[gentoo-user] Howto for Sendmail configuration?

[gentoo-user] Howto for Sendmail configuration?

[Dan Cowsill]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi list,
I started hosting a wordpress blog on my system and it came to my
attention that wordpress uses the PHP mail() function to do confirmation
emails.  The mail() function uses UNIX sendmail, and I figured I could
go ahead and configure that puppy up to send off my blog's email without
issue...

I was wrong.  One look at the sendmail configuration file actually
angered me because of all the crap I would no doubt have to go through
to get it working.

So what I am looking for is a simplified howto describing how I could
set up sendmail to deliver mail for me...

I also wonder if it's possible to use sendmail to relay mail to my gmail
account and send it from there?

Thank you very much,
Dan
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFGMk4n5vsIjOKjGzwRAlJlAJ0SHMZnjlkNaTHnyuhgPkR/5Q8IUACdHroz
HzwVvVEuzYJ9y8pkiJ5PwQY=
=rsBN
-----END PGP SIGNATURE-----
-- 
gentoo-user@gentoo.org mailing list

[gentoo-user] Re: Howto for Sendmail configuration?

[Alexander Skwar]

· Dan Cowsill <danthehat@gmail.com>:

> I was wrong.  One look at the sendmail configuration file actually
> angered me because of all the crap I would no doubt have to go through
> to get it working.

Yep. That's why I never had a closer look at sendmail. If possible,
I replace it everywhere.

> So what I am looking for is a simplified howto describing how I could
> set up sendmail to deliver mail for me...

Uhm, if you don't know sendmail, then why start with sendmail
in the first place? There are quite some easier MTAs out there.
I personally like Postfix best, but Exim seems to be popular
as well. And for simple setups something like ssmtp might even
be sufficient.

So, the real question is: Why do you want to use sendmail?
Is there any real reason?

> I also wonder if it's possible to use sendmail to relay mail to my gmail
> account and send it from there?

?
What do you want to accomplish? What benefit do you see by
doing that?

Alexander Skwar
-- 
BOFH Excuse #346:

Your/our computer(s) had suffered a memory leak, and we are waiting for them to be topped up.


-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Re: Howto for Sendmail configuration?

[Bo Ørsted Andresen]

[-- Attachment #1: Type: text/plain, Size: 410 bytes --]

On Sunday 29 April 2007 18:14:53 Dan Cowsill wrote:
> As per the gmail question, perhaps some clarification is in order.
> I'd like to use gmail's smtp server to send mail instead of my ISP's
> server.  Is this possible with the TLS/SSL encryption that Gmail uses?

Sure.

From /etc/ssmtp/ssmtp.conf:

mailhub=smtp.gmail.com:465

AuthUser=USERNAME@gmail.com
AuthPass=PASSWORD

-- 
Bo Andresen

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-user] Howto for Sendmail configuration?

[Randy Barlow]

On Fri, April 27, 2007 3:25 pm, Dan Cowsill wrote:
> So what I am looking for is a simplified howto describing how I could
> set up sendmail to deliver mail for me...

I really wouldn't recommend using Sendmail, especially not for just
sending mail and not receiving mail.  So my recommendation is that you
unmerge sendmail, and then merge ssmtp.  This is a very simple MTA and is
great if you just want to send mail.  It still offers the standard UNIX
sendmail script, except that it is a wrapper.  So:

1) Umerge sendmail.
2) Emerge ssmtp
3) Edit /etc/ssmtp/ssmtp.conf and set the mailhub variable to your ISP's
SMTP server.  For example, I have the line:

mailhub=smtp-server.carolina.rr.com

for one of my machines.  Hope this helps!

-- 
Randy Barlow
http://www.electronsweatshop.com
"Oh me of little faith..."
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Howto for Sendmail configuration?

[Mick]

[-- Attachment #1: Type: text/plain, Size: 644 bytes --]

On Saturday 28 April 2007 18:45, Randy Barlow wrote:
> On Fri, April 27, 2007 3:25 pm, Dan Cowsill wrote:
> > So what I am looking for is a simplified howto describing how I could
> > set up sendmail to deliver mail for me...
>
> I really wouldn't recommend using Sendmail, especially not for just
> sending mail and not receiving mail.  So my recommendation is that you
[snip]

Is smmtp all that is required?  I seem to be missing mail?
==========================================
echo test | mail -s "testing ssmtp" <my_mail_address>
-bash: mail: command not found
==========================================
-- 
Regards,
Mick

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-user] Howto for Sendmail configuration?

[Neil Bothwick]

[-- Attachment #1: Type: text/plain, Size: 394 bytes --]

On Sun, 29 Apr 2007 11:12:11 +0100, Mick wrote:

> Is smmtp all that is required?  I seem to be missing mail?
> ==========================================
> echo test | mail -s "testing ssmtp" <my_mail_address>
> -bash: mail: command not found
> ==========================================

emerge mail-client/mailx


-- 
Neil Bothwick

I must have slipped a disk; my pack hurts.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-user] Howto for Sendmail configuration?

[Mick]

[-- Attachment #1: Type: text/plain, Size: 502 bytes --]

On Sunday 29 April 2007 11:31, Neil Bothwick wrote:
> On Sun, 29 Apr 2007 11:12:11 +0100, Mick wrote:
> > Is smmtp all that is required?  I seem to be missing mail?
> > ==========================================
> > echo test | mail -s "testing ssmtp" <my_mail_address>
> > -bash: mail: command not found
> > ==========================================
>
> emerge mail-client/mailx

Thanks Neil, should I use mailx, or nail?  Is one a direct replacement for the 
other?
-- 
Regards,
Mick

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-user] Howto for Sendmail configuration?

[Neil Bothwick]

[-- Attachment #1: Type: text/plain, Size: 349 bytes --]

Hello Mick,

> > emerge mail-client/mailx  
> 
> Thanks Neil, should I use mailx, or nail?  Is one a direct replacement
> for the other?

According to the nail web site

" As of March 2006, nail has been integrated into the Heirloom project as
mailx."

So use mailx.


-- 
Neil Bothwick

Top Oxymorons Number 33: American history

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

[gentoo-user] Re: Howto for Sendmail configuration?

[Alexander Skwar]

· Neil Bothwick <neil@digimed.co.uk>:

> Hello Mick,
> 
>> > emerge mail-client/mailx  
>> 
>> Thanks Neil, should I use mailx, or nail?  Is one a direct replacement
>> for the other?
> 
> According to the nail web site
> 
> " As of March 2006, nail has been integrated into the Heirloom project as
> mailx."
> 
> So use mailx.

Hm, I don't know what the version numbers on 
http://packages.gentoo.org/search/?sstring=mailx mean
exactly, but I'd interprete 8.1.2.20050715-r1 as something
from 2005.

So: I differ. Install nail. 

Also, is Gentoo using stuff from the Heirloom Project?

Alexander Skwar
-- 
<jgoerzen> doogie: you sound highly unstable :-)
<Knghtbrd> jgoerzen - he is.
* doogie bops Knghtbrd
<Knghtbrd> see?  Resorting to violence =D


-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Howto for Sendmail configuration?

[Michael Sullivan]

On Sun, 2007-04-29 at 11:12 +0100, Mick wrote:
> On Saturday 28 April 2007 18:45, Randy Barlow wrote:
> > On Fri, April 27, 2007 3:25 pm, Dan Cowsill wrote:
> > > So what I am looking for is a simplified howto describing how I could
> > > set up sendmail to deliver mail for me...
> >
> > I really wouldn't recommend using Sendmail, especially not for just
> > sending mail and not receiving mail.  So my recommendation is that you
> [snip]
> 
> Is smmtp all that is required?  I seem to be missing mail?
> ==========================================
> echo test | mail -s "testing ssmtp" <my_mail_address>
> -bash: mail: command not found
> ==========================================

For that, you need mailx

-- 
gentoo-user@gentoo.org mailing list

[gentoo-user] Re: Howto for Sendmail configuration?

[Alexander Skwar]

· Mick <michaelkintzios@gmail.com>:

> On Saturday 28 April 2007 18:45, Randy Barlow wrote:
>> On Fri, April 27, 2007 3:25 pm, Dan Cowsill wrote:
>> > So what I am looking for is a simplified howto describing how I could
>> > set up sendmail to deliver mail for me...
>>
>> I really wouldn't recommend using Sendmail, especially not for just
>> sending mail and not receiving mail.  So my recommendation is that you
> [snip]
> 
> Is smmtp all that is required?

"Required" - for what?

> I seem to be missing mail? 

Then you should install it... It doesn't have anything to do with
sendmail or ssmtp.

According to http://www.rommel.stw.uni-erlangen.de/~fejf/cgi-bin/pfs-web.pl,
it can be part of nail. Maybe mailx also provides /usr/bin/mail.

Alexander Skwar
-- 
Time to take stock.  Go home with some office supplies.


-- 
gentoo-user@gentoo.org mailing list