[gentoo-user] lspci shows 2 entries for video card?

[gentoo-user] lspci shows 2 entries for video card?

[Walter Dnes]

  I'm trying to see if I can tweak things a little bit.  Here are the
last 2 entries from the output of "lspci -v"...

05:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60
[Radeon X300
(PCIE)] (prog-if 00 [VGA])
        Subsystem: ATI Technologies Inc Unknown device 1b60
        Flags: bus master, fast devsel, latency 0, IRQ 5
        Memory at e0000000 (32-bit, prefetchable) [size=128M]
        I/O ports at 9000 [size=256]
        Memory at e9000000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at e8000000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Express Endpoint IRQ 0
        Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
        Capabilities: [100] Advanced Error Reporting

05:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE]
        Subsystem: ATI Technologies Inc Unknown device 1b61
        Flags: bus master, fast devsel, latency 0
        Memory at e9010000 (32-bit, non-prefetchable) [disabled] [size=64K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Express Endpoint IRQ 0


  And here is a snippet from my Xorg.0.log...

(II) Primary Device is: PCI 05:00:0
(--) Assigning device section with no busID to primary device
(WW) RADEON: No matching Device section for instance (BusID PCI:5:0:1) found
(--) Chipset ATI Radeon X300 (RV370) 5B60 (PCIE) found

  Can I improve performance with minor adjustments (i.e. no propietary
modules)?

-- 
Walter Dnes <waltdnes@waltdnes.org> In linux /sbin/init is Job #1
My musings on technology and security at http://tech_sec.blog.ca
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] lspci shows 2 entries for video card?

[Hemmann, Volker Armin]

On Sunday 19 February 2006 05:27, Walter Dnes wrote:
>   I'm trying to see if I can tweak things a little bit.  Here are the
> last 2 entries from the output of "lspci -v"...

IIRC this ati cards have to chips, so it is normal to have to entries in 
lspci.
-- 
gentoo-user@gentoo.org mailing list