Re: [gentoo-user] P4P800 - Intel ICH5R - data recovery?

[Patrick Rutkowski <rutski89@gmail.com>]

On Tuesday 19 July 2005 19:37, José Pedro Saraiva wrote:
> Thanks for the reply Colin =)
>
> > If you remember your stripe size, then you should be able to plug
> > your drives into any ICH5R-based motherboard and get your data back.
> > Theoretically, you could plug your drives into any RAID whose BIOS
> > does not write to the disks when creating an array and then recreate
> > the array in the BIOS with the same stripe size.  I don't know if
> > software RAID can rebuild your array, but that seems like your best
> > bet, lest you have a friend with a lot of SATA RAID controllers (s)
> > he's willing to lend out.
>
> I already ordered another ICH5R motherboard (similar to my P4P800 but
> a new model, since my old one is not available anymore) to try that
> out. I'm almost sure that my stripe size is 64KB (default). If so,
> plugging my hard drives into the new board and creating a new array
> with the same stripe size will give me access to my data? Or is there
> the risk of loosing it all? Do you know if the ICH5R writes to the
> disks when creating the array?
>
> > If all else fails and your data is priceless, grab a couple grand and
> > look into professional data recovery, because unless you can find a
> > super-geek, that will probably be your best bet.
>
> Unfortunately I cannot afford such a service, even though my data is
> crucial to me, they're just too expensive for my pocket. :-(
>
> José Pedro

My one BIG FAT WARNING to you would be to think for 30 seconds or more before 
pushing any buttons when redoing your disks.

Its very easy to accidentally format things when you don't know exactly what 
your doing... at least for me it is; I've done it :-p

Wishing the best of luck,
Patrick Rutkowski

-- 
gentoo-user@gentoo.org mailing list