Re: [gentoo-user] remote ssh session does not reflect my keyboard inputs

[Mick <michaelkintzios@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 1300 bytes --]

On Tuesday 08 May 2007 12:53, Hans-Werner Hilse wrote:
> Hi,
>
> On Mon, 7 May 2007 23:12:31 +0100 Mick <michaelkintzios@gmail.com>
>
> wrote:
> > =================
> > $ echo $TERM
> > rxvt
> >
> > $ sudo echo $TERM
> > rxvt
> > =================
> > which is the same like my Gentoo box.
>
> That doesn't matter. Question is rather whether the target machine has
> an entry in its terminfo db (/usr/share/terminfo). On ubuntu, this is
> provided by ncurses-base (so I would suspect it might be installed).
>
> You can also try to set TERM to "vt102" or "vt100":
> $ export TERM=vt102
>
> But if it works this way, that would mean /usr/share/terminfo/r/rxvt is
> borked. Note that there might be terminfo databases w/ higher
> precedence in /etc/terminfo and /lib/terminfo.

I've tried bind -p | grep history and it did not work:
==========================================
$ sudo bind -p | grep history
Password:
sudo: bind: command not found
==========================================

I also tried changing the terminal once I logged in to the remote machine, but 
I am getting the same error:
==========================================
$ export TERM=vt100
$ ^[[B^[[B
==========================================

What else could I try?
-- 
Regards,
Mick

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]