* [gentoo-user] OT - GLSlideshow and nvidia (I think)
@ 2006-07-16 14:24 Michael Sullivan
2006-07-16 14:43 ` [gentoo-user] OT - GLSlideshow and nvidia (I think) (no it is sis) Hemmann, Volker Armin
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Michael Sullivan @ 2006-07-16 14:24 UTC (permalink / raw
To: gentoo-user
Since the upgrade to modular X my wife has not been able to view her
favourite screesaver (our cats.) Whenever she runs the GLSlideshow
screensaver, she gets the following error:
Xlib extension GLX missing on display ":0.0"
glslideshow display :0.0 does not support the GLX extension
I googled for this error and everywhere I looked people were fixing this
error by installing proper nvidia modules. My problem is that I know
nothing about nvidia or even device drivers in general. Do I need to
compile nvidia drivers into her kernel? If so, which ones? Here's the
lspci output from her computer:
catherine X11 # lspci -v
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 741/741GX/M741
Host (rev 03)
Subsystem: Elitegroup Computer Systems Unknown device 1b13
Flags: bus master, medium devsel, latency 32
Memory at d0000000 (32-bit, non-prefetchable) [size=128M]
Capabilities: [c0] AGP version 3.5
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port
(virtual PCI-to-PCI bridge) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e1000000-e10fffff
Prefetchable memory behind bridge: d8000000-dfffffff
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL
Media IO] (rev 36)
Flags: bus master, medium devsel, latency 0
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev
01) (prog-if 80 [Master])
Subsystem: Elitegroup Computer Systems Unknown device 1b13
Flags: bus master, medium devsel, latency 128, IRQ 16
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at 4000 [size=16]
Capabilities: [58] Power Management version 2
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS]
AC'97 Sound Controller (rev a0)
Subsystem: Elitegroup Computer Systems Unknown device 1b13
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at e000 [size=256]
I/O ports at e400 [size=128]
Capabilities: [48] Power Management version 2
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Unknown device 1b13
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at e1104000 (32-bit, non-prefetchable) [size=4K]
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Unknown device 1b13
Flags: bus master, medium devsel, latency 32, IRQ 19
Memory at e1100000 (32-bit, non-prefetchable) [size=4K]
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Unknown device 1b13
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at e1101000 (32-bit, non-prefetchable) [size=4K]
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0
Controller (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Unknown device 1b13
Flags: bus master, medium devsel, latency 32, IRQ 17
Memory at e1102000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI
Fast Ethernet (rev 91)
Subsystem: Elitegroup Computer Systems Unknown device 1b13
Flags: bus master, medium devsel, latency 32, IRQ 22
I/O ports at e800 [size=256]
Memory at e1103000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 10000000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
661/741/760/761 PCI/AGP VGA Display Adapter (prog-if 00 [VGA])
Subsystem: Elitegroup Computer Systems Unknown device 1b13
Flags: 66MHz, medium devsel, IRQ 10
BIST result: 00
Memory at d8000000 (32-bit, prefetchable) [size=128M]
Memory at e1000000 (32-bit, non-prefetchable) [size=128K]
I/O ports at d000 [size=128]
Capabilities: [40] Power Management version 2
Capabilities: [50] AGP version 3.0
Please help!
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] OT - GLSlideshow and nvidia (I think) (no it is sis)
2006-07-16 14:24 [gentoo-user] OT - GLSlideshow and nvidia (I think) Michael Sullivan
@ 2006-07-16 14:43 ` Hemmann, Volker Armin
2006-07-16 15:36 ` Michael Sullivan
2006-07-16 17:57 ` [gentoo-user] OT - GLSlideshow and nvidia (I think) Richard Fish
2006-07-17 6:22 ` Schleimer, Ben
2 siblings, 1 reply; 10+ messages in thread
From: Hemmann, Volker Armin @ 2006-07-16 14:43 UTC (permalink / raw
To: gentoo-user
On Sunday 16 July 2006 16:24, Michael Sullivan wrote:
> Since the upgrade to modular X my wife has not been able to view her
> favourite screesaver (our cats.) Whenever she runs the GLSlideshow
> screensaver, she gets the following error:
>
>
> Xlib extension GLX missing on display ":0.0"
>
> glslideshow display :0.0 does not support the GLX extension
glxinfo
/etc/X11/xorg.conf
dmesg
eselect opengl list
is usually the minimum information needed. Because the vendor recalled the
magic crystal balls some weeks ago.
You don't have any nvidia stuff.
You have sis integrated graphic. So you need sis support in the kernel.
make menuconfig
--->Device Drivers
---->Character Devices
Turn on AGP for sis chipsets. Turn on dri support. Install
x11-drivers/xf86-video-sis
install
x11-misc/sisctrl
use google. Search for sis integrated graphics and xorg. There are lots of
examples (can't help here, don't have sis integrated graphics.
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] OT - GLSlideshow and nvidia (I think) (no it is sis)
2006-07-16 14:43 ` [gentoo-user] OT - GLSlideshow and nvidia (I think) (no it is sis) Hemmann, Volker Armin
@ 2006-07-16 15:36 ` Michael Sullivan
2006-07-16 16:38 ` Hemmann, Volker Armin
0 siblings, 1 reply; 10+ messages in thread
From: Michael Sullivan @ 2006-07-16 15:36 UTC (permalink / raw
To: gentoo-user
On Sun, 2006-07-16 at 16:43 +0200, Hemmann, Volker Armin wrote:
> On Sunday 16 July 2006 16:24, Michael Sullivan wrote:
> > Since the upgrade to modular X my wife has not been able to view her
> > favourite screesaver (our cats.) Whenever she runs the GLSlideshow
> > screensaver, she gets the following error:
> >
> >
> > Xlib extension GLX missing on display ":0.0"
> >
> > glslideshow display :0.0 does not support the GLX extension
>
> glxinfo
> /etc/X11/xorg.conf
> dmesg
> eselect opengl list
> is usually the minimum information needed. Because the vendor recalled the
> magic crystal balls some weeks ago.
>
> You don't have any nvidia stuff.
>
> You have sis integrated graphic. So you need sis support in the kernel.
>
> make menuconfig
>
> --->Device Drivers
>
> ---->Character Devices
>
> Turn on AGP for sis chipsets. Turn on dri support. Install
> x11-drivers/xf86-video-sis
> install
> x11-misc/sisctrl
>
> use google. Search for sis integrated graphics and xorg. There are lots of
> examples (can't help here, don't have sis integrated graphics.
I searched google for "sis integrated graphics, xorg" and it pulled up a
lot of information, but I don't know exactly what I'm looking for. I
turned on /dev/agpgart for SIS and DRI in the kernel and rebooted with
it. I installed xf86-video-sis and sisctrl. sisctrl didn't work the
way I expected:
catherine ~ # modprobe --list | grep 'sis'
/lib/modules/2.6.16-gentoo-r13/kernel/drivers/scsi/sata_sis.ko
/lib/modules/2.6.16-gentoo-r13/kernel/drivers/net/sis900.ko
catherine ~ # modprobe sata_sis
catherine ~ # modprobe sis900
catherine ~ # modprobe glx
FATAL: Module glx not found.
catherine ~ # modprobe --list | grep 'glx'
catherine ~ # sisctrl
SiS video adaptor not found
This program is for SiS 300, 315 and 330 series only
and requires the Xv (XVideo) extension.
catherine ~ #
Here's the other info:
catherine ~ # glxinfo
name of display: localhost:10.0
Xlib: extension "GLX" missing on display "localhost:10.0".
Xlib: extension "GLX" missing on display "localhost:10.0".
Xlib: extension "GLX" missing on display "localhost:10.0".
Error: couldn't find RGB GLX visual
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
Xlib: extension "GLX" missing on display "localhost:10.0".
Xlib: extension "GLX" missing on display "localhost:10.0".
0x21 16 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display "localhost:10.0".
Xlib: extension "GLX" missing on display "localhost:10.0".
0x22 16 dc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
catherine ~ # cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
Load "extmod"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "glx"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mouse0"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
#DisplaySize 280 210 # mm
Identifier "Monitor0"
VendorName "SNY"
ModelName "650"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "TurboQueue" # [<bool>]
#Option "FastVram" # [<bool>]
#Option "NoHostBus" # [<bool>]
#Option "RenderAcceleration" # [<bool>]
#Option "ForceCRT1Type" # <str>
#Option "ForceCRT2Type" # <str>
#Option "YPbPrAspectRatio" # <str>
#Option "ShadowFB" # [<bool>]
#Option "DRI" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "Rotate" # <str>
#Option "NoXvideo" # [<bool>]
#Option "Vesa" # [<bool>]
#Option "MaxXFBMem" # <i>
#Option "ForceCRT1" # [<bool>]
#Option "XvOnCRT2" # [<bool>]
#Option "PanelDelayCompensation" # <i>
#Option "PanelDelayCompensation1" # <i>
#Option "PDC" # <i>
#Option "PDC1" # <i>
#Option "EMI" # <i>
#Option "LVDSHL" # <i>
#Option "SpecialTiming" # <str>
#Option "TVStandard" # <str>
#Option "UseROMData" # [<bool>]
#Option "NoInternalModes" # [<bool>]
#Option "UseOEMData" # [<bool>]
#Option "NoYV12" # [<bool>]
#Option "CHTVType" # [<bool>]
#Option "CHTVOverscan" # [<bool>]
#Option "CHTVSuperOverscan" # [<bool>]
#Option "CHTVLumaBandwidthCVBS" # <i>
#Option "CHTVLumaBandwidthSVIDEO" # <i>
#Option "CHTVLumaFlickerFilter" # <i>
#Option "CHTVChromaBandwidth" # <i>
#Option "CHTVChromaFlickerFilter" # <i>
#Option "CHTVCVBSColor" # [<bool>]
#Option "CHTVTextEnhance" # <i>
#Option "CHTVContrast" # <i>
#Option "SISTVEdgeEnhance" # <i>
#Option "SISTVAntiFlicker" # <str>
#Option "SISTVSaturation" # <i>
#Option "SISTVCFilter" # [<bool>]
#Option "SISTVYFilter" # <i>
#Option "SISTVColorCalibFine" # <i>
#Option "SISTVColorCalibCoarse" # <i>
#Option "SISTVXScale" # <i>
#Option "SISTVYScale" # <i>
#Option "TVXPosOffset" # <i>
#Option "TVYPosOffset" # <i>
#Option "SIS6326TVAntiFlicker" # <str>
#Option "SIS6326TVEnableYFilter" # [<bool>]
#Option "SIS6326TVYFilterStrong" # [<bool>]
#Option "SIS6326TVForcePlug" # <str>
#Option "SIS6326FSCAdjust" # <i>
#Option "UseColorHWCursor" # [<bool>]
#Option "ColorHWCursorBlending" # [<bool>]
#Option "ColorHWCursorBlendThreshold" # <i>
#Option "RestoreBySetMode" # [<bool>]
#Option "NoCRT2Detection" # [<bool>]
#Option "ForceCRT2ReDetection" # [<bool>]
#Option "SenseYPbPr" # [<bool>]
#Option "CRT1Gamma" # [<bool>]
#Option "CRT2Gamma" # [<bool>]
#Option "StoredGammaBrightness" # <str>
#Option "StoredGammaPreBrightness" # <str>
#Option "XvGamma" # <str>
#Option "XvDefaultContrast" # <i>
#Option "XvDefaultBrightness" # <i>
#Option "XvDefaultHue" # <i>
#Option "XvDefaultSaturation" # <i>
#Option "XvDefaultDisableGfx" # [<bool>]
#Option "XvDefaultDisableGfxLR" # [<bool>]
#Option "XvChromaMin" # <i>
#Option "XvChromaMax" # <i>
#Option "XvUseChromaKey" # [<bool>]
#Option "XvInsideChromaKey" # [<bool>]
#Option "XvYUVChromaKey" # [<bool>]
#Option "XvDisableColorKey" # [<bool>]
#Option "XvUseMemcpy" # [<bool>]
#Option "XvDefaultAdaptor" # <str>
#Option "ScaleLCD" # [<bool>]
#Option "CenterLCD" # [<bool>]
#Option "EnableHotkey" # [<bool>]
#Option "EnableSiSCtrl" # [<bool>]
#Option "OverruleFrequencyRanges" # [<bool>]
#Option "MergedFB" # [<bool>]
#Option "TwinView" # [<bool>]
#Option "MergedFBAuto" # [<bool>]
#Option "CRT2HSync" # <str>
#Option "SecondMonitorHorizSync" # <str>
#Option "CRT2VRefresh" # <str>
#Option "SecondMonitorVertRefresh" # <str>
#Option "CRT2Position" # <str>
#Option "TwinViewOrientation" # <str>
#Option "MetaModes" # <str>
#Option "MergedDPI" # <str>
#Option "NoMergedXinerama" # [<bool>]
#Option "NoTwinviewXineramaInfo" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
Identifier "Card0"
Driver "sis"
VendorName "Silicon Integrated Systems [SiS]"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600"
EndSubSection
EndSection
catherine ~ #
catherine ~ # dmesg
Linux version 2.6.16-gentoo-r13 (root@catherine) (gcc version 3.4.6
(Gentoo 3.4.6-r1, ssp-3.4.5-1.0, pie-8.7.9)) #1 SMP Sun Jul 16 10:05:57
CDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS)
BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
223MB LOWMEM available.
found SMP MP-table at 000f57a0
On node 0 totalpages: 57328
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 53232 pages, LIFO batch:15
HighMem zone: 0 pages, LIFO batch:0
DMI 2.2 present.
ACPI: RSDP (v000 AWARD ) @ 0x000f7170
ACPI: RSDT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x0dff3000
ACPI: FADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x0dff3040
ACPI: MADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x0dff69c0
ACPI: DSDT (v001 AWARD AWRDACPI 0x00001000 MSFT 0x0100000e) @
0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 10000000 (gap: 0e000000:f0c00000)
Built 1 zonelists
Kernel command line: real_root=/dev/hdc6
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 1662.773 MHz processor.
Using tsc for high-res timesource
Speakup v-2.00 CVS: Wed Dec 21 14:36:03 EST 2005 : initialized
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 221236k/229312k available (2360k kernel code, 7568k reserved,
572k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay using timer specific routine.. 3329.12 BogoMIPS
(lpj=6658245)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000
00000000 00000000Checking 'hlt' instruction... OK.
CPU0: AMD Sempron(tm) 2400+ stepping 01
Total of 1 processors activated (3329.12 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 1893k freed
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: e1000000-e10fffff
PREFETCH window: d8000000-dfffffff
squashfs: version 3.0 (2006/03/15) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block numbers,
no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered (default)
initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 )
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected SiS 741 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
[drm] Initialized drm 1.0.1 20051102
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
mice: PS/2 mouse device common for all mice
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 16
SIS5513: chipset revision 1
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard as /class/input/input0
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
hda: LITE-ON COMBO SOHC-5236V, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: WDC WD800BB-00JHC0, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 128KiB
hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63,
UDMA(33)
hdc: cache flushes supported
hdc: hdc1 hdc2 hdc3 < hdc5 hdc6 >
hda: ATAPI 52X DVD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
CAPI Subsystem Rev 1.1.2.8
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 4
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 196k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 17
ehci_hcd 0000:00:03.3: EHCI Host Controller
PCI: cache line size of 64 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: irq 17, io mem 0xe1102000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v2.3
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver
(PCI)
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 18
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 18, io mem 0xe1104000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 19
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 19, io mem 0xe1100000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 20, io mem 0xe1101000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
ieee1394: Initialized config rom entry `ip1394'
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
libata version 1.20 loaded.
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
ReiserFS: hdc6: warning: sh-2021: reiserfs_fill_super: can not find
reiserfs on hdc6
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 497972k swap on /dev/hdc5. Priority:-1 extents:1 across:497972k
EXT3 FS on hdc6, internal journal
Real Time Clock Driver v1.12ac
sis900.c: v1.08.09 Sep. 19 2005
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 21
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xe800, IRQ 21, 00:11:5b:84:60:3b.
FDC 0 is a post-1991 82077
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
eth0: Media Link On 100mbps full-duplex
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
catherine ~ #
catherine ~ # eselect opengl list
Available OpenGL implementations:
[1] xorg-x11 *
catherine ~ #
I apologize for the length of this email, but I really don't know what
to do next to fix this problem. Thank you for your help.
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] OT - GLSlideshow and nvidia (I think) (no it is sis)
2006-07-16 15:36 ` Michael Sullivan
@ 2006-07-16 16:38 ` Hemmann, Volker Armin
2006-07-17 14:16 ` Michael Sullivan
0 siblings, 1 reply; 10+ messages in thread
From: Hemmann, Volker Armin @ 2006-07-16 16:38 UTC (permalink / raw
To: gentoo-user
On Sunday 16 July 2006 17:36, Michael Sullivan wrote:
> On Sun, 2006-07-16 at 16:43 +0200, Hemmann, Volker Armin wrote:
> > On Sunday 16 July 2006 16:24, Michael Sullivan wrote:
> > > Since the upgrade to modular X my wife has not been able to view her
> > > favourite screesaver (our cats.) Whenever she runs the GLSlideshow
> > > screensaver, she gets the following error:
> > >
> > >
> > > Xlib extension GLX missing on display ":0.0"
> > >
> > > glslideshow display :0.0 does not support the GLX extension
> >
> > glxinfo
> > /etc/X11/xorg.conf
> > dmesg
> > eselect opengl list
> > is usually the minimum information needed. Because the vendor recalled
> > the magic crystal balls some weeks ago.
> >
> > You don't have any nvidia stuff.
> >
> > You have sis integrated graphic. So you need sis support in the kernel.
> >
> > make menuconfig
> >
> > --->Device Drivers
> >
> > ---->Character Devices
> >
> > Turn on AGP for sis chipsets. Turn on dri support. Install
> > x11-drivers/xf86-video-sis
> > install
> > x11-misc/sisctrl
> >
> > use google. Search for sis integrated graphics and xorg. There are lots
> > of examples (can't help here, don't have sis integrated graphics.
>
> I searched google for "sis integrated graphics, xorg" and it pulled up a
> lot of information, but I don't know exactly what I'm looking for. I
> turned on /dev/agpgart for SIS and DRI in the kernel and rebooted with
> it. I installed xf86-video-sis and sisctrl. sisctrl didn't work the
> way I expected:
>
> catherine ~ # modprobe --list | grep 'sis'
> /lib/modules/2.6.16-gentoo-r13/kernel/drivers/scsi/sata_sis.ko
> /lib/modules/2.6.16-gentoo-r13/kernel/drivers/net/sis900.ko
> catherine ~ # modprobe sata_sis
> catherine ~ # modprobe sis900
> catherine ~ # modprobe glx
you don't modprobe glx. It is a Xorg module, not a kernel module.
> FATAL: Module glx not found.
that is correct.
> catherine ~ # modprobe --list | grep 'glx'
this too ;)
> catherine ~ # sisctrl
> SiS video adaptor not found
> This program is for SiS 300, 315 and 330 series only
> and requires the Xv (XVideo) extension.
do you have libXv installed?
>
> Identifier "Card0"
> Driver "sis"
> VendorName "Silicon Integrated Systems [SiS]"
> BoardName "Unknown Board"
> BusID "PCI:1:0:0"
did you create that entry or a config app?
do you have the dri-useflag set?
maybe this helps you:
http://www.winischhofer.eu/linuxsisvga.shtml
(the 6XX chipsets and the 7XX chipsets are more or less identical. 6=intel,
7=amd)
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] OT - GLSlideshow and nvidia (I think)
2006-07-16 14:24 [gentoo-user] OT - GLSlideshow and nvidia (I think) Michael Sullivan
2006-07-16 14:43 ` [gentoo-user] OT - GLSlideshow and nvidia (I think) (no it is sis) Hemmann, Volker Armin
@ 2006-07-16 17:57 ` Richard Fish
2006-07-16 18:08 ` Michael Sullivan
2006-07-17 6:22 ` Schleimer, Ben
2 siblings, 1 reply; 10+ messages in thread
From: Richard Fish @ 2006-07-16 17:57 UTC (permalink / raw
To: gentoo-user
On 7/16/06, Michael Sullivan <michael@espersunited.com> wrote:
> Since the upgrade to modular X my wife has not been able to view her
> favourite screesaver (our cats.) Whenever she runs the GLSlideshow
> screensaver, she gets the following error:
>
>
> Xlib extension GLX missing on display ":0.0"
>
> glslideshow display :0.0 does not support the GLX extension
Are you loading the glx module in your xorg.conf?
Section "Module"
...
Load "glx"
-Richard
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] OT - GLSlideshow and nvidia (I think)
2006-07-16 17:57 ` [gentoo-user] OT - GLSlideshow and nvidia (I think) Richard Fish
@ 2006-07-16 18:08 ` Michael Sullivan
0 siblings, 0 replies; 10+ messages in thread
From: Michael Sullivan @ 2006-07-16 18:08 UTC (permalink / raw
To: gentoo-user
On Sun, 2006-07-16 at 10:57 -0700, Richard Fish wrote:
> On 7/16/06, Michael Sullivan <michael@espersunited.com> wrote:
> > Since the upgrade to modular X my wife has not been able to view her
> > favourite screesaver (our cats.) Whenever she runs the GLSlideshow
> > screensaver, she gets the following error:
> >
> >
> > Xlib extension GLX missing on display ":0.0"
> >
> > glslideshow display :0.0 does not support the GLX extension
>
>
> Are you loading the glx module in your xorg.conf?
>
> Section "Module"
> ...
> Load "glx"
>
> -Richard
Yes:
Section "Module"
Load "extmod"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "glx"
Load "type1"
Load "freetype"
EndSection
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] OT - GLSlideshow and nvidia (I think)
2006-07-16 14:24 [gentoo-user] OT - GLSlideshow and nvidia (I think) Michael Sullivan
2006-07-16 14:43 ` [gentoo-user] OT - GLSlideshow and nvidia (I think) (no it is sis) Hemmann, Volker Armin
2006-07-16 17:57 ` [gentoo-user] OT - GLSlideshow and nvidia (I think) Richard Fish
@ 2006-07-17 6:22 ` Schleimer, Ben
2006-07-17 14:21 ` Michael Sullivan
2 siblings, 1 reply; 10+ messages in thread
From: Schleimer, Ben @ 2006-07-17 6:22 UTC (permalink / raw
To: gentoo-user
What does your /var/log/Xorg.0.log read?
Does it actually load the glx extension or fail for
some reason?
Also, double check that you are using the opengl
use-flag. I think it enables mesa since your video
card doesn;t support גרן.
Good luck
Ben
--- Michael Sullivan <michael@espersunited.com> wrote:
> Since the upgrade to modular X my wife has not been
> able to view her
> favourite screesaver (our cats.) Whenever she runs
> the GLSlideshow
> screensaver, she gets the following error:
>
>
> Xlib extension GLX missing on display ":0.0"
>
> glslideshow display :0.0 does not support the GLX
> extension
>
> I googled for this error and everywhere I looked
> people were fixing this
> error by installing proper nvidia modules. My
> problem is that I know
> nothing about nvidia or even device drivers in
> general. Do I need to
> compile nvidia drivers into her kernel? If so,
> which ones? Here's the
> lspci output from her computer:
>
> catherine X11 # lspci -v
> 00:00.0 Host bridge: Silicon Integrated Systems
> [SiS] 741/741GX/M741
> Host (rev 03)
> Subsystem: Elitegroup Computer Systems
> Unknown device 1b13
> Flags: bus master, medium devsel, latency 32
> Memory at d0000000 (32-bit,
> non-prefetchable) [size=128M]
> Capabilities: [c0] AGP version 3.5
>
> 00:01.0 PCI bridge: Silicon Integrated Systems [SiS]
> SiS AGP Port
> (virtual PCI-to-PCI bridge) (prog-if 00 [Normal
> decode])
> Flags: bus master, 66MHz, fast devsel,
> latency 99
> Bus: primary=00, secondary=01,
> subordinate=01, sec-latency=32
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: e1000000-e10fffff
> Prefetchable memory behind bridge:
> d8000000-dfffffff
>
> 00:02.0 ISA bridge: Silicon Integrated Systems [SiS]
> SiS964 [MuTIOL
> Media IO] (rev 36)
> Flags: bus master, medium devsel, latency 0
>
> 00:02.5 IDE interface: Silicon Integrated Systems
> [SiS] 5513 [IDE] (rev
> 01) (prog-if 80 [Master])
> Subsystem: Elitegroup Computer Systems
> Unknown device 1b13
> Flags: bus master, medium devsel, latency
> 128, IRQ 16
> I/O ports at <unassigned>
> I/O ports at <unassigned>
> I/O ports at <unassigned>
> I/O ports at <unassigned>
> I/O ports at 4000 [size=16]
> Capabilities: [58] Power Management version
> 2
>
> 00:02.7 Multimedia audio controller: Silicon
> Integrated Systems [SiS]
> AC'97 Sound Controller (rev a0)
> Subsystem: Elitegroup Computer Systems
> Unknown device 1b13
> Flags: bus master, medium devsel, latency
> 32, IRQ 21
> I/O ports at e000 [size=256]
> I/O ports at e400 [size=128]
> Capabilities: [48] Power Management version
> 2
>
> 00:03.0 USB Controller: Silicon Integrated Systems
> [SiS] USB 1.0
> Controller (rev 0f) (prog-if 10 [OHCI])
> Subsystem: Elitegroup Computer Systems
> Unknown device 1b13
> Flags: bus master, medium devsel, latency
> 32, IRQ 18
> Memory at e1104000 (32-bit,
> non-prefetchable) [size=4K]
>
> 00:03.1 USB Controller: Silicon Integrated Systems
> [SiS] USB 1.0
> Controller (rev 0f) (prog-if 10 [OHCI])
> Subsystem: Elitegroup Computer Systems
> Unknown device 1b13
> Flags: bus master, medium devsel, latency
> 32, IRQ 19
> Memory at e1100000 (32-bit,
> non-prefetchable) [size=4K]
>
> 00:03.2 USB Controller: Silicon Integrated Systems
> [SiS] USB 1.0
> Controller (rev 0f) (prog-if 10 [OHCI])
> Subsystem: Elitegroup Computer Systems
> Unknown device 1b13
> Flags: bus master, medium devsel, latency
> 32, IRQ 20
> Memory at e1101000 (32-bit,
> non-prefetchable) [size=4K]
>
> 00:03.3 USB Controller: Silicon Integrated Systems
> [SiS] USB 2.0
> Controller (prog-if 20 [EHCI])
> Subsystem: Elitegroup Computer Systems
> Unknown device 1b13
> Flags: bus master, medium devsel, latency
> 32, IRQ 17
> Memory at e1102000 (32-bit,
> non-prefetchable) [size=4K]
> Capabilities: [50] Power Management version
> 2
>
> 00:04.0 Ethernet controller: Silicon Integrated
> Systems [SiS] SiS900 PCI
> Fast Ethernet (rev 91)
> Subsystem: Elitegroup Computer Systems
> Unknown device 1b13
> Flags: bus master, medium devsel, latency
> 32, IRQ 22
> I/O ports at e800 [size=256]
> Memory at e1103000 (32-bit,
> non-prefetchable) [size=4K]
> [virtual] Expansion ROM at 10000000
> [disabled] [size=128K]
> Capabilities: [40] Power Management version
> 2
>
> 01:00.0 VGA compatible controller: Silicon
> Integrated Systems [SiS]
> 661/741/760/761 PCI/AGP VGA Display Adapter (prog-if
> 00 [VGA])
> Subsystem: Elitegroup Computer Systems
> Unknown device 1b13
> Flags: 66MHz, medium devsel, IRQ 10
> BIST result: 00
> Memory at d8000000 (32-bit, prefetchable)
> [size=128M]
> Memory at e1000000 (32-bit,
> non-prefetchable) [size=128K]
> I/O ports at d000 [size=128]
> Capabilities: [40] Power Management version
> 2
> Capabilities: [50] AGP version 3.0
>
> Please help!
>
>
>
> --
> gentoo-user@gentoo.org mailing list
>
>
"He who writes the code gets to choose his license, and nobody else gets to complain" - Linus Torvale
In my honest opinion, it should read - "He who writes the code gets to choose his license, and everybody else complains."
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] OT - GLSlideshow and nvidia (I think) (no it is sis)
2006-07-16 16:38 ` Hemmann, Volker Armin
@ 2006-07-17 14:16 ` Michael Sullivan
0 siblings, 0 replies; 10+ messages in thread
From: Michael Sullivan @ 2006-07-17 14:16 UTC (permalink / raw
To: gentoo-user
On Sun, 2006-07-16 at 18:38 +0200, Hemmann, Volker Armin wrote:
> On Sunday 16 July 2006 17:36, Michael Sullivan wrote:
> > On Sun, 2006-07-16 at 16:43 +0200, Hemmann, Volker Armin wrote:
> > > On Sunday 16 July 2006 16:24, Michael Sullivan wrote:
> > > > Since the upgrade to modular X my wife has not been able to view her
> > > > favourite screesaver (our cats.) Whenever she runs the GLSlideshow
> > > > screensaver, she gets the following error:
> > > >
> > > >
> > > > Xlib extension GLX missing on display ":0.0"
> > > >
> > > > glslideshow display :0.0 does not support the GLX extension
> > >
> > > glxinfo
> > > /etc/X11/xorg.conf
> > > dmesg
> > > eselect opengl list
> > > is usually the minimum information needed. Because the vendor recalled
> > > the magic crystal balls some weeks ago.
> > >
> > > You don't have any nvidia stuff.
> > >
> > > You have sis integrated graphic. So you need sis support in the kernel.
> > >
> > > make menuconfig
> > >
> > > --->Device Drivers
> > >
> > > ---->Character Devices
> > >
> > > Turn on AGP for sis chipsets. Turn on dri support. Install
> > > x11-drivers/xf86-video-sis
> > > install
> > > x11-misc/sisctrl
> > >
> > > use google. Search for sis integrated graphics and xorg. There are lots
> > > of examples (can't help here, don't have sis integrated graphics.
> >
> > I searched google for "sis integrated graphics, xorg" and it pulled up a
> > lot of information, but I don't know exactly what I'm looking for. I
> > turned on /dev/agpgart for SIS and DRI in the kernel and rebooted with
> > it. I installed xf86-video-sis and sisctrl. sisctrl didn't work the
> > way I expected:
> >
> > catherine ~ # modprobe --list | grep 'sis'
> > /lib/modules/2.6.16-gentoo-r13/kernel/drivers/scsi/sata_sis.ko
> > /lib/modules/2.6.16-gentoo-r13/kernel/drivers/net/sis900.ko
> > catherine ~ # modprobe sata_sis
> > catherine ~ # modprobe sis900
> > catherine ~ # modprobe glx
>
> you don't modprobe glx. It is a Xorg module, not a kernel module.
>
> > FATAL: Module glx not found.
>
> that is correct.
>
> > catherine ~ # modprobe --list | grep 'glx'
>
> this too ;)
>
> > catherine ~ # sisctrl
> > SiS video adaptor not found
> > This program is for SiS 300, 315 and 330 series only
> > and requires the Xv (XVideo) extension.
>
> do you have libXv installed?
>
catherine ~ # emerge -pv libXv
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild R ] x11-libs/libXv-1.0.1 USE="-debug" 0 kB
Total size of downloads: 0 kB
catherine ~ #
> >
>
> > Identifier "Card0"
> > Driver "sis"
> > VendorName "Silicon Integrated Systems [SiS]"
> > BoardName "Unknown Board"
> > BusID "PCI:1:0:0"
>
> did you create that entry or a config app?
Most of catherine's /etc/X11/xorg.conf was created by running X
-configure when I first installed Gentoo (a long time ago)
> do you have the dri-useflag set?
>
I didn't have the dri USE flag set, but I added it to /etc/make.conf and
ran emerge -pvND world. None of the packages scheduled for rebuild used
the dri use flag, but I rebuilt them anyway.
> maybe this helps you:
> http://www.winischhofer.eu/linuxsisvga.shtml
>
> (the 6XX chipsets and the 7XX chipsets are more or less identical. 6=intel,
> 7=amd)
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] OT - GLSlideshow and nvidia (I think)
2006-07-17 6:22 ` Schleimer, Ben
@ 2006-07-17 14:21 ` Michael Sullivan
2006-07-17 19:48 ` Calvin Walton
0 siblings, 1 reply; 10+ messages in thread
From: Michael Sullivan @ 2006-07-17 14:21 UTC (permalink / raw
To: gentoo-user
On Sun, 2006-07-16 at 23:22 -0700, Schleimer, Ben wrote:
> What does your /var/log/Xorg.0.log read?
> Does it actually load the glx extension or fail for
> some reason?
>
Here's my /var/log/Xorg.0.log:
X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.16-gentoo-r9 i686
Current Operating System: Linux catherine 2.6.16-gentoo-r13 #1 SMP Sun
Jul 16 10:05:57 CDT 2006 i686
Build Date: 01 July 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 17 09:18:42 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(WW) The directory "/usr/share/fonts/CID/" does not exist.
Entry deleted from font path.
(**) FontPath set to
"/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/"
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.8
X.Org XInput driver : 0.5
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(++) using VT number 8
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0741 card 1019,1b13 rev 03 class 06,00,00
hdr 00
(II) PCI: 00:01:0: chip 1039,0003 card 0000,0000 rev 00 class 06,04,00
hdr 01
(II) PCI: 00:02:0: chip 1039,0964 card 0000,0000 rev 36 class 06,01,00
hdr 80
(II) PCI: 00:02:5: chip 1039,5513 card 1019,1b13 rev 01 class 01,01,80
hdr 00
(II) PCI: 00:02:7: chip 1039,7012 card 1019,1b13 rev a0 class 04,01,00
hdr 00
(II) PCI: 00:03:0: chip 1039,7001 card 1019,1b13 rev 0f class 0c,03,10
hdr 80
(II) PCI: 00:03:1: chip 1039,7001 card 1019,1b13 rev 0f class 0c,03,10
hdr 00
(II) PCI: 00:03:2: chip 1039,7001 card 1019,1b13 rev 0f class 0c,03,10
hdr 00
(II) PCI: 00:03:3: chip 1039,7002 card 1019,1b13 rev 00 class 0c,03,20
hdr 00
(II) PCI: 00:04:0: chip 1039,0900 card 1019,1b13 rev 91 class 02,00,00
hdr 00
(II) PCI: 01:00:0: chip 1039,6330 card 1019,1b13 rev 00 class 03,00,00
hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[2] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[3] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe1000000 - 0xe10fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is
set)
(--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] 661/741/760/761
PCI/AGP VGA Display Adapter rev 0, Mem @ 0xd8000000/27, 0xe1000000/17,
I/O @ 0xd000/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to
0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe1103000 - 0xe1103fff (0x1000) MX[B]
[1] -1 0 0xe1102000 - 0xe1102fff (0x1000) MX[B]
[2] -1 0 0xe1101000 - 0xe1101fff (0x1000) MX[B]
[3] -1 0 0xe1100000 - 0xe1100fff (0x1000) MX[B]
[4] -1 0 0xe1104000 - 0xe1104fff (0x1000) MX[B]
[5] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[6] -1 0 0xe1000000 - 0xe101ffff (0x20000) MX[B](B)
[7] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[8] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[9] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B]
[10] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[11] -1 0 0x00004000 - 0x0000400f (0x10) IX[B]
[12] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe1103000 - 0xe1103fff (0x1000) MX[B]
[1] -1 0 0xe1102000 - 0xe1102fff (0x1000) MX[B]
[2] -1 0 0xe1101000 - 0xe1101fff (0x1000) MX[B]
[3] -1 0 0xe1100000 - 0xe1100fff (0x1000) MX[B]
[4] -1 0 0xe1104000 - 0xe1104fff (0x1000) MX[B]
[5] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[6] -1 0 0xe1000000 - 0xe101ffff (0x20000) MX[B](B)
[7] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[8] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[9] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B]
[10] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[11] -1 0 0x00004000 - 0x0000400f (0x10) IX[B]
[12] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe1103000 - 0xe1103fff (0x1000) MX[B]
[6] -1 0 0xe1102000 - 0xe1102fff (0x1000) MX[B]
[7] -1 0 0xe1101000 - 0xe1101fff (0x1000) MX[B]
[8] -1 0 0xe1100000 - 0xe1100fff (0x1000) MX[B]
[9] -1 0 0xe1104000 - 0xe1104fff (0x1000) MX[B]
[10] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[11] -1 0 0xe1000000 - 0xe101ffff (0x20000) MX[B](B)
[12] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[16] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B]
[17] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[18] -1 0 0x00004000 - 0x0000400f (0x10) IX[B]
[19] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions/libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "glx"
(WW) Warning, couldn't open module glx
(II) UnloadModule: "glx"
(EE) Failed to load module "glx" (module does not exist, 0)
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.0.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "sis"
(II) Loading /usr/lib/xorg/modules/drivers/sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.8.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.4
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX],
SIS340
(II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
Volari V3XT/V5/V8/Duo (XG40)
(II) Primary Device is: PCI 01:00:0
(--) Chipset SIS660/[M]661[F|
M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX] found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe1103000 - 0xe1103fff (0x1000) MX[B]
[6] -1 0 0xe1102000 - 0xe1102fff (0x1000) MX[B]
[7] -1 0 0xe1101000 - 0xe1101fff (0x1000) MX[B]
[8] -1 0 0xe1100000 - 0xe1100fff (0x1000) MX[B]
[9] -1 0 0xe1104000 - 0xe1104fff (0x1000) MX[B]
[10] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[11] -1 0 0xe1000000 - 0xe101ffff (0x20000) MX[B](B)
[12] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[16] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B]
[17] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[18] -1 0 0x00004000 - 0x0000400f (0x10) IX[B]
[19] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe1103000 - 0xe1103fff (0x1000) MX[B]
[6] -1 0 0xe1102000 - 0xe1102fff (0x1000) MX[B]
[7] -1 0 0xe1101000 - 0xe1101fff (0x1000) MX[B]
[8] -1 0 0xe1100000 - 0xe1100fff (0x1000) MX[B]
[9] -1 0 0xe1104000 - 0xe1104fff (0x1000) MX[B]
[10] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[11] -1 0 0xe1000000 - 0xe101ffff (0x20000) MX[B](B)
[12] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[19] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B]
[20] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[21] -1 0 0x00004000 - 0x0000400f (0x10) IX[B]
[22] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
[23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 7.0.0.0)
(II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer
<thomas@winischhofer.net> and others
(II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml
(II) SIS(0): *** for documentation and updates.
(--) SIS(0): sisfb not found
(--) SIS(0): Relocated I/O registers at 0xD000
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(**) SIS(0): Depth 24, (--) framebuffer bpp 32
(==) SIS(0): RGB weight 888
(==) SIS(0): Default visual is TrueColor
(--) SIS(0): Video BIOS version "0.98.00 " found (new SiS data layout)
(**) SIS(0): Option "DRI" "true"
(==) SIS(0): Using XAA acceleration architecture
(==) SIS(0): Using HW cursor
(==) SIS(0): Color HW cursor is enabled
(II) SIS(0): Using VRAM command queue, size 512k
(==) SIS(0): Hotkey display switching is enabled
(II) SIS(0): WARNING: Using the Hotkey might freeze your machine,
regardless
(II) SIS(0): whether enabled or disabled. This is no driver
bug.
(==) SIS(0): SiSCtrl utility interface is disabled
(II) SIS(0): For information on SiSCtrl, see
http://www.winischhofer.at/linuxsispart1.shtml#sisctrl
(**) SIS(0): DRI enabled
(--) SIS(0): DIMM0 is DDR SDRAM
(--) SIS(0): DIMM1 is not installed
(--) SIS(0): DIMM2 is not installed
(--) SIS(0): DIMM3 is not installed
(--) SIS(0): DRAM type: DDR SDRAM
(--) SIS(0): Memory clock: 332.892 MHz
(--) SIS(0): DRAM bus width: 64 bit
(--) SIS(0): Linear framebuffer at 0xD8000000
(--) SIS(0): MMIO registers at 0xE1000000 (size 64K)
(--) SIS(0): VideoRAM: 32768 KB
(II) SIS(0): Using 16384K of framebuffer memory at offset 0K
(--) SIS(0): Hardware supports two video overlays
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(II) SIS(0): Gamma correction is enabled
(II) SIS(0): Separate Xv gamma correction is disabled
(--) SIS(0): Memory bandwidth at 32 bpp is 665.784 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(--) SIS(0): CRT1 DDC probing failed
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 16384 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 6330
(II) SIS(0): VESA VBE OEM Product Rev: 0.98.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(II) SIS(0): VESA VBE DDC supported
(II) SIS(0): VESA VBE DDC Level 2
(II) SIS(0): VESA VBE DDC transfer in appr. 1 sec.
(II) SIS(0): VESA VBE DDC read successfully
(--) SIS(0): VBE CRT1 DDC monitor info:
(II) SIS(0): Manufacturer: SNY Model: 650 Serial#: 7120864
(II) SIS(0): Year: 1997 Week: 42
(II) SIS(0): EDID Version: 1.0
(II) SIS(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V
(II) SIS(0): Sync: Separate Composite SyncOnGreen
(II) SIS(0): Max H-Image Size [cm]: horiz.: 28 vert.: 21
(II) SIS(0): Gamma: 2.50
(II) SIS(0): DPMS capabilities: Suspend Off; RGB/Color Display
(II) SIS(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.595
(II) SIS(0): blueX: 0.155 blueY: 0.070 whiteX: 0.283 whiteY: 0.298
(II) SIS(0): Supported VESA Video Modes:
(II) SIS(0): 720x400@70Hz
(II) SIS(0): 720x400@88Hz
(II) SIS(0): 640x480@60Hz
(II) SIS(0): 640x480@67Hz
(II) SIS(0): 640x480@72Hz
(II) SIS(0): 640x480@75Hz
(II) SIS(0): 800x600@56Hz
(II) SIS(0): 800x600@60Hz
(II) SIS(0): 800x600@72Hz
(II) SIS(0): 800x600@75Hz
(II) SIS(0): 832x624@75Hz
(II) SIS(0): 1024x768@87Hz (interlaced)
(II) SIS(0): 1024x768@60Hz
(II) SIS(0): 1024x768@70Hz
(II) SIS(0): 1024x768@75Hz
(II) SIS(0): Manufacturer's mask: 0
(II) SIS(0): Supported Future Video Modes:
(II) SIS(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) SIS(0): #1: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) SIS(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) SIS(0): Supported additional Video Mode:
(II) SIS(0): clock: 25.2 MHz Image Size: 270 x 202 mm
(II) SIS(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800
h_border: 0
(II) SIS(0): v_active: 400 v_sync: 412 v_sync_end 414 v_blanking: 449
v_border: 0
(II) SIS(0): Supported additional Video Mode:
(II) SIS(0): clock: 80.0 MHz Image Size: 270 x 202 mm
(II) SIS(0): h_active: 1152 h_sync: 1216 h_sync_end 1328 h_blank_end
1456 h_border: 0
(II) SIS(0): v_active: 864 v_sync: 870 v_sync_end 875 v_blanking: 916
v_border: 0
(II) SIS(0): Supported additional Video Mode:
(II) SIS(0): clock: 65.0 MHz Image Size: 270 x 202 mm
(II) SIS(0): h_active: 1152 h_sync: 1240 h_sync_end 1368 h_blank_end
1448 h_border: 0
(II) SIS(0): v_active: 432 v_sync: 447 v_sync_end 451 v_blanking: 473
v_border: 0
(II) SIS(0): Supported additional Video Mode:
(II) SIS(0): clock: 25.2 MHz Image Size: 270 x 202 mm
(II) SIS(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800
h_border: 0
(II) SIS(0): v_active: 480 v_sync: 490 v_sync_end 492 v_blanking: 525
v_border: 0
(--) SIS(0): According to DDC size, CRT1 aspect ratio is 1.33:1 (normal)
(--) SIS(0): End of VBE CRT1 DDC monitor info
(==) SIS(0): Min pixel clock is 10 MHz
(--) SIS(0): Max pixel clock is 400 MHz
(II) SIS(0): Replaced entire mode list with built-in modes
(II) SIS(0): Using fake widescreen modes for CRT1 VGA devices
(II) SIS(0): Use option "ForceCRT1VGAAspect" to overrule
(II) SIS(0): Substituting missing CRT1 monitor HSync range by DDC data
(II) SIS(0): Substituting missing CRT1 monitor VRefresh range by DDC
data
(II) SIS(0): "Unknown reason" in the following list means that the mode
(II) SIS(0): is not supported on the chipset/bridge/current output
device.
(II) SIS(0): Monitor0: Using hsync range of 31.50-68.54 kHz
(II) SIS(0): Monitor0: Using vrefresh range of 56.00-85.00 Hz
(II) SIS(0): Clock range: 10.00 to 400.00 MHz
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "2048x1536" (hsync out of range)
(II) SIS(0): Not using default mode "2048x1536" (hsync out of range)
(II) SIS(0): Not using default mode "2048x1536" (hsync out of range)
(II) SIS(0): Not using default mode "2048x1536" (hsync out of range)
(II) SIS(0): Not using default mode "2048x1536" (hsync out of range)
(II) SIS(0): Not using default mode "1024x576" (hsync out of range)
(II) SIS(0): Not using default mode "1280x720" (hsync out of range)
(II) SIS(0): Not using default mode "1280x720" (hsync out of range)
(II) SIS(0): Not using default mode "1280x960" (hsync out of range)
(II) SIS(0): Not using default mode "1280x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x768" (hsync out of range)
(II) SIS(0): Not using default mode "1400x1050" (hsync out of range)
(II) SIS(0): Not using default mode "1152x864" (hsync out of range)
(II) SIS(0): Not using default mode "848x480" (hsync out of range)
(II) SIS(0): Not using default mode "848x480" (hsync out of range)
(II) SIS(0): Not using default mode "856x480" (hsync out of range)
(II) SIS(0): Not using default mode "1280x800" (hsync out of range)
(II) SIS(0): Not using default mode "1280x800" (hsync out of range)
(II) SIS(0): Not using default mode "1280x854" (hsync out of range)
(II) SIS(0): Not using default mode "1280x854" (hsync out of range)
(II) SIS(0): Not using default mode "1680x1050" (width too large for
virtual size)
(II) SIS(0): Not using default mode "1400x1050" (width too large for
virtual size)
(II) SIS(0): Not using default mode "1280x1024" (width too large for
virtual size)
(II) SIS(0): Not using default mode "1280x960" (width too large for
virtual size)
(II) SIS(0): Not using default mode "1280x854" (width too large for
virtual size)
(II) SIS(0): Not using default mode "1360x768" (width too large for
virtual size)
(II) SIS(0): Not using default mode "1280x800" (width too large for
virtual size)
(II) SIS(0): Not using default mode "1152x864" (width too large for
virtual size)
(II) SIS(0): Not using default mode "1152x864" (width too large for
virtual size)
(II) SIS(0): Not using default mode "1280x768" (width too large for
virtual size)
(II) SIS(0): Not using default mode "1280x720" (width too large for
virtual size)
(--) SIS(0): Virtual size is 1024x768 (pitch 1024)
(**) SIS(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) SIS(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769
772 808 +hsync +vsync
(**) SIS(0): *Default mode "800x600": 56.2 MHz, 53.7 kHz, 85.1 Hz
(II) SIS(0): Modeline "800x600" 56.25 800 832 896 1048 600 601 604
631 +hsync +vsync
(**) SIS(0): Default mode "1024x768": 78.7 MHz, 60.0 kHz, 75.0 Hz
(II) SIS(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769
772 800 +hsync +vsync
(**) SIS(0): Default mode "1024x768": 75.2 MHz, 56.6 kHz, 70.2 Hz
(II) SIS(0): Modeline "1024x768" 75.17 1024 1048 1184 1328 768 771
777 806 -hsync -vsync
(**) SIS(0): Default mode "1024x768": 65.1 MHz, 48.5 kHz, 60.1 Hz
(II) SIS(0): Modeline "1024x768" 65.15 1024 1048 1184 1344 768 771
777 806 -hsync -vsync
(**) SIS(0): Default mode "1024x576": 78.7 MHz, 60.0 kHz, 75.0 Hz
(II) SIS(0): Modeline "1024x576" 78.75 1024 1040 1136 1312 576 686
690 800 +hsync +vsync
(**) SIS(0): Default mode "1024x576": 65.1 MHz, 48.5 kHz, 60.1 Hz
(II) SIS(0): Modeline "1024x576" 65.15 1024 1048 1184 1344 576 688
694 806 +hsync +vsync
(**) SIS(0): Default mode "960x600": 41.5 MHz, 37.1 kHz, 60.0 Hz
(II) SIS(0): Modeline "960x600" 41.50 960 1008 1088 1120 600 603 609
618 +hsync +vsync
(**) SIS(0): Default mode "960x540": 37.3 MHz, 33.8 kHz, 60.0 Hz
(II) SIS(0): Modeline "960x540" 37.29 960 976 1008 1104 540 543 549
563 +hsync +vsync
(**) SIS(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) SIS(0): Modeline "800x600" 49.52 800 816 896 1056 600 601 604
625 +hsync +vsync
(**) SIS(0): Default mode "800x600": 50.1 MHz, 48.2 kHz, 72.4 Hz
(II) SIS(0): Modeline "800x600" 50.11 800 856 976 1040 600 637 643
666 +hsync +vsync
(**) SIS(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SIS(0): Modeline "800x600" 39.97 800 840 968 1056 600 601 605
628 +hsync +vsync
(**) SIS(0): Default mode "800x600": 36.1 MHz, 35.2 kHz, 56.3 Hz
(II) SIS(0): Modeline "800x600" 36.06 800 824 896 1024 600 601 603
625 +hsync +vsync
(**) SIS(0): Default mode "768x576": 35.0 MHz, 35.9 kHz, 60.1 Hz
(II) SIS(0): Modeline "768x576" 35.00 768 792 872 976 576 578 581
597 +hsync +vsync
(**) SIS(0): Default mode "720x576": 32.7 MHz, 35.9 kHz, 60.1 Hz
(II) SIS(0): Modeline "720x576" 32.73 720 744 816 912 576 578 581
597 +hsync +vsync
(**) SIS(0): Default mode "856x480": 33.9 MHz, 31.7 kHz, 59.8 Hz
(II) SIS(0): Modeline "856x480" 33.94 856 872 1000 1072 480 492 495
529 -hsync -vsync
(**) SIS(0): Default mode "800x480": 56.2 MHz, 53.7 kHz, 85.2 Hz
(II) SIS(0): Modeline "800x480" 56.25 800 832 896 1048 480 554 557
630 +hsync +vsync
(**) SIS(0): Default mode "800x480": 49.5 MHz, 46.9 kHz, 75.1 Hz
(II) SIS(0): Modeline "800x480" 49.52 800 816 896 1056 480 551 554
624 +hsync +vsync
(**) SIS(0): Default mode "800x480": 39.8 MHz, 37.7 kHz, 60.0 Hz
(II) SIS(0): Modeline "800x480" 39.77 800 840 968 1056 480 552 556
628 +hsync +vsync
(**) SIS(0): Default mode "720x480": 28.3 MHz, 31.6 kHz, 61.0 Hz
(II) SIS(0): Modeline "720x480" 28.28 720 728 840 896 480 490 492
517 -hsync -vsync
(**) SIS(0): Default mode "640x480": 36.1 MHz, 43.3 kHz, 85.1 Hz
(II) SIS(0): Modeline "640x480" 36.06 640 696 752 832 480 481 484
509 -hsync -vsync
(**) SIS(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) SIS(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484
500 -hsync -vsync
(**) SIS(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) SIS(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491
520 -hsync -vsync
(**) SIS(0): Default mode "640x480": 25.1 MHz, 31.3 kHz, 59.7 Hz
(II) SIS(0): Modeline "640x480" 25.06 640 656 752 800 480 490 492
525 -hsync -vsync
(**) SIS(0): Default mode "640x400": 25.1 MHz, 31.6 kHz, 71.6 Hz
(II) SIS(0): Modeline "640x400" 25.06 640 656 752 792 400 413 415
442 -hsync +vsync
(**) SIS(0): Default mode "512x384": 32.6 MHz, 48.5 kHz, 60.1 Hz (D)
(II) SIS(0): Modeline "512x384" 32.57 512 528 592 672 384 385 388
403 doublescan -hsync -vsync
(**) SIS(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SIS(0): Modeline "400x300" 19.98 400 416 480 528 300 300 302
314 doublescan +hsync +vsync
(**) SIS(0): Default mode "320x240": 12.5 MHz, 31.3 kHz, 60.7 Hz (D)
(II) SIS(0): Modeline "320x240" 12.53 320 328 376 400 240 245 246
258 doublescan -hsync -vsync
(**) SIS(0): Default mode "320x200": 12.5 MHz, 31.3 kHz, 70.9 Hz (D)
(II) SIS(0): Modeline "320x200" 12.53 320 328 376 400 200 206 207
221 doublescan -hsync +vsync
(--) SIS(0): Display dimensions: (280, 210) mm
(--) SIS(0): DPI set to (92, 92)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) SIS(0): 2D acceleration enabled
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe1000000 - 0xe101ffff (0x20000) MX[B]
[1] 0 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xe1103000 - 0xe1103fff (0x1000) MX[B]
[8] -1 0 0xe1102000 - 0xe1102fff (0x1000) MX[B]
[9] -1 0 0xe1101000 - 0xe1101fff (0x1000) MX[B]
[10] -1 0 0xe1100000 - 0xe1100fff (0x1000) MX[B]
[11] -1 0 0xe1104000 - 0xe1104fff (0x1000) MX[B]
[12] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[13] -1 0 0xe1000000 - 0xe101ffff (0x20000) MX[B](B)
[14] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[18] 0 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[22] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B]
[23] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[24] -1 0 0x00004000 - 0x0000400f (0x10) IX[B]
[25] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
[26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules/libvbe.so
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 16384 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 6330
(II) SIS(0): VESA VBE OEM Product Rev: 0.98.00
(II) SIS(0): Setting standard mode 0x64
(NI) SIS(0): DRI not supported on this chipset
(II) SIS(0): RENDER acceleration enabled
(II) SIS(0): Framebuffer from (0,0) to (1023,4094)
(II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
6 512x512 slots
32 8x8 color pattern slots
(--) SIS(0): CPU frequency 1662.77Mhz
(II) SIS(0): Benchmarking system RAM to video RAM memory transfer
methods:
(--) SIS(0): Checked libc memcpy()... 70.2 MiB/s
(--) SIS(0): Checked built-in-1 memcpy()... 70.3 MiB/s
(--) SIS(0): Checked built-in-2 memcpy()... 40.1 MiB/s
(--) SIS(0): Checked MMX memcpy()... 140.3 MiB/s
(--) SIS(0): Checked SSE memcpy()... 140.4 MiB/s
(--) SIS(0): Checked 3DNow! memcpy()... 140.5 MiB/s
(--) SIS(0): Checked MMX2 memcpy()... 140.5 MiB/s
(--) SIS(0): Using MMX2 method for aligned data transfers to video RAM
(--) SIS(0): Using MMX2 method for unaligned data transfers to video RAM
(==) SIS(0): Backing store disabled
(==) SIS(0): Silken mouse enabled
(**) Option "dpms"
(**) SIS(0): DPMS enabled
(II) SIS(0): Using SiS300/315/330/340 series HW Xv
(II) SIS(0): Default Xv adaptor is Video Overlay
(II) SIS(0): Direct rendering disabled
(II) SIS(0): Initialized SISCTRL extension version 0.1
(II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mouse0"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/input/mouse0"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
> Also, double check that you are using the opengl
> use-flag. I think it enables mesa since your video
> card doesn;t support גרן.
opengl USE flag is enabled...
>
> Good luck
> Ben
>
>
> --- Michael Sullivan <michael@espersunited.com> wrote:
>
> > Since the upgrade to modular X my wife has not been
> > able to view her
> > favourite screesaver (our cats.) Whenever she runs
> > the GLSlideshow
> > screensaver, she gets the following error:
> >
> >
> > Xlib extension GLX missing on display ":0.0"
> >
> > glslideshow display :0.0 does not support the GLX
> > extension
> >
> > I googled for this error and everywhere I looked
> > people were fixing this
> > error by installing proper nvidia modules. My
> > problem is that I know
> > nothing about nvidia or even device drivers in
> > general. Do I need to
> > compile nvidia drivers into her kernel? If so,
> > which ones? Here's the
> > lspci output from her computer:
> >
> > catherine X11 # lspci -v
> > 00:00.0 Host bridge: Silicon Integrated Systems
> > [SiS] 741/741GX/M741
> > Host (rev 03)
> > Subsystem: Elitegroup Computer Systems
> > Unknown device 1b13
> > Flags: bus master, medium devsel, latency 32
> > Memory at d0000000 (32-bit,
> > non-prefetchable) [size=128M]
> > Capabilities: [c0] AGP version 3.5
> >
> > 00:01.0 PCI bridge: Silicon Integrated Systems [SiS]
> > SiS AGP Port
> > (virtual PCI-to-PCI bridge) (prog-if 00 [Normal
> > decode])
> > Flags: bus master, 66MHz, fast devsel,
> > latency 99
> > Bus: primary=00, secondary=01,
> > subordinate=01, sec-latency=32
> > I/O behind bridge: 0000d000-0000dfff
> > Memory behind bridge: e1000000-e10fffff
> > Prefetchable memory behind bridge:
> > d8000000-dfffffff
> >
> > 00:02.0 ISA bridge: Silicon Integrated Systems [SiS]
> > SiS964 [MuTIOL
> > Media IO] (rev 36)
> > Flags: bus master, medium devsel, latency 0
> >
> > 00:02.5 IDE interface: Silicon Integrated Systems
> > [SiS] 5513 [IDE] (rev
> > 01) (prog-if 80 [Master])
> > Subsystem: Elitegroup Computer Systems
> > Unknown device 1b13
> > Flags: bus master, medium devsel, latency
> > 128, IRQ 16
> > I/O ports at <unassigned>
> > I/O ports at <unassigned>
> > I/O ports at <unassigned>
> > I/O ports at <unassigned>
> > I/O ports at 4000 [size=16]
> > Capabilities: [58] Power Management version
> > 2
> >
> > 00:02.7 Multimedia audio controller: Silicon
> > Integrated Systems [SiS]
> > AC'97 Sound Controller (rev a0)
> > Subsystem: Elitegroup Computer Systems
> > Unknown device 1b13
> > Flags: bus master, medium devsel, latency
> > 32, IRQ 21
> > I/O ports at e000 [size=256]
> > I/O ports at e400 [size=128]
> > Capabilities: [48] Power Management version
> > 2
> >
> > 00:03.0 USB Controller: Silicon Integrated Systems
> > [SiS] USB 1.0
> > Controller (rev 0f) (prog-if 10 [OHCI])
> > Subsystem: Elitegroup Computer Systems
> > Unknown device 1b13
> > Flags: bus master, medium devsel, latency
> > 32, IRQ 18
> > Memory at e1104000 (32-bit,
> > non-prefetchable) [size=4K]
> >
> > 00:03.1 USB Controller: Silicon Integrated Systems
> > [SiS] USB 1.0
> > Controller (rev 0f) (prog-if 10 [OHCI])
> > Subsystem: Elitegroup Computer Systems
> > Unknown device 1b13
> > Flags: bus master, medium devsel, latency
> > 32, IRQ 19
> > Memory at e1100000 (32-bit,
> > non-prefetchable) [size=4K]
> >
> > 00:03.2 USB Controller: Silicon Integrated Systems
> > [SiS] USB 1.0
> > Controller (rev 0f) (prog-if 10 [OHCI])
> > Subsystem: Elitegroup Computer Systems
> > Unknown device 1b13
> > Flags: bus master, medium devsel, latency
> > 32, IRQ 20
> > Memory at e1101000 (32-bit,
> > non-prefetchable) [size=4K]
> >
> > 00:03.3 USB Controller: Silicon Integrated Systems
> > [SiS] USB 2.0
> > Controller (prog-if 20 [EHCI])
> > Subsystem: Elitegroup Computer Systems
> > Unknown device 1b13
> > Flags: bus master, medium devsel, latency
> > 32, IRQ 17
> > Memory at e1102000 (32-bit,
> > non-prefetchable) [size=4K]
> > Capabilities: [50] Power Management version
> > 2
> >
> > 00:04.0 Ethernet controller: Silicon Integrated
> > Systems [SiS] SiS900 PCI
> > Fast Ethernet (rev 91)
> > Subsystem: Elitegroup Computer Systems
> > Unknown device 1b13
> > Flags: bus master, medium devsel, latency
> > 32, IRQ 22
> > I/O ports at e800 [size=256]
> > Memory at e1103000 (32-bit,
> > non-prefetchable) [size=4K]
> > [virtual] Expansion ROM at 10000000
> > [disabled] [size=128K]
> > Capabilities: [40] Power Management version
> > 2
> >
> > 01:00.0 VGA compatible controller: Silicon
> > Integrated Systems [SiS]
> > 661/741/760/761 PCI/AGP VGA Display Adapter (prog-if
> > 00 [VGA])
> > Subsystem: Elitegroup Computer Systems
> > Unknown device 1b13
> > Flags: 66MHz, medium devsel, IRQ 10
> > BIST result: 00
> > Memory at d8000000 (32-bit, prefetchable)
> > [size=128M]
> > Memory at e1000000 (32-bit,
> > non-prefetchable) [size=128K]
> > I/O ports at d000 [size=128]
> > Capabilities: [40] Power Management version
> > 2
> > Capabilities: [50] AGP version 3.0
> >
> > Please help!
> >
> >
> >
> > --
> > gentoo-user@gentoo.org mailing list
> >
> >
>
>
> "He who writes the code gets to choose his license, and nobody else gets to complain" - Linus Torvale
> In my honest opinion, it should read - "He who writes the code gets to choose his license, and everybody else complains."
>
>
>
>
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] OT - GLSlideshow and nvidia (I think)
2006-07-17 14:21 ` Michael Sullivan
@ 2006-07-17 19:48 ` Calvin Walton
0 siblings, 0 replies; 10+ messages in thread
From: Calvin Walton @ 2006-07-17 19:48 UTC (permalink / raw
To: gentoo-user
On 7/17/06, Michael Sullivan <michael@espersunited.com> wrote:
> Here's my /var/log/Xorg.0.log:
>
> (II) LoadModule: "glx"
> (WW) Warning, couldn't open module glx
> (II) UnloadModule: "glx"
> (EE) Failed to load module "glx" (module does not exist, 0)
Hmm.
Does the symlink /usr/lib/xorg/modules/extensions/libglx.so exist, pointing to
/usr/lib/opengl/xorg-x11/extensions/libglx.so ?
If not, try running
eselect opengl set xorg-x11
If it still doesn't work, you'll probably have to re-emerge
x11-base/xorg-server to get back the glx module.
--
Calvin Walton
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2006-07-17 19:57 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-07-16 14:24 [gentoo-user] OT - GLSlideshow and nvidia (I think) Michael Sullivan
2006-07-16 14:43 ` [gentoo-user] OT - GLSlideshow and nvidia (I think) (no it is sis) Hemmann, Volker Armin
2006-07-16 15:36 ` Michael Sullivan
2006-07-16 16:38 ` Hemmann, Volker Armin
2006-07-17 14:16 ` Michael Sullivan
2006-07-16 17:57 ` [gentoo-user] OT - GLSlideshow and nvidia (I think) Richard Fish
2006-07-16 18:08 ` Michael Sullivan
2006-07-17 6:22 ` Schleimer, Ben
2006-07-17 14:21 ` Michael Sullivan
2006-07-17 19:48 ` Calvin Walton
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox