From: Mick <michaelkintzios@gmail.com>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Re: amd64 installation: which file system?
Date: Wed, 19 Jul 2006 08:14:45 +0100 [thread overview]
Message-ID: <200607190814.58655.michaelkintzios@gmail.com> (raw)
In-Reply-To: <loom.20060719T061438-669@post.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 3188 bytes --]
On Wednesday 19 July 2006 05:31, James wrote:
> Yes HP is one of them. Purchased the system through Office Depot.
> Will not make this mistake again.
In the UK at least HP sell refurbished and slightly obsolete components with
one year warranty on ebay. If you bid when the footy, Wimbledon, etc., is on
the telly you can get a pretty descent box for a relatively low price. Of
course, there's morons who keep outbidding themselves and push up prices for
everyone else . . . but even so it's worth looking into it. Buying HP_Compaq
from a shop is an absolute no-no, unless they're throwing the darn things
out. It occasionally happens, but not that often. Unfortunately, with a low
price comes the 'compaqified' installation image. The best solution that I
have found is to shrink the partition with gparted *before* the machine is
ever booted up and image this smaller partition onto a DVD - should you ever
want to resell the computer.
>
> > If these are new systems, I would give HP support a call and demand
> > they send you the WinXP OEM installation CD.
They will. But at a price (not much) and guess what, it is an image of the
original installation which as far as I recall requires the whole of the disk
for it to be installed again! Can you believe them!
> After blowing away the NTFS (XP) stuff via reformatting. I'm going to
> see if I can install/restore XP from the backup partition to
> the newly reduced 30Meg partition.
Surprise me if this works
> If HP forces me to choose between gentoo and XP, by_by XP.
>
> Yes I know the 10.6 gig of XP will fit, what I was looking for
> is an opinion on blowing away the orginal XP on the 85 gig partition,
> reformatting with several new partitions for Gentoo and XP and using
> the XP restore from the 9 gig partition as the end of the drive, where
> the HP-XP restore software is located.
Surprise me again for the reasons mentioned above. I believe that it will
either overwrite the partitions you've created or bomb out with an error.
> If nobody posts a better idea by tomorrow morning, it's by by XP.....
I have been successful with a number of 32bit HP-Compaq machines by doing the
following:
Boot into WinXP and uninstall all system software and applications (e.g.
Windoze IM, Outlook Express, etc.) that you do not need. Refrag the machine
using the native defrag application from the Administrative Tools. Reboot
<--> defrag. Repeat the cycle of rebooting and defragging a couple more
times until there is no discernible fragmentation. Use gparted to resize the
partition and create new as required. So far I had no failures, although on
some older machines with low memory the shrinking can take absolute ages (it
doesn't fail, just takes forever).
> > > Is there any free download software (even if it's a binary) to
> > > defrag this ntfs partition, for an amd64 ? Googling for
> > > {O&ODefrag +amd64 } does not produce anything useful.
Please forgive me if I have missed a critical point in this thread - why does
it have to be 64bit? Won't the WinXP 32bit defrag tool do the job?
--
Regards,
Mick
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
next prev parent reply other threads:[~2006-07-19 8:07 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-17 17:48 [gentoo-user] amd64 installation questions James
[not found] ` <loom.20060718T232824-746@post.gmane.org>
2006-07-18 22:01 ` [gentoo-user] Re: amd64 installation: which file system? Richard Fish
2006-07-18 22:12 ` James
2006-07-18 23:31 ` Neil Bothwick
2006-07-18 23:38 ` Richard Fish
2006-07-19 0:25 ` Dale
[not found] ` <44BD7DCA.2060903@gentoo.org>
2006-07-19 0:57 ` Richard Fish
2006-07-19 7:56 ` Mick
2006-07-19 8:23 ` Richard Fish
2006-07-19 10:08 ` Mick
2006-07-19 1:13 ` Cliff Wells
2006-07-19 1:32 ` Donnie Berkholz
2006-07-19 2:20 ` Alan E. Davis
2006-07-19 10:44 ` Neil Bothwick
2006-07-20 10:37 ` Cliff Wells
2006-07-20 11:01 ` Cliff Wells
2006-07-20 18:14 ` Richard Fish
[not found] ` <1153427464.3839.155.camel@devilbox>
2006-07-20 21:53 ` Richard Fish
2006-07-19 1:21 ` Dale
2006-07-19 1:26 ` James
2006-07-19 2:57 ` Richard Fish
2006-07-19 4:31 ` James
2006-07-19 7:14 ` Mick [this message]
2006-07-29 13:30 ` Bo Ørsted Andresen
2006-07-29 13:18 ` Bo Ørsted Andresen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200607190814.58655.michaelkintzios@gmail.com \
--to=michaelkintzios@gmail.com \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox