* [gentoo-user] smartctl contradicting itself?
@ 2005-10-08 0:59 maxim wexler
0 siblings, 0 replies; only message in thread
From: maxim wexler @ 2005-10-08 0:59 UTC (permalink / raw
To: gentoo-user
Hello everybody,
As a follow up to the thread subj: is harddrive kaput?
the cable is fine.
All the smartctl selftests return w/ no error. But
#smartctl -l error /dev/hdb
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
Warning: ATA error count 94 inconsistent with error
log pointer 5
ATA Error Count: 94 (device log contains only the most
recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed
as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710
days.
Error 94 occurred at disk power-on lifetime: 1425
hours (59 days + 9 hours)
When the command that caused the error occurred, the
device was in an unknown$
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA =
0x00000000 = 0
Commands leading to the command that caused the
error were:
CR FR SC SN CL CH DH DC Powered_Up_Time
Command/Feature_Name
-- -- -- -- -- -- -- -- ----------------
--------------------
c8 00 08 00 00 00 f0 08 00:05:07.920 READ DMA
c8 00 08 00 00 00 f0 08 00:05:07.840 READ DMA
10 00 3f 00 00 00 f0 08 00:05:07.824
RECALIBRATE [OBS-4]
c8 00 08 00 00 00 f0 08 00:05:07.760 READ DMA
c8 00 08 00 00 00 f0 08 00:05:07.696 READ DMA
Error 93 occurred at disk power-on lifetime: 1425
hours (59 days + 9 hours)
When the command that caused the error occurred, the
device was in an unknown$
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA =
0x00000000 = 0
Commands leading to the command that caused the
error were:
CR FR SC SN CL CH DH DC Powered_Up_Time
Command/Feature_Name
-- -- -- -- -- -- -- -- ----------------
--------------------
c8 00 08 00 00 00 f0 08 00:05:07.840 READ DMA
10 00 3f 00 00 00 f0 08 00:05:07.824
RECALIBRATE [OBS-4]
c8 00 08 00 00 00 f0 08 00:05:07.760 READ DMA
c8 00 08 00 00 00 f0 08 00:05:07.696 READ DMA
c8 00 08 00 00 00 f0 08 00:05:07.616 READ DMA
Error 92 occurred at disk power-on lifetime: 1425
hours (59 days + 9 hours)
When the command that caused the error occurred, the
device was in an unknown$
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA =
0x00000000 = 0
Commands leading to the command that caused the
error were:
CR FR SC SN CL CH DH DC Powered_Up_Time
Command/Feature_Name
-- -- -- -- -- -- -- -- ----------------
--------------------
c8 00 08 00 00 00 f0 08 00:05:07.760 READ DMA
c8 00 08 00 00 00 f0 08 00:05:07.696 READ DMA
c8 00 08 00 00 00 f0 08 00:05:07.616 READ DMA
10 00 3f 00 00 00 f0 08 00:05:07.584
RECALIBRATE [OBS-4]
91 00 3f 3f ff 3f ff 08 00:05:07.584
INITIALIZE DEVICE PARAMETERS [OBS-$
Error 91 occurred at disk power-on lifetime: 1425
hours (59 days + 9 hours)
When the command that caused the error occurred, the
device was in an unknown$
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA =
0x00000000 = 0
Commands leading to the command that caused the
error were:
CR FR SC SN CL CH DH DC Powered_Up_Time
Command/Feature_Name
-- -- -- -- -- -- -- -- ----------------
--------------------
c8 00 08 00 00 00 f0 08 00:05:07.696 READ DMA
c8 00 08 00 00 00 f0 08 00:05:07.616 READ DMA
10 00 3f 00 00 00 f0 08 00:05:07.584
RECALIBRATE [OBS-4]
91 00 3f 3f ff 3f ff 08 00:05:07.584
INITIALIZE DEVICE PARAMETERS [OBS-$
ef 03 44 00 00 00 f0 0e 00:05:07.552 SET
FEATURES [Set transfer mode]
Error 90 occurred at disk power-on lifetime: 1425
hours (59 days + 9 hours)
When the command that caused the error occurred, the
device was in an unknown$
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA =
0x00000000 = 0
Commands leading to the command that caused the
error were:
CR FR SC SN CL CH DH DC Powered_Up_Time
Command/Feature_Name
-- -- -- -- -- -- -- -- ----------------
--------------------
c8 00 08 00 00 00 f0 08 00:05:07.616 READ DMA
10 00 3f 00 00 00 f0 08 00:05:07.584
RECALIBRATE [OBS-4]
91 00 3f 3f ff 3f ff 08 00:05:07.584
INITIALIZE DEVICE PARAMETERS [OBS-$
ef 03 44 00 00 00 f0 0e 00:05:07.552 SET
FEATURES [Set transfer mode]
ef 03 44 00 00 00 f0 0a 00:05:07.552 SET
FEATURES [Set transfer mode]
Can somebody explain this discrepancy and are there
four errors here or just one repeated four times?
What's my next move?
-mw
__________________________________
Yahoo! Music Unlimited
Access over 1 million songs. Try it free.
http://music.yahoo.com/unlimited/
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-10-08 1:03 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-10-08 0:59 [gentoo-user] smartctl contradicting itself? maxim wexler
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox