[gentoo-user] Fwd: problem :eht0 not getting detected

[gentoo-user] Fwd: problem :eht0 not getting detected

[agam gupta]

[-- Attachment #1: Type: text/plain, Size: 305 bytes --]

hello

 i have recently started with gentoo.
 there is a problem
 my eth0 is not there in ifconfig (lo is only there ) .used ispci  it showed
realtek.
used modprobe-l |grep rtl
it gives rtl8150.ko
 the on modprobing rtl8150  it gets loaded
but
on ifconfig there is no eth0

what should i do ? please help

[-- Attachment #2: Type: text/html, Size: 422 bytes --]

Re: [gentoo-user] Fwd: problem :eht0 not getting detected

[Richard Cox]

Well specifically what kind of realtek ethernet card is it.  A quick count in my kernel config showed 3 different drivers for realtek.  You might want to try modprobing the other ones and see if that brings it up.

On Wed, Apr 11, 2007 at 11:34:28AM -0700, agam gupta wrote:
> hello
> 
> i have recently started with gentoo.
> there is a problem
> my eth0 is not there in ifconfig (lo is only there ) .used ispci  it showed
> realtek.
> used modprobe-l |grep rtl
> it gives rtl8150.ko
> the on modprobing rtl8150  it gets loaded
> but
> on ifconfig there is no eth0
> 
> what should i do ? please help
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Fwd: problem :eht0 not getting detected

[Joshua Doll]

[-- Attachment #1: Type: text/plain, Size: 839 bytes --]

what about ifconfig -a? I sometimes run into a problem where udev remaps the
ethernet device.

On 4/11/07, Richard Cox <khabi@pixelatedninja.com> wrote:
>
> Well specifically what kind of realtek ethernet card is it.  A quick count
> in my kernel config showed 3 different drivers for realtek.  You might want
> to try modprobing the other ones and see if that brings it up.
>
> On Wed, Apr 11, 2007 at 11:34:28AM -0700, agam gupta wrote:
> > hello
> >
> > i have recently started with gentoo.
> > there is a problem
> > my eth0 is not there in ifconfig (lo is only there ) .used ispci  it
> showed
> > realtek.
> > used modprobe-l |grep rtl
> > it gives rtl8150.ko
> > the on modprobing rtl8150  it gets loaded
> > but
> > on ifconfig there is no eth0
> >
> > what should i do ? please help
> --
> gentoo-user@gentoo.org mailing list
>
>

[-- Attachment #2: Type: text/html, Size: 1257 bytes --]

Re: [gentoo-user] Fwd: problem :eht0 not getting detected

[Dan Farrell]

On Wed, 11 Apr 2007 14:26:51 -0700
"Joshua Doll" <jdoll82981@gmail.com> wrote:


> On 4/11/07, Richard Cox <khabi@pixelatedninja.com> wrote:
> >
> > Well specifically what kind of realtek ethernet card is it.  A
> > quick count in my kernel config showed 3 different drivers for
> > realtek.  You might want to try modprobing the other ones and see
> > if that brings it up.
> >
> > On Wed, Apr 11, 2007 at 11:34:28AM -0700, agam gupta wrote:
> > > hello
> > >
> > > i have recently started with gentoo.
> > > there is a problem
> > > my eth0 is not there in ifconfig (lo is only there ) .used ispci
> > > it
> > showed
> > > realtek.
> > > used modprobe-l |grep rtl
> > > it gives rtl8150.ko
> > > the on modprobing rtl8150  it gets loaded
> > > but
> > > on ifconfig there is no eth0
> > >
> > > what should i do ? please help
> > --
> > gentoo-user@gentoo.org mailing list
> >
> what about ifconfig -a? I sometimes run into a problem where udev
> remaps the ethernet device.
> 
'ifconfig -a' will also list interfaces that haven't yet been
configured (for example, no ip address).  Just 'ifconfig' will only
list interfaces that are up.  
 -- Dan
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Fwd: problem :eht0 not getting detected

[agam gupta]

as suggested
 i tried ifconfig -a but that didint  work...



On 4/11/07, Dan Farrell <dan@spore.ath.cx> wrote:
> On Wed, 11 Apr 2007 14:26:51 -0700
> "Joshua Doll" <jdoll82981@gmail.com> wrote:
>
>
> > On 4/11/07, Richard Cox <khabi@pixelatedninja.com> wrote:
> > >
> > > Well specifically what kind of realtek ethernet card is it.  A
> > > quick count in my kernel config showed 3 different drivers for
> > > realtek.  You might want to try modprobing the other ones and see
> > > if that brings it up.
> > >
> > > On Wed, Apr 11, 2007 at 11:34:28AM -0700, agam gupta wrote:
> > > > hello
> > > >
> > > > i have recently started with gentoo.
> > > > there is a problem
> > > > my eth0 is not there in ifconfig (lo is only there ) .used ispci
> > > > it
> > > showed
> > > > realtek.
> > > > used modprobe-l |grep rtl
> > > > it gives rtl8150.ko
> > > > the on modprobing rtl8150  it gets loaded
> > > > but
> > > > on ifconfig there is no eth0
> > > >
> > > > what should i do ? please help
> > > --
> > > gentoo-user@gentoo.org mailing list
> > >
> > what about ifconfig -a? I sometimes run into a problem where udev
> > remaps the ethernet device.
> >
> 'ifconfig -a' will also list interfaces that haven't yet been
> configured (for example, no ip address).  Just 'ifconfig' will only
> list interfaces that are up.
>  -- Dan
> --
> gentoo-user@gentoo.org mailing list
>
>
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Fwd: problem :eht0 not getting detected

[Dan Farrell]

On Fri, 13 Apr 2007 21:34:05 -0700
"agam gupta" <quartzite.6.11@gmail.com> wrote:

> as suggested
>  i tried ifconfig -a but that didint  work...

have you tried other realtek drivers from the kernel yet?
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Fwd: problem :eht0 not getting detected

[agam gupta]

[-- Attachment #1: Type: text/plain, Size: 462 bytes --]

ya  there were 4 driviers but none worked tried all optons
 only rtl-8150  lods
 but is not shown in the ifconfig or ifconfig -a

 ragards
agam


On 4/13/07, Dan Farrell <dan@spore.ath.cx> wrote:
>
> On Fri, 13 Apr 2007 21:34:05 -0700
> "agam gupta" <quartzite.6.11@gmail.com> wrote:
>
> > as suggested
> >  i tried ifconfig -a but that didint  work...
>
> have you tried other realtek drivers from the kernel yet?
> --
> gentoo-user@gentoo.org mailing list
>
>

[-- Attachment #2: Type: text/html, Size: 926 bytes --]

Re: [gentoo-user] Fwd: problem :eht0 not getting detected

[Hans-Werner Hilse]

Hi,

BTW, learn about why top-posting is bad if you can spare some time...

On Fri, 13 Apr 2007 21:54:56 -0700
"agam gupta" <quartzite.6.11@gmail.com> wrote:

> ya  there were 4 driviers but none worked tried all optons
>  only rtl-8150  lods
>  but is not shown in the ifconfig or ifconfig -a

does it output something to the kernel log buffer (run dmesg!)? What is
the exact output of lspci? Are you talking about a wireless card?
Ethernet? You didn't provide anything near enough information...

-hwh
-- 
gentoo-user@gentoo.org mailing list