* [gentoo-user] portage problems
@ 2004-12-05 21:37 Luigi Pinna
2004-12-05 23:52 ` Bastian Balthazar Bux
0 siblings, 1 reply; 18+ messages in thread
From: Luigi Pinna @ 2004-12-05 21:37 UTC (permalink / raw
To: List Gentoo
[-- Attachment #1: Type: text/plain, Size: 696 bytes --]
When I use emerge -upD world I receive this output:
Barbara portage # emerge -upD world
These are the packages that I would merge, in order:
Calculating world dependencies ...done!
[blocks B ] sys-apps/sysvinit (from pkg
sys-apps/baselayout-1.9.4-r6)
I tried to remove this block but... It doesn't work!
Someone had the same problem? What must I do?
Another problems is a messagge after an emerge:
* Caching service dependencies ...
* Service 'postfix' already provide 'mta'!;
* Not adding service 'sendmail'...
I want to remove this messagge (I use postfix).
What must I do?
Thanks a lot,
Luigi
--
Public key gpg(0xE716D548) on http://keyserver.linux.it/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] portage problems
2004-12-05 21:37 [gentoo-user] portage problems Luigi Pinna
@ 2004-12-05 23:52 ` Bastian Balthazar Bux
2004-12-06 0:07 ` Luigi Pinna
0 siblings, 1 reply; 18+ messages in thread
From: Bastian Balthazar Bux @ 2004-12-05 23:52 UTC (permalink / raw
To: gentoo-user
Luigi Pinna wrote:
>When I use emerge -upD world I receive this output:
>Barbara portage # emerge -upD world
>
>These are the packages that I would merge, in order:
>
>Calculating world dependencies ...done!
>[blocks B ] sys-apps/sysvinit (from pkg
>sys-apps/baselayout-1.9.4-r6)
>
>
emerge -pv sys-apps/sysvinit sys-apps/baselayout
These are the packages that I would merge, in order:
Calculating dependencies ...done!
[ebuild R ] sys-apps/sysvinit-2.85-r1 -bootstrap -build (-selinux) 0 kB
[ebuild R ] sys-apps/baselayout-1.11.6-r1 -bootstrap -build -debug
-livecd -static (-uclibc) 0 kB
strange, it seems that it's a feasible thing, try to upgrade baselayout
before, 1.11.6-r1 is the last one and than emerge sysvinit, dont' try to
unmerge baselayout, it's not a good idea.
Keep attention upgrading baselayout, it modifies a lot of fundamentals
in /etc so you will need to loose a bit of time with etc-update or
dispatch-conf.
>I tried to remove this block but... It doesn't work!
>Someone had the same problem? What must I do?
>
>
>Another problems is a messagge after an emerge:
>* Caching service dependencies ...
> * Service 'postfix' already provide 'mta'!;
> * Not adding service 'sendmail'...
>I want to remove this messagge (I use postfix).
>What must I do?
>Thanks a lot,
>Luigi
>
>
try:
emerge --unmerge mail-mta/sendmail
ciao francesco
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] portage problems
2004-12-05 23:52 ` Bastian Balthazar Bux
@ 2004-12-06 0:07 ` Luigi Pinna
2004-12-06 0:46 ` Bastian Balthazar Bux
2004-12-06 0:46 ` Jason Stubbs
0 siblings, 2 replies; 18+ messages in thread
From: Luigi Pinna @ 2004-12-06 0:07 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 1647 bytes --]
Alle 00:52, lunedì 06 dicembre 2004, Bastian Balthazar Bux ha scritto:
> emerge -pv sys-apps/sysvinit sys-apps/baselayout
>
> These are the packages that I would merge, in order:
>
> Calculating dependencies ...done!
> [ebuild R ] sys-apps/sysvinit-2.85-r1 -bootstrap -build
> (-selinux) 0 kB [ebuild R ] sys-apps/baselayout-1.11.6-r1
> -bootstrap -build -debug -livecd -static (-uclibc) 0 kB
Barbara ~ # emerge -pv sys-apps/sysvinit sys-apps/baselayout
These are the packages that I would merge, in order:
Calculating dependencies ...done!
[blocks B ] sys-apps/sysvinit (from pkg
sys-apps/baselayout-1.9.4-r6)
[ebuild UD] sys-apps/sysvinit-2.83-r1 [2.85-r1] 88 kB
[ebuild R ] sys-apps/baselayout-1.9.4-r6 -bootstrap -build -debug
-livecd (-selinux) -static (-uclibc) 197 kB
> strange, it seems that it's a feasible thing, try to upgrade
> baselayout before, 1.11.6-r1 is the last one and than emerge
> sysvinit, dont' try to unmerge baselayout, it's not a good idea.
> Keep attention upgrading baselayout, it modifies a lot of
> fundamentals in /etc so you will need to loose a bit of time with
> etc-update or dispatch-conf.
The started when I updated mplayer with this command:
ACCEPT_KEYWORDS=~x86 emerge -uD mplayer
and it installed the new sysvinit too, now I can't remove yet this
block!
Any ticks?
> try:
> emerge --unmerge mail-mta/sendmail
>
Barbara ~ # emerge --unmerge mail-mta/sendmail
--- Couldn't find mail-mta/sendmail to unmerge.
>>> unmerge: No packages selected for removal.
--
Public key GPG(0xE716D548) on http://keyserver.linux.it/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] portage problems
2004-12-06 0:07 ` Luigi Pinna
@ 2004-12-06 0:46 ` Bastian Balthazar Bux
2004-12-06 0:46 ` Jason Stubbs
1 sibling, 0 replies; 18+ messages in thread
From: Bastian Balthazar Bux @ 2004-12-06 0:46 UTC (permalink / raw
To: gentoo-user
Luigi Pinna wrote:
>Alle 00:52, lunedì 06 dicembre 2004, Bastian Balthazar Bux ha scritto:
>
>
>
>>emerge -pv sys-apps/sysvinit sys-apps/baselayout
>>
>>These are the packages that I would merge, in order:
>>
>>Calculating dependencies ...done!
>>[ebuild R ] sys-apps/sysvinit-2.85-r1 -bootstrap -build
>>(-selinux) 0 kB [ebuild R ] sys-apps/baselayout-1.11.6-r1
>>-bootstrap -build -debug -livecd -static (-uclibc) 0 kB
>>
>>
>
>Barbara ~ # emerge -pv sys-apps/sysvinit sys-apps/baselayout
>
>These are the packages that I would merge, in order:
>
>Calculating dependencies ...done!
>[blocks B ] sys-apps/sysvinit (from pkg
>sys-apps/baselayout-1.9.4-r6)
>[ebuild UD] sys-apps/sysvinit-2.83-r1 [2.85-r1] 88 kB
>[ebuild R ] sys-apps/baselayout-1.9.4-r6 -bootstrap -build -debug
>-livecd (-selinux) -static (-uclibc) 197 kB
>
>
>
Sorry for all not italian people I made a mistake and it's easyer for me
explain it in italian:
Mi sono spiegato male, intendevo dire di fare prima l'aggiornamento di
sys-apps/baselayout e solo *dopo* emergere sysvinit, forse e' questo che
ti blocca.
L' idea mi e' venuta vedendo che se provo a emergere entrambi i
pacchetti sui miei sistemi non mi viene segnalato alcune errore.
Se anche questo non funziona prova a fare un
emerge --sync
od ad aggiornare portage.
>
>
>>strange, it seems that it's a feasible thing, try to upgrade
>>baselayout before, 1.11.6-r1 is the last one and than emerge
>>sysvinit, dont' try to unmerge baselayout, it's not a good idea.
>>Keep attention upgrading baselayout, it modifies a lot of
>>fundamentals in /etc so you will need to loose a bit of time with
>>etc-update or dispatch-conf.
>>
>>
>
>The started when I updated mplayer with this command:
>ACCEPT_KEYWORDS=~x86 emerge -uD mplayer
>and it installed the new sysvinit too, now I can't remove yet this
>block!
>Any ticks?
>
>
>
>
English again
Older version of portage had a cache of virtual ebuilds installed keeped
on disk, newer portage (>= 2.51 I think) should generate it on demand.
virtual is the gentoo way to keep track of what ebuild is installed and
provide a certain functionality.
Maybe there is something dirty in your /var/lib/portage/world file that
keep track of your installed ebuilds or in the case of an older package
in the virtual cache file.
My knowledge finish here sorry.
ciao francesco
>>try:
>>emerge --unmerge mail-mta/sendmail
>>
>>
>>
>
>Barbara ~ # emerge --unmerge mail-mta/sendmail
>
>--- Couldn't find mail-mta/sendmail to unmerge.
>
>
>
>>>>unmerge: No packages selected for removal.
>>>>
>>>>
>
>
>
>
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] portage problems
2004-12-06 0:07 ` Luigi Pinna
2004-12-06 0:46 ` Bastian Balthazar Bux
@ 2004-12-06 0:46 ` Jason Stubbs
2004-12-06 0:58 ` Luigi Pinna
1 sibling, 1 reply; 18+ messages in thread
From: Jason Stubbs @ 2004-12-06 0:46 UTC (permalink / raw
To: gentoo-user
On Monday 06 December 2004 09:07, Luigi Pinna wrote:
> Alle 00:52, lunedì 06 dicembre 2004, Bastian Balthazar Bux ha scritto:
> > emerge -pv sys-apps/sysvinit sys-apps/baselayout
> >
> > These are the packages that I would merge, in order:
> >
> > Calculating dependencies ...done!
> > [ebuild R ] sys-apps/sysvinit-2.85-r1 -bootstrap -build
> > (-selinux) 0 kB [ebuild R ] sys-apps/baselayout-1.11.6-r1
> > -bootstrap -build -debug -livecd -static (-uclibc) 0 kB
>
> Barbara ~ # emerge -pv sys-apps/sysvinit sys-apps/baselayout
>
> These are the packages that I would merge, in order:
>
> Calculating dependencies ...done!
> [blocks B ] sys-apps/sysvinit (from pkg
> sys-apps/baselayout-1.9.4-r6)
> [ebuild UD] sys-apps/sysvinit-2.83-r1 [2.85-r1] 88 kB
> [ebuild R ] sys-apps/baselayout-1.9.4-r6 -bootstrap -build -debug
> -livecd (-selinux) -static (-uclibc) 197 kB
>
> > strange, it seems that it's a feasible thing, try to upgrade
> > baselayout before, 1.11.6-r1 is the last one and than emerge
> > sysvinit, dont' try to unmerge baselayout, it's not a good idea.
> > Keep attention upgrading baselayout, it modifies a lot of
> > fundamentals in /etc so you will need to loose a bit of time with
> > etc-update or dispatch-conf.
>
> The started when I updated mplayer with this command:
> ACCEPT_KEYWORDS=~x86 emerge -uD mplayer
> and it installed the new sysvinit too, now I can't remove yet this
> block!
> Any ticks?
Very bad idea. ACCEPT_KEYWORDS can be very dangerous to use from the env.
Specific customisations via /etc/portage should be used instead.
To fix your blocking problem, first remerge baselayout and then unmerge
sysvinit.
Regards,
Jason Stubbs
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] portage problems
2004-12-06 0:46 ` Jason Stubbs
@ 2004-12-06 0:58 ` Luigi Pinna
2004-12-06 3:38 ` cdemarco
0 siblings, 1 reply; 18+ messages in thread
From: Luigi Pinna @ 2004-12-06 0:58 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 506 bytes --]
Alle 01:46, lunedì 06 dicembre 2004, Jason Stubbs ha scritto:
> Very bad idea. ACCEPT_KEYWORDS can be very dangerous to use from the
> env. Specific customisations via /etc/portage should be used instead.
>
> To fix your blocking problem, first remerge baselayout and then
> unmerge sysvinit.
>
> Regards,
> Jason Stubbs
unmerging sysvinit the block is not more here!
I can use the normal emerge commands now!
Thanks,
Luigi
--
Public key GPG(0xE716D548) on http://keyserver.linux.it/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] portage problems
2004-12-06 0:58 ` Luigi Pinna
@ 2004-12-06 3:38 ` cdemarco
2004-12-06 3:58 ` Jason Stubbs
0 siblings, 1 reply; 18+ messages in thread
From: cdemarco @ 2004-12-06 3:38 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 660 bytes --]
On Mon, Dec 06, 2004 at 01:58:00AM +0100, Luigi Pinna wrote:
> unmerging sysvinit the block is not more here!
Except that sysvinit contains init(3), which is required for boot.
Make sure you've got it with `which init' ... if not, you've got to
emerge sysvinit or else your box won't boot!
Search the forums, this is a fairly well-documented problem. I had to
manually downgrade a bunch of ebuilds to the "x86" versions before
everything was happy again.
--
% You are in a maze of twisty passages, all alike.
Christopher DeMarco <cdemarco@fastmail.fm>
PGP public key ID 0x2E76CF5C @ pgp.mit.edu
+6012 232 2106
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] portage problems
2004-12-06 3:38 ` cdemarco
@ 2004-12-06 3:58 ` Jason Stubbs
0 siblings, 0 replies; 18+ messages in thread
From: Jason Stubbs @ 2004-12-06 3:58 UTC (permalink / raw
To: gentoo-user
On Monday 06 December 2004 12:38, cdemarco@fastmail.fm wrote:
> On Mon, Dec 06, 2004 at 01:58:00AM +0100, Luigi Pinna wrote:
> > unmerging sysvinit the block is not more here!
>
> Except that sysvinit contains init(3), which is required for boot.
> Make sure you've got it with `which init' ... if not, you've got to
> emerge sysvinit or else your box won't boot!
Half wrong. sysvinit and <baselayout-1.11 both contain init(3). sysvinit
should not be used unless baselayout is upgraded to the testing version as
well. If init(3) is missing (which it shouldn't be if my instructions were
followed correctly) the solution is to reemerge baselayout.
Regards,
Jason Stubbs
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* [gentoo-user] portage problems
@ 2008-02-01 22:54 Carter, Dwayne
2008-02-01 23:03 ` Alan McKinnon
0 siblings, 1 reply; 18+ messages in thread
From: Carter, Dwayne @ 2008-02-01 22:54 UTC (permalink / raw
To: gentoo-user
I am trying to update a server that is running an old version of gentoo,
but I am running into some issue. Could someone assist me.
I try a portage-recovery with no luck.
Portage 2.1.1 (default-linux/x86/2006.1, gcc-3.3.2, glibc-2.3.2-r9,
2.4.25_pre7-gss-r3 i686)
=================================================================
System uname: 2.4.25_pre7-gss-r3 i686 Pentium III (Coppermine)
Gentoo Base System version 1.4.3.13
Last Sync: Fri, 01 Feb 2008 15:30:01 +0000
ccache version 2.4 [enabled]
app-admin/eselect-compiler: [Not Present]
app-shells/bash: 2.05b-r9
dev-java/java-config: [Not Present]
dev-lang/python: 2.3.3
dev-python/pycrypto: [Not Present]
dev-util/ccache: 2.4-r7
dev-util/confcache: [Not Present]
sys-apps/baselayout: 1.8.6.13
sys-apps/sandbox: 1.2.18.1-r2
sys-devel/autoconf: 2.61-r1
sys-devel/automake: 1.7.7, 1.10
sys-devel/binutils: 2.14.90.0.7-r4
sys-devel/gcc-config: 1.3.4
sys-devel/libtool: 1.4.3-r3
virtual/os-headers: 2.4.21
ACCEPT_KEYWORDS="x86"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-march=pentium3 -O2 -pipe -fomit-frame-pointer"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/env.d /etc/gconf"
CXXFLAGS="-march=pentium3 -O2 -pipe -fomit-frame-pointer"
DISTDIR="/usr/portage/distfiles"
FEATURES="autoaddcvs ccache distlocks metadata-transfer sandbox sfperms
strict"
GENTOO_MIRRORS="http://distfiles.gentoo.org
http://distro.ibiblio.org/pub/linux/distributions/gentoo"
LINGUAS=""
MAKEOPTS="-j3"
PKGDIR="/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times
--compress --force --whole-file --delete --delete-after --stats
--timeout=180 --exclude='/distfiles' --exclude='/local'
--exclude='/packages'"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="x86 alsa_cards_ali5451 alsa_cards_als4000 alsa_cards_atiixp
alsa_cards_atiixp-modem alsa_cards_bt87x alsa_cards_ca0106
alsa_cards_cmipci alsa_cards_emu10k1 alsa_cards_emu10k1x
alsa_cards_ens1370 alsa_cards_ens1371 alsa_cards_es1938
alsa_cards_es1968 alsa_cards_fm801 alsa_cards_hda-intel
alsa_cards_intel8x0 alsa_cards_intel8x0m alsa_cards_maestro3
alsa_cards_trident alsa_cards_usb-audio alsa_cards_via82xx
alsa_cards_via82xx-modem alsa_cards_ymfpci alsa_pcm_plugins_adpcm
alsa_pcm_plugins_alaw alsa_pcm_plugins_asym alsa_pcm_plugins_copy
alsa_pcm_plugins_dmix alsa_pcm_plugins_dshare alsa_pcm_plugins_dsnoop
alsa_pcm_plugins_empty alsa_pcm_plugins_extplug alsa_pcm_plugins_file
alsa_pcm_plugins_hooks alsa_pcm_plugins_iec958 alsa_pcm_plugins_ioplug
alsa_pcm_plugins_ladspa alsa_pcm_plugins_lfloat alsa_pcm_plugins_linear
alsa_pcm_plugins_meter alsa_pcm_plugins_mulaw alsa_pcm_plugins_multi
alsa_pcm_plugins_null alsa_pcm_plugins_plug alsa_pcm_plugins_rate
alsa_pcm_plugins_route alsa_pcm_plugins_share alsa_pcm_plugins_shm
alsa_pcm_plugins_softvol apache2_modules_actions apache2_modules_alias
apache2_modules_auth_basic apache2_modules_authn_alias
apache2_modules_authn_anon apache2_modules_authn_dbm
apache2_modules_authn_default apache2_modules_authn_file
apache2_modules_authz_dbm apache2_modules_authz_default
apache2_modules_authz_groupfile apache2_modules_authz_host
apache2_modules_authz_owner apache2_modules_authz_user
apache2_modules_autoindex apache2_modules_cache apache2_modules_dav
apache2_modules_dav_fs apache2_modules_dav_lock apache2_modules_deflate
apache2_modules_dir apache2_modules_disk_cache apache2_modules_env
apache2_modules_expires apache2_modules_ext_filter
apache2_modules_file_cache apache2_modules_filter
apache2_modules_headers apache2_modules_include apache2_modules_info
apache2_modules_log_config apache2_modules_logio
apache2_modules_mem_cache apache2_modules_mime
apache2_modules_mime_magic apache2_modules_negotiation
apache2_modules_rewrite apache2_modules_setenvif apache2_modules_speling
apache2_modules_status apache2_modules_unique_id apache2_modules_userdir
apache2_modules_usertrack apache2_modules_vhost_alias berkdb
bitmap-fonts cli cracklib crypt cups dri elibc_glibc fortran gdbm gpm
iconv input_devices_evdev input_devices_keyboard input_devices_mouse
ipv6 isdnlog kernel_linux lcd_devices_bayrad lcd_devices_cfontz
lcd_devices_cfontz633 lcd_devices_glk lcd_devices_hd44780
lcd_devices_lb216 lcd_devices_lcdm001 lcd_devices_mtxorb
lcd_devices_ncurses lcd_devices_text midi mmx mudflap ncurses nls nptl
nptlonly openmp pam pcre perl ppds pppd python readline reflection
session spl sse ssl tcpd truetype-fonts type1-fonts unicode userland_GNU
video_cards_apm video_cards_ark video_cards_chips video_cards_cirrus
video_cards_cyrix video_cards_dummy video_cards_fbdev video_cards_glint
video_cards_i128 video_cards_i740 video_cards_i810 video_cards_imstt
video_cards_mach64 video_cards_mga video_cards_neomagic video_cards_nsc
video_cards_nv video_cards_r128 video_cards_radeon video_cards_rendition
video_cards_s3 video_cards_s3virge video_cards_savage
video_cards_siliconmotion video_cards_sis video_cards_sisusb
video_cards_tdfx video_cards_tga video_cards_trident video_cards_tseng
video_cards_v4l video_cards_vesa video_cards_vga video_cards_via
video_cards_vmware video_cards_voodoo xorg zlib"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG,
LC_ALL, LDFLAGS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS,
PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY
witney packages #
Calculating dependencies... done!
!!! Error: the <dev-lang/python-2.3.6-r2 package conflicts with another
package;
!!! the two packages cannot be installed on the same system
together.
!!! Please use 'emerge --pretend' to determine blockers.
For more information about Blocked Packages, please refer to the
following
section of the Gentoo Linux x86 Handbook (architecture is irrelevant):
http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?full=1#blocked
Thanks in advance:
Dwayne
--
gentoo-user@lists.gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] portage problems
2008-02-01 22:54 Carter, Dwayne
@ 2008-02-01 23:03 ` Alan McKinnon
2008-02-02 6:02 ` Carter, Dwayne
0 siblings, 1 reply; 18+ messages in thread
From: Alan McKinnon @ 2008-02-01 23:03 UTC (permalink / raw
To: gentoo-user
On Saturday 02 February 2008, Carter, Dwayne wrote:
> Calculating dependencies... done!
>
> !!! Error: the <dev-lang/python-2.3.6-r2 package conflicts with
> another package;
> !!! the two packages cannot be installed on the same system
> together.
> !!! Please use 'emerge --pretend' to determine blockers.
^^^^^^^^^
See this? Do it. Post output.
--
Alan McKinnon
alan dot mckinnon at gmail dot com
--
gentoo-user@lists.gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* RE: [gentoo-user] portage problems
2008-02-01 23:03 ` Alan McKinnon
@ 2008-02-02 6:02 ` Carter, Dwayne
2008-02-02 8:05 ` Dale
2008-02-02 10:20 ` Daniel Pielmeier
0 siblings, 2 replies; 18+ messages in thread
From: Carter, Dwayne @ 2008-02-02 6:02 UTC (permalink / raw
To: gentoo-user
> See this? Do it. Post output.
Oops! I forgot to post that.
witney root # emerge --pretend -u world
These are the packages that would be merged, in order:
Calculating world dependencies |
!!! Problems have been detected with your world file
!!! Please run emaint --check world
!!! Ebuilds for the following packages are either all
!!! masked or don't exist:
sys-kernel/gs-sources app-editors/vi
... done!
[blocks B ] <dev-lang/python-2.3.6-r2 (is blocking app-admin/python-updater-0.2)
[blocks B ] sys-apps/pam-login (is blocking sys-apps/shadow-4.0.18.1-r1)
[blocks B ] <net-misc/dhcpcd-2.0.0 (is blocking sys-apps/baselayout-1.12.10-r5)
[blocks B ] sys-apps/modutils (is blocking sys-apps/module-init-tools-3.4)
[ebuild N ] sys-libs/gpm-1.20.1-r6 USE="(-selinux)"
[ebuild U ] sys-libs/ncurses-5.6-r2 [5.3-r5] USE="gpm%* unicode%* -bootstrap% -build% -doc% -minimal% -nocxx% -profile% -trace%"
[ebuild U ] app-shells/bash-3.2_p17-r1 [2.05b-r9] USE="-afs% -bashlogger% -plugins% -vanilla%"
[ebuild U ] sys-libs/readline-5.2_p7 [4.3-r4]
[ebuild U ] sys-libs/zlib-1.2.3-r1 [1.1.4-r2]
[ebuild N ] dev-libs/libxml2-2.6.30-r1 USE="ipv6 python readline -debug -doc -test"
[ebuild N ] virtual/libiconv-0
[ebuild U ] dev-libs/expat-2.0.1 [1.95.6-r1]
[ebuild U ] sys-devel/gettext-0.17 [0.12.1] USE="openmp%* -acl% -doc% -emacs% -nocxx%"
[ebuild U ] sys-apps/findutils-4.3.11 [4.1.20-r1] USE="-static%"
[ebuild N ] sys-devel/binutils-config-1.9-r4
[ebuild U ] sys-devel/gnuconfig-20070724 [20030708]
[ebuild U ] sys-devel/binutils-2.18-r1 [2.14.90.0.7-r4] USE="-multislot% -multitarget% -test% -vanilla%"
[ebuild NS ] sys-libs/db-4.5.20_p2 USE="-bootstrap -doc -java -nocxx -tcl -test"
[ebuild N ] sys-libs/gdbm-1.8.3-r3 USE="berkdb"
[ebuild U ] sys-devel/libperl-5.8.8-r1 [5.8.2] USE="gdbm* -debug% -ithreads%"
[ebuild U ] dev-lang/perl-5.8.8-r4 [5.8.2-r1] USE="gdbm* -build% -debug% -ithreads% -perlsuid%"
[ebuild N ] dev-perl/Locale-gettext-1.05
[ebuild U ] sys-apps/help2man-1.36.4 [1.29] USE="nls%*"
[ebuild NS ] sys-devel/libtool-1.5.24 USE="-vanilla"
[ebuild U ] sys-apps/groff-1.19.2-r1 [1.18.1-r4]
[ebuild U ] sys-apps/man-1.6e-r3 [1.5l-r6]
[ebuild U ] sys-apps/man-pages-2.76 [1.65] USE="nls%*"
[ebuild U ] sys-apps/diffutils-2.8.7-r2 [2.8.4-r4]
[ebuild U ] dev-libs/openssl-0.9.8g [0.9.7c-r1] USE="zlib%* -bindist% -emacs% -gmp% -kerberos% -sse2% -test%"
[ebuild NS ] dev-lang/python-2.4.4-r6 USE="berkdb gdbm ipv6 ncurses readline ssl -bootstrap -build -doc -examples -nocxx -nothreads -tk -ucs2"
[ebuild N ] perl-core/Test-Harness-2.64
[ebuild N ] app-admin/perl-cleaner-1.04.3
[ebuild N ] perl-core/PodParser-1.35
[ebuild U ] sys-apps/debianutils-2.28.2 [1.16.7-r4]
[ebuild N ] sys-apps/mktemp-1.5
[ebuild N ] app-misc/ca-certificates-20070303-r1
[ebuild U ] dev-python/python-fchksum-1.7.1 [1.6.1-r1]
[ebuild N ] app-admin/python-updater-0.2
[ebuild N ] app-misc/pax-utils-0.1.16 USE="-caps"
[ebuild U ] sys-apps/sed-4.1.5 [4.0.7]
[ebuild U ] sys-apps/portage-2.1.3.19 [2.0.51-r3] USE="-doc% -epydoc%" LINGUAS="-pl%"
*** Portage will stop merging at this point and reload itself,
then resume the merge.
[ebuild U ] dev-libs/popt-1.10.7 [1.7-r1]
[ebuild U ] net-misc/rsync-2.6.9-r5 [2.6.0] USE="ipv6%* -acl% -static% -xinetd%"
[ebuild U ] sys-apps/coreutils-6.9-r1 [5.0.91-r4] USE="-acl* -xattr%"
[ebuild N ] dev-python/pycrypto-2.0.1-r6 USE="-bindist -gmp -test"
[ebuild U ] sys-devel/flex-2.5.33-r3 [2.5.4a-r5] USE="nls%* -static%"
[ebuild U ] sys-devel/bc-1.06-r6 [1.06-r5] USE="-static%"
[ebuild N ] sys-libs/com_err-1.40.4 USE="nls"
[ebuild N ] sys-libs/ss-1.40.4 USE="nls"
[ebuild U ] sys-fs/e2fsprogs-1.40.4 [1.34]
[ebuild N ] dev-util/unifdef-1.20
[ebuild U ] sys-kernel/linux-headers-2.6.23-r3 [2.4.21]
[ebuild U ] sys-apps/util-linux-2.13-r2 [2.12-r4] USE="crypt* -old-linux%"
[ebuild N ] dev-util/pkgconfig-0.22 USE="-hardened"
[ebuild N ] dev-libs/libpcre-7.4 USE="unicode -doc"
[ebuild U ] sys-apps/grep-2.5.1a-r1 [2.5.1-r1] USE="pcre%* -static%"
[ebuild U ] app-arch/gzip-1.3.12 [1.3.3-r2] USE="-pic% -static%"
[ebuild U ] dev-perl/perltidy-20070508 [20031021]
[ebuild U ] sys-libs/cracklib-2.8.10 [2.7-r8] USE="nls%* python%*"
[ebuild U ] sys-libs/pam-0.99.9.0 [0.77] USE="cracklib%* nls%* -audit% -test% -vim-syntax%"
[ebuild N ] sys-libs/timezone-data-2007j USE="nls"
[ebuild U ] sys-devel/gcc-config-1.4.0-r4 [1.3.4]
[ebuild U ] dev-libs/gmp-4.2.2 [4.1.2] USE="-doc% -nocxx%"
[ebuild N ] dev-libs/mpfr-2.3.0_p4
[ebuild U ] sys-devel/bison-2.3 [1.875]
[ebuild NS ] sys-devel/gcc-4.1.2 USE="fortran mudflap nls (-altivec) -bootstrap -build -d -doc -gcj -gtk (-hardened) -ip28 -ip32r10k (-multilib) -multislot (-n32) (-n64) -nocxx -objc -objc++ -objc-gc -test -vanilla"
[ebuild U ] sys-libs/glibc-2.6.1 [2.3.2-r9] USE="-debug% -gd% -glibc-omitfp% (-hardened) (-multilib) -profile% (-selinux) -vanilla%"
[ebuild U ] net-mail/mailbase-1 [0.00-r5] USE="pam%*"
[ebuild U ] mail-mta/ssmtp-2.61-r2 [2.60.7] USE="ipv6* -mailwrapper%"
[ebuild U ] sys-process/cronbase-0.3.2-r1 [0.2.1-r3]
[ebuild U ] sys-process/vixie-cron-4.1-r10 [3.0.1-r4] USE="pam%* -debug%"
[ebuild U ] sys-apps/net-tools-1.60-r13 [1.60-r7]
[ebuild U ] sys-apps/kbd-1.13-r1 [1.08-r5]
[ebuild U ] net-misc/iputils-20070202 [020927] USE="ipv6%* -doc%"
[ebuild N ] sys-apps/busybox-1.8.2 USE="pam -debug -make-symlinks -savedconfig (-selinux) -static"
[ebuild U ] sys-process/procps-3.2.7 [3.1.15] USE="(-n32)"
[ebuild U ] dev-util/strace-4.5.16 [4.5.7] USE="-aio%"
[ebuild U ] sys-apps/gawk-3.1.5-r5 [3.1.3-r1]
[ebuild U ] app-arch/tar-1.19-r1 [1.13.25-r3]
[ebuild U ] sys-apps/shadow-4.0.18.1-r1 [4.0.3-r9] USE="cracklib%* nls%* -nousuid% -skey%"
[ebuild U ] sys-process/psmisc-22.5-r2 [21.2-r4] USE="ipv6%* -X%"
[ebuild U ] net-misc/clockspeed-0.62-r4 [0.62-r3]
[ebuild U ] sys-apps/modutils-2.4.27-r1 [2.4.25]
[ebuild U ] sys-apps/file-4.21-r1 [4.06] USE="python%*"
[ebuild U ] app-arch/bzip2-1.0.4-r1 [1.0.2-r3]
[ebuild U ] sys-boot/grub-0.97-r3 [0.94-r1] USE="-custom-cflags% -netboot%"
[ebuild U ] app-admin/sysstat-8.0.3 [5.0.5-r1]
[ebuild U ] app-editors/nano-2.0.7 [1.2.2] USE="ncurses%* unicode%* -minimal%"
[ebuild U ] net-misc/netkit-telnetd-0.17-r8 [0.17-r3]
[ebuild U ] app-arch/cpio-2.9-r1 [2.5] USE="nls%*"
[ebuild U ] sys-devel/make-3.81 [3.80]
[ebuild U ] sys-apps/hdparm-7.7 [5.4]
[ebuild N ] sys-apps/sysvinit-2.86-r10 USE="(-ibm) (-selinux) -static"
[ebuild N ] virtual/init-0
[ebuild U ] sys-apps/baselayout-1.12.10-r5 [1.8.6.13] USE="unicode%* -bootstrap*"
[ebuild N ] sys-apps/module-init-tools-3.4 USE="-old-linux"
[ebuild U ] net-misc/openssh-4.7_p1-r3 [3.7.1_p2-r1] USE="-X% -chroot% -hpn% -ldap% -libedit% -smartcard%"
[ebuild N ] sys-fs/udev-115-r1 USE="(-selinux)"
[ebuild N ] dev-libs/eventlog-0.2.5
[ebuild NS ] dev-libs/glib-2.14.5 USE="-debug -doc -hardened"
[ebuild U ] app-admin/syslog-ng-2.0.6 [1.6.0_rc3-r1] USE="ipv6%* -hardened% (-selinux) -spoof-source% -static%"
[ebuild U ] net-misc/wget-1.10.2 [1.9-r2] USE="-build%"
[ebuild U ] sys-process/daemontools-0.76-r5 [0.76-r3] USE="-doc% -static%"
[ebuild U ] sys-apps/less-416 [381] USE="unicode%*"
[ebuild U ] app-portage/gentoolkit-0.2.3-r1 [0.2.0]
[ebuild U ] sys-apps/ucspi-tcp-0.88-r16 [0.88-r5] USE="-doc%"
[ebuild U ] app-antivirus/clamav-0.92 [0.70] USE="nls%* -bzip2% -mailwrapper% (-selinux)"
Dwayne Carter
-----Original Message-----
From: Alan McKinnon [mailto:alan.mckinnon@gmail.com]
Sent: Friday, February 01, 2008 6:04 PM
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] portage problems
On Saturday 02 February 2008, Carter, Dwayne wrote:
> Calculating dependencies... done!
>
> !!! Error: the <dev-lang/python-2.3.6-r2 package conflicts with
> another package;
> !!! the two packages cannot be installed on the same system
> together.
> !!! Please use 'emerge --pretend' to determine blockers.
^^^^^^^^^
See this? Do it. Post output.
--
Alan McKinnon
alan dot mckinnon at gmail dot com
--
gentoo-user@lists.gentoo.org mailing list
--
gentoo-user@lists.gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] portage problems
2008-02-02 6:02 ` Carter, Dwayne
@ 2008-02-02 8:05 ` Dale
2008-02-02 8:55 ` Alan McKinnon
2008-02-02 21:02 ` Carter, Dwayne
2008-02-02 10:20 ` Daniel Pielmeier
1 sibling, 2 replies; 18+ messages in thread
From: Dale @ 2008-02-02 8:05 UTC (permalink / raw
To: gentoo-user
Carter, Dwayne wrote:
> << SNIP >>
> [blocks B ] <dev-lang/python-2.3.6-r2 (is blocking app-admin/python-updater-0.2)
>
> [blocks B ] sys-apps/pam-login (is blocking sys-apps/shadow-4.0.18.1-r1)
> [blocks B ] <net-misc/dhcpcd-2.0.0 (is blocking sys-apps/baselayout-1.12.10-r5)
> [blocks B ] sys-apps/modutils (is blocking sys-apps/module-init-tools-3.4)
> << SNIP >>
Normally I would say unmerge the blocks and emerge the blockers and
update them first. However, I'm not sure about that pam-login one. If
you do unmerge that one, do NOT logout until you have it updated. I
would recommend switching to another console and logging in to make sure
it works too.
> [ebuild U ] dev-libs/expat-2.0.1 [1.95.6-r1]
Oh no, is that the one I think it is. You may want to search the forums
for the expat update. Let me know if you can't find it. Has it been a
while since you updated?
Maybe someone else will see something else and chime in.
Dale
:-) :-)
--
gentoo-user@lists.gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] portage problems
2008-02-02 8:05 ` Dale
@ 2008-02-02 8:55 ` Alan McKinnon
2008-02-02 21:02 ` Carter, Dwayne
1 sibling, 0 replies; 18+ messages in thread
From: Alan McKinnon @ 2008-02-02 8:55 UTC (permalink / raw
To: gentoo-user
On Saturday 02 February 2008, Dale wrote:
> Carter, Dwayne wrote:
> > << SNIP >>
> > [blocks B ] <dev-lang/python-2.3.6-r2 (is blocking
> > app-admin/python-updater-0.2)
> >
> > [blocks B ] sys-apps/pam-login (is blocking
> > sys-apps/shadow-4.0.18.1-r1) [blocks B ] <net-misc/dhcpcd-2.0.0
> > (is blocking sys-apps/baselayout-1.12.10-r5) [blocks B ]
> > sys-apps/modutils (is blocking sys-apps/module-init-tools-3.4) <<
> > SNIP >>
>
> Normally I would say unmerge the blocks and emerge the blockers and
> update them first. However, I'm not sure about that pam-login one.
> If you do unmerge that one, do NOT logout until you have it updated.
> I would recommend switching to another console and logging in to make
> sure it works too.
>
> > [ebuild U ] dev-libs/expat-2.0.1 [1.95.6-r1]
>
> Oh no, is that the one I think it is. You may want to search the
> forums for the expat update. Let me know if you can't find it. Has
> it been a while since you updated?
Yes, Dale is correct.
Dwayne, you have all the major updates from the past year hitting your
box in one go, and they all have to be approached in specific sequence.
The general idea is of course to unmerge the blockers and merge the
things that replace them.
I would handle pam first. Keep a root console or two open, find the
howto or wiki page that tells you how to do this step and do just that
one (i.e. don't try and do it along with everything else in world). Get
this one working, then handle the python-updater in the same way (btw,
your version of python - 2.3 - is now unmaintained and will be leaving
the tree soon).
Finally do the expat upgrade. Now this is the big one and there is a
complete howto/wiki page that tells you how to do it. This one will
take a long time, as half your system will use the old version of expat
and you will only have a new one (!) Use revdep-rebuild to fix that,
preferably overnight.
Finally, you have two packages that are not in portage anymore:
gs-sources
vi
I don't know what gs-sources were for, you should switch to a supported
set of kernel sources.
The vi ebuild has been replace with app-editors/vim, so do:
emerge -C vi ; emerge vim
To fix this.
When was this box last updated? 2005 sometime?
--
Alan McKinnon
alan dot mckinnon at gmail dot com
--
gentoo-user@lists.gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] portage problems
2008-02-02 6:02 ` Carter, Dwayne
2008-02-02 8:05 ` Dale
@ 2008-02-02 10:20 ` Daniel Pielmeier
2008-02-02 14:28 ` Alan McKinnon
1 sibling, 1 reply; 18+ messages in thread
From: Daniel Pielmeier @ 2008-02-02 10:20 UTC (permalink / raw
To: gentoo-user
Carter, Dwayne schrieb:
> [blocks B ] <dev-lang/python-2.3.6-r2 (is blocking app-admin/python-updater-0.2)
You also have to be careful with this blocker, never unmerge python or
you are lost as portage does not work without python. You have to do
something like this to get around it.
>> quickpkg =dev-lang/python-2.3.5
this makes a backup of your old python version in case something gets
wrong (adapt the version to match your currently installed one)
>> emerge --nodeps -avt =dev-lang/python-2.4.4-r6
installs the new python version without dependencies so the
python-updater can not block the old python version
>> emerge -avC =dev-lang/python-2.3.5
removes the old version of python
>> emerge -avt python-updater
installs python-updater
>> emerge -avt portage
reinstalls portage so it uses the new python version
It is also good thing to run python-updater after this.
Please could someone confirm this, as i have never done this myself,
just googling! :)
> !!! Problems have been detected with your world file
> !!! Please run emaint --check world
You should also consider this! There are some invalid entries in your
world file. Normally this are packages which are in world but are not
installed on the system.
Regards,
Daniel
--
gentoo-user@lists.gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] portage problems
2008-02-02 10:20 ` Daniel Pielmeier
@ 2008-02-02 14:28 ` Alan McKinnon
2008-02-02 14:55 ` Daniel Pielmeier
0 siblings, 1 reply; 18+ messages in thread
From: Alan McKinnon @ 2008-02-02 14:28 UTC (permalink / raw
To: gentoo-user
On Saturday 02 February 2008, Daniel Pielmeier wrote:
> > !!! Problems have been detected with your world file
> > !!! Please run emaint --check world
>
> You should also consider this! There are some invalid entries in your
> world file. Normally this are packages which are in world but are not
> installed on the system.
You mean "packages which are installed on the system but are not in
portage" surely?
--
Alan McKinnon
alan dot mckinnon at gmail dot com
--
gentoo-user@lists.gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] portage problems
2008-02-02 14:28 ` Alan McKinnon
@ 2008-02-02 14:55 ` Daniel Pielmeier
2008-02-02 15:14 ` Alan McKinnon
0 siblings, 1 reply; 18+ messages in thread
From: Daniel Pielmeier @ 2008-02-02 14:55 UTC (permalink / raw
To: gentoo-user
Alan McKinnon schrieb:
> On Saturday 02 February 2008, Daniel Pielmeier wrote:
>>> !!! Problems have been detected with your world file
>>> !!! Please run emaint --check world
>> You should also consider this! There are some invalid entries in your
>> world file. Normally this are packages which are in world but are not
>> installed on the system.
>
> You mean "packages which are installed on the system but are not in
> portage" surely?
>
No! This error occurs for instance when you have a package listed in the
world file but it is not installed.
Just test it and manually put some cat/some-pkg you have not installed
in the world file and run "emerge -pv world" then portage starts
complaining, although it would install the newly added entry with its
dependencies.
Emaint checks the world file for a few problems. For entries with
invalid atoms, entries with a package that is not installed (see above
example) and entries that have a category that is not listed in
/etc/portage/categories.
--
gentoo-user@lists.gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [gentoo-user] portage problems
2008-02-02 14:55 ` Daniel Pielmeier
@ 2008-02-02 15:14 ` Alan McKinnon
0 siblings, 0 replies; 18+ messages in thread
From: Alan McKinnon @ 2008-02-02 15:14 UTC (permalink / raw
To: gentoo-user
On Saturday 02 February 2008, Daniel Pielmeier wrote:
> Alan McKinnon schrieb:
> > On Saturday 02 February 2008, Daniel Pielmeier wrote:
> >> You should also consider this! There are some invalid entries in
> >> your world file. Normally this are packages which are in world but
> >> are not installed on the system.
> >
> > You mean "packages which are installed on the system but are not in
> > portage" surely?
>
> No! This error occurs for instance when you have a package listed in
> the world file but it is not installed.
OK, I see what you mean.
--
Alan McKinnon
alan dot mckinnon at gmail dot com
--
gentoo-user@lists.gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
* RE: [gentoo-user] portage problems
2008-02-02 8:05 ` Dale
2008-02-02 8:55 ` Alan McKinnon
@ 2008-02-02 21:02 ` Carter, Dwayne
1 sibling, 0 replies; 18+ messages in thread
From: Carter, Dwayne @ 2008-02-02 21:02 UTC (permalink / raw
To: gentoo-user
Dale:
Thanks for the input, I have successfully resolved the pam-login issue,
I have to adjusted all the /etc/pam.d entry to remove the pam_stack
entry and update them with "<type> include system-auth".
I just removed the dhcpcd-2.0.0 since it is not part of the system tree
anymore.
I am still working on the python and modutils. As far as updates I just
inherited this server at work so, I don't really know when it was last
updated.
Thanks for the great information and input.
Dwayne Carter
-----Original Message-----
From: Dale [mailto:dalek1967@bellsouth.net]
Sent: Saturday, February 02, 2008 3:06 AM
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] portage problems
Carter, Dwayne wrote:
> << SNIP >>
> [blocks B ] <dev-lang/python-2.3.6-r2 (is blocking
app-admin/python-updater-0.2)
>
> [blocks B ] sys-apps/pam-login (is blocking
sys-apps/shadow-4.0.18.1-r1)
> [blocks B ] <net-misc/dhcpcd-2.0.0 (is blocking
sys-apps/baselayout-1.12.10-r5)
> [blocks B ] sys-apps/modutils (is blocking
sys-apps/module-init-tools-3.4)
> << SNIP >>
Normally I would say unmerge the blocks and emerge the blockers and
update them first. However, I'm not sure about that pam-login one. If
you do unmerge that one, do NOT logout until you have it updated. I
would recommend switching to another console and logging in to make sure
it works too.
> [ebuild U ] dev-libs/expat-2.0.1 [1.95.6-r1]
Oh no, is that the one I think it is. You may want to search the forums
for the expat update. Let me know if you can't find it. Has it been a
while since you updated?
Maybe someone else will see something else and chime in.
Dale
:-) :-)
--
gentoo-user@lists.gentoo.org mailing list
--
gentoo-user@lists.gentoo.org mailing list
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2008-02-02 21:02 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-12-05 21:37 [gentoo-user] portage problems Luigi Pinna
2004-12-05 23:52 ` Bastian Balthazar Bux
2004-12-06 0:07 ` Luigi Pinna
2004-12-06 0:46 ` Bastian Balthazar Bux
2004-12-06 0:46 ` Jason Stubbs
2004-12-06 0:58 ` Luigi Pinna
2004-12-06 3:38 ` cdemarco
2004-12-06 3:58 ` Jason Stubbs
-- strict thread matches above, loose matches on Subject: below --
2008-02-01 22:54 Carter, Dwayne
2008-02-01 23:03 ` Alan McKinnon
2008-02-02 6:02 ` Carter, Dwayne
2008-02-02 8:05 ` Dale
2008-02-02 8:55 ` Alan McKinnon
2008-02-02 21:02 ` Carter, Dwayne
2008-02-02 10:20 ` Daniel Pielmeier
2008-02-02 14:28 ` Alan McKinnon
2008-02-02 14:55 ` Daniel Pielmeier
2008-02-02 15:14 ` Alan McKinnon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox