Re: [gentoo-user] NE module, modprobe, etc.

[Paul M Foster <paulf@quillandmouse.com>]

On Mon, Aug 08, 2005 at 06:39:09AM +0800, William Kenworthy wrote:

> You will also need the irq (irq=5) - may have to pull the card and check
> the jumpers, who load doze and see if it finds it if dual booted.
> 
> This link gives some more info:
> http://clarkconnect.com/wiki/index.php?title=ISA_Network_Cards
> 

The IRQ is not needed on the ne driver unless you have more than one ne 
card in the machine.

Paul


> 
> On Sun, 2005-08-07 at 18:17 -0400, Paul M Foster wrote:
> > I've got an older machine whose NIC uses the ne module. When I run
> > generate-modprobe.conf, I get the following two lines (among others) in
> > my modprobe.conf:
> >
> > alias ne off
> > install eth0 /bin/true
> >
> > If I change the one line to:
> >
> > alias eth0 ne
> >
> > and add this line:
> >
> > options ne io=0x330
> 
> 
> --
> gentoo-user@gentoo.org mailing list
-- 
gentoo-user@gentoo.org mailing list