From: "Mauro Sauco" <mauro@sauco.net>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] cdrecord-prodvd extrange behaivor
Date: Wed, 28 Sep 2005 00:25:46 +0900 [thread overview]
Message-ID: <20050927152500.M33738@sauco.net> (raw)
In-Reply-To: <433962D1.4060607@planet.nl>
On Tue, 27 Sep 2005 17:18:41 +0200, Holly Bostick wrote
> Jason Stubbs schreef:
> > As I said, it doesn't seem like it's misinterpreting from the output
>
> Actually, it seems to me that it is, from the output:
>
> > Track 01: 4444 of 4444 MB written (fifo 100%). Track 01: Total bytes
> > read/written: 4660250624/4660250624 (2275513 sectors). Writing time:
> > 101.814s Fixating... WARNING: Some drives don't like fixation in
> > dummy mode.
Sorry, I mistakenly pasted the stdout from one of the times that I ran it with
-dummy.
I've just tried the suggestion from wong again, but same behavior,
#cdrecord dev=0,0,0 speed=1 -v -eject -dao -data
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J\uffffrg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.5.33
Using libscg version 'bero-0.5a'
cdrecord: Warning: using inofficial version of libscg (bero-0.5a
'@(#)scsitransp.c 1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling').
atapi: 1
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'PIONEER '
Identifikation : 'DVD-RW DVR-110 '
Revision : '1.22'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1024000 = 1000 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 4444 MB
Total size: 5104 MB (505:40.17) = 2275513 sectors
Lout start: 5104 MB (505:42/13) = 2275513 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 22983
Starting to write CD/DVD at speed 1 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is OFF.
Performing OPC...
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Starting new track at sector: 0
Track 01: 3139 of 4444 MB written (fifo 6%).cdrecord: fifo had 51856 puts
and 51848 gets.
cdrecord: fifo was 611 times empty and 432 times full, min fill was 0%.
--
gentoo-user@gentoo.org mailing list
next prev parent reply other threads:[~2005-09-27 15:33 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-27 14:29 [gentoo-user] cdrecord-prodvd extrange behaivor Mauro Sauco
2005-09-27 15:02 ` Willie Wong
2005-09-27 15:06 ` Jason Stubbs
2005-09-27 15:18 ` Holly Bostick
2005-09-27 15:25 ` Mauro Sauco [this message]
2005-09-27 15:59 ` Mauro Sauco
2005-09-27 16:31 ` Uwe Thiem
2005-09-27 16:42 ` Patrick Börjesson
2005-09-27 16:49 ` Mauro Sauco
2005-09-27 16:35 ` Uwe Thiem
2005-09-27 17:01 ` Mauro Sauco
2005-09-27 16:27 ` Uwe Thiem
2005-09-27 16:17 ` Uwe Thiem
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050927152500.M33738@sauco.net \
--to=mauro@sauco.net \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox