On (02/01/06 15:29), Michael Sullivan wrote:
> On Mon, 2006-01-02 at 21:55 +0000, Rumen Yotov wrote:
> > Hi,
> > On (02/01/06 13:21), Michael Sullivan wrote:
> > > On Mon, 2006-01-02 at 21:01 +0000, Rumen Yotov wrote:
> > > > Hi,
> > > > On (02/01/06 12:30), Michael Sullivan wrote:
> > > > > On Mon, 2006-01-02 at 20:17 +0000, Rumen Yotov wrote:
> > > > > > Hi,
> > > > > > On (02/01/06 11:21), Michael Sullivan wrote:
> > > > > > > On Sun, 2006-01-01 at 17:47 -0800, Bob Sanders wrote:
> > > > > > > > On Sun, 01 Jan 2006 16:57:32 -0600
> > > > > > > > Michael Sullivan <michael@espersunited.com> wrote:
> > > > > > > > 
> > > > > > > > 
> > > > > > > > > > 
> > > > ...SKIP...
> > > > > > >...SKIP... 
> > > > > > > 
> > > > > > > #
> > > > > > > # Ftape, the floppy tape device driver
> > > > > > > #
> > > > > > > # CONFIG_AGP is not set
> > > > > > ==============^ switch this to ON plus the entry for your motherboard chips support.
> > > > > 
...SKIP...
> > > 00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL
> > > Express Chipset Family Graphics Controller
> > ==================================================================^
> > > camille ~ # lspci | grep -i video
> > > 05:00.0 Multimedia video controller: Internext Compression Inc iTVC16
> > > (CX23416) MPEG-2 Encoder (rev 01)
> > > 
...SKIP...
> > > 
> > So seems you have an Intel-910/915 video controler (i don't have Intel).
> > So switch CONFIG_AGP=ON and afterwards enable Intel-910 ot similar video controler.
> > Could do a: "genkernel --menuconfig --install all" - this will use your old config
> > display a text-driven menu for kernel config and after exiting will compile&install
> > (in /boot) your new kernel&modules.
> > If you wish backup the old one before that.
> > HTH.Rumen
> 
> Earlier this afternoon I compiled and booted a new kernel with
> CONFIG_AGP=y, but now when I run "genkernel --menuconfig all" I can't
> find anything that even hints at being "Intel-=910" or "video
> controller".  Where would it be at? 
> 
> -- 
> gentoo-user@gentoo.org mailing list
> 
Hi,
The chipset support is right below CONFIG_AGP setting.
...
Character devices --->
	/dev/agpgart (AGP support)
		Inter chipset ...
...
There's only one option for Intel chipset support (from 810-I915).
If made as modules put the appropriate entries in /etc/modules.autoload.d/kernel-2.6
PS:could check the genkernel guide too.
HTH.Rumen