Am Freitag, 11. Mai 2007 schrieb ext Dan Farrell:

> Secondly, in addition to some kind of driver for IDE, either generic or
> specific, you need the cdrom driver (module: cdrom.ko) for cdrom
> support.
>
> My guess is, you upgraded the kernel and fell into the commonly
> experienced PATA driver burn -- there's two driver sets now, an
> experimental one and the old ones, and you have to make sure to get the
> right one for your configuration.

And if you use the new one, you have to be aware that it is attached to the 
SCSI subsystem now. This means that you have to enable SCSI as well as 
support for SCSI disks (CONFIG_BLK_DEV_SD=y) and SCSI cdroms 
(CONFIG_BLK_DEV_SR=m => sr_mod.ko), just as you would do with SATA.

Bye...

	Dirk
-- 
Dirk Heinrichs          | Tel:  +49 (0)162 234 3408
Configuration Manager   | Fax:  +49 (0)211 47068 111
Capgemini Deutschland   | Mail: dirk.heinrichs@capgemini.com
Wanheimerstraße 68      | Web:  http://www.capgemini.com
D-40468 Düsseldorf      | ICQ#: 110037733
GPG Public Key C2E467BB | Keyserver: www.keyserver.net