public inbox for gentoo-user@lists.gentoo.org
 help / color / mirror / Atom feed
From: Luigi Pinna <mailing-gentoo@sailorferris.com>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] wireless on boot
Date: Tue, 7 Nov 2006 20:35:07 +0100	[thread overview]
Message-ID: <200611072035.12569.mailing-gentoo@sailorferris.com> (raw)
In-Reply-To: <20061104194451.225cc8c4@krikkit.digimed.co.uk>

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Alle 20:44, sabato 4 novembre 2006, Neil Bothwick ha scritto:
> On Sat, 4 Nov 2006 13:53:39 +0100, Luigi Pinna wrote:
> > But I continue to have some problems...
> > First, on boot time net.eth0 gives up and I must wait until timeout
> > before that boot could continue.
>
> emerge ifplugd and read the comments about it in
> /etc/conf.d/net.example

Sorry I answer only now: I was not here!
Your command works good, now in boot time I don't wait about net.eth0
but net.wlan0 and net.eth0 seem not active, but the wireless works.
I found that my connection is not still stable.
dmesg is full from this kind of messagges:
zd1211:Mixed Mode
wlan0: Configured authentication algorithms:  Open system
wlan0: Drop encrypted: enabled
zd1211:Switch to Infra mode
zd1211:Mixed Mode
wlan0: WPA version:  WPA
wlan0: pairwise cipher:  TKIP
wlan0: group cipher:  TKIP
wlan0: key mgmt:  PSK
wlan0: privacy: enabled
wlan0: Allow Rx unencrypted EAPOL: disabled
zd1211:STA_ASSOCIATED with 00:15:0c:24:bd:22
zd1211:Notify_join_event:00:15:0c:24:bd:22
zd1211:Mixed Mode
zd1211:STA_ASSOCIATED with 00:15:0c:24:bd:22
******We Lose AP for 5 seconds
zd1211:zd1205_dis_connect
zd1205_notify_disjoin_event
wlan0: Configured authentication algorithms:  Open system
wlan0: Drop encrypted: enabled
zd1211:Switch to Infra mode
zd1211:Mixed Mode
wlan0: WPA version:  WPA
wlan0: pairwise cipher:  TKIP
wlan0: group cipher:  TKIP
wlan0: key mgmt:  PSK
wlan0: privacy: enabled
wlan0: Allow Rx unencrypted EAPOL: disabled
zd1211:Mixed Mode
zd1211:STA_ASSOCIATED with 00:15:0c:24:bd:22
zd1211:Notify_join_event:00:15:0c:24:bd:22

And after same time (very irregular days or hours), I lose the signal 
but nothing notices it.
I can solve with 2 simple command: rmmod zd1211b and modprobe zd1211b
When I put on the module again, dhcpcd recognizes it and start a new 
connection.
What is wrong in my configuration? 
My /etc/wpa_supplicant .conf is:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
eapol_version=1
ap_scan=1
network={
ssid="MySSID"
proto=WPA
key_mgmt=WPA-PSK
pairwise=TKIP
group=CCMP TKIP WEP104 WEP40
psk="MyPassword"
priority=2
}
fast_reauth=1

Thanks,
Luigi
- -- 
Public key GPG(0x633F86B7) on hkp://keyserver.linux.it/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)

iD8DBQFFUN/wHmkkjmM/hrcRAuwhAKCJukCsTF6mbEawidfragFRzQz9nwCgmFb1
dkGVCGE5/sSmnjYdq4t5CUY=
=YxJp
-----END PGP SIGNATURE-----
-- 
gentoo-user@gentoo.org mailing list



  reply	other threads:[~2006-11-07 19:41 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-11-01 14:47 [gentoo-user] wireless on boot Luigi Pinna
2006-11-02 18:54 ` Mick
2006-11-04 12:53   ` Luigi Pinna
2006-11-04 19:44     ` Neil Bothwick
2006-11-07 19:35       ` Luigi Pinna [this message]
2006-11-08 13:24         ` Mick

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200611072035.12569.mailing-gentoo@sailorferris.com \
    --to=mailing-gentoo@sailorferris.com \
    --cc=gentoo-user@lists.gentoo.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox