* [gentoo-user] Only one processor ?
@ 2006-03-28 13:18 Keats
2006-03-28 13:48 ` Javier Payno
` (3 more replies)
0 siblings, 4 replies; 14+ messages in thread
From: Keats @ 2006-03-28 13:18 UTC (permalink / raw
To: gentoo-user
Hi,
on a recent gentoo installation,
i ve noticed that i have only one of my processor detected...
i have dual xeon ht so i should have 4 processors detected but i only
have two, like on my xeon ht...
physical id : 0 for the two processors detected means that only one
physicval processor is detected...
themof ~ # cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.20GHz
stepping : 1
cpu MHz : 3200.244
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm
constant_tsc pni monitor ds_cpl cid cx16 xtpr
bogomips : 6409.60
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.20GHz
stepping : 1
cpu MHz : 3200.244
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm
constant_tsc pni monitor ds_cpl cid cx16 xtpr
bogomips : 6400.78
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:
here is my headless config file, i removed a lot of things cause it's
only a server... so i don't need usb and things like that...
any help is welcome :)
thanx
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14-hardened-r6
# Mon Mar 27 16:16:52 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
#
# Processor type and features
#
# CONFIG_MK8 is not set
CONFIG_MPSC=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_HT=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_SCHED_SMT=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
# CONFIG_K8_NUMA is not set
# CONFIG_NUMA_EMU is not set
# CONFIG_NUMA is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_NR_CPUS=8
CONFIG_HOTPLUG_CPU=y
CONFIG_HPET_TIMER=y
# CONFIG_X86_PM_TIMER is not set
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set
CONFIG_SUSPEND_SMP=y
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_UNORDERED_IO is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# CONFIG_IA32_EMULATION is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
CONFIG_INET6_TUNNEL=y
# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_NETLINK is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_NETBIOS_NS is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_IPRANGE=y
CONFIG_IP_NF_MATCH_MAC=y
CONFIG_IP_NF_MATCH_PKTTYPE=y
CONFIG_IP_NF_MATCH_MARK=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_DSCP=y
CONFIG_IP_NF_MATCH_AH_ESP=y
CONFIG_IP_NF_MATCH_LENGTH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_TCPMSS=y
# CONFIG_IP_NF_MATCH_STEALTH is not set
CONFIG_IP_NF_MATCH_HELPER=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_CONNTRACK=y
CONFIG_IP_NF_MATCH_OWNER=y
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_DCCP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
# CONFIG_IP_NF_MATCH_STRING is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_TARGET_TCPMSS=y
# CONFIG_IP_NF_TARGET_NFQUEUE is not set
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_SAME=y
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_DSCP=y
CONFIG_IP_NF_TARGET_MARK=y
CONFIG_IP_NF_TARGET_CLASSIFY=y
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_TARGET_NOTRACK=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_LBD=y
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=y
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_QSTOR is not set
CONFIG_SCSI_SATA_SX4=y
# CONFIG_SCSI_SATA_SIL is not set
CONFIG_SCSI_SATA_SIS=y
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
CONFIG_SCSI_SATA_INTEL_COMBINED=y
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=y
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID5=y
CONFIG_MD_RAID6=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
# CONFIG_I8XX_TCO is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
CONFIG_I2C_I810=y
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15
#
# Security options
#
#
# PaX
#
CONFIG_PAX=y
#
# PaX Control
#
# CONFIG_PAX_SOFTMODE is not set
CONFIG_PAX_EI_PAX=y
CONFIG_PAX_PT_PAX_FLAGS=y
# CONFIG_PAX_NO_ACL_FLAGS is not set
CONFIG_PAX_HAVE_ACL_FLAGS=y
# CONFIG_PAX_HOOK_ACL_FLAGS is not set
#
# Non-executable pages
#
CONFIG_PAX_NOEXEC=y
# CONFIG_PAX_PAGEEXEC is not set
#
# Address Space Layout Randomization
#
CONFIG_PAX_ASLR=y
CONFIG_PAX_RANDUSTACK=y
CONFIG_PAX_RANDMMAP=y
#
# Grsecurity
#
CONFIG_GRKERNSEC=y
# CONFIG_GRKERNSEC_LOW is not set
# CONFIG_GRKERNSEC_MEDIUM is not set
# CONFIG_GRKERNSEC_HIGH is not set
CONFIG_GRKERNSEC_CUSTOM=y
#
# Address Space Protection
#
# CONFIG_GRKERNSEC_KMEM is not set
# CONFIG_GRKERNSEC_IO is not set
# CONFIG_GRKERNSEC_PROC_MEMMAP is not set
# CONFIG_GRKERNSEC_BRUTE is not set
CONFIG_GRKERNSEC_HIDESYM=y
#
# Role Based Access Control Options
#
CONFIG_GRKERNSEC_ACL_HIDEKERN=y
CONFIG_GRKERNSEC_ACL_MAXTRIES=3
CONFIG_GRKERNSEC_ACL_TIMEOUT=30
#
# Filesystem Protections
#
CONFIG_GRKERNSEC_PROC=y
# CONFIG_GRKERNSEC_PROC_USER is not set
CONFIG_GRKERNSEC_PROC_USERGROUP=y
CONFIG_GRKERNSEC_PROC_GID=10
CONFIG_GRKERNSEC_PROC_ADD=y
CONFIG_GRKERNSEC_LINK=y
CONFIG_GRKERNSEC_FIFO=y
CONFIG_GRKERNSEC_CHROOT=y
CONFIG_GRKERNSEC_CHROOT_MOUNT=y
CONFIG_GRKERNSEC_CHROOT_DOUBLE=y
CONFIG_GRKERNSEC_CHROOT_PIVOT=y
CONFIG_GRKERNSEC_CHROOT_CHDIR=y
CONFIG_GRKERNSEC_CHROOT_CHMOD=y
CONFIG_GRKERNSEC_CHROOT_FCHDIR=y
CONFIG_GRKERNSEC_CHROOT_MKNOD=y
CONFIG_GRKERNSEC_CHROOT_SHMAT=y
CONFIG_GRKERNSEC_CHROOT_UNIX=y
CONFIG_GRKERNSEC_CHROOT_FINDTASK=y
CONFIG_GRKERNSEC_CHROOT_NICE=y
CONFIG_GRKERNSEC_CHROOT_SYSCTL=y
CONFIG_GRKERNSEC_CHROOT_CAPS=y
#
# Kernel Auditing
#
# CONFIG_GRKERNSEC_AUDIT_GROUP is not set
CONFIG_GRKERNSEC_EXECLOG=y
CONFIG_GRKERNSEC_RESLOG=y
CONFIG_GRKERNSEC_CHROOT_EXECLOG=y
CONFIG_GRKERNSEC_AUDIT_CHDIR=y
CONFIG_GRKERNSEC_AUDIT_MOUNT=y
CONFIG_GRKERNSEC_AUDIT_IPC=y
CONFIG_GRKERNSEC_SIGNAL=y
CONFIG_GRKERNSEC_FORKFAIL=y
CONFIG_GRKERNSEC_TIME=y
CONFIG_GRKERNSEC_PROC_IPADDR=y
#
# Executable Protections
#
CONFIG_GRKERNSEC_EXECVE=y
# CONFIG_GRKERNSEC_SHM is not set
CONFIG_GRKERNSEC_DMESG=y
CONFIG_GRKERNSEC_RANDPID=y
CONFIG_GRKERNSEC_TPE=y
CONFIG_GRKERNSEC_TPE_ALL=y
# CONFIG_GRKERNSEC_TPE_INVERT is not set
CONFIG_GRKERNSEC_TPE_GID=100
#
# Network Protections
#
CONFIG_GRKERNSEC_RANDNET=y
CONFIG_GRKERNSEC_RANDSRC=y
# CONFIG_GRKERNSEC_SOCKET is not set
#
# Sysctl support
#
CONFIG_GRKERNSEC_SYSCTL=y
# CONFIG_GRKERNSEC_SYSCTL_ON is not set
#
# Logging Options
#
CONFIG_GRKERNSEC_FLOODTIME=10
CONFIG_GRKERNSEC_FLOODBURST=4
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user] Only one processor ?
2006-03-28 13:18 [gentoo-user] Only one processor ? Keats
@ 2006-03-28 13:48 ` Javier Payno
2006-03-28 13:59 ` Dirk Heinrichs
2006-03-28 14:28 ` Keats
2006-03-28 14:41 ` Fernando Antunes
` (2 subsequent siblings)
3 siblings, 2 replies; 14+ messages in thread
From: Javier Payno @ 2006-03-28 13:48 UTC (permalink / raw
To: gentoo-user
Hi
El Martes, 28 de Marzo de 2006 15:18, Keats escribió:
> Hi,
> on a recent gentoo installation,
> i ve noticed that i have only one of my processor detected...
> i have dual xeon ht so i should have 4 processors detected but i only
Have you activated the ht at the system bios??
regards
--
Javier Payno
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user] Only one processor ?
2006-03-28 13:48 ` Javier Payno
@ 2006-03-28 13:59 ` Dirk Heinrichs
2006-03-28 14:12 ` Alexander Skwar
` (2 more replies)
2006-03-28 14:28 ` Keats
1 sibling, 3 replies; 14+ messages in thread
From: Dirk Heinrichs @ 2006-03-28 13:59 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 746 bytes --]
Am Dienstag, 28. März 2006 15:48 schrieb ext Javier Payno:
> El Martes, 28 de Marzo de 2006 15:18, Keats escribió:
> > on a recent gentoo installation,
> > i ve noticed that i have only one of my processor detected...
> > i have dual xeon ht so i should have 4 processors detected but i only
>
> Have you activated the ht at the system bios??
And of course, SMP support in your kernel?
Bye...
Dirk
--
Dirk Heinrichs | Tel: +49 (0)162 234 3408
Configuration Manager | Fax: +49 (0)211 47068 111
Capgemini Deutschland | Mail: dirk.heinrichs@capgemini.com
Hambornerstraße 55 | Web: http://www.capgemini.com
D-40472 Düsseldorf | ICQ#: 110037733
GPG Public Key C2E467BB | Keyserver: www.keyserver.net
[-- Attachment #2: Type: application/pgp-signature, Size: 190 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user] Only one processor ?
2006-03-28 13:59 ` Dirk Heinrichs
@ 2006-03-28 14:12 ` Alexander Skwar
2006-03-28 14:23 ` Dirk Heinrichs
2006-03-28 14:30 ` Keats
2 siblings, 0 replies; 14+ messages in thread
From: Alexander Skwar @ 2006-03-28 14:12 UTC (permalink / raw
To: gentoo-user
Dirk Heinrichs wrote:
>> El Martes, 28 de Marzo de 2006 15:18, Keats escribió:
>> > on a recent gentoo installation,
>> > i ve noticed that i have only one of my processor detected...
>> > i have dual xeon ht so i should have 4 processors detected but i only
> And of course, SMP support in your kernel?
I also wanted to ask this, but then found:
CONFIG_SMP=y
:)
Alexander Skwar
--
We have DIFFERENT amounts of HAIR --
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user] Only one processor ?
2006-03-28 13:59 ` Dirk Heinrichs
2006-03-28 14:12 ` Alexander Skwar
@ 2006-03-28 14:23 ` Dirk Heinrichs
2006-03-28 14:30 ` Keats
2 siblings, 0 replies; 14+ messages in thread
From: Dirk Heinrichs @ 2006-03-28 14:23 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 917 bytes --]
Am Dienstag, 28. März 2006 15:59 schrieb ext Dirk Heinrichs:
> Am Dienstag, 28. März 2006 15:48 schrieb ext Javier Payno:
> > El Martes, 28 de Marzo de 2006 15:18, Keats escribió:
> > > on a recent gentoo installation,
> > > i ve noticed that i have only one of my processor detected...
> > > i have dual xeon ht so i should have 4 processors detected but i only
> >
> > Have you activated the ht at the system bios??
>
> And of course, SMP support in your kernel?
Just ignore this, Javier's answer reached my inbox _before_ the question
came in.
Bye...
Dirk
--
Dirk Heinrichs | Tel: +49 (0)162 234 3408
Configuration Manager | Fax: +49 (0)211 47068 111
Capgemini Deutschland | Mail: dirk.heinrichs@capgemini.com
Hambornerstraße 55 | Web: http://www.capgemini.com
D-40472 Düsseldorf | ICQ#: 110037733
GPG Public Key C2E467BB | Keyserver: www.keyserver.net
[-- Attachment #2: Type: application/pgp-signature, Size: 190 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user] Only one processor ?
2006-03-28 13:48 ` Javier Payno
2006-03-28 13:59 ` Dirk Heinrichs
@ 2006-03-28 14:28 ` Keats
2006-03-28 16:49 ` Richard Fish
1 sibling, 1 reply; 14+ messages in thread
From: Keats @ 2006-03-28 14:28 UTC (permalink / raw
To: gentoo-user
Le mardi 28 mars 2006 à 15:48 +0200, Javier Payno a écrit :
> Hi
>
> El Martes, 28 de Marzo de 2006 15:18, Keats escribió:
> > Hi,
> > on a recent gentoo installation,
> > i ve noticed that i have only one of my processor detected...
> > i have dual xeon ht so i should have 4 processors detected but i only
>
> Have you activated the ht at the system bios??
i don't think it can be that...
it's a server, i haven't access physicaly to it... so i can't modify
bios settings...
and i suppose my prodider have the set like it would be...
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user] Only one processor ?
2006-03-28 13:59 ` Dirk Heinrichs
2006-03-28 14:12 ` Alexander Skwar
2006-03-28 14:23 ` Dirk Heinrichs
@ 2006-03-28 14:30 ` Keats
2 siblings, 0 replies; 14+ messages in thread
From: Keats @ 2006-03-28 14:30 UTC (permalink / raw
To: gentoo-user
Le mardi 28 mars 2006 à 15:59 +0200, Dirk Heinrichs a écrit :
> Am Dienstag, 28. März 2006 15:48 schrieb ext Javier Payno:
> > El Martes, 28 de Marzo de 2006 15:18, Keats escribió:
> > > on a recent gentoo installation,
> > > i ve noticed that i have only one of my processor detected...
> > > i have dual xeon ht so i should have 4 processors detected but i only
> >
> > Have you activated the ht at the system bios??
>
> And of course, SMP support in your kernel?
>
in the initial post :
CONFIG_SMP=y
:)
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user] Only one processor ?
2006-03-28 13:18 [gentoo-user] Only one processor ? Keats
2006-03-28 13:48 ` Javier Payno
@ 2006-03-28 14:41 ` Fernando Antunes
2006-03-28 14:57 ` Keats
2006-03-28 17:16 ` kashani
2006-03-28 18:01 ` [solved] " Keats
3 siblings, 1 reply; 14+ messages in thread
From: Fernando Antunes @ 2006-03-28 14:41 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 34823 bytes --]
Please, do a cat /proc/interrupts.
How many CPU columns do you see ?
On 3/28/06, Keats <neokeats@wanadoo.fr> wrote:
>
> Hi,
> on a recent gentoo installation,
> i ve noticed that i have only one of my processor detected...
> i have dual xeon ht so i should have 4 processors detected but i only
> have two, like on my xeon ht...
> physical id : 0 for the two processors detected means that only one
> physicval processor is detected...
>
> themof ~ # cat /proc/cpuinfo
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 15
> model : 4
> model name : Intel(R) Xeon(TM) CPU 3.20GHz
> stepping : 1
> cpu MHz : 3200.244
> cache size : 1024 KB
> physical id : 0
> siblings : 2
> core id : 0
> cpu cores : 1
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
> cmov
> pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm
> constant_tsc pni monitor ds_cpl cid cx16 xtpr
> bogomips : 6409.60
> clflush size : 64
> cache_alignment : 128
> address sizes : 36 bits physical, 48 bits virtual
> power management:
>
> processor : 1
> vendor_id : GenuineIntel
> cpu family : 15
> model : 4
> model name : Intel(R) Xeon(TM) CPU 3.20GHz
> stepping : 1
> cpu MHz : 3200.244
> cache size : 1024 KB
> physical id : 0
> siblings : 2
> core id : 0
> cpu cores : 1
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
> cmov
> pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm
> constant_tsc pni monitor ds_cpl cid cx16 xtpr
> bogomips : 6400.78
> clflush size : 64
> cache_alignment : 128
> address sizes : 36 bits physical, 48 bits virtual
> power management:
>
> here is my headless config file, i removed a lot of things cause it's
> only a server... so i don't need usb and things like that...
> any help is welcome :)
> thanx
>
> #
> # Automatically generated make config: don't edit
> # Linux kernel version: 2.6.14-hardened-r6
> # Mon Mar 27 16:16:52 2006
> #
> CONFIG_X86_64=y
> CONFIG_64BIT=y
> CONFIG_X86=y
> CONFIG_SEMAPHORE_SLEEPERS=y
> CONFIG_MMU=y
> CONFIG_RWSEM_GENERIC_SPINLOCK=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_X86_CMPXCHG=y
> CONFIG_EARLY_PRINTK=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_IOMAP=y
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_CLEAN_COMPILE=y
> CONFIG_LOCK_KERNEL=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
>
> #
> # General setup
> #
> CONFIG_LOCALVERSION=""
> CONFIG_LOCALVERSION_AUTO=y
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_POSIX_MQUEUE=y
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_SYSCTL=y
> CONFIG_AUDIT=y
> CONFIG_AUDITSYSCALL=y
> CONFIG_HOTPLUG=y
> CONFIG_KOBJECT_UEVENT=y
> CONFIG_IKCONFIG=y
> CONFIG_IKCONFIG_PROC=y
> # CONFIG_CPUSETS is not set
> CONFIG_INITRAMFS_SOURCE=""
> # CONFIG_EMBEDDED is not set
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_SHMEM=y
> CONFIG_CC_ALIGN_FUNCTIONS=0
> CONFIG_CC_ALIGN_LABELS=0
> CONFIG_CC_ALIGN_LOOPS=0
> CONFIG_CC_ALIGN_JUMPS=0
> # CONFIG_TINY_SHMEM is not set
> CONFIG_BASE_SMALL=0
>
> #
> # Loadable module support
> #
> # CONFIG_MODULES is not set
> CONFIG_STOP_MACHINE=y
>
> #
> # Processor type and features
> #
> # CONFIG_MK8 is not set
> CONFIG_MPSC=y
> # CONFIG_GENERIC_CPU is not set
> CONFIG_X86_L1_CACHE_BYTES=128
> CONFIG_X86_L1_CACHE_SHIFT=7
> CONFIG_X86_TSC=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_MICROCODE=y
> CONFIG_X86_MSR=y
> CONFIG_X86_CPUID=y
> CONFIG_X86_HT=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_MTRR=y
> CONFIG_SMP=y
> CONFIG_SCHED_SMT=y
> # CONFIG_PREEMPT_NONE is not set
> # CONFIG_PREEMPT_VOLUNTARY is not set
> CONFIG_PREEMPT=y
> CONFIG_PREEMPT_BKL=y
> # CONFIG_K8_NUMA is not set
> # CONFIG_NUMA_EMU is not set
> # CONFIG_NUMA is not set
> CONFIG_ARCH_FLATMEM_ENABLE=y
> CONFIG_SELECT_MEMORY_MODEL=y
> CONFIG_FLATMEM_MANUAL=y
> # CONFIG_DISCONTIGMEM_MANUAL is not set
> # CONFIG_SPARSEMEM_MANUAL is not set
> CONFIG_FLATMEM=y
> CONFIG_FLAT_NODE_MEM_MAP=y
> # CONFIG_SPARSEMEM_STATIC is not set
> CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
> CONFIG_NR_CPUS=8
> CONFIG_HOTPLUG_CPU=y
> CONFIG_HPET_TIMER=y
> # CONFIG_X86_PM_TIMER is not set
> CONFIG_GART_IOMMU=y
> CONFIG_SWIOTLB=y
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_INTEL=y
> CONFIG_PHYSICAL_START=0x100000
> # CONFIG_KEXEC is not set
> CONFIG_SECCOMP=y
> # CONFIG_HZ_100 is not set
> CONFIG_HZ_250=y
> # CONFIG_HZ_1000 is not set
> CONFIG_HZ=250
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_ISA_DMA_API=y
> CONFIG_GENERIC_PENDING_IRQ=y
>
> #
> # Power management options
> #
> CONFIG_PM=y
> # CONFIG_PM_DEBUG is not set
> # CONFIG_SOFTWARE_SUSPEND is not set
> CONFIG_SUSPEND_SMP=y
>
> #
> # ACPI (Advanced Configuration and Power Interface) Support
> #
> CONFIG_ACPI=y
> CONFIG_ACPI_SLEEP=y
> CONFIG_ACPI_SLEEP_PROC_FS=y
> # CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
> CONFIG_ACPI_AC=y
> CONFIG_ACPI_BATTERY=y
> CONFIG_ACPI_BUTTON=y
> CONFIG_ACPI_VIDEO=y
> # CONFIG_ACPI_HOTKEY is not set
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_PROCESSOR=y
> CONFIG_ACPI_HOTPLUG_CPU=y
> CONFIG_ACPI_THERMAL=y
> # CONFIG_ACPI_ASUS is not set
> # CONFIG_ACPI_IBM is not set
> # CONFIG_ACPI_TOSHIBA is not set
> CONFIG_ACPI_BLACKLIST_YEAR=0
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_SYSTEM=y
> CONFIG_ACPI_CONTAINER=y
>
> #
> # CPU Frequency scaling
> #
> # CONFIG_CPU_FREQ is not set
>
> #
> # Bus options (PCI etc.)
> #
> CONFIG_PCI=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_MMCONFIG=y
> # CONFIG_UNORDERED_IO is not set
> CONFIG_PCIEPORTBUS=y
> # CONFIG_PCI_MSI is not set
> CONFIG_PCI_LEGACY_PROC=y
>
> #
> # PCCARD (PCMCIA/CardBus) support
> #
> # CONFIG_PCCARD is not set
>
> #
> # PCI Hotplug Support
> #
> # CONFIG_HOTPLUG_PCI is not set
>
> #
> # Executable file formats / Emulations
> #
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_MISC=y
> # CONFIG_IA32_EMULATION is not set
>
> #
> # Networking
> #
> CONFIG_NET=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> # CONFIG_PACKET_MMAP is not set
> CONFIG_UNIX=y
> CONFIG_XFRM=y
> # CONFIG_XFRM_USER is not set
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> # CONFIG_IP_ADVANCED_ROUTER is not set
> CONFIG_IP_FIB_HASH=y
> # CONFIG_IP_PNP is not set
> CONFIG_NET_IPIP=y
> # CONFIG_NET_IPGRE is not set
> # CONFIG_IP_MROUTE is not set
> # CONFIG_ARPD is not set
> # CONFIG_SYN_COOKIES is not set
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
> CONFIG_INET_TUNNEL=y
> CONFIG_INET_DIAG=y
> CONFIG_INET_TCP_DIAG=y
> # CONFIG_TCP_CONG_ADVANCED is not set
> CONFIG_TCP_CONG_BIC=y
>
> #
> # IP: Virtual Server Configuration
> #
> # CONFIG_IP_VS is not set
> CONFIG_IPV6=y
> # CONFIG_IPV6_PRIVACY is not set
> # CONFIG_INET6_AH is not set
> # CONFIG_INET6_ESP is not set
> # CONFIG_INET6_IPCOMP is not set
> CONFIG_INET6_TUNNEL=y
> # CONFIG_IPV6_TUNNEL is not set
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
> # CONFIG_NETFILTER_NETLINK is not set
>
> #
> # IP: Netfilter Configuration
> #
> CONFIG_IP_NF_CONNTRACK=y
> # CONFIG_IP_NF_CT_ACCT is not set
> # CONFIG_IP_NF_CONNTRACK_MARK is not set
> # CONFIG_IP_NF_CONNTRACK_EVENTS is not set
> # CONFIG_IP_NF_CT_PROTO_SCTP is not set
> # CONFIG_IP_NF_FTP is not set
> # CONFIG_IP_NF_IRC is not set
> # CONFIG_IP_NF_NETBIOS_NS is not set
> # CONFIG_IP_NF_TFTP is not set
> # CONFIG_IP_NF_AMANDA is not set
> # CONFIG_IP_NF_PPTP is not set
> CONFIG_IP_NF_QUEUE=y
> CONFIG_IP_NF_IPTABLES=y
> CONFIG_IP_NF_MATCH_LIMIT=y
> CONFIG_IP_NF_MATCH_IPRANGE=y
> CONFIG_IP_NF_MATCH_MAC=y
> CONFIG_IP_NF_MATCH_PKTTYPE=y
> CONFIG_IP_NF_MATCH_MARK=y
> CONFIG_IP_NF_MATCH_MULTIPORT=y
> CONFIG_IP_NF_MATCH_TOS=y
> CONFIG_IP_NF_MATCH_RECENT=y
> CONFIG_IP_NF_MATCH_ECN=y
> CONFIG_IP_NF_MATCH_DSCP=y
> CONFIG_IP_NF_MATCH_AH_ESP=y
> CONFIG_IP_NF_MATCH_LENGTH=y
> CONFIG_IP_NF_MATCH_TTL=y
> CONFIG_IP_NF_MATCH_TCPMSS=y
> # CONFIG_IP_NF_MATCH_STEALTH is not set
> CONFIG_IP_NF_MATCH_HELPER=y
> CONFIG_IP_NF_MATCH_STATE=y
> CONFIG_IP_NF_MATCH_CONNTRACK=y
> CONFIG_IP_NF_MATCH_OWNER=y
> # CONFIG_IP_NF_MATCH_ADDRTYPE is not set
> # CONFIG_IP_NF_MATCH_REALM is not set
> # CONFIG_IP_NF_MATCH_SCTP is not set
> # CONFIG_IP_NF_MATCH_DCCP is not set
> # CONFIG_IP_NF_MATCH_COMMENT is not set
> # CONFIG_IP_NF_MATCH_HASHLIMIT is not set
> # CONFIG_IP_NF_MATCH_STRING is not set
> CONFIG_IP_NF_FILTER=y
> CONFIG_IP_NF_TARGET_REJECT=y
> CONFIG_IP_NF_TARGET_LOG=y
> CONFIG_IP_NF_TARGET_ULOG=y
> CONFIG_IP_NF_TARGET_TCPMSS=y
> # CONFIG_IP_NF_TARGET_NFQUEUE is not set
> CONFIG_IP_NF_NAT=y
> CONFIG_IP_NF_NAT_NEEDED=y
> CONFIG_IP_NF_TARGET_MASQUERADE=y
> CONFIG_IP_NF_TARGET_REDIRECT=y
> CONFIG_IP_NF_TARGET_NETMAP=y
> CONFIG_IP_NF_TARGET_SAME=y
> # CONFIG_IP_NF_NAT_SNMP_BASIC is not set
> CONFIG_IP_NF_MANGLE=y
> CONFIG_IP_NF_TARGET_TOS=y
> CONFIG_IP_NF_TARGET_ECN=y
> CONFIG_IP_NF_TARGET_DSCP=y
> CONFIG_IP_NF_TARGET_MARK=y
> CONFIG_IP_NF_TARGET_CLASSIFY=y
> # CONFIG_IP_NF_TARGET_TTL is not set
> CONFIG_IP_NF_RAW=y
> CONFIG_IP_NF_TARGET_NOTRACK=y
> CONFIG_IP_NF_ARPTABLES=y
> CONFIG_IP_NF_ARPFILTER=y
> CONFIG_IP_NF_ARP_MANGLE=y
>
> #
> # IPv6: Netfilter Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP6_NF_QUEUE is not set
> # CONFIG_IP6_NF_IPTABLES is not set
>
> #
> # DCCP Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP_DCCP is not set
>
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP_SCTP is not set
> # CONFIG_ATM is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_DECNET is not set
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_SCHED is not set
> # CONFIG_NET_CLS_ROUTE is not set
>
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_IRDA is not set
> # CONFIG_BT is not set
> # CONFIG_IEEE80211 is not set
>
> #
> # Device Drivers
> #
>
> #
> # Generic Driver Options
> #
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_FW_LOADER=y
>
> #
> # Connector - unified userspace <-> kernelspace linker
> #
> # CONFIG_CONNECTOR is not set
>
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
>
> #
> # Parallel port support
> #
> # CONFIG_PARPORT is not set
>
> #
> # Plug and Play support
> #
> CONFIG_PNP=y
> # CONFIG_PNP_DEBUG is not set
>
> #
> # Protocols
> #
> CONFIG_PNPACPI=y
>
> #
> # Block devices
> #
> # CONFIG_BLK_DEV_FD is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=y
> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_SX8 is not set
> # CONFIG_BLK_DEV_RAM is not set
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_LBD=y
> # CONFIG_CDROM_PKTCDVD is not set
>
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> # CONFIG_ATA_OVER_ETH is not set
>
> #
> # ATA/ATAPI/MFM/RLL support
> #
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=y
>
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_IDE_SATA is not set
> # CONFIG_BLK_DEV_HD_IDE is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> CONFIG_BLK_DEV_IDECD=y
> # CONFIG_BLK_DEV_IDETAPE is not set
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> # CONFIG_BLK_DEV_IDESCSI is not set
> # CONFIG_IDE_TASK_IOCTL is not set
>
> #
> # IDE chipset support/bugfixes
> #
> CONFIG_IDE_GENERIC=y
> CONFIG_BLK_DEV_CMD640=y
> # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
> # CONFIG_BLK_DEV_IDEPNP is not set
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> # CONFIG_BLK_DEV_OFFBOARD is not set
> CONFIG_BLK_DEV_GENERIC=y
> # CONFIG_BLK_DEV_OPTI621 is not set
> CONFIG_BLK_DEV_RZ1000=y
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> # CONFIG_BLK_DEV_AMD74XX is not set
> # CONFIG_BLK_DEV_ATIIXP is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> CONFIG_BLK_DEV_PIIX=y
> # CONFIG_BLK_DEV_IT821X is not set
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIIMAGE is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> # CONFIG_BLK_DEV_VIA82CXXX is not set
> # CONFIG_IDE_ARM is not set
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_IDEDMA_IVB is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_BLK_DEV_HD is not set
>
> #
> # SCSI device support
> #
> CONFIG_RAID_ATTRS=y
> CONFIG_SCSI=y
> CONFIG_SCSI_PROC_FS=y
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> # CONFIG_BLK_DEV_SR is not set
> # CONFIG_CHR_DEV_SG is not set
> # CONFIG_CHR_DEV_SCH is not set
>
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> # CONFIG_SCSI_MULTI_LUN is not set
> # CONFIG_SCSI_CONSTANTS is not set
> # CONFIG_SCSI_LOGGING is not set
>
> #
> # SCSI Transport Attributes
> #
> # CONFIG_SCSI_SPI_ATTRS is not set
> # CONFIG_SCSI_FC_ATTRS is not set
> # CONFIG_SCSI_ISCSI_ATTRS is not set
> # CONFIG_SCSI_SAS_ATTRS is not set
>
> #
> # SCSI low-level drivers
> #
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_3W_9XXX is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AACRAID is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_AIC79XX is not set
> # CONFIG_MEGARAID_NEWGEN is not set
> # CONFIG_MEGARAID_LEGACY is not set
> # CONFIG_MEGARAID_SAS is not set
> CONFIG_SCSI_SATA=y
> # CONFIG_SCSI_SATA_AHCI is not set
> # CONFIG_SCSI_SATA_SVW is not set
> CONFIG_SCSI_ATA_PIIX=y
> # CONFIG_SCSI_SATA_MV is not set
> # CONFIG_SCSI_SATA_NV is not set
> # CONFIG_SCSI_SATA_PROMISE is not set
> # CONFIG_SCSI_SATA_QSTOR is not set
> CONFIG_SCSI_SATA_SX4=y
> # CONFIG_SCSI_SATA_SIL is not set
> CONFIG_SCSI_SATA_SIS=y
> # CONFIG_SCSI_SATA_ULI is not set
> # CONFIG_SCSI_SATA_VIA is not set
> # CONFIG_SCSI_SATA_VITESSE is not set
> CONFIG_SCSI_SATA_INTEL_COMBINED=y
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> CONFIG_SCSI_GDTH=y
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> CONFIG_SCSI_IPR=y
> # CONFIG_SCSI_IPR_TRACE is not set
> # CONFIG_SCSI_IPR_DUMP is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> CONFIG_SCSI_QLA2XXX=y
> # CONFIG_SCSI_QLA21XX is not set
> # CONFIG_SCSI_QLA22XX is not set
> # CONFIG_SCSI_QLA2300 is not set
> # CONFIG_SCSI_QLA2322 is not set
> # CONFIG_SCSI_QLA6312 is not set
> # CONFIG_SCSI_QLA24XX is not set
> # CONFIG_SCSI_LPFC is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_DEBUG is not set
>
> #
> # Multi-device support (RAID and LVM)
> #
> CONFIG_MD=y
> CONFIG_BLK_DEV_MD=y
> CONFIG_MD_LINEAR=y
> CONFIG_MD_RAID0=y
> CONFIG_MD_RAID1=y
> CONFIG_MD_RAID10=y
> CONFIG_MD_RAID5=y
> CONFIG_MD_RAID6=y
> # CONFIG_MD_MULTIPATH is not set
> # CONFIG_MD_FAULTY is not set
> # CONFIG_BLK_DEV_DM is not set
>
> #
> # Fusion MPT device support
> #
> CONFIG_FUSION=y
> CONFIG_FUSION_SPI=y
> # CONFIG_FUSION_FC is not set
> # CONFIG_FUSION_SAS is not set
> CONFIG_FUSION_MAX_SGE=128
> # CONFIG_FUSION_CTL is not set
>
> #
> # IEEE 1394 (FireWire) support
> #
> # CONFIG_IEEE1394 is not set
>
> #
> # I2O device support
> #
> # CONFIG_I2O is not set
>
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
> CONFIG_DUMMY=y
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> # CONFIG_NET_SB1000 is not set
>
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
>
> #
> # PHY device support
> #
> # CONFIG_PHYLIB is not set
>
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=y
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> # CONFIG_CASSINI is not set
> # CONFIG_NET_VENDOR_3COM is not set
>
> #
> # Tulip family network device support
> #
> # CONFIG_NET_TULIP is not set
> # CONFIG_HP100 is not set
> CONFIG_NET_PCI=y
> # CONFIG_PCNET32 is not set
> # CONFIG_AMD8111_ETH is not set
> # CONFIG_ADAPTEC_STARFIRE is not set
> # CONFIG_B44 is not set
> # CONFIG_FORCEDETH is not set
> # CONFIG_DGRS is not set
> # CONFIG_EEPRO100 is not set
> CONFIG_E100=y
> # CONFIG_FEALNX is not set
> # CONFIG_NATSEMI is not set
> # CONFIG_NE2K_PCI is not set
> # CONFIG_8139CP is not set
> # CONFIG_8139TOO is not set
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_VIA_RHINE is not set
>
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> CONFIG_E1000=y
> CONFIG_E1000_NAPI=y
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SIS190 is not set
> # CONFIG_SKGE is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_VIA_VELOCITY is not set
> # CONFIG_TIGON3 is not set
> # CONFIG_BNX2 is not set
>
> #
> # Ethernet (10000 Mbit)
> #
> # CONFIG_CHELSIO_T1 is not set
> # CONFIG_IXGB is not set
> # CONFIG_S2IO is not set
>
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
>
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
>
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
> # CONFIG_NET_FC is not set
> # CONFIG_SHAPER is not set
> # CONFIG_NETCONSOLE is not set
> # CONFIG_NETPOLL is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
>
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN is not set
>
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_TSDEV is not set
> # CONFIG_INPUT_EVDEV is not set
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> # CONFIG_INPUT_MOUSE is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_INPUT_MISC is not set
>
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> # CONFIG_SERIO_SERPORT is not set
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PCIPS2 is not set
> CONFIG_SERIO_LIBPS2=y
> # CONFIG_SERIO_RAW is not set
> # CONFIG_GAMEPORT is not set
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_SERIAL_NONSTANDARD is not set
>
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> # CONFIG_SERIAL_8250_CONSOLE is not set
> # CONFIG_SERIAL_8250_ACPI is not set
> CONFIG_SERIAL_8250_NR_UARTS=4
> # CONFIG_SERIAL_8250_EXTENDED is not set
>
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> # CONFIG_SERIAL_JSM is not set
> CONFIG_UNIX98_PTYS=y
> CONFIG_LEGACY_PTYS=y
> CONFIG_LEGACY_PTY_COUNT=256
>
> #
> # IPMI
> #
> # CONFIG_IPMI_HANDLER is not set
>
> #
> # Watchdog Cards
> #
> CONFIG_WATCHDOG=y
> # CONFIG_WATCHDOG_NOWAYOUT is not set
>
> #
> # Watchdog Device Drivers
> #
> # CONFIG_SOFT_WATCHDOG is not set
> # CONFIG_ACQUIRE_WDT is not set
> # CONFIG_ADVANTECH_WDT is not set
> # CONFIG_ALIM1535_WDT is not set
> # CONFIG_ALIM7101_WDT is not set
> # CONFIG_SC520_WDT is not set
> # CONFIG_EUROTECH_WDT is not set
> # CONFIG_IB700_WDT is not set
> # CONFIG_IBMASR is not set
> # CONFIG_WAFER_WDT is not set
> CONFIG_I6300ESB_WDT=y
> # CONFIG_I8XX_TCO is not set
> # CONFIG_SC1200_WDT is not set
> # CONFIG_60XX_WDT is not set
> # CONFIG_SBC8360_WDT is not set
> # CONFIG_CPU5_WDT is not set
> # CONFIG_W83627HF_WDT is not set
> # CONFIG_W83877F_WDT is not set
> # CONFIG_W83977F_WDT is not set
> # CONFIG_MACHZ_WDT is not set
>
> #
> # PCI-based Watchdog Cards
> #
> # CONFIG_PCIPCWATCHDOG is not set
> # CONFIG_WDTPCI is not set
> # CONFIG_HW_RANDOM is not set
> # CONFIG_NVRAM is not set
> # CONFIG_RTC is not set
> # CONFIG_GEN_RTC is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
>
> #
> # Ftape, the floppy tape device driver
> #
> CONFIG_AGP=y
> CONFIG_AGP_AMD64=y
> # CONFIG_AGP_INTEL is not set
> # CONFIG_DRM is not set
> # CONFIG_MWAVE is not set
> # CONFIG_RAW_DRIVER is not set
> # CONFIG_HPET is not set
> # CONFIG_HANGCHECK_TIMER is not set
>
> #
> # TPM devices
> #
> # CONFIG_TCG_TPM is not set
>
> #
> # I2C support
> #
> CONFIG_I2C=y
> CONFIG_I2C_CHARDEV=y
>
> #
> # I2C Algorithms
> #
> CONFIG_I2C_ALGOBIT=y
> # CONFIG_I2C_ALGOPCF is not set
> # CONFIG_I2C_ALGOPCA is not set
>
> #
> # I2C Hardware Bus support
> #
> # CONFIG_I2C_ALI1535 is not set
> # CONFIG_I2C_ALI1563 is not set
> # CONFIG_I2C_ALI15X3 is not set
> # CONFIG_I2C_AMD756 is not set
> # CONFIG_I2C_AMD8111 is not set
> CONFIG_I2C_I801=y
> CONFIG_I2C_I810=y
> CONFIG_I2C_PIIX4=y
> # CONFIG_I2C_NFORCE2 is not set
> # CONFIG_I2C_PARPORT_LIGHT is not set
> # CONFIG_I2C_PROSAVAGE is not set
> # CONFIG_I2C_SAVAGE4 is not set
> # CONFIG_SCx200_ACB is not set
> # CONFIG_I2C_SIS5595 is not set
> # CONFIG_I2C_SIS630 is not set
> # CONFIG_I2C_SIS96X is not set
> # CONFIG_I2C_VIA is not set
> # CONFIG_I2C_VIAPRO is not set
> # CONFIG_I2C_VOODOO3 is not set
> # CONFIG_I2C_PCA_ISA is not set
>
> #
> # Miscellaneous I2C Chip support
> #
> # CONFIG_SENSORS_DS1337 is not set
> # CONFIG_SENSORS_DS1374 is not set
> # CONFIG_SENSORS_EEPROM is not set
> # CONFIG_SENSORS_PCF8574 is not set
> # CONFIG_SENSORS_PCA9539 is not set
> # CONFIG_SENSORS_PCF8591 is not set
> # CONFIG_SENSORS_RTC8564 is not set
> # CONFIG_SENSORS_MAX6875 is not set
> # CONFIG_I2C_DEBUG_CORE is not set
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> # CONFIG_I2C_DEBUG_CHIP is not set
>
> #
> # Dallas's 1-wire bus
> #
> # CONFIG_W1 is not set
>
> #
> # Hardware Monitoring support
> #
> CONFIG_HWMON=y
> # CONFIG_HWMON_VID is not set
> # CONFIG_SENSORS_ADM1021 is not set
> # CONFIG_SENSORS_ADM1025 is not set
> # CONFIG_SENSORS_ADM1026 is not set
> # CONFIG_SENSORS_ADM1031 is not set
> # CONFIG_SENSORS_ADM9240 is not set
> # CONFIG_SENSORS_ASB100 is not set
> # CONFIG_SENSORS_ATXP1 is not set
> # CONFIG_SENSORS_DS1621 is not set
> # CONFIG_SENSORS_FSCHER is not set
> # CONFIG_SENSORS_FSCPOS is not set
> # CONFIG_SENSORS_GL518SM is not set
> # CONFIG_SENSORS_GL520SM is not set
> # CONFIG_SENSORS_IT87 is not set
> # CONFIG_SENSORS_LM63 is not set
> # CONFIG_SENSORS_LM75 is not set
> # CONFIG_SENSORS_LM77 is not set
> # CONFIG_SENSORS_LM78 is not set
> # CONFIG_SENSORS_LM80 is not set
> # CONFIG_SENSORS_LM83 is not set
> # CONFIG_SENSORS_LM85 is not set
> # CONFIG_SENSORS_LM87 is not set
> # CONFIG_SENSORS_LM90 is not set
> # CONFIG_SENSORS_LM92 is not set
> # CONFIG_SENSORS_MAX1619 is not set
> # CONFIG_SENSORS_PC87360 is not set
> # CONFIG_SENSORS_SIS5595 is not set
> # CONFIG_SENSORS_SMSC47M1 is not set
> # CONFIG_SENSORS_SMSC47B397 is not set
> # CONFIG_SENSORS_VIA686A is not set
> # CONFIG_SENSORS_W83781D is not set
> # CONFIG_SENSORS_W83792D is not set
> # CONFIG_SENSORS_W83L785TS is not set
> # CONFIG_SENSORS_W83627HF is not set
> # CONFIG_SENSORS_W83627EHF is not set
> # CONFIG_SENSORS_HDAPS is not set
> # CONFIG_HWMON_DEBUG_CHIP is not set
>
> #
> # Misc devices
> #
> # CONFIG_IBM_ASM is not set
>
> #
> # Multimedia Capabilities Port drivers
> #
>
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
>
> #
> # Digital Video Broadcasting Devices
> #
> # CONFIG_DVB is not set
>
> #
> # Graphics support
> #
> # CONFIG_FB is not set
> # CONFIG_VIDEO_SELECT is not set
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_DUMMY_CONSOLE=y
>
> #
> # Sound
> #
> # CONFIG_SOUND is not set
>
> #
> # USB support
> #
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB_ARCH_HAS_OHCI=y
> # CONFIG_USB is not set
>
> #
> # USB Gadget Support
> #
> # CONFIG_USB_GADGET is not set
>
> #
> # MMC/SD Card support
> #
> # CONFIG_MMC is not set
>
> #
> # InfiniBand support
> #
> # CONFIG_INFINIBAND is not set
>
> #
> # SN Devices
> #
>
> #
> # Firmware Drivers
> #
> # CONFIG_EDD is not set
> # CONFIG_DELL_RBU is not set
> # CONFIG_DCDBAS is not set
>
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> # CONFIG_EXT2_FS_XATTR is not set
> # CONFIG_EXT2_FS_XIP is not set
> CONFIG_EXT3_FS=y
> CONFIG_EXT3_FS_XATTR=y
> # CONFIG_EXT3_FS_POSIX_ACL is not set
> # CONFIG_EXT3_FS_SECURITY is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> CONFIG_FS_POSIX_ACL=y
> # CONFIG_XFS_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_INOTIFY=y
> # CONFIG_QUOTA is not set
> CONFIG_DNOTIFY=y
> # CONFIG_AUTOFS_FS is not set
> CONFIG_AUTOFS4_FS=y
> # CONFIG_FUSE_FS is not set
>
> #
> # CD-ROM/DVD Filesystems
> #
> # CONFIG_ISO9660_FS is not set
> # CONFIG_UDF_FS is not set
>
> #
> # DOS/FAT/NT Filesystems
> #
> # CONFIG_MSDOS_FS is not set
> # CONFIG_VFAT_FS is not set
> # CONFIG_NTFS_FS is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> # CONFIG_HUGETLBFS is not set
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_RAMFS=y
> # CONFIG_RELAYFS_FS is not set
>
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_SQUASHFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
>
> #
> # Network File Systems
> #
> CONFIG_NFS_FS=y
> CONFIG_NFS_V3=y
> # CONFIG_NFS_V3_ACL is not set
> CONFIG_NFS_V4=y
> # CONFIG_NFS_DIRECTIO is not set
> CONFIG_NFSD=y
> CONFIG_NFSD_V3=y
> # CONFIG_NFSD_V3_ACL is not set
> CONFIG_NFSD_V4=y
> CONFIG_NFSD_TCP=y
> CONFIG_LOCKD=y
> CONFIG_LOCKD_V4=y
> CONFIG_EXPORTFS=y
> CONFIG_NFS_COMMON=y
> CONFIG_SUNRPC=y
> CONFIG_SUNRPC_GSS=y
> CONFIG_RPCSEC_GSS_KRB5=y
> # CONFIG_RPCSEC_GSS_SPKM3 is not set
> # CONFIG_SMB_FS is not set
> # CONFIG_CIFS is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_AFS_FS is not set
> # CONFIG_9P_FS is not set
>
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
>
> #
> # Native Language Support
> #
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="utf8"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> CONFIG_NLS_CODEPAGE_850=y
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> CONFIG_NLS_ASCII=y
> CONFIG_NLS_ISO8859_1=y
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> CONFIG_NLS_ISO8859_15=y
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> CONFIG_NLS_UTF8=y
>
> #
> # Profiling support
> #
> # CONFIG_PROFILING is not set
>
> #
> # Kernel hacking
> #
> # CONFIG_PRINTK_TIME is not set
> # CONFIG_DEBUG_KERNEL is not set
> CONFIG_LOG_BUF_SHIFT=15
>
> #
> # Security options
> #
>
> #
> # PaX
> #
> CONFIG_PAX=y
>
> #
> # PaX Control
> #
> # CONFIG_PAX_SOFTMODE is not set
> CONFIG_PAX_EI_PAX=y
> CONFIG_PAX_PT_PAX_FLAGS=y
> # CONFIG_PAX_NO_ACL_FLAGS is not set
> CONFIG_PAX_HAVE_ACL_FLAGS=y
> # CONFIG_PAX_HOOK_ACL_FLAGS is not set
>
> #
> # Non-executable pages
> #
> CONFIG_PAX_NOEXEC=y
> # CONFIG_PAX_PAGEEXEC is not set
>
> #
> # Address Space Layout Randomization
> #
> CONFIG_PAX_ASLR=y
> CONFIG_PAX_RANDUSTACK=y
> CONFIG_PAX_RANDMMAP=y
>
> #
> # Grsecurity
> #
> CONFIG_GRKERNSEC=y
> # CONFIG_GRKERNSEC_LOW is not set
> # CONFIG_GRKERNSEC_MEDIUM is not set
> # CONFIG_GRKERNSEC_HIGH is not set
> CONFIG_GRKERNSEC_CUSTOM=y
>
> #
> # Address Space Protection
> #
> # CONFIG_GRKERNSEC_KMEM is not set
> # CONFIG_GRKERNSEC_IO is not set
> # CONFIG_GRKERNSEC_PROC_MEMMAP is not set
> # CONFIG_GRKERNSEC_BRUTE is not set
> CONFIG_GRKERNSEC_HIDESYM=y
>
> #
> # Role Based Access Control Options
> #
> CONFIG_GRKERNSEC_ACL_HIDEKERN=y
> CONFIG_GRKERNSEC_ACL_MAXTRIES=3
> CONFIG_GRKERNSEC_ACL_TIMEOUT=30
>
> #
> # Filesystem Protections
> #
> CONFIG_GRKERNSEC_PROC=y
> # CONFIG_GRKERNSEC_PROC_USER is not set
> CONFIG_GRKERNSEC_PROC_USERGROUP=y
> CONFIG_GRKERNSEC_PROC_GID=10
> CONFIG_GRKERNSEC_PROC_ADD=y
> CONFIG_GRKERNSEC_LINK=y
> CONFIG_GRKERNSEC_FIFO=y
> CONFIG_GRKERNSEC_CHROOT=y
> CONFIG_GRKERNSEC_CHROOT_MOUNT=y
> CONFIG_GRKERNSEC_CHROOT_DOUBLE=y
> CONFIG_GRKERNSEC_CHROOT_PIVOT=y
> CONFIG_GRKERNSEC_CHROOT_CHDIR=y
> CONFIG_GRKERNSEC_CHROOT_CHMOD=y
> CONFIG_GRKERNSEC_CHROOT_FCHDIR=y
> CONFIG_GRKERNSEC_CHROOT_MKNOD=y
> CONFIG_GRKERNSEC_CHROOT_SHMAT=y
> CONFIG_GRKERNSEC_CHROOT_UNIX=y
> CONFIG_GRKERNSEC_CHROOT_FINDTASK=y
> CONFIG_GRKERNSEC_CHROOT_NICE=y
> CONFIG_GRKERNSEC_CHROOT_SYSCTL=y
> CONFIG_GRKERNSEC_CHROOT_CAPS=y
>
> #
> # Kernel Auditing
> #
> # CONFIG_GRKERNSEC_AUDIT_GROUP is not set
> CONFIG_GRKERNSEC_EXECLOG=y
> CONFIG_GRKERNSEC_RESLOG=y
> CONFIG_GRKERNSEC_CHROOT_EXECLOG=y
> CONFIG_GRKERNSEC_AUDIT_CHDIR=y
> CONFIG_GRKERNSEC_AUDIT_MOUNT=y
> CONFIG_GRKERNSEC_AUDIT_IPC=y
> CONFIG_GRKERNSEC_SIGNAL=y
> CONFIG_GRKERNSEC_FORKFAIL=y
> CONFIG_GRKERNSEC_TIME=y
> CONFIG_GRKERNSEC_PROC_IPADDR=y
>
> #
> # Executable Protections
> #
> CONFIG_GRKERNSEC_EXECVE=y
> # CONFIG_GRKERNSEC_SHM is not set
> CONFIG_GRKERNSEC_DMESG=y
> CONFIG_GRKERNSEC_RANDPID=y
> CONFIG_GRKERNSEC_TPE=y
> CONFIG_GRKERNSEC_TPE_ALL=y
> # CONFIG_GRKERNSEC_TPE_INVERT is not set
> CONFIG_GRKERNSEC_TPE_GID=100
>
> #
> # Network Protections
> #
> CONFIG_GRKERNSEC_RANDNET=y
> CONFIG_GRKERNSEC_RANDSRC=y
> # CONFIG_GRKERNSEC_SOCKET is not set
>
> #
> # Sysctl support
> #
> CONFIG_GRKERNSEC_SYSCTL=y
> # CONFIG_GRKERNSEC_SYSCTL_ON is not set
>
> #
> # Logging Options
> #
> CONFIG_GRKERNSEC_FLOODTIME=10
> CONFIG_GRKERNSEC_FLOODBURST=4
> # CONFIG_KEYS is not set
> # CONFIG_SECURITY is not set
>
> #
> # Cryptographic options
> #
> CONFIG_CRYPTO=y
> # CONFIG_CRYPTO_HMAC is not set
> # CONFIG_CRYPTO_NULL is not set
> # CONFIG_CRYPTO_MD4 is not set
> CONFIG_CRYPTO_MD5=y
> # CONFIG_CRYPTO_SHA1 is not set
> CONFIG_CRYPTO_SHA256=y
> # CONFIG_CRYPTO_SHA512 is not set
> # CONFIG_CRYPTO_WP512 is not set
> # CONFIG_CRYPTO_TGR192 is not set
> CONFIG_CRYPTO_DES=y
> # CONFIG_CRYPTO_BLOWFISH is not set
> # CONFIG_CRYPTO_TWOFISH is not set
> # CONFIG_CRYPTO_SERPENT is not set
> # CONFIG_CRYPTO_AES_X86_64 is not set
> # CONFIG_CRYPTO_CAST5 is not set
> # CONFIG_CRYPTO_CAST6 is not set
> # CONFIG_CRYPTO_TEA is not set
> # CONFIG_CRYPTO_ARC4 is not set
> # CONFIG_CRYPTO_KHAZAD is not set
> # CONFIG_CRYPTO_ANUBIS is not set
> # CONFIG_CRYPTO_DEFLATE is not set
> # CONFIG_CRYPTO_MICHAEL_MIC is not set
> # CONFIG_CRYPTO_CRC32C is not set
> # CONFIG_CRYPTO_TEST is not set
>
> #
> # Hardware crypto devices
> #
>
> #
> # Library routines
> #
> # CONFIG_CRC_CCITT is not set
> # CONFIG_CRC16 is not set
> CONFIG_CRC32=y
> CONFIG_LIBCRC32C=y
>
> --
> gentoo-user@gentoo.org mailing list
>
>
[-- Attachment #2: Type: text/html, Size: 37169 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user] Only one processor ?
2006-03-28 14:41 ` Fernando Antunes
@ 2006-03-28 14:57 ` Keats
2006-03-28 16:30 ` Fernando Antunes
0 siblings, 1 reply; 14+ messages in thread
From: Keats @ 2006-03-28 14:57 UTC (permalink / raw
To: gentoo-user
on the dual xeon :
dbthemof ~ # cat /proc/interrupts
CPU0 CPU1
0: 21779945 0 IO-APIC-edge timer
9: 0 0 IO-APIC-level acpi
17: 706168 0 IO-APIC-level eth0
18: 682541 0 IO-APIC-level eth1
20: 38497 0 IO-APIC-level ioc0
NMI: 326 306
LOC: 21780616 21780594
ERR: 1
on the unique xeon :
themof ~ # cat /proc/interrupts
CPU0 CPU1
0: 64 63663212 IO-APIC-edge timer
9: 0 0 IO-APIC-level acpi
17: 0 1941736 IO-APIC-level eth0
18: 0 3412335 IO-APIC-level eth1
20: 0 289043 IO-APIC-level ioc0
NMI: 12808 12788
LOC: 63665314 63665291
ERR: 1
MIS: 0
Le mardi 28 mars 2006 à 11:41 -0300, Fernando Antunes a écrit :
> Please, do a cat /proc/interrupts.
>
> How many CPU columns do you see ?
>
> On 3/28/06, Keats <neokeats@wanadoo.fr> wrote:
> Hi,
> on a recent gentoo installation,
> i ve noticed that i have only one of my processor detected...
> i have dual xeon ht so i should have 4 processors detected but
> i only
> have two, like on my xeon ht...
> physical id : 0 for the two processors detected means that
> only one
> physicval processor is detected...
>
> themof ~ # cat /proc/cpuinfo
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 15
> model : 4
> model name : Intel(R) Xeon(TM) CPU
> 3.20GHz
> stepping : 1
> cpu MHz : 3200.244
> cache size : 1024 KB
> physical id : 0
> siblings : 2
> core id : 0
> cpu cores : 1
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep
> mtrr pge mca cmov
> pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall
> lm
> constant_tsc pni monitor ds_cpl cid cx16 xtpr
> bogomips : 6409.60
> clflush size : 64
> cache_alignment : 128
> address sizes : 36 bits physical, 48 bits virtual
> power management:
>
> processor : 1
> vendor_id : GenuineIntel
> cpu family : 15
> model : 4
> model name : Intel(R) Xeon(TM) CPU
> 3.20GHz
> stepping : 1
> cpu MHz : 3200.244
> cache size : 1024 KB
> physical id : 0
> siblings : 2
> core id : 0
> cpu cores : 1
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep
> mtrr pge mca cmov
> pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall
> lm
> constant_tsc pni monitor ds_cpl cid cx16 xtpr
> bogomips : 6400.78
> clflush size : 64
> cache_alignment : 128
> address sizes : 36 bits physical, 48 bits virtual
> power management:
>
> here is my headless config file, i removed a lot of things
> cause it's
> only a server... so i don't need usb and things like that...
> any help is welcome :)
> thanx
>
> #
> # Automatically generated make config: don't edit
> # Linux kernel version: 2.6.14-hardened-r6
> # Mon Mar 27 16:16:52 2006
> #
> CONFIG_X86_64=y
> CONFIG_64BIT=y
> CONFIG_X86=y
> CONFIG_SEMAPHORE_SLEEPERS=y
> CONFIG_MMU=y
> CONFIG_RWSEM_GENERIC_SPINLOCK=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_X86_CMPXCHG=y
> CONFIG_EARLY_PRINTK=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_IOMAP=y
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_CLEAN_COMPILE=y
> CONFIG_LOCK_KERNEL=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
>
> #
> # General setup
> #
> CONFIG_LOCALVERSION=""
> CONFIG_LOCALVERSION_AUTO=y
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_POSIX_MQUEUE=y
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_SYSCTL=y
> CONFIG_AUDIT=y
> CONFIG_AUDITSYSCALL=y
> CONFIG_HOTPLUG=y
> CONFIG_KOBJECT_UEVENT=y
> CONFIG_IKCONFIG=y
> CONFIG_IKCONFIG_PROC=y
> # CONFIG_CPUSETS is not set
> CONFIG_INITRAMFS_SOURCE=""
> # CONFIG_EMBEDDED is not set
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_SHMEM=y
> CONFIG_CC_ALIGN_FUNCTIONS=0
> CONFIG_CC_ALIGN_LABELS=0
> CONFIG_CC_ALIGN_LOOPS=0
> CONFIG_CC_ALIGN_JUMPS=0
> # CONFIG_TINY_SHMEM is not set
> CONFIG_BASE_SMALL=0
>
> #
> # Loadable module support
> #
> # CONFIG_MODULES is not set
> CONFIG_STOP_MACHINE=y
>
> #
> # Processor type and features
> #
> # CONFIG_MK8 is not set
> CONFIG_MPSC=y
> # CONFIG_GENERIC_CPU is not set
> CONFIG_X86_L1_CACHE_BYTES=128
> CONFIG_X86_L1_CACHE_SHIFT=7
> CONFIG_X86_TSC=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_MICROCODE=y
> CONFIG_X86_MSR=y
> CONFIG_X86_CPUID=y
> CONFIG_X86_HT=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_MTRR=y
> CONFIG_SMP=y
> CONFIG_SCHED_SMT=y
> # CONFIG_PREEMPT_NONE is not set
> # CONFIG_PREEMPT_VOLUNTARY is not set
> CONFIG_PREEMPT=y
> CONFIG_PREEMPT_BKL=y
> # CONFIG_K8_NUMA is not set
> # CONFIG_NUMA_EMU is not set
> # CONFIG_NUMA is not set
> CONFIG_ARCH_FLATMEM_ENABLE=y
> CONFIG_SELECT_MEMORY_MODEL=y
> CONFIG_FLATMEM_MANUAL=y
> # CONFIG_DISCONTIGMEM_MANUAL is not set
> # CONFIG_SPARSEMEM_MANUAL is not set
> CONFIG_FLATMEM=y
> CONFIG_FLAT_NODE_MEM_MAP=y
> # CONFIG_SPARSEMEM_STATIC is not set
> CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
> CONFIG_NR_CPUS=8
> CONFIG_HOTPLUG_CPU=y
> CONFIG_HPET_TIMER=y
> # CONFIG_X86_PM_TIMER is not set
> CONFIG_GART_IOMMU=y
> CONFIG_SWIOTLB=y
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_INTEL=y
> CONFIG_PHYSICAL_START=0x100000
> # CONFIG_KEXEC is not set
> CONFIG_SECCOMP=y
> # CONFIG_HZ_100 is not set
> CONFIG_HZ_250=y
> # CONFIG_HZ_1000 is not set
> CONFIG_HZ=250
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_ISA_DMA_API=y
> CONFIG_GENERIC_PENDING_IRQ=y
>
> #
> # Power management options
> #
> CONFIG_PM=y
> # CONFIG_PM_DEBUG is not set
> # CONFIG_SOFTWARE_SUSPEND is not set
> CONFIG_SUSPEND_SMP=y
>
> #
> # ACPI (Advanced Configuration and Power Interface) Support
> #
> CONFIG_ACPI=y
> CONFIG_ACPI_SLEEP=y
> CONFIG_ACPI_SLEEP_PROC_FS=y
> # CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
> CONFIG_ACPI_AC=y
> CONFIG_ACPI_BATTERY=y
> CONFIG_ACPI_BUTTON=y
> CONFIG_ACPI_VIDEO=y
> # CONFIG_ACPI_HOTKEY is not set
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_PROCESSOR=y
> CONFIG_ACPI_HOTPLUG_CPU=y
> CONFIG_ACPI_THERMAL=y
> # CONFIG_ACPI_ASUS is not set
> # CONFIG_ACPI_IBM is not set
> # CONFIG_ACPI_TOSHIBA is not set
> CONFIG_ACPI_BLACKLIST_YEAR=0
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_SYSTEM=y
> CONFIG_ACPI_CONTAINER=y
>
> #
> # CPU Frequency scaling
> #
> # CONFIG_CPU_FREQ is not set
>
> #
> # Bus options (PCI etc.)
> #
> CONFIG_PCI=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_MMCONFIG=y
> # CONFIG_UNORDERED_IO is not set
> CONFIG_PCIEPORTBUS=y
> # CONFIG_PCI_MSI is not set
> CONFIG_PCI_LEGACY_PROC=y
>
> #
> # PCCARD (PCMCIA/CardBus) support
> #
> # CONFIG_PCCARD is not set
>
> #
> # PCI Hotplug Support
> #
> # CONFIG_HOTPLUG_PCI is not set
>
> #
> # Executable file formats / Emulations
> #
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_MISC=y
> # CONFIG_IA32_EMULATION is not set
>
> #
> # Networking
> #
> CONFIG_NET=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> # CONFIG_PACKET_MMAP is not set
> CONFIG_UNIX=y
> CONFIG_XFRM=y
> # CONFIG_XFRM_USER is not set
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> # CONFIG_IP_ADVANCED_ROUTER is not set
> CONFIG_IP_FIB_HASH=y
> # CONFIG_IP_PNP is not set
> CONFIG_NET_IPIP=y
> # CONFIG_NET_IPGRE is not set
> # CONFIG_IP_MROUTE is not set
> # CONFIG_ARPD is not set
> # CONFIG_SYN_COOKIES is not set
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
> CONFIG_INET_TUNNEL=y
> CONFIG_INET_DIAG=y
> CONFIG_INET_TCP_DIAG=y
> # CONFIG_TCP_CONG_ADVANCED is not set
> CONFIG_TCP_CONG_BIC=y
>
> #
> # IP: Virtual Server Configuration
> #
> # CONFIG_IP_VS is not set
> CONFIG_IPV6=y
> # CONFIG_IPV6_PRIVACY is not set
> # CONFIG_INET6_AH is not set
> # CONFIG_INET6_ESP is not set
> # CONFIG_INET6_IPCOMP is not set
> CONFIG_INET6_TUNNEL=y
> # CONFIG_IPV6_TUNNEL is not set
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
> # CONFIG_NETFILTER_NETLINK is not set
>
> #
> # IP: Netfilter Configuration
> #
> CONFIG_IP_NF_CONNTRACK=y
> # CONFIG_IP_NF_CT_ACCT is not set
> # CONFIG_IP_NF_CONNTRACK_MARK is not set
> # CONFIG_IP_NF_CONNTRACK_EVENTS is not set
> # CONFIG_IP_NF_CT_PROTO_SCTP is not set
> # CONFIG_IP_NF_FTP is not set
> # CONFIG_IP_NF_IRC is not set
> # CONFIG_IP_NF_NETBIOS_NS is not set
> # CONFIG_IP_NF_TFTP is not set
> # CONFIG_IP_NF_AMANDA is not set
> # CONFIG_IP_NF_PPTP is not set
> CONFIG_IP_NF_QUEUE=y
> CONFIG_IP_NF_IPTABLES=y
> CONFIG_IP_NF_MATCH_LIMIT=y
> CONFIG_IP_NF_MATCH_IPRANGE=y
> CONFIG_IP_NF_MATCH_MAC=y
> CONFIG_IP_NF_MATCH_PKTTYPE=y
> CONFIG_IP_NF_MATCH_MARK=y
> CONFIG_IP_NF_MATCH_MULTIPORT=y
> CONFIG_IP_NF_MATCH_TOS=y
> CONFIG_IP_NF_MATCH_RECENT=y
> CONFIG_IP_NF_MATCH_ECN=y
> CONFIG_IP_NF_MATCH_DSCP=y
> CONFIG_IP_NF_MATCH_AH_ESP=y
> CONFIG_IP_NF_MATCH_LENGTH=y
> CONFIG_IP_NF_MATCH_TTL=y
> CONFIG_IP_NF_MATCH_TCPMSS=y
> # CONFIG_IP_NF_MATCH_STEALTH is not set
> CONFIG_IP_NF_MATCH_HELPER=y
> CONFIG_IP_NF_MATCH_STATE=y
> CONFIG_IP_NF_MATCH_CONNTRACK=y
> CONFIG_IP_NF_MATCH_OWNER=y
> # CONFIG_IP_NF_MATCH_ADDRTYPE is not set
> # CONFIG_IP_NF_MATCH_REALM is not set
> # CONFIG_IP_NF_MATCH_SCTP is not set
> # CONFIG_IP_NF_MATCH_DCCP is not set
> # CONFIG_IP_NF_MATCH_COMMENT is not set
> # CONFIG_IP_NF_MATCH_HASHLIMIT is not set
> # CONFIG_IP_NF_MATCH_STRING is not set
> CONFIG_IP_NF_FILTER=y
> CONFIG_IP_NF_TARGET_REJECT=y
> CONFIG_IP_NF_TARGET_LOG=y
> CONFIG_IP_NF_TARGET_ULOG=y
> CONFIG_IP_NF_TARGET_TCPMSS=y
> # CONFIG_IP_NF_TARGET_NFQUEUE is not set
> CONFIG_IP_NF_NAT=y
> CONFIG_IP_NF_NAT_NEEDED=y
> CONFIG_IP_NF_TARGET_MASQUERADE=y
> CONFIG_IP_NF_TARGET_REDIRECT=y
> CONFIG_IP_NF_TARGET_NETMAP=y
> CONFIG_IP_NF_TARGET_SAME=y
> # CONFIG_IP_NF_NAT_SNMP_BASIC is not set
> CONFIG_IP_NF_MANGLE=y
> CONFIG_IP_NF_TARGET_TOS=y
> CONFIG_IP_NF_TARGET_ECN=y
> CONFIG_IP_NF_TARGET_DSCP=y
> CONFIG_IP_NF_TARGET_MARK=y
> CONFIG_IP_NF_TARGET_CLASSIFY=y
> # CONFIG_IP_NF_TARGET_TTL is not set
> CONFIG_IP_NF_RAW=y
> CONFIG_IP_NF_TARGET_NOTRACK=y
> CONFIG_IP_NF_ARPTABLES=y
> CONFIG_IP_NF_ARPFILTER=y
> CONFIG_IP_NF_ARP_MANGLE=y
>
> #
> # IPv6: Netfilter Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP6_NF_QUEUE is not set
> # CONFIG_IP6_NF_IPTABLES is not set
>
> #
> # DCCP Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP_DCCP is not set
>
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP_SCTP is not set
> # CONFIG_ATM is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_DECNET is not set
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_SCHED is not set
> # CONFIG_NET_CLS_ROUTE is not set
>
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_IRDA is not set
> # CONFIG_BT is not set
> # CONFIG_IEEE80211 is not set
>
> #
> # Device Drivers
> #
>
> #
> # Generic Driver Options
> #
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_FW_LOADER=y
>
> #
> # Connector - unified userspace <-> kernelspace linker
> #
> # CONFIG_CONNECTOR is not set
>
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
>
> #
> # Parallel port support
> #
> # CONFIG_PARPORT is not set
>
> #
> # Plug and Play support
> #
> CONFIG_PNP=y
> # CONFIG_PNP_DEBUG is not set
>
> #
> # Protocols
> #
> CONFIG_PNPACPI=y
>
> #
> # Block devices
> #
> # CONFIG_BLK_DEV_FD is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=y
> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_SX8 is not set
> # CONFIG_BLK_DEV_RAM is not set
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_LBD=y
> # CONFIG_CDROM_PKTCDVD is not set
>
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> # CONFIG_ATA_OVER_ETH is not set
>
> #
> # ATA/ATAPI/MFM/RLL support
> #
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=y
>
> #
> # Please see Documentation/ide.txt for help/info on IDE
> drives
> #
> # CONFIG_BLK_DEV_IDE_SATA is not set
> # CONFIG_BLK_DEV_HD_IDE is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> CONFIG_BLK_DEV_IDECD=y
> # CONFIG_BLK_DEV_IDETAPE is not set
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> # CONFIG_BLK_DEV_IDESCSI is not set
> # CONFIG_IDE_TASK_IOCTL is not set
>
> #
> # IDE chipset support/bugfixes
> #
> CONFIG_IDE_GENERIC=y
> CONFIG_BLK_DEV_CMD640=y
> # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
> # CONFIG_BLK_DEV_IDEPNP is not set
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> # CONFIG_BLK_DEV_OFFBOARD is not set
> CONFIG_BLK_DEV_GENERIC=y
> # CONFIG_BLK_DEV_OPTI621 is not set
> CONFIG_BLK_DEV_RZ1000=y
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> # CONFIG_BLK_DEV_AMD74XX is not set
> # CONFIG_BLK_DEV_ATIIXP is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> CONFIG_BLK_DEV_PIIX=y
> # CONFIG_BLK_DEV_IT821X is not set
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIIMAGE is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> # CONFIG_BLK_DEV_VIA82CXXX is not set
> # CONFIG_IDE_ARM is not set
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_IDEDMA_IVB is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_BLK_DEV_HD is not set
>
> #
> # SCSI device support
> #
> CONFIG_RAID_ATTRS=y
> CONFIG_SCSI=y
> CONFIG_SCSI_PROC_FS=y
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> # CONFIG_BLK_DEV_SR is not set
> # CONFIG_CHR_DEV_SG is not set
> # CONFIG_CHR_DEV_SCH is not set
>
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> # CONFIG_SCSI_MULTI_LUN is not set
> # CONFIG_SCSI_CONSTANTS is not set
> # CONFIG_SCSI_LOGGING is not set
>
> #
> # SCSI Transport Attributes
> #
> # CONFIG_SCSI_SPI_ATTRS is not set
> # CONFIG_SCSI_FC_ATTRS is not set
> # CONFIG_SCSI_ISCSI_ATTRS is not set
> # CONFIG_SCSI_SAS_ATTRS is not set
>
> #
> # SCSI low-level drivers
> #
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_3W_9XXX is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AACRAID is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_AIC79XX is not set
> # CONFIG_MEGARAID_NEWGEN is not set
> # CONFIG_MEGARAID_LEGACY is not set
> # CONFIG_MEGARAID_SAS is not set
> CONFIG_SCSI_SATA=y
> # CONFIG_SCSI_SATA_AHCI is not set
> # CONFIG_SCSI_SATA_SVW is not set
> CONFIG_SCSI_ATA_PIIX=y
> # CONFIG_SCSI_SATA_MV is not set
> # CONFIG_SCSI_SATA_NV is not set
> # CONFIG_SCSI_SATA_PROMISE is not set
> # CONFIG_SCSI_SATA_QSTOR is not set
> CONFIG_SCSI_SATA_SX4=y
> # CONFIG_SCSI_SATA_SIL is not set
> CONFIG_SCSI_SATA_SIS=y
> # CONFIG_SCSI_SATA_ULI is not set
> # CONFIG_SCSI_SATA_VIA is not set
> # CONFIG_SCSI_SATA_VITESSE is not set
> CONFIG_SCSI_SATA_INTEL_COMBINED=y
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> CONFIG_SCSI_GDTH=y
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> CONFIG_SCSI_IPR=y
> # CONFIG_SCSI_IPR_TRACE is not set
> # CONFIG_SCSI_IPR_DUMP is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> CONFIG_SCSI_QLA2XXX=y
> # CONFIG_SCSI_QLA21XX is not set
> # CONFIG_SCSI_QLA22XX is not set
> # CONFIG_SCSI_QLA2300 is not set
> # CONFIG_SCSI_QLA2322 is not set
> # CONFIG_SCSI_QLA6312 is not set
> # CONFIG_SCSI_QLA24XX is not set
> # CONFIG_SCSI_LPFC is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_DEBUG is not set
>
> #
> # Multi-device support (RAID and LVM)
> #
> CONFIG_MD=y
> CONFIG_BLK_DEV_MD=y
> CONFIG_MD_LINEAR=y
> CONFIG_MD_RAID0=y
> CONFIG_MD_RAID1=y
> CONFIG_MD_RAID10=y
> CONFIG_MD_RAID5=y
> CONFIG_MD_RAID6=y
> # CONFIG_MD_MULTIPATH is not set
> # CONFIG_MD_FAULTY is not set
> # CONFIG_BLK_DEV_DM is not set
>
> #
> # Fusion MPT device support
> #
> CONFIG_FUSION=y
> CONFIG_FUSION_SPI=y
> # CONFIG_FUSION_FC is not set
> # CONFIG_FUSION_SAS is not set
> CONFIG_FUSION_MAX_SGE=128
> # CONFIG_FUSION_CTL is not set
>
> #
> # IEEE 1394 (FireWire) support
> #
> # CONFIG_IEEE1394 is not set
>
> #
> # I2O device support
> #
> # CONFIG_I2O is not set
>
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
> CONFIG_DUMMY=y
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> # CONFIG_NET_SB1000 is not set
>
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
>
> #
> # PHY device support
> #
> # CONFIG_PHYLIB is not set
>
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=y
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> # CONFIG_CASSINI is not set
> # CONFIG_NET_VENDOR_3COM is not set
>
> #
> # Tulip family network device support
> #
> # CONFIG_NET_TULIP is not set
> # CONFIG_HP100 is not set
> CONFIG_NET_PCI=y
> # CONFIG_PCNET32 is not set
> # CONFIG_AMD8111_ETH is not set
> # CONFIG_ADAPTEC_STARFIRE is not set
> # CONFIG_B44 is not set
> # CONFIG_FORCEDETH is not set
> # CONFIG_DGRS is not set
> # CONFIG_EEPRO100 is not set
> CONFIG_E100=y
> # CONFIG_FEALNX is not set
> # CONFIG_NATSEMI is not set
> # CONFIG_NE2K_PCI is not set
> # CONFIG_8139CP is not set
> # CONFIG_8139TOO is not set
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_VIA_RHINE is not set
>
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> CONFIG_E1000=y
> CONFIG_E1000_NAPI=y
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SIS190 is not set
> # CONFIG_SKGE is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_VIA_VELOCITY is not set
> # CONFIG_TIGON3 is not set
> # CONFIG_BNX2 is not set
>
> #
> # Ethernet (10000 Mbit)
> #
> # CONFIG_CHELSIO_T1 is not set
> # CONFIG_IXGB is not set
> # CONFIG_S2IO is not set
>
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
>
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
>
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
> # CONFIG_NET_FC is not set
> # CONFIG_SHAPER is not set
> # CONFIG_NETCONSOLE is not set
> # CONFIG_NETPOLL is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
>
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN is not set
>
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_TSDEV is not set
> # CONFIG_INPUT_EVDEV is not set
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> # CONFIG_INPUT_MOUSE is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_INPUT_MISC is not set
>
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> # CONFIG_SERIO_SERPORT is not set
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PCIPS2 is not set
> CONFIG_SERIO_LIBPS2=y
> # CONFIG_SERIO_RAW is not set
> # CONFIG_GAMEPORT is not set
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_SERIAL_NONSTANDARD is not set
>
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> # CONFIG_SERIAL_8250_CONSOLE is not set
> # CONFIG_SERIAL_8250_ACPI is not set
> CONFIG_SERIAL_8250_NR_UARTS=4
> # CONFIG_SERIAL_8250_EXTENDED is not set
>
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> # CONFIG_SERIAL_JSM is not set
> CONFIG_UNIX98_PTYS=y
> CONFIG_LEGACY_PTYS=y
> CONFIG_LEGACY_PTY_COUNT=256
>
> #
> # IPMI
> #
> # CONFIG_IPMI_HANDLER is not set
>
> #
> # Watchdog Cards
> #
> CONFIG_WATCHDOG=y
> # CONFIG_WATCHDOG_NOWAYOUT is not set
>
> #
> # Watchdog Device Drivers
> #
> # CONFIG_SOFT_WATCHDOG is not set
> # CONFIG_ACQUIRE_WDT is not set
> # CONFIG_ADVANTECH_WDT is not set
> # CONFIG_ALIM1535_WDT is not set
> # CONFIG_ALIM7101_WDT is not set
> # CONFIG_SC520_WDT is not set
> # CONFIG_EUROTECH_WDT is not set
> # CONFIG_IB700_WDT is not set
> # CONFIG_IBMASR is not set
> # CONFIG_WAFER_WDT is not set
> CONFIG_I6300ESB_WDT=y
> # CONFIG_I8XX_TCO is not set
> # CONFIG_SC1200_WDT is not set
> # CONFIG_60XX_WDT is not set
> # CONFIG_SBC8360_WDT is not set
> # CONFIG_CPU5_WDT is not set
> # CONFIG_W83627HF_WDT is not set
> # CONFIG_W83877F_WDT is not set
> # CONFIG_W83977F_WDT is not set
> # CONFIG_MACHZ_WDT is not set
>
> #
> # PCI-based Watchdog Cards
> #
> # CONFIG_PCIPCWATCHDOG is not set
> # CONFIG_WDTPCI is not set
> # CONFIG_HW_RANDOM is not set
> # CONFIG_NVRAM is not set
> # CONFIG_RTC is not set
> # CONFIG_GEN_RTC is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
>
> #
> # Ftape, the floppy tape device driver
> #
> CONFIG_AGP=y
> CONFIG_AGP_AMD64=y
> # CONFIG_AGP_INTEL is not set
> # CONFIG_DRM is not set
> # CONFIG_MWAVE is not set
> # CONFIG_RAW_DRIVER is not set
> # CONFIG_HPET is not set
> # CONFIG_HANGCHECK_TIMER is not set
>
> #
> # TPM devices
> #
> # CONFIG_TCG_TPM is not set
>
> #
> # I2C support
> #
> CONFIG_I2C=y
> CONFIG_I2C_CHARDEV=y
>
> #
> # I2C Algorithms
> #
> CONFIG_I2C_ALGOBIT=y
> # CONFIG_I2C_ALGOPCF is not set
> # CONFIG_I2C_ALGOPCA is not set
>
> #
> # I2C Hardware Bus support
> #
> # CONFIG_I2C_ALI1535 is not set
> # CONFIG_I2C_ALI1563 is not set
> # CONFIG_I2C_ALI15X3 is not set
> # CONFIG_I2C_AMD756 is not set
> # CONFIG_I2C_AMD8111 is not set
> CONFIG_I2C_I801=y
> CONFIG_I2C_I810=y
> CONFIG_I2C_PIIX4=y
> # CONFIG_I2C_NFORCE2 is not set
> # CONFIG_I2C_PARPORT_LIGHT is not set
> # CONFIG_I2C_PROSAVAGE is not set
> # CONFIG_I2C_SAVAGE4 is not set
> # CONFIG_SCx200_ACB is not set
> # CONFIG_I2C_SIS5595 is not set
> # CONFIG_I2C_SIS630 is not set
> # CONFIG_I2C_SIS96X is not set
> # CONFIG_I2C_VIA is not set
> # CONFIG_I2C_VIAPRO is not set
> # CONFIG_I2C_VOODOO3 is not set
> # CONFIG_I2C_PCA_ISA is not set
>
> #
> # Miscellaneous I2C Chip support
> #
> # CONFIG_SENSORS_DS1337 is not set
> # CONFIG_SENSORS_DS1374 is not set
> # CONFIG_SENSORS_EEPROM is not set
> # CONFIG_SENSORS_PCF8574 is not set
> # CONFIG_SENSORS_PCA9539 is not set
> # CONFIG_SENSORS_PCF8591 is not set
> # CONFIG_SENSORS_RTC8564 is not set
> # CONFIG_SENSORS_MAX6875 is not set
> # CONFIG_I2C_DEBUG_CORE is not set
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> # CONFIG_I2C_DEBUG_CHIP is not set
>
> #
> # Dallas's 1-wire bus
> #
> # CONFIG_W1 is not set
>
> #
> # Hardware Monitoring support
> #
> CONFIG_HWMON=y
> # CONFIG_HWMON_VID is not set
> # CONFIG_SENSORS_ADM1021 is not set
> # CONFIG_SENSORS_ADM1025 is not set
> # CONFIG_SENSORS_ADM1026 is not set
> # CONFIG_SENSORS_ADM1031 is not set
> # CONFIG_SENSORS_ADM9240 is not set
> # CONFIG_SENSORS_ASB100 is not set
> # CONFIG_SENSORS_ATXP1 is not set
> # CONFIG_SENSORS_DS1621 is not set
> # CONFIG_SENSORS_FSCHER is not set
> # CONFIG_SENSORS_FSCPOS is not set
> # CONFIG_SENSORS_GL518SM is not set
> # CONFIG_SENSORS_GL520SM is not set
> # CONFIG_SENSORS_IT87 is not set
> # CONFIG_SENSORS_LM63 is not set
> # CONFIG_SENSORS_LM75 is not set
> # CONFIG_SENSORS_LM77 is not set
> # CONFIG_SENSORS_LM78 is not set
> # CONFIG_SENSORS_LM80 is not set
> # CONFIG_SENSORS_LM83 is not set
> # CONFIG_SENSORS_LM85 is not set
> # CONFIG_SENSORS_LM87 is not set
> # CONFIG_SENSORS_LM90 is not set
> # CONFIG_SENSORS_LM92 is not set
> # CONFIG_SENSORS_MAX1619 is not set
> # CONFIG_SENSORS_PC87360 is not set
> # CONFIG_SENSORS_SIS5595 is not set
> # CONFIG_SENSORS_SMSC47M1 is not set
> # CONFIG_SENSORS_SMSC47B397 is not set
> # CONFIG_SENSORS_VIA686A is not set
> # CONFIG_SENSORS_W83781D is not set
> # CONFIG_SENSORS_W83792D is not set
> # CONFIG_SENSORS_W83L785TS is not set
> # CONFIG_SENSORS_W83627HF is not set
> # CONFIG_SENSORS_W83627EHF is not set
> # CONFIG_SENSORS_HDAPS is not set
> # CONFIG_HWMON_DEBUG_CHIP is not set
>
> #
> # Misc devices
> #
> # CONFIG_IBM_ASM is not set
>
> #
> # Multimedia Capabilities Port drivers
> #
>
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
>
> #
> # Digital Video Broadcasting Devices
> #
> # CONFIG_DVB is not set
>
> #
> # Graphics support
> #
> # CONFIG_FB is not set
> # CONFIG_VIDEO_SELECT is not set
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_DUMMY_CONSOLE=y
>
> #
> # Sound
> #
> # CONFIG_SOUND is not set
>
> #
> # USB support
> #
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB_ARCH_HAS_OHCI=y
> # CONFIG_USB is not set
>
> #
> # USB Gadget Support
> #
> # CONFIG_USB_GADGET is not set
>
> #
> # MMC/SD Card support
> #
> # CONFIG_MMC is not set
>
> #
> # InfiniBand support
> #
> # CONFIG_INFINIBAND is not set
>
> #
> # SN Devices
> #
>
> #
> # Firmware Drivers
> #
> # CONFIG_EDD is not set
> # CONFIG_DELL_RBU is not set
> # CONFIG_DCDBAS is not set
>
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> # CONFIG_EXT2_FS_XATTR is not set
> # CONFIG_EXT2_FS_XIP is not set
> CONFIG_EXT3_FS=y
> CONFIG_EXT3_FS_XATTR=y
> # CONFIG_EXT3_FS_POSIX_ACL is not set
> # CONFIG_EXT3_FS_SECURITY is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> CONFIG_FS_POSIX_ACL=y
> # CONFIG_XFS_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_INOTIFY=y
> # CONFIG_QUOTA is not set
> CONFIG_DNOTIFY=y
> # CONFIG_AUTOFS_FS is not set
> CONFIG_AUTOFS4_FS=y
> # CONFIG_FUSE_FS is not set
>
> #
> # CD-ROM/DVD Filesystems
> #
> # CONFIG_ISO9660_FS is not set
> # CONFIG_UDF_FS is not set
>
> #
> # DOS/FAT/NT Filesystems
> #
> # CONFIG_MSDOS_FS is not set
> # CONFIG_VFAT_FS is not set
> # CONFIG_NTFS_FS is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> # CONFIG_HUGETLBFS is not set
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_RAMFS=y
> # CONFIG_RELAYFS_FS is not set
>
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_SQUASHFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
>
> #
> # Network File Systems
> #
> CONFIG_NFS_FS=y
> CONFIG_NFS_V3=y
> # CONFIG_NFS_V3_ACL is not set
> CONFIG_NFS_V4=y
> # CONFIG_NFS_DIRECTIO is not set
> CONFIG_NFSD=y
> CONFIG_NFSD_V3=y
> # CONFIG_NFSD_V3_ACL is not set
> CONFIG_NFSD_V4=y
> CONFIG_NFSD_TCP=y
> CONFIG_LOCKD=y
> CONFIG_LOCKD_V4=y
> CONFIG_EXPORTFS=y
> CONFIG_NFS_COMMON=y
> CONFIG_SUNRPC=y
> CONFIG_SUNRPC_GSS=y
> CONFIG_RPCSEC_GSS_KRB5=y
> # CONFIG_RPCSEC_GSS_SPKM3 is not set
> # CONFIG_SMB_FS is not set
> # CONFIG_CIFS is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_AFS_FS is not set
> # CONFIG_9P_FS is not set
>
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
>
> #
> # Native Language Support
> #
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="utf8"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> CONFIG_NLS_CODEPAGE_850=y
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> CONFIG_NLS_ASCII=y
> CONFIG_NLS_ISO8859_1=y
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> CONFIG_NLS_ISO8859_15=y
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> CONFIG_NLS_UTF8=y
>
> #
> # Profiling support
> #
> # CONFIG_PROFILING is not set
>
> #
> # Kernel hacking
> #
> # CONFIG_PRINTK_TIME is not set
> # CONFIG_DEBUG_KERNEL is not set
> CONFIG_LOG_BUF_SHIFT=15
>
> #
> # Security options
> #
>
> #
> # PaX
> #
> CONFIG_PAX=y
>
> #
> # PaX Control
> #
> # CONFIG_PAX_SOFTMODE is not set
> CONFIG_PAX_EI_PAX=y
> CONFIG_PAX_PT_PAX_FLAGS=y
> # CONFIG_PAX_NO_ACL_FLAGS is not set
> CONFIG_PAX_HAVE_ACL_FLAGS=y
> # CONFIG_PAX_HOOK_ACL_FLAGS is not set
>
> #
> # Non-executable pages
> #
> CONFIG_PAX_NOEXEC=y
> # CONFIG_PAX_PAGEEXEC is not set
>
> #
> # Address Space Layout Randomization
> #
> CONFIG_PAX_ASLR=y
> CONFIG_PAX_RANDUSTACK=y
> CONFIG_PAX_RANDMMAP=y
>
> #
> # Grsecurity
> #
> CONFIG_GRKERNSEC=y
> # CONFIG_GRKERNSEC_LOW is not set
> # CONFIG_GRKERNSEC_MEDIUM is not set
> # CONFIG_GRKERNSEC_HIGH is not set
> CONFIG_GRKERNSEC_CUSTOM=y
>
> #
> # Address Space Protection
> #
> # CONFIG_GRKERNSEC_KMEM is not set
> # CONFIG_GRKERNSEC_IO is not set
> # CONFIG_GRKERNSEC_PROC_MEMMAP is not set
> # CONFIG_GRKERNSEC_BRUTE is not set
> CONFIG_GRKERNSEC_HIDESYM=y
>
> #
> # Role Based Access Control Options
> #
> CONFIG_GRKERNSEC_ACL_HIDEKERN=y
> CONFIG_GRKERNSEC_ACL_MAXTRIES=3
> CONFIG_GRKERNSEC_ACL_TIMEOUT=30
>
> #
> # Filesystem Protections
> #
> CONFIG_GRKERNSEC_PROC=y
> # CONFIG_GRKERNSEC_PROC_USER is not set
> CONFIG_GRKERNSEC_PROC_USERGROUP=y
> CONFIG_GRKERNSEC_PROC_GID=10
> CONFIG_GRKERNSEC_PROC_ADD=y
> CONFIG_GRKERNSEC_LINK=y
> CONFIG_GRKERNSEC_FIFO=y
> CONFIG_GRKERNSEC_CHROOT=y
> CONFIG_GRKERNSEC_CHROOT_MOUNT=y
> CONFIG_GRKERNSEC_CHROOT_DOUBLE=y
> CONFIG_GRKERNSEC_CHROOT_PIVOT=y
> CONFIG_GRKERNSEC_CHROOT_CHDIR=y
> CONFIG_GRKERNSEC_CHROOT_CHMOD=y
> CONFIG_GRKERNSEC_CHROOT_FCHDIR=y
> CONFIG_GRKERNSEC_CHROOT_MKNOD=y
> CONFIG_GRKERNSEC_CHROOT_SHMAT=y
> CONFIG_GRKERNSEC_CHROOT_UNIX=y
> CONFIG_GRKERNSEC_CHROOT_FINDTASK=y
> CONFIG_GRKERNSEC_CHROOT_NICE=y
> CONFIG_GRKERNSEC_CHROOT_SYSCTL=y
> CONFIG_GRKERNSEC_CHROOT_CAPS=y
>
> #
> # Kernel Auditing
> #
> # CONFIG_GRKERNSEC_AUDIT_GROUP is not set
> CONFIG_GRKERNSEC_EXECLOG=y
> CONFIG_GRKERNSEC_RESLOG=y
> CONFIG_GRKERNSEC_CHROOT_EXECLOG=y
> CONFIG_GRKERNSEC_AUDIT_CHDIR=y
> CONFIG_GRKERNSEC_AUDIT_MOUNT=y
> CONFIG_GRKERNSEC_AUDIT_IPC=y
> CONFIG_GRKERNSEC_SIGNAL=y
> CONFIG_GRKERNSEC_FORKFAIL=y
> CONFIG_GRKERNSEC_TIME=y
> CONFIG_GRKERNSEC_PROC_IPADDR=y
>
> #
> # Executable Protections
> #
> CONFIG_GRKERNSEC_EXECVE=y
> # CONFIG_GRKERNSEC_SHM is not set
> CONFIG_GRKERNSEC_DMESG=y
> CONFIG_GRKERNSEC_RANDPID=y
> CONFIG_GRKERNSEC_TPE=y
> CONFIG_GRKERNSEC_TPE_ALL=y
> # CONFIG_GRKERNSEC_TPE_INVERT is not set
> CONFIG_GRKERNSEC_TPE_GID=100
>
> #
> # Network Protections
> #
> CONFIG_GRKERNSEC_RANDNET=y
> CONFIG_GRKERNSEC_RANDSRC=y
> # CONFIG_GRKERNSEC_SOCKET is not set
>
> #
> # Sysctl support
> #
> CONFIG_GRKERNSEC_SYSCTL=y
> # CONFIG_GRKERNSEC_SYSCTL_ON is not set
>
> #
> # Logging Options
> #
> CONFIG_GRKERNSEC_FLOODTIME=10
> CONFIG_GRKERNSEC_FLOODBURST=4
> # CONFIG_KEYS is not set
> # CONFIG_SECURITY is not set
>
> #
> # Cryptographic options
> #
> CONFIG_CRYPTO=y
> # CONFIG_CRYPTO_HMAC is not set
> # CONFIG_CRYPTO_NULL is not set
> # CONFIG_CRYPTO_MD4 is not set
> CONFIG_CRYPTO_MD5=y
> # CONFIG_CRYPTO_SHA1 is not set
> CONFIG_CRYPTO_SHA256=y
> # CONFIG_CRYPTO_SHA512 is not set
> # CONFIG_CRYPTO_WP512 is not set
> # CONFIG_CRYPTO_TGR192 is not set
> CONFIG_CRYPTO_DES=y
> # CONFIG_CRYPTO_BLOWFISH is not set
> # CONFIG_CRYPTO_TWOFISH is not set
> # CONFIG_CRYPTO_SERPENT is not set
> # CONFIG_CRYPTO_AES_X86_64 is not set
> # CONFIG_CRYPTO_CAST5 is not set
> # CONFIG_CRYPTO_CAST6 is not set
> # CONFIG_CRYPTO_TEA is not set
> # CONFIG_CRYPTO_ARC4 is not set
> # CONFIG_CRYPTO_KHAZAD is not set
> # CONFIG_CRYPTO_ANUBIS is not set
> # CONFIG_CRYPTO_DEFLATE is not set
> # CONFIG_CRYPTO_MICHAEL_MIC is not set
> # CONFIG_CRYPTO_CRC32C is not set
> # CONFIG_CRYPTO_TEST is not set
>
> #
> # Hardware crypto devices
> #
>
> #
> # Library routines
> #
> # CONFIG_CRC_CCITT is not set
> # CONFIG_CRC16 is not set
> CONFIG_CRC32=y
> CONFIG_LIBCRC32C=y
>
> --
> gentoo-user@gentoo.org mailing list
>
>
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user] Only one processor ?
2006-03-28 14:57 ` Keats
@ 2006-03-28 16:30 ` Fernando Antunes
0 siblings, 0 replies; 14+ messages in thread
From: Fernando Antunes @ 2006-03-28 16:30 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 49299 bytes --]
I checked my .config and didn't find nothing diferent from yours about de
HT.
Did you check your initizalization log about cpu events :
dmesg | grep -i cpu
to find any extra information ?
On 3/28/06, Keats <neokeats@wanadoo.fr> wrote:
>
> on the dual xeon :
> dbthemof ~ # cat /proc/interrupts
> CPU0 CPU1
> 0: 21779945 0 IO-APIC-edge timer
> 9: 0 0 IO-APIC-level acpi
> 17: 706168 0 IO-APIC-level eth0
> 18: 682541 0 IO-APIC-level eth1
> 20: 38497 0 IO-APIC-level ioc0
> NMI: 326 306
> LOC: 21780616 21780594
> ERR: 1
>
> on the unique xeon :
> themof ~ # cat /proc/interrupts
> CPU0 CPU1
> 0: 64 63663212 IO-APIC-edge timer
> 9: 0 0 IO-APIC-level acpi
> 17: 0 1941736 IO-APIC-level eth0
> 18: 0 3412335 IO-APIC-level eth1
> 20: 0 289043 IO-APIC-level ioc0
> NMI: 12808 12788
> LOC: 63665314 63665291
> ERR: 1
> MIS: 0
>
> Le mardi 28 mars 2006 à 11:41 -0300, Fernando Antunes a écrit :
> > Please, do a cat /proc/interrupts.
> >
> > How many CPU columns do you see ?
> >
> > On 3/28/06, Keats <neokeats@wanadoo.fr> wrote:
> > Hi,
> > on a recent gentoo installation,
> > i ve noticed that i have only one of my processor detected...
> > i have dual xeon ht so i should have 4 processors detected but
> > i only
> > have two, like on my xeon ht...
> > physical id : 0 for the two processors detected means that
> > only one
> > physicval processor is detected...
> >
> > themof ~ # cat /proc/cpuinfo
> > processor : 0
> > vendor_id : GenuineIntel
> > cpu family : 15
> > model : 4
> > model name : Intel(R) Xeon(TM) CPU
> > 3.20GHz
> > stepping : 1
> > cpu MHz : 3200.244
> > cache size : 1024 KB
> > physical id : 0
> > siblings : 2
> > core id : 0
> > cpu cores : 1
> > fpu : yes
> > fpu_exception : yes
> > cpuid level : 5
> > wp : yes
> > flags : fpu vme de pse tsc msr pae mce cx8 apic sep
> > mtrr pge mca cmov
> > pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall
> > lm
> > constant_tsc pni monitor ds_cpl cid cx16 xtpr
> > bogomips : 6409.60
> > clflush size : 64
> > cache_alignment : 128
> > address sizes : 36 bits physical, 48 bits virtual
> > power management:
> >
> > processor : 1
> > vendor_id : GenuineIntel
> > cpu family : 15
> > model : 4
> > model name : Intel(R) Xeon(TM) CPU
> > 3.20GHz
> > stepping : 1
> > cpu MHz : 3200.244
> > cache size : 1024 KB
> > physical id : 0
> > siblings : 2
> > core id : 0
> > cpu cores : 1
> > fpu : yes
> > fpu_exception : yes
> > cpuid level : 5
> > wp : yes
> > flags : fpu vme de pse tsc msr pae mce cx8 apic sep
> > mtrr pge mca cmov
> > pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall
> > lm
> > constant_tsc pni monitor ds_cpl cid cx16 xtpr
> > bogomips : 6400.78
> > clflush size : 64
> > cache_alignment : 128
> > address sizes : 36 bits physical, 48 bits virtual
> > power management:
> >
> > here is my headless config file, i removed a lot of things
> > cause it's
> > only a server... so i don't need usb and things like that...
> > any help is welcome :)
> > thanx
> >
> > #
> > # Automatically generated make config: don't edit
> > # Linux kernel version: 2.6.14-hardened-r6
> > # Mon Mar 27 16:16:52 2006
> > #
> > CONFIG_X86_64=y
> > CONFIG_64BIT=y
> > CONFIG_X86=y
> > CONFIG_SEMAPHORE_SLEEPERS=y
> > CONFIG_MMU=y
> > CONFIG_RWSEM_GENERIC_SPINLOCK=y
> > CONFIG_GENERIC_CALIBRATE_DELAY=y
> > CONFIG_X86_CMPXCHG=y
> > CONFIG_EARLY_PRINTK=y
> > CONFIG_GENERIC_ISA_DMA=y
> > CONFIG_GENERIC_IOMAP=y
> > CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> >
> > #
> > # Code maturity level options
> > #
> > CONFIG_EXPERIMENTAL=y
> > CONFIG_CLEAN_COMPILE=y
> > CONFIG_LOCK_KERNEL=y
> > CONFIG_INIT_ENV_ARG_LIMIT=32
> >
> > #
> > # General setup
> > #
> > CONFIG_LOCALVERSION=""
> > CONFIG_LOCALVERSION_AUTO=y
> > CONFIG_SWAP=y
> > CONFIG_SYSVIPC=y
> > CONFIG_POSIX_MQUEUE=y
> > # CONFIG_BSD_PROCESS_ACCT is not set
> > CONFIG_SYSCTL=y
> > CONFIG_AUDIT=y
> > CONFIG_AUDITSYSCALL=y
> > CONFIG_HOTPLUG=y
> > CONFIG_KOBJECT_UEVENT=y
> > CONFIG_IKCONFIG=y
> > CONFIG_IKCONFIG_PROC=y
> > # CONFIG_CPUSETS is not set
> > CONFIG_INITRAMFS_SOURCE=""
> > # CONFIG_EMBEDDED is not set
> > CONFIG_PRINTK=y
> > CONFIG_BUG=y
> > CONFIG_BASE_FULL=y
> > CONFIG_FUTEX=y
> > CONFIG_EPOLL=y
> > CONFIG_SHMEM=y
> > CONFIG_CC_ALIGN_FUNCTIONS=0
> > CONFIG_CC_ALIGN_LABELS=0
> > CONFIG_CC_ALIGN_LOOPS=0
> > CONFIG_CC_ALIGN_JUMPS=0
> > # CONFIG_TINY_SHMEM is not set
> > CONFIG_BASE_SMALL=0
> >
> > #
> > # Loadable module support
> > #
> > # CONFIG_MODULES is not set
> > CONFIG_STOP_MACHINE=y
> >
> > #
> > # Processor type and features
> > #
> > # CONFIG_MK8 is not set
> > CONFIG_MPSC=y
> > # CONFIG_GENERIC_CPU is not set
> > CONFIG_X86_L1_CACHE_BYTES=128
> > CONFIG_X86_L1_CACHE_SHIFT=7
> > CONFIG_X86_TSC=y
> > CONFIG_X86_GOOD_APIC=y
> > CONFIG_MICROCODE=y
> > CONFIG_X86_MSR=y
> > CONFIG_X86_CPUID=y
> > CONFIG_X86_HT=y
> > CONFIG_X86_IO_APIC=y
> > CONFIG_X86_LOCAL_APIC=y
> > CONFIG_MTRR=y
> > CONFIG_SMP=y
> > CONFIG_SCHED_SMT=y
> > # CONFIG_PREEMPT_NONE is not set
> > # CONFIG_PREEMPT_VOLUNTARY is not set
> > CONFIG_PREEMPT=y
> > CONFIG_PREEMPT_BKL=y
> > # CONFIG_K8_NUMA is not set
> > # CONFIG_NUMA_EMU is not set
> > # CONFIG_NUMA is not set
> > CONFIG_ARCH_FLATMEM_ENABLE=y
> > CONFIG_SELECT_MEMORY_MODEL=y
> > CONFIG_FLATMEM_MANUAL=y
> > # CONFIG_DISCONTIGMEM_MANUAL is not set
> > # CONFIG_SPARSEMEM_MANUAL is not set
> > CONFIG_FLATMEM=y
> > CONFIG_FLAT_NODE_MEM_MAP=y
> > # CONFIG_SPARSEMEM_STATIC is not set
> > CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
> > CONFIG_NR_CPUS=8
> > CONFIG_HOTPLUG_CPU=y
> > CONFIG_HPET_TIMER=y
> > # CONFIG_X86_PM_TIMER is not set
> > CONFIG_GART_IOMMU=y
> > CONFIG_SWIOTLB=y
> > CONFIG_X86_MCE=y
> > CONFIG_X86_MCE_INTEL=y
> > CONFIG_PHYSICAL_START=0x100000
> > # CONFIG_KEXEC is not set
> > CONFIG_SECCOMP=y
> > # CONFIG_HZ_100 is not set
> > CONFIG_HZ_250=y
> > # CONFIG_HZ_1000 is not set
> > CONFIG_HZ=250
> > CONFIG_GENERIC_HARDIRQS=y
> > CONFIG_GENERIC_IRQ_PROBE=y
> > CONFIG_ISA_DMA_API=y
> > CONFIG_GENERIC_PENDING_IRQ=y
> >
> > #
> > # Power management options
> > #
> > CONFIG_PM=y
> > # CONFIG_PM_DEBUG is not set
> > # CONFIG_SOFTWARE_SUSPEND is not set
> > CONFIG_SUSPEND_SMP=y
> >
> > #
> > # ACPI (Advanced Configuration and Power Interface) Support
> > #
> > CONFIG_ACPI=y
> > CONFIG_ACPI_SLEEP=y
> > CONFIG_ACPI_SLEEP_PROC_FS=y
> > # CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
> > CONFIG_ACPI_AC=y
> > CONFIG_ACPI_BATTERY=y
> > CONFIG_ACPI_BUTTON=y
> > CONFIG_ACPI_VIDEO=y
> > # CONFIG_ACPI_HOTKEY is not set
> > CONFIG_ACPI_FAN=y
> > CONFIG_ACPI_PROCESSOR=y
> > CONFIG_ACPI_HOTPLUG_CPU=y
> > CONFIG_ACPI_THERMAL=y
> > # CONFIG_ACPI_ASUS is not set
> > # CONFIG_ACPI_IBM is not set
> > # CONFIG_ACPI_TOSHIBA is not set
> > CONFIG_ACPI_BLACKLIST_YEAR=0
> > # CONFIG_ACPI_DEBUG is not set
> > CONFIG_ACPI_EC=y
> > CONFIG_ACPI_POWER=y
> > CONFIG_ACPI_SYSTEM=y
> > CONFIG_ACPI_CONTAINER=y
> >
> > #
> > # CPU Frequency scaling
> > #
> > # CONFIG_CPU_FREQ is not set
> >
> > #
> > # Bus options (PCI etc.)
> > #
> > CONFIG_PCI=y
> > CONFIG_PCI_DIRECT=y
> > CONFIG_PCI_MMCONFIG=y
> > # CONFIG_UNORDERED_IO is not set
> > CONFIG_PCIEPORTBUS=y
> > # CONFIG_PCI_MSI is not set
> > CONFIG_PCI_LEGACY_PROC=y
> >
> > #
> > # PCCARD (PCMCIA/CardBus) support
> > #
> > # CONFIG_PCCARD is not set
> >
> > #
> > # PCI Hotplug Support
> > #
> > # CONFIG_HOTPLUG_PCI is not set
> >
> > #
> > # Executable file formats / Emulations
> > #
> > CONFIG_BINFMT_ELF=y
> > CONFIG_BINFMT_MISC=y
> > # CONFIG_IA32_EMULATION is not set
> >
> > #
> > # Networking
> > #
> > CONFIG_NET=y
> >
> > #
> > # Networking options
> > #
> > CONFIG_PACKET=y
> > # CONFIG_PACKET_MMAP is not set
> > CONFIG_UNIX=y
> > CONFIG_XFRM=y
> > # CONFIG_XFRM_USER is not set
> > # CONFIG_NET_KEY is not set
> > CONFIG_INET=y
> > CONFIG_IP_MULTICAST=y
> > # CONFIG_IP_ADVANCED_ROUTER is not set
> > CONFIG_IP_FIB_HASH=y
> > # CONFIG_IP_PNP is not set
> > CONFIG_NET_IPIP=y
> > # CONFIG_NET_IPGRE is not set
> > # CONFIG_IP_MROUTE is not set
> > # CONFIG_ARPD is not set
> > # CONFIG_SYN_COOKIES is not set
> > # CONFIG_INET_AH is not set
> > # CONFIG_INET_ESP is not set
> > # CONFIG_INET_IPCOMP is not set
> > CONFIG_INET_TUNNEL=y
> > CONFIG_INET_DIAG=y
> > CONFIG_INET_TCP_DIAG=y
> > # CONFIG_TCP_CONG_ADVANCED is not set
> > CONFIG_TCP_CONG_BIC=y
> >
> > #
> > # IP: Virtual Server Configuration
> > #
> > # CONFIG_IP_VS is not set
> > CONFIG_IPV6=y
> > # CONFIG_IPV6_PRIVACY is not set
> > # CONFIG_INET6_AH is not set
> > # CONFIG_INET6_ESP is not set
> > # CONFIG_INET6_IPCOMP is not set
> > CONFIG_INET6_TUNNEL=y
> > # CONFIG_IPV6_TUNNEL is not set
> > CONFIG_NETFILTER=y
> > # CONFIG_NETFILTER_DEBUG is not set
> > # CONFIG_NETFILTER_NETLINK is not set
> >
> > #
> > # IP: Netfilter Configuration
> > #
> > CONFIG_IP_NF_CONNTRACK=y
> > # CONFIG_IP_NF_CT_ACCT is not set
> > # CONFIG_IP_NF_CONNTRACK_MARK is not set
> > # CONFIG_IP_NF_CONNTRACK_EVENTS is not set
> > # CONFIG_IP_NF_CT_PROTO_SCTP is not set
> > # CONFIG_IP_NF_FTP is not set
> > # CONFIG_IP_NF_IRC is not set
> > # CONFIG_IP_NF_NETBIOS_NS is not set
> > # CONFIG_IP_NF_TFTP is not set
> > # CONFIG_IP_NF_AMANDA is not set
> > # CONFIG_IP_NF_PPTP is not set
> > CONFIG_IP_NF_QUEUE=y
> > CONFIG_IP_NF_IPTABLES=y
> > CONFIG_IP_NF_MATCH_LIMIT=y
> > CONFIG_IP_NF_MATCH_IPRANGE=y
> > CONFIG_IP_NF_MATCH_MAC=y
> > CONFIG_IP_NF_MATCH_PKTTYPE=y
> > CONFIG_IP_NF_MATCH_MARK=y
> > CONFIG_IP_NF_MATCH_MULTIPORT=y
> > CONFIG_IP_NF_MATCH_TOS=y
> > CONFIG_IP_NF_MATCH_RECENT=y
> > CONFIG_IP_NF_MATCH_ECN=y
> > CONFIG_IP_NF_MATCH_DSCP=y
> > CONFIG_IP_NF_MATCH_AH_ESP=y
> > CONFIG_IP_NF_MATCH_LENGTH=y
> > CONFIG_IP_NF_MATCH_TTL=y
> > CONFIG_IP_NF_MATCH_TCPMSS=y
> > # CONFIG_IP_NF_MATCH_STEALTH is not set
> > CONFIG_IP_NF_MATCH_HELPER=y
> > CONFIG_IP_NF_MATCH_STATE=y
> > CONFIG_IP_NF_MATCH_CONNTRACK=y
> > CONFIG_IP_NF_MATCH_OWNER=y
> > # CONFIG_IP_NF_MATCH_ADDRTYPE is not set
> > # CONFIG_IP_NF_MATCH_REALM is not set
> > # CONFIG_IP_NF_MATCH_SCTP is not set
> > # CONFIG_IP_NF_MATCH_DCCP is not set
> > # CONFIG_IP_NF_MATCH_COMMENT is not set
> > # CONFIG_IP_NF_MATCH_HASHLIMIT is not set
> > # CONFIG_IP_NF_MATCH_STRING is not set
> > CONFIG_IP_NF_FILTER=y
> > CONFIG_IP_NF_TARGET_REJECT=y
> > CONFIG_IP_NF_TARGET_LOG=y
> > CONFIG_IP_NF_TARGET_ULOG=y
> > CONFIG_IP_NF_TARGET_TCPMSS=y
> > # CONFIG_IP_NF_TARGET_NFQUEUE is not set
> > CONFIG_IP_NF_NAT=y
> > CONFIG_IP_NF_NAT_NEEDED=y
> > CONFIG_IP_NF_TARGET_MASQUERADE=y
> > CONFIG_IP_NF_TARGET_REDIRECT=y
> > CONFIG_IP_NF_TARGET_NETMAP=y
> > CONFIG_IP_NF_TARGET_SAME=y
> > # CONFIG_IP_NF_NAT_SNMP_BASIC is not set
> > CONFIG_IP_NF_MANGLE=y
> > CONFIG_IP_NF_TARGET_TOS=y
> > CONFIG_IP_NF_TARGET_ECN=y
> > CONFIG_IP_NF_TARGET_DSCP=y
> > CONFIG_IP_NF_TARGET_MARK=y
> > CONFIG_IP_NF_TARGET_CLASSIFY=y
> > # CONFIG_IP_NF_TARGET_TTL is not set
> > CONFIG_IP_NF_RAW=y
> > CONFIG_IP_NF_TARGET_NOTRACK=y
> > CONFIG_IP_NF_ARPTABLES=y
> > CONFIG_IP_NF_ARPFILTER=y
> > CONFIG_IP_NF_ARP_MANGLE=y
> >
> > #
> > # IPv6: Netfilter Configuration (EXPERIMENTAL)
> > #
> > # CONFIG_IP6_NF_QUEUE is not set
> > # CONFIG_IP6_NF_IPTABLES is not set
> >
> > #
> > # DCCP Configuration (EXPERIMENTAL)
> > #
> > # CONFIG_IP_DCCP is not set
> >
> > #
> > # SCTP Configuration (EXPERIMENTAL)
> > #
> > # CONFIG_IP_SCTP is not set
> > # CONFIG_ATM is not set
> > # CONFIG_BRIDGE is not set
> > # CONFIG_VLAN_8021Q is not set
> > # CONFIG_DECNET is not set
> > # CONFIG_LLC2 is not set
> > # CONFIG_IPX is not set
> > # CONFIG_ATALK is not set
> > # CONFIG_X25 is not set
> > # CONFIG_LAPB is not set
> > # CONFIG_NET_DIVERT is not set
> > # CONFIG_ECONET is not set
> > # CONFIG_WAN_ROUTER is not set
> > # CONFIG_NET_SCHED is not set
> > # CONFIG_NET_CLS_ROUTE is not set
> >
> > #
> > # Network testing
> > #
> > # CONFIG_NET_PKTGEN is not set
> > # CONFIG_HAMRADIO is not set
> > # CONFIG_IRDA is not set
> > # CONFIG_BT is not set
> > # CONFIG_IEEE80211 is not set
> >
> > #
> > # Device Drivers
> > #
> >
> > #
> > # Generic Driver Options
> > #
> > CONFIG_STANDALONE=y
> > CONFIG_PREVENT_FIRMWARE_BUILD=y
> > CONFIG_FW_LOADER=y
> >
> > #
> > # Connector - unified userspace <-> kernelspace linker
> > #
> > # CONFIG_CONNECTOR is not set
> >
> > #
> > # Memory Technology Devices (MTD)
> > #
> > # CONFIG_MTD is not set
> >
> > #
> > # Parallel port support
> > #
> > # CONFIG_PARPORT is not set
> >
> > #
> > # Plug and Play support
> > #
> > CONFIG_PNP=y
> > # CONFIG_PNP_DEBUG is not set
> >
> > #
> > # Protocols
> > #
> > CONFIG_PNPACPI=y
> >
> > #
> > # Block devices
> > #
> > # CONFIG_BLK_DEV_FD is not set
> > # CONFIG_BLK_CPQ_DA is not set
> > # CONFIG_BLK_CPQ_CISS_DA is not set
> > # CONFIG_BLK_DEV_DAC960 is not set
> > # CONFIG_BLK_DEV_UMEM is not set
> > # CONFIG_BLK_DEV_COW_COMMON is not set
> > CONFIG_BLK_DEV_LOOP=y
> > # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> > # CONFIG_BLK_DEV_NBD is not set
> > # CONFIG_BLK_DEV_SX8 is not set
> > # CONFIG_BLK_DEV_RAM is not set
> > CONFIG_BLK_DEV_RAM_COUNT=16
> > CONFIG_LBD=y
> > # CONFIG_CDROM_PKTCDVD is not set
> >
> > #
> > # IO Schedulers
> > #
> > CONFIG_IOSCHED_NOOP=y
> > CONFIG_IOSCHED_AS=y
> > CONFIG_IOSCHED_DEADLINE=y
> > CONFIG_IOSCHED_CFQ=y
> > # CONFIG_ATA_OVER_ETH is not set
> >
> > #
> > # ATA/ATAPI/MFM/RLL support
> > #
> > CONFIG_IDE=y
> > CONFIG_BLK_DEV_IDE=y
> >
> > #
> > # Please see Documentation/ide.txt for help/info on IDE
> > drives
> > #
> > # CONFIG_BLK_DEV_IDE_SATA is not set
> > # CONFIG_BLK_DEV_HD_IDE is not set
> > CONFIG_BLK_DEV_IDEDISK=y
> > CONFIG_IDEDISK_MULTI_MODE=y
> > CONFIG_BLK_DEV_IDECD=y
> > # CONFIG_BLK_DEV_IDETAPE is not set
> > # CONFIG_BLK_DEV_IDEFLOPPY is not set
> > # CONFIG_BLK_DEV_IDESCSI is not set
> > # CONFIG_IDE_TASK_IOCTL is not set
> >
> > #
> > # IDE chipset support/bugfixes
> > #
> > CONFIG_IDE_GENERIC=y
> > CONFIG_BLK_DEV_CMD640=y
> > # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
> > # CONFIG_BLK_DEV_IDEPNP is not set
> > CONFIG_BLK_DEV_IDEPCI=y
> > CONFIG_IDEPCI_SHARE_IRQ=y
> > # CONFIG_BLK_DEV_OFFBOARD is not set
> > CONFIG_BLK_DEV_GENERIC=y
> > # CONFIG_BLK_DEV_OPTI621 is not set
> > CONFIG_BLK_DEV_RZ1000=y
> > CONFIG_BLK_DEV_IDEDMA_PCI=y
> > # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> > CONFIG_IDEDMA_PCI_AUTO=y
> > # CONFIG_IDEDMA_ONLYDISK is not set
> > # CONFIG_BLK_DEV_AEC62XX is not set
> > # CONFIG_BLK_DEV_ALI15X3 is not set
> > # CONFIG_BLK_DEV_AMD74XX is not set
> > # CONFIG_BLK_DEV_ATIIXP is not set
> > # CONFIG_BLK_DEV_CMD64X is not set
> > # CONFIG_BLK_DEV_TRIFLEX is not set
> > # CONFIG_BLK_DEV_CY82C693 is not set
> > # CONFIG_BLK_DEV_CS5520 is not set
> > # CONFIG_BLK_DEV_CS5530 is not set
> > # CONFIG_BLK_DEV_HPT34X is not set
> > # CONFIG_BLK_DEV_HPT366 is not set
> > # CONFIG_BLK_DEV_SC1200 is not set
> > CONFIG_BLK_DEV_PIIX=y
> > # CONFIG_BLK_DEV_IT821X is not set
> > # CONFIG_BLK_DEV_NS87415 is not set
> > # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> > # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> > # CONFIG_BLK_DEV_SVWKS is not set
> > # CONFIG_BLK_DEV_SIIMAGE is not set
> > # CONFIG_BLK_DEV_SIS5513 is not set
> > # CONFIG_BLK_DEV_SLC90E66 is not set
> > # CONFIG_BLK_DEV_TRM290 is not set
> > # CONFIG_BLK_DEV_VIA82CXXX is not set
> > # CONFIG_IDE_ARM is not set
> > CONFIG_BLK_DEV_IDEDMA=y
> > # CONFIG_IDEDMA_IVB is not set
> > CONFIG_IDEDMA_AUTO=y
> > # CONFIG_BLK_DEV_HD is not set
> >
> > #
> > # SCSI device support
> > #
> > CONFIG_RAID_ATTRS=y
> > CONFIG_SCSI=y
> > CONFIG_SCSI_PROC_FS=y
> >
> > #
> > # SCSI support type (disk, tape, CD-ROM)
> > #
> > CONFIG_BLK_DEV_SD=y
> > # CONFIG_CHR_DEV_ST is not set
> > # CONFIG_CHR_DEV_OSST is not set
> > # CONFIG_BLK_DEV_SR is not set
> > # CONFIG_CHR_DEV_SG is not set
> > # CONFIG_CHR_DEV_SCH is not set
> >
> > #
> > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> > #
> > # CONFIG_SCSI_MULTI_LUN is not set
> > # CONFIG_SCSI_CONSTANTS is not set
> > # CONFIG_SCSI_LOGGING is not set
> >
> > #
> > # SCSI Transport Attributes
> > #
> > # CONFIG_SCSI_SPI_ATTRS is not set
> > # CONFIG_SCSI_FC_ATTRS is not set
> > # CONFIG_SCSI_ISCSI_ATTRS is not set
> > # CONFIG_SCSI_SAS_ATTRS is not set
> >
> > #
> > # SCSI low-level drivers
> > #
> > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> > # CONFIG_SCSI_3W_9XXX is not set
> > # CONFIG_SCSI_ACARD is not set
> > # CONFIG_SCSI_AACRAID is not set
> > # CONFIG_SCSI_AIC7XXX is not set
> > # CONFIG_SCSI_AIC7XXX_OLD is not set
> > # CONFIG_SCSI_AIC79XX is not set
> > # CONFIG_MEGARAID_NEWGEN is not set
> > # CONFIG_MEGARAID_LEGACY is not set
> > # CONFIG_MEGARAID_SAS is not set
> > CONFIG_SCSI_SATA=y
> > # CONFIG_SCSI_SATA_AHCI is not set
> > # CONFIG_SCSI_SATA_SVW is not set
> > CONFIG_SCSI_ATA_PIIX=y
> > # CONFIG_SCSI_SATA_MV is not set
> > # CONFIG_SCSI_SATA_NV is not set
> > # CONFIG_SCSI_SATA_PROMISE is not set
> > # CONFIG_SCSI_SATA_QSTOR is not set
> > CONFIG_SCSI_SATA_SX4=y
> > # CONFIG_SCSI_SATA_SIL is not set
> > CONFIG_SCSI_SATA_SIS=y
> > # CONFIG_SCSI_SATA_ULI is not set
> > # CONFIG_SCSI_SATA_VIA is not set
> > # CONFIG_SCSI_SATA_VITESSE is not set
> > CONFIG_SCSI_SATA_INTEL_COMBINED=y
> > # CONFIG_SCSI_BUSLOGIC is not set
> > # CONFIG_SCSI_DMX3191D is not set
> > # CONFIG_SCSI_EATA is not set
> > # CONFIG_SCSI_FUTURE_DOMAIN is not set
> > CONFIG_SCSI_GDTH=y
> > # CONFIG_SCSI_IPS is not set
> > # CONFIG_SCSI_INITIO is not set
> > # CONFIG_SCSI_INIA100 is not set
> > # CONFIG_SCSI_SYM53C8XX_2 is not set
> > CONFIG_SCSI_IPR=y
> > # CONFIG_SCSI_IPR_TRACE is not set
> > # CONFIG_SCSI_IPR_DUMP is not set
> > # CONFIG_SCSI_QLOGIC_FC is not set
> > # CONFIG_SCSI_QLOGIC_1280 is not set
> > CONFIG_SCSI_QLA2XXX=y
> > # CONFIG_SCSI_QLA21XX is not set
> > # CONFIG_SCSI_QLA22XX is not set
> > # CONFIG_SCSI_QLA2300 is not set
> > # CONFIG_SCSI_QLA2322 is not set
> > # CONFIG_SCSI_QLA6312 is not set
> > # CONFIG_SCSI_QLA24XX is not set
> > # CONFIG_SCSI_LPFC is not set
> > # CONFIG_SCSI_DC395x is not set
> > # CONFIG_SCSI_DC390T is not set
> > # CONFIG_SCSI_DEBUG is not set
> >
> > #
> > # Multi-device support (RAID and LVM)
> > #
> > CONFIG_MD=y
> > CONFIG_BLK_DEV_MD=y
> > CONFIG_MD_LINEAR=y
> > CONFIG_MD_RAID0=y
> > CONFIG_MD_RAID1=y
> > CONFIG_MD_RAID10=y
> > CONFIG_MD_RAID5=y
> > CONFIG_MD_RAID6=y
> > # CONFIG_MD_MULTIPATH is not set
> > # CONFIG_MD_FAULTY is not set
> > # CONFIG_BLK_DEV_DM is not set
> >
> > #
> > # Fusion MPT device support
> > #
> > CONFIG_FUSION=y
> > CONFIG_FUSION_SPI=y
> > # CONFIG_FUSION_FC is not set
> > # CONFIG_FUSION_SAS is not set
> > CONFIG_FUSION_MAX_SGE=128
> > # CONFIG_FUSION_CTL is not set
> >
> > #
> > # IEEE 1394 (FireWire) support
> > #
> > # CONFIG_IEEE1394 is not set
> >
> > #
> > # I2O device support
> > #
> > # CONFIG_I2O is not set
> >
> > #
> > # Network device support
> > #
> > CONFIG_NETDEVICES=y
> > CONFIG_DUMMY=y
> > # CONFIG_BONDING is not set
> > # CONFIG_EQUALIZER is not set
> > # CONFIG_TUN is not set
> > # CONFIG_NET_SB1000 is not set
> >
> > #
> > # ARCnet devices
> > #
> > # CONFIG_ARCNET is not set
> >
> > #
> > # PHY device support
> > #
> > # CONFIG_PHYLIB is not set
> >
> > #
> > # Ethernet (10 or 100Mbit)
> > #
> > CONFIG_NET_ETHERNET=y
> > CONFIG_MII=y
> > # CONFIG_HAPPYMEAL is not set
> > # CONFIG_SUNGEM is not set
> > # CONFIG_CASSINI is not set
> > # CONFIG_NET_VENDOR_3COM is not set
> >
> > #
> > # Tulip family network device support
> > #
> > # CONFIG_NET_TULIP is not set
> > # CONFIG_HP100 is not set
> > CONFIG_NET_PCI=y
> > # CONFIG_PCNET32 is not set
> > # CONFIG_AMD8111_ETH is not set
> > # CONFIG_ADAPTEC_STARFIRE is not set
> > # CONFIG_B44 is not set
> > # CONFIG_FORCEDETH is not set
> > # CONFIG_DGRS is not set
> > # CONFIG_EEPRO100 is not set
> > CONFIG_E100=y
> > # CONFIG_FEALNX is not set
> > # CONFIG_NATSEMI is not set
> > # CONFIG_NE2K_PCI is not set
> > # CONFIG_8139CP is not set
> > # CONFIG_8139TOO is not set
> > # CONFIG_SIS900 is not set
> > # CONFIG_EPIC100 is not set
> > # CONFIG_SUNDANCE is not set
> > # CONFIG_VIA_RHINE is not set
> >
> > #
> > # Ethernet (1000 Mbit)
> > #
> > # CONFIG_ACENIC is not set
> > # CONFIG_DL2K is not set
> > CONFIG_E1000=y
> > CONFIG_E1000_NAPI=y
> > # CONFIG_NS83820 is not set
> > # CONFIG_HAMACHI is not set
> > # CONFIG_YELLOWFIN is not set
> > # CONFIG_R8169 is not set
> > # CONFIG_SIS190 is not set
> > # CONFIG_SKGE is not set
> > # CONFIG_SK98LIN is not set
> > # CONFIG_VIA_VELOCITY is not set
> > # CONFIG_TIGON3 is not set
> > # CONFIG_BNX2 is not set
> >
> > #
> > # Ethernet (10000 Mbit)
> > #
> > # CONFIG_CHELSIO_T1 is not set
> > # CONFIG_IXGB is not set
> > # CONFIG_S2IO is not set
> >
> > #
> > # Token Ring devices
> > #
> > # CONFIG_TR is not set
> >
> > #
> > # Wireless LAN (non-hamradio)
> > #
> > # CONFIG_NET_RADIO is not set
> >
> > #
> > # Wan interfaces
> > #
> > # CONFIG_WAN is not set
> > # CONFIG_FDDI is not set
> > # CONFIG_HIPPI is not set
> > # CONFIG_PPP is not set
> > # CONFIG_SLIP is not set
> > # CONFIG_NET_FC is not set
> > # CONFIG_SHAPER is not set
> > # CONFIG_NETCONSOLE is not set
> > # CONFIG_NETPOLL is not set
> > # CONFIG_NET_POLL_CONTROLLER is not set
> >
> > #
> > # ISDN subsystem
> > #
> > # CONFIG_ISDN is not set
> >
> > #
> > # Telephony Support
> > #
> > # CONFIG_PHONE is not set
> >
> > #
> > # Input device support
> > #
> > CONFIG_INPUT=y
> >
> > #
> > # Userland interfaces
> > #
> > CONFIG_INPUT_MOUSEDEV=y
> > # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> > # CONFIG_INPUT_JOYDEV is not set
> > # CONFIG_INPUT_TSDEV is not set
> > # CONFIG_INPUT_EVDEV is not set
> > # CONFIG_INPUT_EVBUG is not set
> >
> > #
> > # Input Device Drivers
> > #
> > CONFIG_INPUT_KEYBOARD=y
> > CONFIG_KEYBOARD_ATKBD=y
> > # CONFIG_KEYBOARD_SUNKBD is not set
> > # CONFIG_KEYBOARD_LKKBD is not set
> > # CONFIG_KEYBOARD_XTKBD is not set
> > # CONFIG_KEYBOARD_NEWTON is not set
> > # CONFIG_INPUT_MOUSE is not set
> > # CONFIG_INPUT_JOYSTICK is not set
> > # CONFIG_INPUT_TOUCHSCREEN is not set
> > # CONFIG_INPUT_MISC is not set
> >
> > #
> > # Hardware I/O ports
> > #
> > CONFIG_SERIO=y
> > CONFIG_SERIO_I8042=y
> > # CONFIG_SERIO_SERPORT is not set
> > # CONFIG_SERIO_CT82C710 is not set
> > # CONFIG_SERIO_PCIPS2 is not set
> > CONFIG_SERIO_LIBPS2=y
> > # CONFIG_SERIO_RAW is not set
> > # CONFIG_GAMEPORT is not set
> >
> > #
> > # Character devices
> > #
> > CONFIG_VT=y
> > CONFIG_VT_CONSOLE=y
> > CONFIG_HW_CONSOLE=y
> > # CONFIG_SERIAL_NONSTANDARD is not set
> >
> > #
> > # Serial drivers
> > #
> > CONFIG_SERIAL_8250=y
> > # CONFIG_SERIAL_8250_CONSOLE is not set
> > # CONFIG_SERIAL_8250_ACPI is not set
> > CONFIG_SERIAL_8250_NR_UARTS=4
> > # CONFIG_SERIAL_8250_EXTENDED is not set
> >
> > #
> > # Non-8250 serial port support
> > #
> > CONFIG_SERIAL_CORE=y
> > # CONFIG_SERIAL_JSM is not set
> > CONFIG_UNIX98_PTYS=y
> > CONFIG_LEGACY_PTYS=y
> > CONFIG_LEGACY_PTY_COUNT=256
> >
> > #
> > # IPMI
> > #
> > # CONFIG_IPMI_HANDLER is not set
> >
> > #
> > # Watchdog Cards
> > #
> > CONFIG_WATCHDOG=y
> > # CONFIG_WATCHDOG_NOWAYOUT is not set
> >
> > #
> > # Watchdog Device Drivers
> > #
> > # CONFIG_SOFT_WATCHDOG is not set
> > # CONFIG_ACQUIRE_WDT is not set
> > # CONFIG_ADVANTECH_WDT is not set
> > # CONFIG_ALIM1535_WDT is not set
> > # CONFIG_ALIM7101_WDT is not set
> > # CONFIG_SC520_WDT is not set
> > # CONFIG_EUROTECH_WDT is not set
> > # CONFIG_IB700_WDT is not set
> > # CONFIG_IBMASR is not set
> > # CONFIG_WAFER_WDT is not set
> > CONFIG_I6300ESB_WDT=y
> > # CONFIG_I8XX_TCO is not set
> > # CONFIG_SC1200_WDT is not set
> > # CONFIG_60XX_WDT is not set
> > # CONFIG_SBC8360_WDT is not set
> > # CONFIG_CPU5_WDT is not set
> > # CONFIG_W83627HF_WDT is not set
> > # CONFIG_W83877F_WDT is not set
> > # CONFIG_W83977F_WDT is not set
> > # CONFIG_MACHZ_WDT is not set
> >
> > #
> > # PCI-based Watchdog Cards
> > #
> > # CONFIG_PCIPCWATCHDOG is not set
> > # CONFIG_WDTPCI is not set
> > # CONFIG_HW_RANDOM is not set
> > # CONFIG_NVRAM is not set
> > # CONFIG_RTC is not set
> > # CONFIG_GEN_RTC is not set
> > # CONFIG_R3964 is not set
> > # CONFIG_APPLICOM is not set
> >
> > #
> > # Ftape, the floppy tape device driver
> > #
> > CONFIG_AGP=y
> > CONFIG_AGP_AMD64=y
> > # CONFIG_AGP_INTEL is not set
> > # CONFIG_DRM is not set
> > # CONFIG_MWAVE is not set
> > # CONFIG_RAW_DRIVER is not set
> > # CONFIG_HPET is not set
> > # CONFIG_HANGCHECK_TIMER is not set
> >
> > #
> > # TPM devices
> > #
> > # CONFIG_TCG_TPM is not set
> >
> > #
> > # I2C support
> > #
> > CONFIG_I2C=y
> > CONFIG_I2C_CHARDEV=y
> >
> > #
> > # I2C Algorithms
> > #
> > CONFIG_I2C_ALGOBIT=y
> > # CONFIG_I2C_ALGOPCF is not set
> > # CONFIG_I2C_ALGOPCA is not set
> >
> > #
> > # I2C Hardware Bus support
> > #
> > # CONFIG_I2C_ALI1535 is not set
> > # CONFIG_I2C_ALI1563 is not set
> > # CONFIG_I2C_ALI15X3 is not set
> > # CONFIG_I2C_AMD756 is not set
> > # CONFIG_I2C_AMD8111 is not set
> > CONFIG_I2C_I801=y
> > CONFIG_I2C_I810=y
> > CONFIG_I2C_PIIX4=y
> > # CONFIG_I2C_NFORCE2 is not set
> > # CONFIG_I2C_PARPORT_LIGHT is not set
> > # CONFIG_I2C_PROSAVAGE is not set
> > # CONFIG_I2C_SAVAGE4 is not set
> > # CONFIG_SCx200_ACB is not set
> > # CONFIG_I2C_SIS5595 is not set
> > # CONFIG_I2C_SIS630 is not set
> > # CONFIG_I2C_SIS96X is not set
> > # CONFIG_I2C_VIA is not set
> > # CONFIG_I2C_VIAPRO is not set
> > # CONFIG_I2C_VOODOO3 is not set
> > # CONFIG_I2C_PCA_ISA is not set
> >
> > #
> > # Miscellaneous I2C Chip support
> > #
> > # CONFIG_SENSORS_DS1337 is not set
> > # CONFIG_SENSORS_DS1374 is not set
> > # CONFIG_SENSORS_EEPROM is not set
> > # CONFIG_SENSORS_PCF8574 is not set
> > # CONFIG_SENSORS_PCA9539 is not set
> > # CONFIG_SENSORS_PCF8591 is not set
> > # CONFIG_SENSORS_RTC8564 is not set
> > # CONFIG_SENSORS_MAX6875 is not set
> > # CONFIG_I2C_DEBUG_CORE is not set
> > # CONFIG_I2C_DEBUG_ALGO is not set
> > # CONFIG_I2C_DEBUG_BUS is not set
> > # CONFIG_I2C_DEBUG_CHIP is not set
> >
> > #
> > # Dallas's 1-wire bus
> > #
> > # CONFIG_W1 is not set
> >
> > #
> > # Hardware Monitoring support
> > #
> > CONFIG_HWMON=y
> > # CONFIG_HWMON_VID is not set
> > # CONFIG_SENSORS_ADM1021 is not set
> > # CONFIG_SENSORS_ADM1025 is not set
> > # CONFIG_SENSORS_ADM1026 is not set
> > # CONFIG_SENSORS_ADM1031 is not set
> > # CONFIG_SENSORS_ADM9240 is not set
> > # CONFIG_SENSORS_ASB100 is not set
> > # CONFIG_SENSORS_ATXP1 is not set
> > # CONFIG_SENSORS_DS1621 is not set
> > # CONFIG_SENSORS_FSCHER is not set
> > # CONFIG_SENSORS_FSCPOS is not set
> > # CONFIG_SENSORS_GL518SM is not set
> > # CONFIG_SENSORS_GL520SM is not set
> > # CONFIG_SENSORS_IT87 is not set
> > # CONFIG_SENSORS_LM63 is not set
> > # CONFIG_SENSORS_LM75 is not set
> > # CONFIG_SENSORS_LM77 is not set
> > # CONFIG_SENSORS_LM78 is not set
> > # CONFIG_SENSORS_LM80 is not set
> > # CONFIG_SENSORS_LM83 is not set
> > # CONFIG_SENSORS_LM85 is not set
> > # CONFIG_SENSORS_LM87 is not set
> > # CONFIG_SENSORS_LM90 is not set
> > # CONFIG_SENSORS_LM92 is not set
> > # CONFIG_SENSORS_MAX1619 is not set
> > # CONFIG_SENSORS_PC87360 is not set
> > # CONFIG_SENSORS_SIS5595 is not set
> > # CONFIG_SENSORS_SMSC47M1 is not set
> > # CONFIG_SENSORS_SMSC47B397 is not set
> > # CONFIG_SENSORS_VIA686A is not set
> > # CONFIG_SENSORS_W83781D is not set
> > # CONFIG_SENSORS_W83792D is not set
> > # CONFIG_SENSORS_W83L785TS is not set
> > # CONFIG_SENSORS_W83627HF is not set
> > # CONFIG_SENSORS_W83627EHF is not set
> > # CONFIG_SENSORS_HDAPS is not set
> > # CONFIG_HWMON_DEBUG_CHIP is not set
> >
> > #
> > # Misc devices
> > #
> > # CONFIG_IBM_ASM is not set
> >
> > #
> > # Multimedia Capabilities Port drivers
> > #
> >
> > #
> > # Multimedia devices
> > #
> > # CONFIG_VIDEO_DEV is not set
> >
> > #
> > # Digital Video Broadcasting Devices
> > #
> > # CONFIG_DVB is not set
> >
> > #
> > # Graphics support
> > #
> > # CONFIG_FB is not set
> > # CONFIG_VIDEO_SELECT is not set
> >
> > #
> > # Console display driver support
> > #
> > CONFIG_VGA_CONSOLE=y
> > CONFIG_DUMMY_CONSOLE=y
> >
> > #
> > # Sound
> > #
> > # CONFIG_SOUND is not set
> >
> > #
> > # USB support
> > #
> > CONFIG_USB_ARCH_HAS_HCD=y
> > CONFIG_USB_ARCH_HAS_OHCI=y
> > # CONFIG_USB is not set
> >
> > #
> > # USB Gadget Support
> > #
> > # CONFIG_USB_GADGET is not set
> >
> > #
> > # MMC/SD Card support
> > #
> > # CONFIG_MMC is not set
> >
> > #
> > # InfiniBand support
> > #
> > # CONFIG_INFINIBAND is not set
> >
> > #
> > # SN Devices
> > #
> >
> > #
> > # Firmware Drivers
> > #
> > # CONFIG_EDD is not set
> > # CONFIG_DELL_RBU is not set
> > # CONFIG_DCDBAS is not set
> >
> > #
> > # File systems
> > #
> > CONFIG_EXT2_FS=y
> > # CONFIG_EXT2_FS_XATTR is not set
> > # CONFIG_EXT2_FS_XIP is not set
> > CONFIG_EXT3_FS=y
> > CONFIG_EXT3_FS_XATTR=y
> > # CONFIG_EXT3_FS_POSIX_ACL is not set
> > # CONFIG_EXT3_FS_SECURITY is not set
> > CONFIG_JBD=y
> > # CONFIG_JBD_DEBUG is not set
> > CONFIG_FS_MBCACHE=y
> > # CONFIG_REISERFS_FS is not set
> > # CONFIG_JFS_FS is not set
> > CONFIG_FS_POSIX_ACL=y
> > # CONFIG_XFS_FS is not set
> > # CONFIG_MINIX_FS is not set
> > # CONFIG_ROMFS_FS is not set
> > CONFIG_INOTIFY=y
> > # CONFIG_QUOTA is not set
> > CONFIG_DNOTIFY=y
> > # CONFIG_AUTOFS_FS is not set
> > CONFIG_AUTOFS4_FS=y
> > # CONFIG_FUSE_FS is not set
> >
> > #
> > # CD-ROM/DVD Filesystems
> > #
> > # CONFIG_ISO9660_FS is not set
> > # CONFIG_UDF_FS is not set
> >
> > #
> > # DOS/FAT/NT Filesystems
> > #
> > # CONFIG_MSDOS_FS is not set
> > # CONFIG_VFAT_FS is not set
> > # CONFIG_NTFS_FS is not set
> >
> > #
> > # Pseudo filesystems
> > #
> > CONFIG_PROC_FS=y
> > CONFIG_SYSFS=y
> > CONFIG_TMPFS=y
> > # CONFIG_HUGETLBFS is not set
> > # CONFIG_HUGETLB_PAGE is not set
> > CONFIG_RAMFS=y
> > # CONFIG_RELAYFS_FS is not set
> >
> > #
> > # Miscellaneous filesystems
> > #
> > # CONFIG_ADFS_FS is not set
> > # CONFIG_AFFS_FS is not set
> > # CONFIG_HFS_FS is not set
> > # CONFIG_HFSPLUS_FS is not set
> > # CONFIG_BEFS_FS is not set
> > # CONFIG_BFS_FS is not set
> > # CONFIG_EFS_FS is not set
> > # CONFIG_CRAMFS is not set
> > # CONFIG_SQUASHFS is not set
> > # CONFIG_VXFS_FS is not set
> > # CONFIG_HPFS_FS is not set
> > # CONFIG_QNX4FS_FS is not set
> > # CONFIG_SYSV_FS is not set
> > # CONFIG_UFS_FS is not set
> >
> > #
> > # Network File Systems
> > #
> > CONFIG_NFS_FS=y
> > CONFIG_NFS_V3=y
> > # CONFIG_NFS_V3_ACL is not set
> > CONFIG_NFS_V4=y
> > # CONFIG_NFS_DIRECTIO is not set
> > CONFIG_NFSD=y
> > CONFIG_NFSD_V3=y
> > # CONFIG_NFSD_V3_ACL is not set
> > CONFIG_NFSD_V4=y
> > CONFIG_NFSD_TCP=y
> > CONFIG_LOCKD=y
> > CONFIG_LOCKD_V4=y
> > CONFIG_EXPORTFS=y
> > CONFIG_NFS_COMMON=y
> > CONFIG_SUNRPC=y
> > CONFIG_SUNRPC_GSS=y
> > CONFIG_RPCSEC_GSS_KRB5=y
> > # CONFIG_RPCSEC_GSS_SPKM3 is not set
> > # CONFIG_SMB_FS is not set
> > # CONFIG_CIFS is not set
> > # CONFIG_NCP_FS is not set
> > # CONFIG_CODA_FS is not set
> > # CONFIG_AFS_FS is not set
> > # CONFIG_9P_FS is not set
> >
> > #
> > # Partition Types
> > #
> > # CONFIG_PARTITION_ADVANCED is not set
> > CONFIG_MSDOS_PARTITION=y
> >
> > #
> > # Native Language Support
> > #
> > CONFIG_NLS=y
> > CONFIG_NLS_DEFAULT="utf8"
> > CONFIG_NLS_CODEPAGE_437=y
> > # CONFIG_NLS_CODEPAGE_737 is not set
> > # CONFIG_NLS_CODEPAGE_775 is not set
> > CONFIG_NLS_CODEPAGE_850=y
> > # CONFIG_NLS_CODEPAGE_852 is not set
> > # CONFIG_NLS_CODEPAGE_855 is not set
> > # CONFIG_NLS_CODEPAGE_857 is not set
> > # CONFIG_NLS_CODEPAGE_860 is not set
> > # CONFIG_NLS_CODEPAGE_861 is not set
> > # CONFIG_NLS_CODEPAGE_862 is not set
> > # CONFIG_NLS_CODEPAGE_863 is not set
> > # CONFIG_NLS_CODEPAGE_864 is not set
> > # CONFIG_NLS_CODEPAGE_865 is not set
> > # CONFIG_NLS_CODEPAGE_866 is not set
> > # CONFIG_NLS_CODEPAGE_869 is not set
> > # CONFIG_NLS_CODEPAGE_936 is not set
> > # CONFIG_NLS_CODEPAGE_950 is not set
> > # CONFIG_NLS_CODEPAGE_932 is not set
> > # CONFIG_NLS_CODEPAGE_949 is not set
> > # CONFIG_NLS_CODEPAGE_874 is not set
> > # CONFIG_NLS_ISO8859_8 is not set
> > # CONFIG_NLS_CODEPAGE_1250 is not set
> > # CONFIG_NLS_CODEPAGE_1251 is not set
> > CONFIG_NLS_ASCII=y
> > CONFIG_NLS_ISO8859_1=y
> > # CONFIG_NLS_ISO8859_2 is not set
> > # CONFIG_NLS_ISO8859_3 is not set
> > # CONFIG_NLS_ISO8859_4 is not set
> > # CONFIG_NLS_ISO8859_5 is not set
> > # CONFIG_NLS_ISO8859_6 is not set
> > # CONFIG_NLS_ISO8859_7 is not set
> > # CONFIG_NLS_ISO8859_9 is not set
> > # CONFIG_NLS_ISO8859_13 is not set
> > # CONFIG_NLS_ISO8859_14 is not set
> > CONFIG_NLS_ISO8859_15=y
> > # CONFIG_NLS_KOI8_R is not set
> > # CONFIG_NLS_KOI8_U is not set
> > CONFIG_NLS_UTF8=y
> >
> > #
> > # Profiling support
> > #
> > # CONFIG_PROFILING is not set
> >
> > #
> > # Kernel hacking
> > #
> > # CONFIG_PRINTK_TIME is not set
> > # CONFIG_DEBUG_KERNEL is not set
> > CONFIG_LOG_BUF_SHIFT=15
> >
> > #
> > # Security options
> > #
> >
> > #
> > # PaX
> > #
> > CONFIG_PAX=y
> >
> > #
> > # PaX Control
> > #
> > # CONFIG_PAX_SOFTMODE is not set
> > CONFIG_PAX_EI_PAX=y
> > CONFIG_PAX_PT_PAX_FLAGS=y
> > # CONFIG_PAX_NO_ACL_FLAGS is not set
> > CONFIG_PAX_HAVE_ACL_FLAGS=y
> > # CONFIG_PAX_HOOK_ACL_FLAGS is not set
> >
> > #
> > # Non-executable pages
> > #
> > CONFIG_PAX_NOEXEC=y
> > # CONFIG_PAX_PAGEEXEC is not set
> >
> > #
> > # Address Space Layout Randomization
> > #
> > CONFIG_PAX_ASLR=y
> > CONFIG_PAX_RANDUSTACK=y
> > CONFIG_PAX_RANDMMAP=y
> >
> > #
> > # Grsecurity
> > #
> > CONFIG_GRKERNSEC=y
> > # CONFIG_GRKERNSEC_LOW is not set
> > # CONFIG_GRKERNSEC_MEDIUM is not set
> > # CONFIG_GRKERNSEC_HIGH is not set
> > CONFIG_GRKERNSEC_CUSTOM=y
> >
> > #
> > # Address Space Protection
> > #
> > # CONFIG_GRKERNSEC_KMEM is not set
> > # CONFIG_GRKERNSEC_IO is not set
> > # CONFIG_GRKERNSEC_PROC_MEMMAP is not set
> > # CONFIG_GRKERNSEC_BRUTE is not set
> > CONFIG_GRKERNSEC_HIDESYM=y
> >
> > #
> > # Role Based Access Control Options
> > #
> > CONFIG_GRKERNSEC_ACL_HIDEKERN=y
> > CONFIG_GRKERNSEC_ACL_MAXTRIES=3
> > CONFIG_GRKERNSEC_ACL_TIMEOUT=30
> >
> > #
> > # Filesystem Protections
> > #
> > CONFIG_GRKERNSEC_PROC=y
> > # CONFIG_GRKERNSEC_PROC_USER is not set
> > CONFIG_GRKERNSEC_PROC_USERGROUP=y
> > CONFIG_GRKERNSEC_PROC_GID=10
> > CONFIG_GRKERNSEC_PROC_ADD=y
> > CONFIG_GRKERNSEC_LINK=y
> > CONFIG_GRKERNSEC_FIFO=y
> > CONFIG_GRKERNSEC_CHROOT=y
> > CONFIG_GRKERNSEC_CHROOT_MOUNT=y
> > CONFIG_GRKERNSEC_CHROOT_DOUBLE=y
> > CONFIG_GRKERNSEC_CHROOT_PIVOT=y
> > CONFIG_GRKERNSEC_CHROOT_CHDIR=y
> > CONFIG_GRKERNSEC_CHROOT_CHMOD=y
> > CONFIG_GRKERNSEC_CHROOT_FCHDIR=y
> > CONFIG_GRKERNSEC_CHROOT_MKNOD=y
> > CONFIG_GRKERNSEC_CHROOT_SHMAT=y
> > CONFIG_GRKERNSEC_CHROOT_UNIX=y
> > CONFIG_GRKERNSEC_CHROOT_FINDTASK=y
> > CONFIG_GRKERNSEC_CHROOT_NICE=y
> > CONFIG_GRKERNSEC_CHROOT_SYSCTL=y
> > CONFIG_GRKERNSEC_CHROOT_CAPS=y
> >
> > #
> > # Kernel Auditing
> > #
> > # CONFIG_GRKERNSEC_AUDIT_GROUP is not set
> > CONFIG_GRKERNSEC_EXECLOG=y
> > CONFIG_GRKERNSEC_RESLOG=y
> > CONFIG_GRKERNSEC_CHROOT_EXECLOG=y
> > CONFIG_GRKERNSEC_AUDIT_CHDIR=y
> > CONFIG_GRKERNSEC_AUDIT_MOUNT=y
> > CONFIG_GRKERNSEC_AUDIT_IPC=y
> > CONFIG_GRKERNSEC_SIGNAL=y
> > CONFIG_GRKERNSEC_FORKFAIL=y
> > CONFIG_GRKERNSEC_TIME=y
> > CONFIG_GRKERNSEC_PROC_IPADDR=y
> >
> > #
> > # Executable Protections
> > #
> > CONFIG_GRKERNSEC_EXECVE=y
> > # CONFIG_GRKERNSEC_SHM is not set
> > CONFIG_GRKERNSEC_DMESG=y
> > CONFIG_GRKERNSEC_RANDPID=y
> > CONFIG_GRKERNSEC_TPE=y
> > CONFIG_GRKERNSEC_TPE_ALL=y
> > # CONFIG_GRKERNSEC_TPE_INVERT is not set
> > CONFIG_GRKERNSEC_TPE_GID=100
> >
> > #
> > # Network Protections
> > #
> > CONFIG_GRKERNSEC_RANDNET=y
> > CONFIG_GRKERNSEC_RANDSRC=y
> > # CONFIG_GRKERNSEC_SOCKET is not set
> >
> > #
> > # Sysctl support
> > #
> > CONFIG_GRKERNSEC_SYSCTL=y
> > # CONFIG_GRKERNSEC_SYSCTL_ON is not set
> >
> > #
> > # Logging Options
> > #
> > CONFIG_GRKERNSEC_FLOODTIME=10
> > CONFIG_GRKERNSEC_FLOODBURST=4
> > # CONFIG_KEYS is not set
> > # CONFIG_SECURITY is not set
> >
> > #
> > # Cryptographic options
> > #
> > CONFIG_CRYPTO=y
> > # CONFIG_CRYPTO_HMAC is not set
> > # CONFIG_CRYPTO_NULL is not set
> > # CONFIG_CRYPTO_MD4 is not set
> > CONFIG_CRYPTO_MD5=y
> > # CONFIG_CRYPTO_SHA1 is not set
> > CONFIG_CRYPTO_SHA256=y
> > # CONFIG_CRYPTO_SHA512 is not set
> > # CONFIG_CRYPTO_WP512 is not set
> > # CONFIG_CRYPTO_TGR192 is not set
> > CONFIG_CRYPTO_DES=y
> > # CONFIG_CRYPTO_BLOWFISH is not set
> > # CONFIG_CRYPTO_TWOFISH is not set
> > # CONFIG_CRYPTO_SERPENT is not set
> > # CONFIG_CRYPTO_AES_X86_64 is not set
> > # CONFIG_CRYPTO_CAST5 is not set
> > # CONFIG_CRYPTO_CAST6 is not set
> > # CONFIG_CRYPTO_TEA is not set
> > # CONFIG_CRYPTO_ARC4 is not set
> > # CONFIG_CRYPTO_KHAZAD is not set
> > # CONFIG_CRYPTO_ANUBIS is not set
> > # CONFIG_CRYPTO_DEFLATE is not set
> > # CONFIG_CRYPTO_MICHAEL_MIC is not set
> > # CONFIG_CRYPTO_CRC32C is not set
> > # CONFIG_CRYPTO_TEST is not set
> >
> > #
> > # Hardware crypto devices
> > #
> >
> > #
> > # Library routines
> > #
> > # CONFIG_CRC_CCITT is not set
> > # CONFIG_CRC16 is not set
> > CONFIG_CRC32=y
> > CONFIG_LIBCRC32C=y
> >
> > --
> > gentoo-user@gentoo.org mailing list
> >
> >
>
> --
> gentoo-user@gentoo.org mailing list
>
>
[-- Attachment #2: Type: text/html, Size: 109378 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user] Only one processor ?
2006-03-28 14:28 ` Keats
@ 2006-03-28 16:49 ` Richard Fish
2006-03-29 2:17 ` JimD
0 siblings, 1 reply; 14+ messages in thread
From: Richard Fish @ 2006-03-28 16:49 UTC (permalink / raw
To: gentoo-user
On 3/28/06, Keats <neokeats@wanadoo.fr> wrote:
> > Have you activated the ht at the system bios??
>
> i don't think it can be that...
> it's a server, i haven't access physicaly to it... so i can't modify
> bios settings...
> and i suppose my prodider have the set like it would be...
It absolutely can be that. HT requires BIOS support, and there is
usually an option to enable or disable it.
-Richard
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user] Only one processor ?
2006-03-28 13:18 [gentoo-user] Only one processor ? Keats
2006-03-28 13:48 ` Javier Payno
2006-03-28 14:41 ` Fernando Antunes
@ 2006-03-28 17:16 ` kashani
2006-03-28 18:01 ` [solved] " Keats
3 siblings, 0 replies; 14+ messages in thread
From: kashani @ 2006-03-28 17:16 UTC (permalink / raw
To: gentoo-user
Keats wrote:
> Hi,
> on a recent gentoo installation,
> i ve noticed that i have only one of my processor detected...
> i have dual xeon ht so i should have 4 processors detected but i only
> have two, like on my xeon ht...
> physical id : 0 for the two processors detected means that only one
> physicval processor is detected...
I'd suspect the bios at this point. The other gotcha is that without
ACPI in 2.6.15... and maybe earlier you don't see the HT CPUs either.
That looks fine in your config so I don't think it's your kernel.
I do recall reading some articles recently about HT being not so good
in server environments. It's possible your provider sets them up without
hT by default.
kashani
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 14+ messages in thread
* [solved] Re: [gentoo-user] Only one processor ?
2006-03-28 13:18 [gentoo-user] Only one processor ? Keats
` (2 preceding siblings ...)
2006-03-28 17:16 ` kashani
@ 2006-03-28 18:01 ` Keats
3 siblings, 0 replies; 14+ messages in thread
From: Keats @ 2006-03-28 18:01 UTC (permalink / raw
To: gentoo-user
thanx all for your suggestions.
it wasn't a config problem.
it's all about my provider. :)
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user] Only one processor ?
2006-03-28 16:49 ` Richard Fish
@ 2006-03-29 2:17 ` JimD
0 siblings, 0 replies; 14+ messages in thread
From: JimD @ 2006-03-29 2:17 UTC (permalink / raw
To: gentoo-user
On Tue, 28 Mar 2006 09:49:09 -0700
"Richard Fish" <bigfish@asmallpond.org> wrote:
> On 3/28/06, Keats <neokeats@wanadoo.fr> wrote:
> > > Have you activated the ht at the system bios??
> >
> > i don't think it can be that...
> > it's a server, i haven't access physicaly to it... so i can't modify
> > bios settings...
> > and i suppose my prodider have the set like it would be...
>
> It absolutely can be that. HT requires BIOS support, and there is
> usually an option to enable or disable it.
>
> -Richard
I want to second this. We got 3 freebie dual 3.2 GHz xeons with HT from
HP a few months back. I am pretty certain that he bios had HT support
off by defualt.
Jim
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2006-03-29 2:22 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-03-28 13:18 [gentoo-user] Only one processor ? Keats
2006-03-28 13:48 ` Javier Payno
2006-03-28 13:59 ` Dirk Heinrichs
2006-03-28 14:12 ` Alexander Skwar
2006-03-28 14:23 ` Dirk Heinrichs
2006-03-28 14:30 ` Keats
2006-03-28 14:28 ` Keats
2006-03-28 16:49 ` Richard Fish
2006-03-29 2:17 ` JimD
2006-03-28 14:41 ` Fernando Antunes
2006-03-28 14:57 ` Keats
2006-03-28 16:30 ` Fernando Antunes
2006-03-28 17:16 ` kashani
2006-03-28 18:01 ` [solved] " Keats
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox