* [gentoo-user] WLAN @ 2006-03-06 15:03 Goran Maksimoviæ 2006-03-06 16:17 ` Daniel da Veiga 0 siblings, 1 reply; 4+ messages in thread From: Goran Maksimoviæ @ 2006-03-06 15:03 UTC (permalink / raw To: gentoo-user Hello! I have recently subscribed to this mailing list so if someone has already asked this question I apologize in advance. I installed yesterday Gentoo 2006.0 with LiveCD on my laptop hp nx9105 and I'm looking how to setup my wireless card. I know that their aren't WLAN card drivers for Linux but I know that I can use my Windows XP drivers with ndiswrapper package, so my question is what is the procedure to setup my WLAN card. Goran ---------------------- T - C o m - - W e b m a i l ---------------------- Ova poruka poslana je upotrebom T-Com Webmail usluge. Postani redatelj najgledanijeg hrvatskog filma! http://www.tportal.hr/100sekundislave/ -- gentoo-user@gentoo.org mailing list ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [gentoo-user] WLAN 2006-03-06 15:03 [gentoo-user] WLAN Goran Maksimoviæ @ 2006-03-06 16:17 ` Daniel da Veiga 0 siblings, 0 replies; 4+ messages in thread From: Daniel da Veiga @ 2006-03-06 16:17 UTC (permalink / raw To: gentoo-user On 3/6/06, Goran Maksimoviæ <goran.maksimovic@ri.htnet.hr> wrote: > Hello! > > I have recently subscribed to this mailing list so if someone has already asked > this question I apologize in advance. I installed yesterday Gentoo 2006.0 with > LiveCD on my laptop hp nx9105 and I'm looking how to setup my wireless card. I > know that their aren't WLAN card drivers for Linux but I know that I can use my > Windows XP drivers with ndiswrapper package, so my question is what is the > procedure to setup my WLAN card. > > Goran > http://www.unicolet.org/nx9105.html http://gentoo-wiki.com/HOWTO_Wireless_Configuration_and_Startup It can't be better than that :) good luck... Don't forget to thank Umberto Nicoletti for his complete description on how to make your system work... > > ---------------------- T - C o m - - W e b m a i l ---------------------- > Ova poruka poslana je upotrebom T-Com Webmail usluge. > Postani redatelj najgledanijeg hrvatskog filma! > http://www.tportal.hr/100sekundislave/ > > > > -- > gentoo-user@gentoo.org mailing list > > -- Daniel da Veiga Computer Operator - RS - Brazil -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCM/IT/P/O d-? s:- a? C++$ UBLA++ P+ L++ E--- W+++$ N o+ K- w O M- V- PS PE Y PGP- t+ 5 X+++ R+* tv b+ DI+++ D+ G+ e h+ r+ y++ ------END GEEK CODE BLOCK------ -- gentoo-user@gentoo.org mailing list ^ permalink raw reply [flat|nested] 4+ messages in thread
* [gentoo-user] wlan @ 2010-03-23 18:39 Thomas Bruns 2010-03-23 18:42 ` Thomas Bruns 0 siblings, 1 reply; 4+ messages in thread From: Thomas Bruns @ 2010-03-23 18:39 UTC (permalink / raw To: gentoo-user Hello NGs, when connect my usb-wlan-stick i get this message: usb 1-5: USB disconnect, address 3 usb 1-5: new high speed USB device using ehci_hcd and address 4 usb 1-5: New USB device found, idVendor=0df6, idProduct=0040 usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-5: Product: 802.11 n WLAN usb 1-5: Manufacturer: Ralink usb 1-5: SerialNumber: 1.0 usb 1-5: configuration #1 chosen from 1 choice phy1 -> rt2x00_set_chip: Info - Chipset detected - rt: 1600, rf: 0007, rev: 30710211. phy1 -> rt2800usb_init_eeprom: Error - Invalid RT chipset detected. phy1 -> rt2x00lib_probe_dev: Error - Failed to allocate device. I use a 2.6.31-gentoo-r10 Kernel. Can everybody help me? -- Gruß Thomas --- CBUILD="x86_64-pc-linux-gnu" CFLAGS="-march=core2 -O2 -msse4.1 -msse4.2 -pipe" CXXFLAGS="-march=core2 -O2 -msse4.1 -msse4.2 -pipe" LDFLAGS="-Wl,-O1,--hash-style=gnu,--sort-common,--as-needed" ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [gentoo-user] wlan 2010-03-23 18:39 [gentoo-user] wlan Thomas Bruns @ 2010-03-23 18:42 ` Thomas Bruns 0 siblings, 0 replies; 4+ messages in thread From: Thomas Bruns @ 2010-03-23 18:42 UTC (permalink / raw To: gentoo-user Am Dienstag 23 März 2010 19:39:32 schrieb Thomas Bruns: > Hello NGs, > > when connect my usb-wlan-stick i get this message: > > usb 1-5: USB disconnect, address 3 > usb 1-5: new high speed USB device using ehci_hcd and address 4 > usb 1-5: New USB device found, idVendor=0df6, idProduct=0040 > usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > usb 1-5: Product: 802.11 n WLAN > usb 1-5: Manufacturer: Ralink > usb 1-5: SerialNumber: 1.0 > usb 1-5: configuration #1 chosen from 1 choice > phy1 -> rt2x00_set_chip: Info - Chipset detected - rt: 1600, rf: 0007, rev: > 30710211. > phy1 -> rt2800usb_init_eeprom: Error - Invalid RT chipset detected. > phy1 -> rt2x00lib_probe_dev: Error - Failed to allocate device. > > I use a 2.6.31-gentoo-r10 Kernel. > > Can everybody help me? > lsmod | grep rt rt2800usb 37944 0 rt2x00usb 12136 1 rt2800usb rt2x00lib 31656 2 rt2800usb,rt2x00usb led_class 4976 1 rt2x00lib input_polldev 4376 1 rt2x00lib mac80211 137976 2 rt2x00usb,rt2x00lib cfg80211 92672 2 rt2x00lib,mac80211 crc_ccitt 2264 1 rt2800usb rtc 7960 0 usbcore 145764 12 rt2800usb,rt2x00usb,uvcvideo,snd_usb_audio,snd_usb_lib,sl811_hcd,usbhid,ohci_hcd,uhci_hcd,usb_storage,ehci_hcd scsi_transport_sas 30488 3 aic94xx,libsas,mptsas scsi_transport_fc 47180 3 lpfc,qla2xxx,mptfc scsi_tgt 13200 1 scsi_transport_fc scsi_transport_spi 24904 5 mptspi,dmx3191d,sym53c8xx,aic7xxx,aic79xx firmware_class 9192 8 rt2x00lib,tg3,aic94xx,libsas,qla2xxx,qla1280,advansys,pcmcia pata_artop 6924 0 -- Gruß Thomas --- CBUILD="x86_64-pc-linux-gnu" CFLAGS="-march=core2 -O2 -msse4.1 -msse4.2 -pipe" CXXFLAGS="-march=core2 -O2 -msse4.1 -msse4.2 -pipe" LDFLAGS="-Wl,-O1,--hash-style=gnu,--sort-common,--as-needed" ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-03-23 18:43 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2006-03-06 15:03 [gentoo-user] WLAN Goran Maksimoviæ 2006-03-06 16:17 ` Daniel da Veiga -- strict thread matches above, loose matches on Subject: below -- 2010-03-23 18:39 [gentoo-user] wlan Thomas Bruns 2010-03-23 18:42 ` Thomas Bruns
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox