Re: Re: [gentoo-user] Adaptec AIC7xxx kernel problems?

Re: Re: [gentoo-user] Adaptec AIC7xxx kernel problems?

[brettholcomb]

I was afraid of that <G>.  There is a bug with rmmod causing crashing in Bugzilla. What puzzles me is these two systems have never had any problem at all - I even did a make oldconfig with the 2.6.11 .config so they would be the same.

> 
> From: Volker Armin Hemmann <volker.armin.hemmann@tu-clausthal.de>
> Date: 2005/08/31 Wed PM 10:34:59 EDT
> To: gentoo-user@lists.gentoo.org
> Subject: Re: [gentoo-user] Adaptec AIC7xxx kernel problems?
> 
> On Thursday 01 September 2005 04:13, Brett I. Holcomb wrote:
> > I'm wondering if it's just me or is anyone else having problems.  I am
> > running 2.6.11-r6 with no problems on a system with an Adaptec 39160 card.
> > I tried to go to 2.6.12-r6 and r9 but kept getting kernel panics on boot.
> > I have another system I'm installing Gentoo on that has an Adaptec 2940uw
> > on and since I was using 2005.0 it had 2.6.12 on it and would not boot.  I
> > found that on both systems if I build the aic7xxx as a module I can get
> > further in the boot process.  I also tried 2005.1 but that is a disaster
> > on both systems.  I tell it to noload=aic7xxx and it loads it anyway which
> > results in system not running.
> >
> > Is it just me <G>.
> 
> it have to ;)
> 
> I have an adaptec 2944 card and it works without problems (just did a big 
> restore through it with an 2.6.12-gentoo* kernel). At least none while 
> booting ;)
> -- 
> gentoo-user@gentoo.org mailing list
> 
> 

-- 
gentoo-user@gentoo.org mailing list

Re: Re: [gentoo-user] Adaptec AIC7xxx kernel problems?

[brettholcomb]

I tried 2.6.12-r9 which was released a short time ago.  I'm in the process of trying the old driver.
> 
> From: Dirk Heinrichs <ext-dirk.heinrichs@nokia.com>
> Date: 2005/09/01 Thu AM 02:05:46 EDT
> To: gentoo-user@lists.gentoo.org
> Subject: Re: [gentoo-user] Adaptec AIC7xxx kernel problems?
> 
> 

-- 
gentoo-user@gentoo.org mailing list