[gentoo-user] System doesn't finish booting. Gentoo took a crap on my face.

[gentoo-user] System doesn't finish booting. Gentoo took a crap on my face.

[Daevid Vincent]

UGH. I did an "emerge -Davu world" yesterday on my notebook (Dell i8200),
and everything went fine. I did the etc-updates afterwards. I even stopped
X-windows and started again and it launched just fine. I worked the rest of
the day and halted as usual. Today when I turned on my notebook my startup
doesn't complete?!

I don't have networking (net.eth0 or net.ath0) on by default because for
whatever lame-ass reason, if there is no network available or plugged in,
Gentoo isn't smart enough (like RedHat or WindowsXP) to just continue on...
Anyways, the point being I can't ssh in.

The screen looks a bit different today too... I run frame-buffer 1600x1200,
so at the top is the normal colorized:

* Setting system clock to hardware clock [Local Time]...
[ OK ]

But then after that line, they look like this, but in only gray:

* Starting service hdparm
* Starting service pcmcia
						[ !! ]

* FAILED to start service pcmcia!
* Starting service keymaps
* Starting service bootmisc
...
Notice how they don't have the [ OK ] on the far right edge like all the
ones above this point, and they USED to be that way yesterday. The only
bracketted indicatiors are the [ !! ] ones and there are only a few: I8k
service, lisa service, and nntpd -- nothing that is critical to boot.

There are about 40 more lines of "* Starting/Service blah" and it gets all
the way down to:
...
* Service aumix started OK
* Service postfix started OK
* Service coldplug started OK
* Service shorewall started OK

Then that's it. No login prompt. If I switch VTs, I just have a blinking
cursor at the top.

I can only CTRL+ALT+DEL and that does a reboot.

My kernel is the same I've used for many months: 2.6.10-r6

I've gone into grub via the menu and taken off all kernel parameters not
needed to boot. Still no joy. I did notice that the [ !! ] is lined on the
far right of the screen. I'm guessing that's the 80 column point. I also
added 'single' to kernel boot string in grub, but that didn't help.

Looking through the services starting up, there is one called "* Starting
service rmnologin"

So. I'm fscked at the moment. Ideas?


-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] System doesn't finish booting. Gentoo took a crap on my face.

[Andrew Gaydenko]

Probably http://bugs.gentoo.org/show_bug.cgi?id=99691

======= On Friday 22 July 2005 01:16, Daevid Vincent wrote: =======
UGH. I did an "emerge -Davu world" yesterday on my notebook (Dell i8200),
and everything went fine. I did the etc-updates afterwards. I even stopped
X-windows and started again and it launched just fine. I worked the rest of
the day and halted as usual. Today when I turned on my notebook my startup
doesn't complete?!

I don't have networking (net.eth0 or net.ath0) on by default because for
whatever lame-ass reason, if there is no network available or plugged in,
Gentoo isn't smart enough (like RedHat or WindowsXP) to just continue on...
Anyways, the point being I can't ssh in.

The screen looks a bit different today too... I run frame-buffer 1600x1200,
so at the top is the normal colorized:

* Setting system clock to hardware clock [Local Time]...
[ OK ]

But then after that line, they look like this, but in only gray:

* Starting service hdparm
* Starting service pcmcia
						[ !! ]

* FAILED to start service pcmcia!
* Starting service keymaps
* Starting service bootmisc
...
Notice how they don't have the [ OK ] on the far right edge like all the
ones above this point, and they USED to be that way yesterday. The only
bracketted indicatiors are the [ !! ] ones and there are only a few: I8k
service, lisa service, and nntpd -- nothing that is critical to boot.

There are about 40 more lines of "* Starting/Service blah" and it gets all
the way down to:
...
* Service aumix started OK
* Service postfix started OK
* Service coldplug started OK
* Service shorewall started OK

Then that's it. No login prompt. If I switch VTs, I just have a blinking
cursor at the top.

I can only CTRL+ALT+DEL and that does a reboot.

My kernel is the same I've used for many months: 2.6.10-r6

I've gone into grub via the menu and taken off all kernel parameters not
needed to boot. Still no joy. I did notice that the [ !! ] is lined on the
far right of the screen. I'm guessing that's the 80 column point. I also
added 'single' to kernel boot string in grub, but that didn't help.

Looking through the services starting up, there is one called "* Starting
service rmnologin"

So. I'm fscked at the moment. Ideas?


-- 
gentoo-user@gentoo.org mailing list

-- 
gentoo-user@gentoo.org mailing list

RE: [gentoo-user] System doesn't finish booting. Gentoo took a crap on my face. [SOLVED]

[Daevid Vincent]

Bless you my son. That was the solution. 

I had "baselayout ~x86" in my /etc/portage/package.keywords file, so that's
how I got this broken version. How it got there in the first place is a bit
uncertain, but it has been commented out.

Thank your Andrew!
 
> Probably http://bugs.gentoo.org/show_bug.cgi?id=99691
> 
> ======= On Friday 22 July 2005 01:16, Daevid Vincent wrote: =======
> UGH. I did an "emerge -Davu world" yesterday on my notebook 
> (Dell i8200),
> and everything went fine. I did the etc-updates afterwards. I 
> even stopped
> X-windows and started again and it launched just fine. I 
> worked the rest of
> the day and halted as usual. Today when I turned on my 
> notebook my startup
> doesn't complete?!
> 
> I don't have networking (net.eth0 or net.ath0) on by default 
> because for
> whatever lame-ass reason, if there is no network available or 
> plugged in,
> Gentoo isn't smart enough (like RedHat or WindowsXP) to just 
> continue on...
> Anyways, the point being I can't ssh in.
> 
> The screen looks a bit different today too... I run 
> frame-buffer 1600x1200,
> so at the top is the normal colorized:
> 
> * Setting system clock to hardware clock [Local Time]...
> [ OK ]
> 
> But then after that line, they look like this, but in only gray:
> 
> * Starting service hdparm
> * Starting service pcmcia
> 						[ !! ]
> 
> * FAILED to start service pcmcia!
> * Starting service keymaps
> * Starting service bootmisc
> ...
> Notice how they don't have the [ OK ] on the far right edge 
> like all the
> ones above this point, and they USED to be that way 
> yesterday. The only
> bracketted indicatiors are the [ !! ] ones and there are only 
> a few: I8k
> service, lisa service, and nntpd -- nothing that is critical to boot.
> 
> There are about 40 more lines of "* Starting/Service blah" 
> and it gets all
> the way down to:
> ...
> * Service aumix started OK
> * Service postfix started OK
> * Service coldplug started OK
> * Service shorewall started OK
> 
> Then that's it. No login prompt. If I switch VTs, I just have 
> a blinking
> cursor at the top.
> 
> I can only CTRL+ALT+DEL and that does a reboot.
> 
> My kernel is the same I've used for many months: 2.6.10-r6
> 
> I've gone into grub via the menu and taken off all kernel 
> parameters not
> needed to boot. Still no joy. I did notice that the [ !! ] is 
> lined on the
> far right of the screen. I'm guessing that's the 80 column 
> point. I also
> added 'single' to kernel boot string in grub, but that didn't help.
> 
> Looking through the services starting up, there is one called 
> "* Starting
> service rmnologin"
> 
> So. I'm fscked at the moment. Ideas?
> 
> 
> -- 
> gentoo-user@gentoo.org mailing list
> 
> -- 
> gentoo-user@gentoo.org mailing list
> 
> 

-- 
gentoo-user@gentoo.org mailing list