From: Sergio Polini <sp_rm_it@yahoo.it>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] OT: wlan0 is sssloooow
Date: Mon, 27 Nov 2006 20:27:41 +0100 [thread overview]
Message-ID: <200611272027.41292.sp_rm_it@yahoo.it> (raw)
In-Reply-To: <7573e9640611261436i7d1e73bfl6b367e0203484992@mail.gmail.com>
Richard Fish:
> On 11/26/06, Sergio Polini <sp_rm_it@yahoo.it> wrote:
> > My pings (perhaps all DNS lookups) are slow even if connect my PC
> > to both the wireless router and the cable, i.e. when there are
> > both a "fast" (metric 0) and a "slow" (metric 2000) interface.
> >
> > > What do "ifconfig wlan" and "iwconfig wlan" report for the fast
> > > and slow states?
> >
> > Fast (i.e. normal ;-) state happens only when net.wlan0 is
> > stopped. When I start net.wlan0:
>
> Are both wired and wireless enabled? Your original posting doesn't
> show any records for eth0. In the 'slow' state, what is the output
> of 'ifconfig -a' and route?
Hi Richard!
Here are three cases.
Cases #1 - Cold boot, only wire enabled
sergio ~ # ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:16:D3:09:2D:17
inet addr:XX.XXX.XXX.250 Bcast:255.255.255.255 Mask:255.255.248.0
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1728 errors:0 dropped:0 overruns:0 frame:0
TX packets:1408 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:917612 (896.1 Kb) TX bytes:165737 (161.8 Kb)
Interrupt:16
gre0 Link encap:UNSPEC
HWaddr 00-00-00-00-00-00-CF-A2-00-00-00-00-00-00-00-00
NOARP MTU:1476 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:19 errors:0 dropped:0 overruns:0 frame:0
TX packets:19 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1119 (1.0 Kb) TX bytes:1119 (1.0 Kb)
sergio ~ # route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
23.252.112.0 * 255.255.248.0 U 0 0 0 eth0
loopback * 255.0.0.0 U 0 0 0 lo
default 23.252.112.1 0.0.0.0 UG 0 0 0 eth0
NB: gre0 should be there because of an error in my kernel .config:
CONFIG_NET_IPGRE=y
;-)
--
gentoo-user@gentoo.org mailing list
next prev parent reply other threads:[~2006-11-27 19:34 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-26 15:48 [gentoo-user] OT: wlan0 is sssloooow Sergio Polini
2006-11-26 19:59 ` Richard Fish
2006-11-26 21:35 ` Sergio Polini
2006-11-26 22:08 ` [gentoo-user] Screen(s) found, but none have a usable configuration burmata
2006-11-26 22:31 ` Richard Fish
2006-11-27 5:32 ` burmata
2006-11-26 22:36 ` [gentoo-user] OT: wlan0 is sssloooow Richard Fish
2006-11-27 19:27 ` Sergio Polini [this message]
2006-11-27 19:28 ` Sergio Polini
2006-11-27 21:04 ` Sergio Polini
2006-11-27 21:48 ` Hans de Hartog
2006-11-27 22:54 ` Richard Fish
2006-11-28 21:53 ` [gentoo-user] OT: wlan0 is sssloooow [99% SOLVED] Sergio Polini
2006-12-11 20:56 ` [gentoo-user] OT: wlan0 is sssloooow [100% SOLVED] Sergio Polini
2006-12-12 8:15 ` Mick
2006-12-12 21:03 ` Sergio Polini
2006-12-12 9:08 ` Alan McKinnon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200611272027.41292.sp_rm_it@yahoo.it \
--to=sp_rm_it@yahoo.it \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox