssid="xxxxxxxxx"
psk="xxxxxxxx"
priority=5
}
I use wpa-psk to make my wlan secure.
I hope I this can help you.
Best regards
Christian
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [gentoo-user] ipw3945 and wpa_supplicant issues
2007-04-26 0:11 ` José Pedro Saraiva
2007-04-26 10:03 ` Christian
@ 2007-04-27 3:35 ` Will Briggs
2007-05-16 19:29 ` Brian Johnson
1 sibling, 1 reply; 9+ messages in thread
From: Will Briggs @ 2007-04-27 3:35 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/html, Size: 5007 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gentoo-user] ipw3945 and wpa_supplicant issues
2007-04-27 3:35 ` [gentoo-user] " Will Briggs
@ 2007-05-16 19:29 ` Brian Johnson
2007-05-16 21:06 ` Dan Farrell
0 siblings, 1 reply; 9+ messages in thread
From: Brian Johnson @ 2007-05-16 19:29 UTC (permalink / raw
To: gentoo-user
Actually, Will you are a bit wrong. Restarting the ipw3945d service yields
the same results. Here's what happens when I restart the ipw3945 service:
# /etc/init.d/ipw3945d restart
* Stopping eth1
* Bringing down eth1
* Stopping dhcpcd on eth1 ...
[ ok ]
* Shutting down eth1 ...
[ ok ]
* Stopping wpa_cli on eth1 ...
[ ok ]
* Stopping wpa_supplicant on eth1 ...
[ ok ]
* Stopping ipw3945d ...
[ ok ]
* Starting ipw3945d ...
[ ok ]
* Starting eth1
* Starting wpa_supplicant on eth1 ...
ioctl[SIOCSIWMODE]: Resource temporarily unavailable
Could not configure driver to use managed mode
ioctl[SIOCGIWRANGE]: Resource temporarily unavailable
ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Resource
temporarily unavailable
ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Resource temporarily
unavailable
[ ok ]th param 5 value 0x1 -
* Starting wpa_cli on eth1 ...
[ ok ]
* Backgrounding ...
Which is basically the same problem as what José posted about, except he
is restarting net.eth1.
Anyone know of a solution to fix this? (Aside from getting a different
wireless NIC)
* net-wireless/ipw3945
Latest version available: 1.2.0
Latest version installed: 1.2.0
* net-wireless/ipw3945-ucode
Latest version available: 1.14.2
Latest version installed: 1.14.2
* net-wireless/ipw3945d
Latest version available: 1.7.22-r4
Latest version installed: 1.7.22-r4
- Brian
On Thu, April 26, 2007 8:35 pm, Will Briggs wrote:
> � wrote: Hi all!
>
>
> I own a Toshiba laptop P100-400 with a Intel PRO/Wireless 3945ABG
> wireless adapter. I've managed to get it working with normal WEP
> authentication, but no success with wpa_supplicant (and I really need it
> for WPA auth).
>
> # /etc/init.d/net.eth1 restart
> * Stopping eth1
> * Bringing down eth1
> * Stopping dhcpcd on eth1
> ...
> [ ok ]
> * Shutting down eth1
> ...
> [
> ok ] * Stopping wpa_cli on eth1
> ...
> [ ok ]
> * Stopping wpa_supplicant on eth1
> ...
> [ ok ]
> * Starting eth1
> * Starting wpa_supplicant on eth1 ...
> ioctl[SIOCSIWMODE]: Resource temporarily unavailable
> Could not configure driver to use managed mode
> ioctl[SIOCGIWRANGE]: Resource temporarily unavailable
> ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
> WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Resource
> temporarily unavailable ioctl[SIOCSIWENCODEEXT]: Resource temporarily
> unavailable ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
> ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
> ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
> WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Resource temporarily
> unavailable
> [ ok ]th param 5 value 0x1 -
> * Starting wpa_cli on eth1
> ...
> [ ok
> ]
> * Failed to configure eth1 in the background
>
>
>
> Ugly, uh? :/
> Yeah
>
>
> A number of things, some of which you may know:
>
>
> 1) Don't add net.eth1 to runlevel. The ipw3945 module loading
> (/etc/modprobe.conf) runs ipw3945d init script which brings up net.eth1
> which is managed by wpa_supplicant. If you try and manage net.eth1
> yourself (with rc-update, or with something like ifplugd then things will
> get confused). I do have netplug configed for eth* but I think it knows
> how to get out of the way of wpa_supplicant.
>
> All you need to do is emerge ipw3945 - no rc-updating needed.
>
>
> 2) If you ever need to restart net.eth1, restart ipw3945d instead.
>
>
> 3) My wpa_supplicant.conf just as comparision:
>
>
> # Intel PRO/Wireless 3945 :: wpa_supplicant.conf
>
>
> ctrl_interface=/var/run/wpa_supplicant # DO NOT remove this line!
> ctrl_interface_group=0 # Only allow root to read config. ap_scan=1 #
> Allows wpa_supplicant to handle AP scanning.
>
>
> # The following configures wpa_supplicant for a WPA
> network={ ssid="foo"
> scan_ssid=1 # Use if SSID broadcast is disabled.
> psk="bar" # Your key here.
> }
>
>
> -- gentoo-user@gentoo.org mailing list
>
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [gentoo-user] ipw3945 and wpa_supplicant issues
2007-05-16 19:29 ` Brian Johnson
@ 2007-05-16 21:06 ` Dan Farrell
2007-05-17 3:42 ` Mike Mazur
0 siblings, 1 reply; 9+ messages in thread
From: Dan Farrell @ 2007-05-16 21:06 UTC (permalink / raw
To: gentoo-user
On Wed, 16 May 2007 12:29:15 -0700 (PDT)
"Brian Johnson" <brian@dogtoe.com> wrote:
> Actually, Will you are a bit wrong. Restarting the ipw3945d service
> yields the same results. Here's what happens when I restart the
> ipw3945 service:
> ...
> > ioctl[SIOCSIWMODE]: Resource temporarily unavailable
> > Could not configure driver to use managed mode
> > ioctl[SIOCGIWRANGE]: Resource temporarily unavailable
> > ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
> > WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Resource
> > temporarily unavailable ioctl[SIOCSIWENCODEEXT]: Resource
> > temporarily unavailable ioctl[SIOCSIWENCODEEXT]: Resource
> > temporarily unavailable ioctl[SIOCSIWENCODEEXT]: Resource
> > temporarily unavailable ioctl[SIOCSIWAUTH]: Resource temporarily
> > unavailable WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]:
> > Resource temporarily unavailable
> > [ ok ]th param 5 value 0x1 -
> > * Starting wpa_cli on eth1... [ ok ]
> > * Failed to configure eth1 in the background
> > Ugly, uh? :/
Quite. It sounds like maybe you need to insert a few more modules, or
maybe need wireless extensions enabled in the kernel?
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gentoo-user] ipw3945 and wpa_supplicant issues
2007-05-16 21:06 ` Dan Farrell
@ 2007-05-17 3:42 ` Mike Mazur
2007-05-17 6:07 ` Will Briggs
0 siblings, 1 reply; 9+ messages in thread
From: Mike Mazur @ 2007-05-17 3:42 UTC (permalink / raw
To: gentoo-user
Hi,
> "Brian Johnson" <brian@dogtoe.com> wrote:
> > > ioctl[SIOCSIWMODE]: Resource temporarily unavailable
> > > Could not configure driver to use managed mode
> > > ioctl[SIOCGIWRANGE]: Resource temporarily unavailable
> > > ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
> > > WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Resource
> > > temporarily unavailable ioctl[SIOCSIWENCODEEXT]: Resource
> > > temporarily unavailable ioctl[SIOCSIWENCODEEXT]: Resource
> > > temporarily unavailable ioctl[SIOCSIWENCODEEXT]: Resource
> > > temporarily unavailable ioctl[SIOCSIWAUTH]: Resource temporarily
> > > unavailable WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]:
> > > Resource temporarily unavailable
> > > [ ok ]th param 5 value 0x1 -
> > > * Starting wpa_cli on eth1... [ ok ]
I'm seeing the same issues with my network card as well. I have this
wireless adapter:
Network controller: Intel Corporation PRO/Wireless 3945ABG Network
Connection (rev 02)
My adapter works fine on first boot, but should it crash (sometimes
ipw3945d crashes) and requires me to /etc/init.d/net.eth1 restart, it
never works. I'm forced to reboot.
It'd be great figure this out :)
Mike
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gentoo-user] ipw3945 and wpa_supplicant issues
2007-05-17 3:42 ` Mike Mazur
@ 2007-05-17 6:07 ` Will Briggs
0 siblings, 0 replies; 9+ messages in thread
From: Will Briggs @ 2007-05-17 6:07 UTC (permalink / raw
To: gentoo-user
Mike Mazur wrote:
> Hi,
>
>> "Brian Johnson" <brian@dogtoe.com> wrote:
>> > > ioctl[SIOCSIWMODE]: Resource temporarily unavailable
>> > > Could not configure driver to use managed mode
>> > > ioctl[SIOCGIWRANGE]: Resource temporarily unavailable
>> > > ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
>> > > WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Resource
>> > > temporarily unavailable ioctl[SIOCSIWENCODEEXT]: Resource
>> > > temporarily unavailable ioctl[SIOCSIWENCODEEXT]: Resource
>> > > temporarily unavailable ioctl[SIOCSIWENCODEEXT]: Resource
>> > > temporarily unavailable ioctl[SIOCSIWAUTH]: Resource temporarily
>> > > unavailable WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]:
>> > > Resource temporarily unavailable
>> > > [ ok ]th param 5 value 0x1 -
>> > > * Starting wpa_cli on eth1... [ ok ]
>
> I'm seeing the same issues with my network card as well. I have this
> wireless adapter:
>
> Network controller: Intel Corporation PRO/Wireless 3945ABG Network
> Connection (rev 02)
>
> My adapter works fine on first boot, but should it crash (sometimes
> ipw3945d crashes) and requires me to /etc/init.d/net.eth1 restart, it
> never works. I'm forced to reboot.
>
> It'd be great figure this out :)
> Mike
Weird, For me it just works :-
/etc/init.d/ipw394d restart
I do see the results you post on occassion - but the following gets
things back on track:
/etc/init.d/net.eth1 stop
/etc/init.d/ipw3945d stop
killall wpa_supplicant
killall ipw3945d
modprobe -r ipw3945
modprobe ipw3945
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2007-05-17 6:14 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-04-10 15:09 [gentoo-user] ipw3945 and wpa_supplicant issues José Pedro Saraiva
2007-04-26 0:11 ` José Pedro Saraiva
2007-04-26 10:03 ` Christian
2007-04-26 10:15 ` [gentoo-user] " Alexander Skwar
2007-04-27 3:35 ` [gentoo-user] " Will Briggs
2007-05-16 19:29 ` Brian Johnson
2007-05-16 21:06 ` Dan Farrell
2007-05-17 3:42 ` Mike Mazur
2007-05-17 6:07 ` Will Briggs
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox