* [gentoo-user] Gentoo on Raspberry Pi 400?
@ 2020-12-07 11:11 Peter Humphrey
2020-12-07 23:30 ` Teru Yuu
0 siblings, 1 reply; 6+ messages in thread
From: Peter Humphrey @ 2020-12-07 11:11 UTC (permalink / raw
To: gentoo-user
Morning all,
I've just bought an rpi 400, which is a nice little machine, and I'm wondering
whether anyone has managed to install Gentoo on one. I've tried a couple of
bootable images for other models, but they can't boot. I get some debug output
but it means nothing to me.
According to this site, the 400's boot process differs from other models':
https://support.thepihut.com/hc/en-us/articles/360015131057-My-Raspberry-Pi-400-will-not-boot-is-faulty
Any ideas?
--
Regards,
Peter.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [gentoo-user] Gentoo on Raspberry Pi 400?
2020-12-07 11:11 [gentoo-user] Gentoo on Raspberry Pi 400? Peter Humphrey
@ 2020-12-07 23:30 ` Teru Yuu
2020-12-08 0:34 ` Neil Bothwick
0 siblings, 1 reply; 6+ messages in thread
From: Teru Yuu @ 2020-12-07 23:30 UTC (permalink / raw
To: gentoo-user
On Mon, Dec 07, 2020 at 11:11:52AM +0000, Peter Humphrey wrote:
>Morning all,
>
>I've just bought an rpi 400, which is a nice little machine, and I'm wondering
>whether anyone has managed to install Gentoo on one. I've tried a couple of
>bootable images for other models, but they can't boot. I get some debug output
>but it means nothing to me.
>
>According to this site, the 400's boot process differs from other models':
>
>https://support.thepihut.com/hc/en-us/articles/360015131057-My-Raspberry-Pi-400-will-not-boot-is-faulty
>
>Any ideas?
>
>--
>Regards,
>Peter.
As long as you boot into any system, you will be able to install gentoo.
For rpi4 I used alpine linux (mainly because it already had write-up
on wiki for headless boot with sshd enabled) and from there it was
fairly regular gentoo install (except for compiling toolchain on desktop
via crossdev to speed it up).
I even left bootloader that came in alpine tarball, just overwrote it
with gentoo kernel, initframs and changed cmdline config.
Give alpine a go as a boot medium, if that doesn't work you can always
use official raspbian instead, which is guaranteed to boot on Pi400.
Regards,
Teru
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [gentoo-user] Gentoo on Raspberry Pi 400?
2020-12-07 23:30 ` Teru Yuu
@ 2020-12-08 0:34 ` Neil Bothwick
2020-12-08 6:51 ` Andrew Lowe
2020-12-08 9:58 ` Peter Humphrey
0 siblings, 2 replies; 6+ messages in thread
From: Neil Bothwick @ 2020-12-08 0:34 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 518 bytes --]
On Tue, 8 Dec 2020 00:30:12 +0100, Teru Yuu wrote:
> As long as you boot into any system, you will be able to install gentoo.
> For rpi4 I used alpine linux (mainly because it already had write-up
> on wiki for headless boot with sshd enabled)
You can do that with Raspbian too. Mount the boot partition of the SD
card on your computer and create a file called ssh. Then Raspbian will
boot with SSH enabled.
--
Neil Bothwick
Voting Democrat or Republican is like choosing a cabin in the Titanic.
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [gentoo-user] Gentoo on Raspberry Pi 400?
2020-12-08 0:34 ` Neil Bothwick
@ 2020-12-08 6:51 ` Andrew Lowe
2020-12-08 9:55 ` Peter Humphrey
2020-12-08 9:58 ` Peter Humphrey
1 sibling, 1 reply; 6+ messages in thread
From: Andrew Lowe @ 2020-12-08 6:51 UTC (permalink / raw
To: gentoo-user
On 8/12/20 8:34 am, Neil Bothwick wrote:
> On Tue, 8 Dec 2020 00:30:12 +0100, Teru Yuu wrote:
>
>> As long as you boot into any system, you will be able to install gentoo.
>> For rpi4 I used alpine linux (mainly because it already had write-up
>> on wiki for headless boot with sshd enabled)
>
> You can do that with Raspbian too. Mount the boot partition of the SD
> card on your computer and create a file called ssh. Then Raspbian will
> boot with SSH enabled.
>
There is always this option:
https://github.com/sakaki-/gentoo-on-rpi-64bit
Andrew
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [gentoo-user] Gentoo on Raspberry Pi 400?
2020-12-08 6:51 ` Andrew Lowe
@ 2020-12-08 9:55 ` Peter Humphrey
0 siblings, 0 replies; 6+ messages in thread
From: Peter Humphrey @ 2020-12-08 9:55 UTC (permalink / raw
To: gentoo-user
On Tuesday, 8 December 2020 06:51:25 GMT Andrew Lowe wrote:
> There is always this option:
>
> https://github.com/sakaki-/gentoo-on-rpi-64bit
Nope. Tried that first. As I said, the boot process in Pi 400 differs from the
others.
--
Regards,
Peter.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [gentoo-user] Gentoo on Raspberry Pi 400?
2020-12-08 0:34 ` Neil Bothwick
2020-12-08 6:51 ` Andrew Lowe
@ 2020-12-08 9:58 ` Peter Humphrey
1 sibling, 0 replies; 6+ messages in thread
From: Peter Humphrey @ 2020-12-08 9:58 UTC (permalink / raw
To: gentoo-user
On Tuesday, 8 December 2020 00:34:53 GMT Neil Bothwick wrote:
> On Tue, 8 Dec 2020 00:30:12 +0100, Teru Yuu wrote:
> > As long as you boot into any system, you will be able to install gentoo.
> > For rpi4 I used alpine linux (mainly because it already had write-up
> > on wiki for headless boot with sshd enabled)
>
> You can do that with Raspbian too. Mount the boot partition of the SD
> card on your computer and create a file called ssh. Then Raspbian will
> boot with SSH enabled.
I'll try that - thanks!
--
Regards,
Peter.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-12-08 9:58 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-12-07 11:11 [gentoo-user] Gentoo on Raspberry Pi 400? Peter Humphrey
2020-12-07 23:30 ` Teru Yuu
2020-12-08 0:34 ` Neil Bothwick
2020-12-08 6:51 ` Andrew Lowe
2020-12-08 9:55 ` Peter Humphrey
2020-12-08 9:58 ` Peter Humphrey
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox