[gentoo-user] no CD or DVD but "rules" seem correct

[gentoo-user] no CD or DVD but "rules" seem correct

[maxim wexler]

Hi group,

After upgrading from 2.6.16 to 2.6.20 kernel I no
longer can access CD or DVD.

Here's the rules.d file:

localhost heathen # cat /etc/udev/rules.d/70*cd.rules
# This file was automatically generated by the
/lib/udev/write_cd_rules
# program, probably run by the
cd-aliases-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on
a single line
# and set the $GENERATED variable.

# LITE-ON_LTR-52327S (pci-0000:00:08.0-ide-0:0)
ENV{ID_CDROM}=="?*",
ENV{ID_PATH}=="pci-0000:00:08.0-ide-0:0",
SYMLINK+="cdrom", ENV{GENERATED}="1"
ENV{ID_CDROM}=="?*",
ENV{ID_PATH}=="pci-0000:00:08.0-ide-0:0",
SYMLINK+="cdrw", ENV{GENERATED}="1"
# CREATIVE_DVD-ROM_DVD6240E (pci-0000:00:08.0-ide-0:1)
ENV{ID_CDROM}=="?*",
ENV{ID_PATH}=="pci-0000:00:08.0-ide-0:1",
SYMLINK+="cdrom1", ENV{GENERATED}="1"
ENV{ID_CDROM}=="?*",
ENV{ID_PATH}=="pci-0000:00:08.0-ide-0:1",
SYMLINK+="dvd1", ENV{GENERATED}="1"

I can't even manually make the link cause there's no
more /dev/hdc or /dev/hdd under $ls /dev. Nor do these
devices appear in dmesg.

Which is very puzzling cause in fstab it says:

<...>
/dev/hdc        /cdrom  auto    noauto,user     0 0
/dev/hdd        /dvd    auto    noauto,user     0 0
<...>

But this gives no warning in the boot console that
some things weren't mounted.

Can someone please enlighten me?

Maxim





 
____________________________________________________________________________________
Bored stiff? Loosen up... 
Download and play hundreds of games for free on Yahoo! Games.
http://games.yahoo.com/games/front
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] no CD or DVD but "rules" seem correct

[Dirk Heinrichs]

[-- Attachment #1: Type: text/plain, Size: 973 bytes --]

Am Mittwoch, 9. Mai 2007 schrieb ext maxim wexler:
> Hi group,
>
> After upgrading from 2.6.16 to 2.6.20 kernel I no
> longer can access CD or DVD.

Did you change anything in the setup? Forgot CDRom support, maybe?

> I can't even manually make the link cause there's no
> more /dev/hdc or /dev/hdd under $ls /dev. Nor do these
> devices appear in dmesg.

If it doesn't appear there, there's no driver loaded. Did you compile CDRom 
support into the kernel or did you (auto-)load the module?

> Which is very puzzling cause in fstab it says:

It doesn't matter what fstab says (at least this case :-) ).

Bye...

	Dirk
-- 
Dirk Heinrichs          | Tel:  +49 (0)162 234 3408
Configuration Manager   | Fax:  +49 (0)211 47068 111
Capgemini Deutschland   | Mail: dirk.heinrichs@capgemini.com
Wanheimerstraße 68      | Web:  http://www.capgemini.com
D-40468 Düsseldorf      | ICQ#: 110037733
GPG Public Key C2E467BB | Keyserver: www.keyserver.net

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-user] no CD or DVD but "rules" seem correct

[Alan McKinnon]

On Wednesday 09 May 2007, maxim wexler wrote:
> Hi group,
>
> After upgrading from 2.6.16 to 2.6.20 kernel I no
> longer can access CD or DVD.

LOTS of kernel config changes related to ATA/SATA/PATA/IDE/libata 
changed in 2.6.18 and 2.6.19 - menus moved around, the code was 
refactored, selection names changed, etc, etc.

If you are not absolutely sure your config is correct, please post 
your .config, lspci and details about what hardware you really have

alan


-- 
Optimists say the glass is half full,
Pessimists say the glass is half empty,
Developers say wtf is the glass twice as big as it needs to be?

Alan McKinnon
alan at linuxholdings dot co dot za
+27 82, double three seven, one nine three five
-- 
gentoo-user@gentoo.org mailing list

RE: [gentoo-user] no CD or DVD but "rules" seem correct

[gummnmi-live]

[-- Attachment #1: Type: text/plain, Size: 545 bytes --]

I can't even manually make the link cause there's no
more /dev/hdc or /dev/hdd under $ls /dev. Nor do these
devices appear in dmesg.

Maybe you didn't built your kernel with IDE support. This might be the case if you use SATA harddisks. Try this command:

zgrep IDE= /proc/config.gz;zgrep -w BLK_DEV_IDE= /proc/config.gz;zgrep BLK_DEV_IDECD= /proc/config.gz

and post the output.

Greetz,

M i c h a e l



       
---------------------------------
Kennt man wirklich jeden über 3 Ecken? Die Antworten gibt's bei Yahoo! Clever.

[-- Attachment #2: Type: text/html, Size: 1088 bytes --]

Re: [gentoo-user] no CD or DVD but "rules" seem correct

[maxim wexler]

--- Alan McKinnon <alan@linuxholdings.co.za> wrote:

> On Wednesday 09 May 2007, maxim wexler wrote:
> > Hi group,
> >
> > After upgrading from 2.6.16 to 2.6.20 kernel I no
> > longer can access CD or DVD.
> 
> LOTS of kernel config changes related to
> ATA/SATA/PATA/IDE/libata 
> changed in 2.6.18 and 2.6.19 - menus moved around,
> the code was 
> refactored, selection names changed, etc, etc.
> 
> If you are not absolutely sure your config is
> correct, please post 
> your .config, lspci and details about what hardware
> you really have

done

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20-gentoo-r6
# Mon Apr 30 16:04:50 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=m
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"

#
# Processor type and features
#
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
CONFIG_M586=y
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MCORE2 is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_F00F_BUG=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_ALIGNMENT_16=y
# CONFIG_HPET_TIMER is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_KEXEC is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_COMPAT_VDSO is not set

#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set

#
# ACPI (Advanced Configuration and Power Interface)
Support
#

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_NET_KEY=m
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set

#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set

#
# Misc devices
#
# CONFIG_SGI_IOC4 is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on
IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=m
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple
LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set

#
# Serial ATA (prod) and Parallel ATA (experimental)
drivers
#
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
# CONFIG_IEEE1394_EXPORT_FULL_API is not set

#
# Device Drivers
#

#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=m

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Macintosh device drivers
#
# CONFIG_MAC_EMUMOUSEBTN is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#
# CONFIG_PHYLIB is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=m
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
CONFIG_S2IO=m
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
CONFIG_SLIP=m
# CONFIG_SLIP_COMPRESSED is not set
CONFIG_SLHC=m
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_FC is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
CONFIG_AGP_NVIDIA=m
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#

#
# I2C support
#
# CONFIG_I2C is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
CONFIG_HWMON=m
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=m
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_VIDEO_SELECT is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=m
# CONFIG_FB_RADEON_I2C is not set
CONFIG_FB_RADEON_DEBUG=y
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m

#
# HID Devices
#
CONFIG_HID=m

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
CONFIG_USB_DEBUG=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk
support'
#

#
# may also be needed; see USB_STORAGE Help for more
information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_APPLETOUCH is not set

#
# USB Imaging devices
#
# CONFIG_USB_MICROTEK is not set

#
# USB Network Adapters
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# LED devices
#
# CONFIG_NEW_LEDS is not set

#
# LED drivers
#

#
# LED Triggers
#

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# EDAC - error detection and reporting (RAS)
(EXPERIMENTAL)
#

#
# Real Time Clock
#

#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set

#
# DMA Clients
#

#
# DMA Devices
#

#
# Virtualization
#

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_HFSPLUS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=m
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_EARLY_PRINTK=y
CONFIG_DOUBLEFAULT=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y


localhost linux # lspci
00:00.0 Host bridge: nVidia Corporation nForce3 250Gb
Host Bridge (rev a1)
00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb
LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI
System Management (rev a1)
00:02.0 USB Controller: nVidia Corporation CK8S USB
Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation CK8S USB
Controller (rev a1)
00:02.2 USB Controller: nVidia Corporation nForce3
EHCI USB 2.0 Controller (rev a2)
00:05.0 Bridge: nVidia Corporation CK8S Ethernet
Controller (rev a2)
00:06.0 Multimedia audio controller: nVidia
Corporation nForce3 250Gb AC'97 Audio Controller (rev
a1)
00:08.0 IDE interface: nVidia Corporation CK8S
Parallel ATA Controller (v2.5) (rev a2)
00:0a.0 IDE interface: nVidia Corporation CK8S Serial
ATA Controller (v2.5) (rev a2)
00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb
AGP Host to PCI Bridge (rev a2)
00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb
PCI-to-PCI Bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology
Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies
Inc RV280 [Radeon 9200 PRO] (rev 01)
01:00.1 Display controller: ATI Technologies Inc RV280
[Radeon 9200 PRO] (Secondary) (rev 01)
02:09.0 Communication controller: NetMos Technology
PCI 1 port parallel adapter (rev 01)
02:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc.
IEEE 1394 Host Controller (rev 80)
02:0c.0 RAID bus controller: Silicon Image, Inc. SiI
3114 [SATALink/SATARaid] Serial ATA Controller (rev
02)
localhost linux #   

As in the original post have /dev/hdc lite-on cdrom
reader/writer and /dev/hdd have creative labs dvd reader.

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] no CD or DVD but "rules" seem correct

[Alan McKinnon]

On Wednesday 09 May 2007, maxim wexler wrote:
> --- Alan McKinnon <alan@linuxholdings.co.za> wrote:
> > On Wednesday 09 May 2007, maxim wexler wrote:
> > > Hi group,
> > >
> > > After upgrading from 2.6.16 to 2.6.20 kernel I no
> > > longer can access CD or DVD.
> >
> > LOTS of kernel config changes related to
> > ATA/SATA/PATA/IDE/libata
> > changed in 2.6.18 and 2.6.19 - menus moved around,
> > the code was
> > refactored, selection names changed, etc, etc.
> >
> > If you are not absolutely sure your config is
> > correct, please post
> > your .config, lspci and details about what hardware
> > you really have
>
> done

You didn't say what bus type of cd & dvd you have, so I'm going to 
assume that they are IDE (or PATA in the new lingo). Speak up if they 
are actually SATA devices

[snip]
> #
> # Processor type and features
> #
[snip]
> CONFIG_M586=y
Nothing to do with your disks, but why this setting?
You seem to have a 64bit Opteron, not a MkI pentium
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUMM is not set
> # CONFIG_MCORE2 is not set
> # CONFIG_MPENTIUM4 is not set
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MK8 is not set
maybe this one is more suitable for your hardware
[snip]
> #
> # ATA/ATAPI/MFM/RLL support
> #
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=y
>
> #
> # Please see Documentation/ide.txt for help/info on
> IDE drives
> #
> # CONFIG_BLK_DEV_IDE_SATA is not set
> # CONFIG_BLK_DEV_HD_IDE is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> CONFIG_BLK_DEV_IDECD=y
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> # CONFIG_BLK_DEV_IDESCSI is not set
> # CONFIG_IDE_TASK_IOCTL is not set
>
> #
> # IDE chipset support/bugfixes
> #
> CONFIG_IDE_GENERIC=m

is this module loaded?

> # CONFIG_BLK_DEV_CMD640 is not set
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> # CONFIG_BLK_DEV_OFFBOARD is not set
> # CONFIG_BLK_DEV_GENERIC is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> CONFIG_BLK_DEV_AMD74XX=m

is this module loaded?

> # CONFIG_BLK_DEV_ATIIXP is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_CS5535 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_JMICRON is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> # CONFIG_BLK_DEV_PIIX is not set
> # CONFIG_BLK_DEV_IT821X is not set
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> CONFIG_BLK_DEV_SIIMAGE=m
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> # CONFIG_BLK_DEV_VIA82CXXX is not set
> # CONFIG_IDE_ARM is not set
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_IDEDMA_IVB is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_BLK_DEV_HD is not set

[snip]

> #
> # Serial ATA (prod) and Parallel ATA (experimental)
> drivers
> #
> CONFIG_ATA=y
> # CONFIG_ATA_NONSTANDARD is not set
> # CONFIG_SATA_AHCI is not set
> # CONFIG_SATA_SVW is not set
> # CONFIG_ATA_PIIX is not set
> CONFIG_SATA_NV=y
> # CONFIG_PDC_ADMA is not set
> # CONFIG_SATA_QSTOR is not set
> # CONFIG_SATA_PROMISE is not set
> CONFIG_SATA_SIL=y
> # CONFIG_SATA_SIL24 is not set
> # CONFIG_SATA_SIS is not set
> # CONFIG_SATA_ULI is not set
> # CONFIG_SATA_VIA is not set
> # CONFIG_SATA_VITESSE is not set
> # CONFIG_PATA_AMD is not set

You could try this one as a module and see if it works

[snip]

> As in the original post have /dev/hdc lite-on cdrom
> reader/writer and /dev/hdd have creative labs dvd reader.

At first glance your .config looks ok, so make sure those modules are in 
fact loading.

And we should check that the devices haven't changed names meanwhile... 
The major/minor numbers will be the same, so run ls -al and grep for 
these strings:


"3,  0"
"22,  0"
"33,  0"

and anything else you might find relevant in 
<kernel-sources>/Documentation/devices.txt

alan

 

-- 
Optimists say the glass is half full,
Pessimists say the glass is half empty,
Developers say wtf is the glass twice as big as it needs to be?

Alan McKinnon
alan at linuxholdings dot co dot za
+27 82, double three seven, one nine three five
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] no CD or DVD but "rules" seem correct-FIXED

[maxim wexler]

 
> > CONFIG_M586=y
> Nothing to do with your disks, but why this setting?
> You seem to have a 64bit Opteron, not a MkI pentium

CPU is an AMD product, sempron3100, 32bit. It's based
on the 3200 64bit. 

> > CONFIG_IDE_GENERIC=m
> 
> is this module loaded?

Overlooked this one. I loaded it and the lite-on CD
now works but not the DVD.

> > CONFIG_BLK_DEV_AMD74XX=m
> 
> is this module loaded?

Didn't make a difference.
 
> And we should check that the devices haven't changed
> names meanwhile... 
> The major/minor numbers will be the same, so run ls
> -al and grep for 
> these strings:
 
ls -al where? Under /dev

lrwxrwxrwx  1 root    root         3 May  9 08:25
cdrom -> hdc
lrwxrwxrwx  1 root    root         3 May  9 08:25
cdrom1 -> hdd
lrwxrwxrwx  1 root    root         3 May  9 08:25 cdrw
-> hdc

appear since loading ide-generic.ko

heathen@localhost ~ $ ls -l /dev/hdd
brw-rw---- 1 root cdrom 22, 64 May  9 08:25 /dev/hdd

Which matches numbers from devices.txt.

OK, success! gmplayer looks for /dev/dvd so I changed
that in gmplayer->preferences to /dev/cdrom1 and now
all is peace and light.

Thanks Alan

Maxim

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] no CD or DVD but "rules" seem correct-FIXED

[Alan McKinnon]

On Wednesday 09 May 2007, maxim wexler wrote:
> lrwxrwxrwx  1 root    root         3 May  9 08:25
> cdrom -> hdc
> lrwxrwxrwx  1 root    root         3 May  9 08:25
> cdrom1 -> hdd
> lrwxrwxrwx  1 root    root         3 May  9 08:25 cdrw
> -> hdc
>
> appear since loading ide-generic.ko
>
> heathen@localhost ~ $ ls -l /dev/hdd
> brw-rw---- 1 root cdrom 22, 64 May  9 08:25 /dev/hdd

Cool. It seemed to me that you set ide-generic to "M" by mistake as 
everything else is "*". You could either change the config and 
recompile/install, or put ide-config 
in /etc/modules.autoload.d/kernel-2.6

Does the dvd device also work correctly now?

-- 
Optimists say the glass is half full,
Pessimists say the glass is half empty,
Developers say wtf is the glass twice as big as it needs to be?

Alan McKinnon
alan at linuxholdings dot co dot za
+27 82, double three seven, one nine three five
--
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] no CD or DVD but "rules" seem correct-FIXED-or, not

[maxim wexler]

--- Alan McKinnon <alan@linuxholdings.co.za> wrote:

> On Wednesday 09 May 2007, maxim wexler wrote:
> > lrwxrwxrwx  1 root    root         3 May  9 08:25
> > cdrom -> hdc
> > lrwxrwxrwx  1 root    root         3 May  9 08:25
> > cdrom1 -> hdd
> > lrwxrwxrwx  1 root    root         3 May  9 08:25
> cdrw
> > -> hdc
> >
> > appear since loading ide-generic.ko
> >
> > heathen@localhost ~ $ ls -l /dev/hdd
> > brw-rw---- 1 root cdrom 22, 64 May  9 08:25
> /dev/hdd
> 
> Cool. It seemed to me that you set ide-generic to
> "M" by mistake as 
> everything else is "*". You could either change the
> config and 
> recompile/install, or put ide-config 
> in /etc/modules.autoload.d/kernel-2.6
> 
> Does the dvd device also work correctly now?

I thought so until now having restarted the box -- I
did put ide-generic into the autoload file before
shutdown yesterday -- tried to play a DVD with
gmplayer. Couldn't find the drive again. I just
assumed it had "forgotten" that in preferences->misc
the path to the drive had been changed from /dev/dvd
to /dev/cdrom1. Nope, that was still correct. Then I
did an ls -l under /dev and this appeared:

<...>
lrwxrwxrwx 1 root    root         3 May 10 02:23
cdrom2 -> hdc
lrwxrwxrwx 1 root    root         3 May 10 02:23
cdrom3 -> hdd
lrwxrwxrwx 1 root    root         3 May 10 02:23 cdrw2
-> hdc
<...>

Compare this to the above. Something is incrementing
the drive numbers!

Does this have something to do with having modularized
the driver? 

Guess my next stop is /usr/src/linux...

...to be cont'd

> 
> -- 
> Optimists say the glass is half full,
> Pessimists say the glass is half empty,
> Developers say wtf is the glass twice as big as it
> needs to be?
> 
> Alan McKinnon
> alan at linuxholdings dot co dot za
> +27 82, double three seven, one nine three five
> --
> gentoo-user@gentoo.org mailing list
> 
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] no CD or DVD but "rules" seem correct-FIXED-or, not

[Dan Farrell]

On Thu, 10 May 2007 08:50:34 -0700 (PDT)
maxim wexler <blissfix@yahoo.com> wrote:

> 
> --- Alan McKinnon <alan@linuxholdings.co.za> wrote:
> 
> > On Wednesday 09 May 2007, maxim wexler wrote:
> > > lrwxrwxrwx  1 root    root         3 May  9 08:25
> > > cdrom -> hdc
> > > lrwxrwxrwx  1 root    root         3 May  9 08:25
> > > cdrom1 -> hdd
> > > lrwxrwxrwx  1 root    root         3 May  9 08:25
> > cdrw
> > > -> hdc
> > > [ /dev device nodes for cdroms ]
> > > appear since loading ide-generic.ko
> > >
For one thing, generic IDE support is certainly less appropriate than
support for your IDE card.  Hardware-specific options cna be enabled
and you might gain DMA if your hardware is really unusual.  I can say
from experience that generic ide support doesn't provide anything that
drivers specific to your hardware fails to provide, unless I
misunderstand greatly. It's not a question of increased functionality
necessarily, but one of performance, and possibly less overhead for the
CPU.  

Secondly, in addition to some kind of driver for IDE, either generic or
specific, you need the cdrom driver (module: cdrom.ko) for cdrom
support.  

My guess is, you upgraded the kernel and fell into the commonly
experienced PATA driver burn -- there's two driver sets now, an
experimental one and the old ones, and you have to make sure to get the
right one for your configuration.  

Dont forget, you'll also need to have the ISO9660 and possibly UDF
filesysem supported.  
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] no CD or DVD but "rules" seem correct-FIXED-or, not

[maxim wexler]

> My guess is, you upgraded the kernel and fell into
> the commonly
> experienced PATA driver burn -- there's two driver
> sets now, an
> experimental one and the old ones, and you have to
> make sure to get the
> right one for your configuration.  

What I did was write a 10-local.rules file following
the model at reactivated.net/writing_udev_rules.html.
So now I get the proper symlinks:

heathen@localhost ~ $ ls -l /dev/cd*
lrwxrwxrwx 1 root root 3 May 10 10:21 /dev/cdrom ->
hdc
heathen@localhost ~ $ ls -l /dev/dvd
lrwxrwxrwx 1 root root 3 May 10 10:21 /dev/dvd -> hdd

plus these unwanted ones which are the result of
70-persistent-cd.rules                             

lrwxrwxrwx 1 root root 3 May 10 10:21 /dev/cdrom4 ->
hdc
lrwxrwxrwx 1 root root 3 May 10 10:21 /dev/cdrom5 ->
hdd
lrwxrwxrwx 1 root root 3 May 10 10:21 /dev/cdrw4 ->
hdc

question is, how do I turn off persistent-cd rules?
Even if I delete it another is generated when the PC
boots.

Do I delete /lib/udev*/write_cd_rules? 

According to the FAQ persistence is most useful for
devices that are likely to be plugged in and out
fairly often. I don't expect to do that with the
optical drives.

Maxim



 
____________________________________________________________________________________
Don't get soaked.  Take a quick peak at the forecast
with the Yahoo! Search weather shortcut.
http://tools.search.yahoo.com/shortcuts/#loc_weather
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] no CD or DVD but "rules" seem correct-FIXED-or, not

[Dirk Heinrichs]

[-- Attachment #1: Type: text/plain, Size: 1092 bytes --]

Am Freitag, 11. Mai 2007 schrieb ext Dan Farrell:

> Secondly, in addition to some kind of driver for IDE, either generic or
> specific, you need the cdrom driver (module: cdrom.ko) for cdrom
> support.
>
> My guess is, you upgraded the kernel and fell into the commonly
> experienced PATA driver burn -- there's two driver sets now, an
> experimental one and the old ones, and you have to make sure to get the
> right one for your configuration.

And if you use the new one, you have to be aware that it is attached to the 
SCSI subsystem now. This means that you have to enable SCSI as well as 
support for SCSI disks (CONFIG_BLK_DEV_SD=y) and SCSI cdroms 
(CONFIG_BLK_DEV_SR=m => sr_mod.ko), just as you would do with SATA.

Bye...

	Dirk
-- 
Dirk Heinrichs          | Tel:  +49 (0)162 234 3408
Configuration Manager   | Fax:  +49 (0)211 47068 111
Capgemini Deutschland   | Mail: dirk.heinrichs@capgemini.com
Wanheimerstraße 68      | Web:  http://www.capgemini.com
D-40468 Düsseldorf      | ICQ#: 110037733
GPG Public Key C2E467BB | Keyserver: www.keyserver.net

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-user] no CD or DVD but "rules" seem correct-FIXED-or, not

[maxim wexler]

> And if you use the new one, you have to be aware
> that it is attached to the 
> SCSI subsystem now. This means that you have to
> enable SCSI as well as 
> support for SCSI disks (CONFIG_BLK_DEV_SD=y) and
> SCSI cdroms 
> (CONFIG_BLK_DEV_SR=m => sr_mod.ko), just as you
> would do with SATA.

Thanks, Dirk but that's not the problem anymore.
Problem is persistent-CD.rules that keeps getting
re-written every boot. I've already written a
10-local.rules to handle my _one_ CD, /dev/cdrom->
/dev/hdc and _one_ DVD, /dev/dvd-> /dev/hdd drive but
persistent seems to think the symlinks should be
called /dev/cdrom4 and /dev/cdrom5.

I delete the persistant file, like I say, but it gets
rewritten when I reboot and re-establishes the wrong
symlinks, I suspect by /lib/udev/write_cd_rules.

Question is: Can I safely delete
/lib/udev/write_cd_rules or disable it somehow?

Maxim


       
____________________________________________________________________________________Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games.
http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow  
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] no CD or DVD but "rules" seem correct-FIXED-or, not

[Dirk Heinrichs]

[-- Attachment #1: Type: text/plain, Size: 840 bytes --]

Am Freitag, 11. Mai 2007 schrieb maxim wexler:

> Problem is persistent-CD.rules that keeps getting
> re-written every boot.

Hmm that's strange. Doesn't happen on my system(s).

> I've already written a 
> 10-local.rules to handle my _one_ CD, /dev/cdrom->
> /dev/hdc and _one_ DVD, /dev/dvd-> /dev/hdd drive but
> persistent seems to think the symlinks should be
> called /dev/cdrom4 and /dev/cdrom5.

Can you post the relevant lines from 10.local.rules.

> I delete the persistant file, like I say, but it gets
> rewritten when I reboot and re-establishes the wrong
> symlinks, I suspect by /lib/udev/write_cd_rules.

> Question is: Can I safely delete
> /lib/udev/write_cd_rules or disable it somehow?

I suspect it will be re-installed at next udev update. What's your udev 
version, BTW.?

Bye...

	Dirk


[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-user] no CD or DVD but "rules" seem correct-FIXED-or, not

[maxim wexler]

> Can you post the relevant lines from 10.local.rules.

heathen@localhost ~ $ cat /etc/udev/rules.d/10*
 BUS=="ide", KERNEL=="hdc", SYMLINK+="cdrom",
GROUP="cdrom"
 BUS=="ide", KERNEL=="hdd", SYMLINK+="dvd",
GROUP="cdrom"
heathen@localhost ~ $     

see http://www.reactivated.net/writing_udev_rules.html
                                  under Examples ->
cd/dvd drives for the model I used. 

> I suspect it will be re-installed at next udev
> update. What's your udev 
> version, BTW.?

udev-104-r12

> 
> Bye...
> 
> 	Dirk



       
____________________________________________________________________________________Be a better Heartthrob. Get better relationship answers from someone who knows. Yahoo! Answers - Check it out. 
http://answers.yahoo.com/dir/?link=list&sid=396545433
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] no CD or DVD but "rules" seem correct-FIXED-or, not

[Dirk Heinrichs]

[-- Attachment #1: Type: text/plain, Size: 616 bytes --]

Am Freitag, 11. Mai 2007 schrieb maxim wexler:
> > Can you post the relevant lines from 10.local.rules.
>
> heathen@localhost ~ $ cat /etc/udev/rules.d/10*
>  BUS=="ide", KERNEL=="hdc", SYMLINK+="cdrom",
> GROUP="cdrom"
>  BUS=="ide", KERNEL=="hdd", SYMLINK+="dvd",
> GROUP="cdrom"
> heathen@localhost ~ $

Maybe you should try adding OPTIONS+="last_rule" to stop device node 
generations for CD/DVD devices after your rules.

> > I suspect it will be re-installed at next udev
> > update. What's your udev
> > version, BTW.?
>
> udev-104-r12

Hmm, I'm at 111, but I run ~x86.

HTH...

	Dirk

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-user] no CD or DVD but "rules" seem correct-FIXED-no, really

[maxim wexler]

--- Dirk Heinrichs <dirk.heinrichs@online.de> wrote:

> Am Freitag, 11. Mai 2007 schrieb maxim wexler:
> > > Can you post the relevant lines from
> 10.local.rules.
> >
> > heathen@localhost ~ $ cat /etc/udev/rules.d/10*
> >  BUS=="ide", KERNEL=="hdc", SYMLINK+="cdrom",
> > GROUP="cdrom"
> >  BUS=="ide", KERNEL=="hdd", SYMLINK+="dvd",
> > GROUP="cdrom"
> > heathen@localhost ~ $
> 
> Maybe you should try adding OPTIONS+="last_rule" to
> stop device node 
> generations for CD/DVD devices after your rules.

Awesome! Eyes must have glazed over when I got to that
part.

> > udev-104-r12
> 
> Hmm, I'm at 111, but I run ~x86.
> 

That's unreal. I last did a sync on Apr 23 and
upgraded udev the next day. That's like a new version
every other day. I was gonna say I'm running an ~x86
too, meaning an AMD product. Then I noticed the tilde.
Does that make a difference?

Thanks,

Maxim



       
____________________________________________________________________________________Luggage? GPS? Comic books? 
Check out fitting gifts for grads at Yahoo! Search
http://search.yahoo.com/search?fr=oni_on_mail&p=graduation+gifts&cs=bz
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] no CD or DVD but "rules" seem correct-FIXED-no, really

[Dirk Heinrichs]

[-- Attachment #1: Type: text/plain, Size: 649 bytes --]

Am Samstag, 12. Mai 2007 schrieb maxim wexler:

> > Maybe you should try adding OPTIONS+="last_rule" to
> > stop device node
> > generations for CD/DVD devices after your rules.
>
> Awesome! Eyes must have glazed over when I got to that
> part.

Does this mean it helped?

> > > udev-104-r12
> >
> > Hmm, I'm at 111, but I run ~x86.
>
> That's unreal. I last did a sync on Apr 23 and
> upgraded udev the next day. That's like a new version
> every other day. I was gonna say I'm running an ~x86
> too, meaning an AMD product. Then I noticed the tilde.
> Does that make a difference?

~ means "testing", w/o it it's known as "stable".

Bye...

	Dirk

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-user] no CD or DVD but "rules" seem correct-FIXED-no, really

[maxim wexler]

> > Awesome! Eyes must have glazed over when I got to
> that
> > part.
> 
> Does this mean it helped?

Yes, thanks a lot.

Maxim


       
____________________________________________________________________________________Ready for the edge of your seat? 
Check out tonight's top picks on Yahoo! TV. 
http://tv.yahoo.com/
-- 
gentoo-user@gentoo.org mailing list