From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from pigeon.gentoo.org ([208.92.234.80] helo=lists.gentoo.org) by finch.gentoo.org with esmtp (Exim 4.60) (envelope-from ) id 1NR576-0007rJ-J6 for garchives@archives.gentoo.org; Sat, 02 Jan 2010 14:38:17 +0000 Received: from pigeon.gentoo.org (localhost [127.0.0.1]) by pigeon.gentoo.org (Postfix) with SMTP id F2370E06DC; Sat, 2 Jan 2010 14:37:27 +0000 (UTC) Received: from mail-yx0-f174.google.com (mail-yx0-f174.google.com [209.85.210.174]) by pigeon.gentoo.org (Postfix) with ESMTP id A1C6FE06DC for ; Sat, 2 Jan 2010 14:37:27 +0000 (UTC) Received: by yxe4 with SMTP id 4so11905135yxe.32 for ; Sat, 02 Jan 2010 06:37:27 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:subject:from:to:in-reply-to :references:content-type:date:message-id:mime-version:x-mailer :content-transfer-encoding; bh=iU2MYl4ek6WF8rBoA49yz/iymMshTUDvse82EHzTdAA=; b=gGvJUsuoCN8peS0miGSRMn7eV1aZsKd+WRhojk6yAK8r+SPCCGTMja7z2oTi4q4WbX 2hlHbKAaMWzVY4g4RoS+xLqJ9uqqYawNtuDUjLHROx4t7YfYN/ee0xiPh4WywGoSZTNh kELtIlwlrHCmu+3j0mUQsw9Sah8UAzCPWNtxA= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=subject:from:to:in-reply-to:references:content-type:date:message-id :mime-version:x-mailer:content-transfer-encoding; b=mGHtsxMOwEL7x3VBrBLW+8YArsQ+wSx8y+sUojcjOaQ38Ib1i63NmJnKiEfRgm1q+C sNTbxIJx7ywVSEYyJ1XcwWhgh7nSTtgpHblXMvBV5GX85HTmFY7H2757uyaMNnZ6nHp7 iR19fNkVk0hSJH/hEzl0xA12CCbzLDmO+kejU= Received: by 10.101.160.12 with SMTP id m12mr6908157ano.69.1262443046996; Sat, 02 Jan 2010 06:37:26 -0800 (PST) Received: from ?192.168.1.3? (adsl-64-149-63-75.dsl.tul2ok.sbcglobal.net [64.149.63.75]) by mx.google.com with ESMTPS id 20sm15741939iwn.1.2010.01.02.06.37.24 (version=SSLv3 cipher=RC4-MD5); Sat, 02 Jan 2010 06:37:25 -0800 (PST) Subject: Re: [gentoo-user] Re: Externel drive should be /dev/sda1, but /dev/sda1 does not exist [SOLVED somehow] From: Michael Sullivan To: gentoo-user@lists.gentoo.org In-Reply-To: <1262442919.26846.69.camel@camille.espersunited.com> References: <1262353732.26846.60.camel@camille.espersunited.com> <1262442919.26846.69.camel@camille.espersunited.com> Content-Type: text/plain Date: Sat, 02 Jan 2010 08:37:23 -0600 Message-Id: <1262443043.26846.71.camel@camille.espersunited.com> Precedence: bulk List-Post: List-Help: List-Unsubscribe: List-Subscribe: List-Id: Gentoo Linux mail X-BeenThere: gentoo-user@lists.gentoo.org Reply-to: gentoo-user@lists.gentoo.org Mime-Version: 1.0 X-Mailer: Evolution 2.26.3 Content-Transfer-Encoding: 7bit X-Archives-Salt: d34f14f3-b642-4537-86cb-c2e4c1e10b30 X-Archives-Hash: ead0ae6c193aab0987691846ff1f6fca I guess I should have checked before I sent that last post because now /dev/sda is there. Now, how do I make it be there when I first boot into Linux? On Sat, 2010-01-02 at 08:35 -0600, Michael Sullivan wrote: > On Fri, 2010-01-01 at 11:37 -0800, walt wrote: > > On 01/01/2010 05:48 AM, Michael Sullivan wrote: > > > Hello > > > > > > My wife's computer is pretty slow, so I've attached and old hard drive > > > into a hard drive enclosure and hooked it into her USB port for > > > additional swap space. It used to work. The swap space is supposed to > > > be /dev/sda1. The problem is that for some reason when I rebooted this > > > morning with a new kernel, /dev/sda does not exist anymore... > > > > Hm. So the only thing you changed was the new kernel? Might help to > > know why you built the new kernel. What problem were you solving by > > doing it? > > > OK here goes. I built the new kernel because with the old one /dev/sda > didn't seem to exist when I know it should. And besides, there was a > newer kernel marked as stable and aren't we always supposed to use the > newest stable kernel for security reasons, unless there's something that > we need done that the new kernel doesn't do? > > > I would try booting the machine without the USB swap disk and then > > hotplug it when the machine is already running. What does dmesg say > > then? Can be simpler to interpret when you know exactly which lines > > were printed in response to the newly connected drive. > > > I rebooted the machine with the drive unplugged and ran dmesg: > > catherine ~ # cat dmesg.txt > Initializing cgroup subsys cpuset > Linux version 2.6.31-gentoo-r6 (root@catherine) (gcc version 4.3.4 > (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP Thu Dec 31 19:13:07 CST 2009 > KERNEL supported cpus: > Intel GenuineIntel > AMD AuthenticAMD > NSC Geode by NSC > Cyrix CyrixInstead > Centaur CentaurHauls > Transmeta GenuineTMx86 > Transmeta TransmetaCPU > UMC UMC UMC UMC > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000000dff0000 (usable) > BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS) > BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data) > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) > DMI 2.2 present. > Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. > e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> > (reserved) > last_pfn = 0xdff0 max_arch_pfn = 0x100000 > MTRR default type: uncachable > MTRR fixed ranges enabled: > 00000-9FFFF write-back > A0000-BFFFF uncachable > C0000-C7FFF write-protect > C8000-EFFFF uncachable > F0000-FFFFF write-protect > MTRR variable ranges enabled: > 0 base 000000000 mask FF0000000 write-back > 1 base 00E000000 mask FFE000000 uncachable > 2 base 0D0000000 mask FF8000000 write-combining > 3 disabled > 4 disabled > 5 disabled > 6 disabled > 7 disabled > initial memory mapped : 0 - 00800000 > init_memory_mapping: 0000000000000000-000000000dff0000 > 0000000000 - 0000400000 page 4k > 0000400000 - 000dc00000 page 2M > 000dc00000 - 000dff0000 page 4k > kernel direct mapping tables up to dff0000 @ 10000-15000 > RAMDISK: 0dcc5000 - 0dfdf8aa > ACPI: RSDP 000f7170 00014 (v00 AWARD ) > ACPI: RSDT 0dff3000 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) > ACPI: FACP 0dff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) > ACPI: DSDT 0dff30c0 038FA (v01 AWARD AWRDACPI 00001000 MSFT 0100000E) > ACPI: FACS 0dff0000 00040 > ACPI: APIC 0dff69c0 0005A (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) > ACPI: Local APIC address 0xfee00000 > 0MB HIGHMEM available. > 223MB LOWMEM available. > mapped low ram: 0 - 0dff0000 > low ram: 0 - 0dff0000 > node 0 low ram: 00000000 - 0dff0000 > node 0 bootmap 00011000 - 00012c00 > (9 early reservations) ==> bootmem [0000000000 - 000dff0000] > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - > 0000001000] > #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - > 0000002000] > #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - > 0000007000] > #3 [0000100000 - 0000637f00] TEXT DATA BSS ==> [0000100000 - > 0000637f00] > #4 [000dcc5000 - 000dfdf8aa] RAMDISK ==> [000dcc5000 - > 000dfdf8aa] > #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - > 0000100000] > #6 [0000638000 - 000063a06a] BRK ==> [0000638000 - > 000063a06a] > #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - > 0000011000] > #8 [0000011000 - 0000013000] BOOTMAP ==> [0000011000 - > 0000013000] > found SMP MP-table at [c00f57a0] f57a0 > Zone PFN ranges: > DMA 0x00000010 -> 0x00001000 > Normal 0x00001000 -> 0x0000dff0 > HighMem 0x0000dff0 -> 0x0000dff0 > Movable zone start PFN for each node > early_node_map[2] active PFN ranges > 0: 0x00000010 -> 0x0000009f > 0: 0x00000100 -> 0x0000dff0 > On node 0 totalpages: 57215 > free_area_init_node: node 0, pgdat c0561da0, node_mem_map c1000200 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 3951 pages, LIFO batch:0 > Normal zone: 416 pages used for memmap > Normal zone: 52816 pages, LIFO batch:15 > Using APIC driver default > ACPI: PM-Timer IO Port: 0x1008 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > Using ACPI (MADT) for SMP configuration information > SMP: Allowing 1 CPUs, 0 hotplug CPUs > nr_irqs_gsi: 24 > PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 > PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 > Allocating PCI resources starting at e000000 (gap: e000000:f0c00000) > NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 > PERCPU: Embedded 15 pages at c11c2000, static data 38684 bytes > Built 1 zonelists in Zone order, mobility grouping on. Total pages: > 56767 > Kernel command line: real_root=/dev/hdc6 udev > PID hash table entries: 1024 (order: 10, 4096 bytes) > Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) > Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > Initializing HighMem for node 0 (00000000:00000000) > Memory: 218040k/229312k available (3005k kernel code, 10620k reserved, > 1508k data, 428k init, 0k highmem) > virtual kernel memory layout: > fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) > pkmap : 0xff800000 - 0xffc00000 (4096 kB) > vmalloc : 0xce7f0000 - 0xff7fe000 ( 784 MB) > lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB) > .init : 0xc0569000 - 0xc05d4000 ( 428 kB) > .data : 0xc03ef6c0 - 0xc05688a8 (1508 kB) > .text : 0xc0100000 - 0xc03ef6c0 (3005 kB) > Checking if this processor honours the WP bit even in supervisor > mode...Ok. > Hierarchical RCU implementation. > NR_IRQS:512 > CPU 0 irqstacks, hard=c11c2000 soft=c11c3000 > Fast TSC calibration using PIT > Detected 1662.338 MHz processor. > Console: colour VGA+ 80x25 > console [tty0] enabled > Calibrating delay loop (skipped), value calculated using timer > frequency.. 3324.67 BogoMIPS (lpj=16623380) > Security Framework initialized > Mount-cache hash table entries: 512 > Initializing cgroup subsys ns > Initializing cgroup subsys cpuacct > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 256K (64 bytes/line) > mce: CPU supports 4 MCE banks > Performance Counters: AMD PMU driver. > ... version: 0 > ... bit width: 48 > ... generic counters: 4 > ... value mask: 0000ffffffffffff > ... max period: 00007fffffffffff > ... fixed-purpose counters: 0 > ... counter mask: 000000000000000f > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > Freeing SMP alternatives: 25k freed > ACPI: Core revision 20090521 > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > CPU0: AMD Sempron(tm) 2400+ stepping 01 > Brought up 1 CPUs > Total of 1 processors activated (3324.67 BogoMIPS). > CPU0 attaching NULL sched-domain. > Booting paravirtualized kernel on bare hardware > xor: automatically using best checksumming function: pIII_sse > pIII_sse : 4598.000 MB/sec > xor: using function: pIII_sse (4598.000 MB/sec) > NET: Registered protocol family 16 > ACPI: bus type pci registered > dca service started, version 1.8 > PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1 > bio: create slab at 0 > ACPI: EC: Look up EC in DSDT > ACPI: Interpreter enabled > ACPI: (supports S0 S1 S4 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: No dock devices found. > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] > pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] > pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] > pci 0000:00:02.5: reg 18 io port: [0x170-0x177] > pci 0000:00:02.5: reg 1c io port: [0x374-0x377] > pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f] > pci 0000:00:02.5: PME# supported from D3cold > pci 0000:00:02.5: PME# disabled > pci 0000:00:02.7: reg 10 io port: [0xe000-0xe0ff] > pci 0000:00:02.7: reg 14 io port: [0xe400-0xe47f] > pci 0000:00:02.7: supports D1 D2 > pci 0000:00:02.7: PME# supported from D3hot D3cold > pci 0000:00:02.7: PME# disabled > pci 0000:00:03.0: reg 10 32bit mmio: [0xe1104000-0xe1104fff] > pci 0000:00:03.1: reg 10 32bit mmio: [0xe1100000-0xe1100fff] > pci 0000:00:03.2: reg 10 32bit mmio: [0xe1101000-0xe1101fff] > pci 0000:00:03.3: reg 10 32bit mmio: [0xe1102000-0xe1102fff] > pci 0000:00:03.3: PME# supported from D0 D3hot D3cold > pci 0000:00:03.3: PME# disabled > pci 0000:00:04.0: reg 10 io port: [0xe800-0xe8ff] > pci 0000:00:04.0: reg 14 32bit mmio: [0xe1103000-0xe1103fff] > pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff] > pci 0000:00:04.0: supports D1 D2 > pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:04.0: PME# disabled > pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff] > pci 0000:01:00.0: reg 14 32bit mmio: [0xe1000000-0xe101ffff] > pci 0000:01:00.0: reg 18 io port: [0xd000-0xd07f] > pci 0000:01:00.0: supports D1 D2 > pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] > pci 0000:00:01.0: bridge 32bit mmio: [0xe1000000-0xe10fffff] > pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff] > pci_bus 0000:00: on NUMA node 0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) > SCSI subsystem initialized > libata version 3.00 loaded. > raid6: int32x1 433 MB/s > raid6: int32x2 652 MB/s > raid6: int32x4 573 MB/s > raid6: int32x8 458 MB/s > raid6: mmxx1 1356 MB/s > raid6: mmxx2 2433 MB/s > raid6: sse1x1 1276 MB/s > raid6: sse1x2 2020 MB/s > raid6: using algorithm sse1x2 (2020 MB/s) > PCI: Using ACPI for IRQ routing > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 12 devices > ACPI: ACPI bus type pnp unregistered > system 00:00: iomem range 0xc8000-0xcbfff has been reserved > system 00:00: iomem range 0xf0000-0xf7fff could not be reserved > system 00:00: iomem range 0xf8000-0xfbfff could not be reserved > system 00:00: iomem range 0xfc000-0xfffff could not be reserved > system 00:00: iomem range 0xdff0000-0xdffffff could not be reserved > system 00:00: iomem range 0xffff0000-0xffffffff has been reserved > system 00:00: iomem range 0x0-0x9ffff could not be reserved > system 00:00: iomem range 0x100000-0xdfeffff could not be reserved > system 00:00: iomem range 0xffee0000-0xffefffff has been reserved > system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved > system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved > system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved > system 00:02: ioport range 0x4d0-0x4d1 has been reserved > system 00:02: ioport range 0x800-0x805 has been reserved > system 00:02: ioport range 0x290-0x297 has been reserved > pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 > pci 0000:00:01.0: IO window: 0xd000-0xdfff > pci 0000:00:01.0: MEM window: 0xe1000000-0xe10fffff > pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff > pci_bus 0000:00: resource 0 io: [0x00-0xffff] > pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] > pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] > pci_bus 0000:01: resource 1 mem: [0xe1000000-0xe10fffff] > pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff] > NET: Registered protocol family 2 > IP route cache hash table entries: 2048 (order: 1, 8192 bytes) > TCP established hash table entries: 8192 (order: 4, 65536 bytes) > TCP bind hash table entries: 8192 (order: 4, 65536 bytes) > TCP: Hash tables configured (established 8192 bind 8192) > TCP reno registered > NET: Registered protocol family 1 > Trying to unpack rootfs image as initramfs... > Freeing initrd memory: 3178k freed > apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) > apm: overridden by ACPI. > audit: initializing netlink socket (disabled) > type=2000 audit(1262420890.810:1): initialized > HugeTLB registered 4 MB page size, pre-allocated 0 pages > VFS: Disk quotas dquot_6.5.2 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > squashfs: version 4.0 (2009/01/31) Phillip Lougher > msgmni has been set to 432 > alg: No test for stdrng (krng) > async_tx: api initialized (async) > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) > io scheduler noop registered > io scheduler anticipatory registered (default) > io scheduler deadline registered > io scheduler cfq registered > pci 0000:01:00.0: Boot video device > isapnp: Scanning for PnP cards... > Switched to high resolution mode on CPU 0 > isapnp: No Plug & Play device found > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > brd: module loaded > loop: module loaded > input: Macintosh mouse button emulation as /devices/virtual/input/input0 > Uniform Multi-Platform E-IDE driver > pci 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > sis5513 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller > sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0x01) > sis5513 0000:00:02.5: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x4000-0x4007 > ide1: BM-DMA at 0x4008-0x400f > Probing IDE interface ide0... > hda: LITE-ON COMBO SOHC-5236V, ATAPI CD/DVD-ROM drive > hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 > hda: UDMA/33 mode selected > Probing IDE interface ide1... > hdc: WDC WD800BB-00JHC0, ATA DISK drive > hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 > hdc: host side 80-wire cable detection failed, limiting max speed to > UDMA33 > hdc: UDMA/33 mode selected > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > ide_generic: please use "probe_mask=0x3f" module parameter for probing > all legacy ISA IDE ports > ide-gd driver 1.18 > hdc: max request size: 128KiB > hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63 > hdc: cache flushes supported > hdc: hdc1 hdc3 hdc4 < hdc5 hdc6 > > ide-cd driver 5.00 > ide-cd: hda: ATAPI 52X DVD-ROM CD-R/RW drive, 1536kB Cache > Uniform CD-ROM driver Revision: 3.20 > Loading iSCSI transport class v2.0-870. > iscsi: registered transport (tcp) > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > md: raid0 personality registered for level 0 > md: raid1 personality registered for level 1 > md: raid6 personality registered for level 6 > md: raid5 personality registered for level 5 > md: raid4 personality registered for level 4 > cpuidle: using governor ladder > TCP cubic registered > NET: Registered protocol family 17 > Using IPI No-Shortcut mode > registered taskstats version 1 > Freeing unused kernel memory: 428k freed > input: AT Translated Set 2 keyboard > as /devices/platform/i8042/serio0/input/input1 > input: ImPS/2 Generic Wheel Mouse > as /devices/platform/i8042/serio1/input/input2 > NCR53c406a: no available ports found > scsi: Detection failed (no card) > GDT-HA: Storage RAID Controller Driver. Version: 3.05 > qlogicfas: no cards were found, please specify I/O address and IRQ using > iobase= and irq= optionsFailed initialization of WD-7000 SCSI card! > NCR53c406a: no available ports found > imm: Version 2.05 (for Linux 2.4.0) > sym53c416.c: Version 1.0.0-ac > Fusion MPT base driver 3.04.10 > Copyright (c) 1999-2008 LSI Corporation > Fusion MPT SPI Host driver 3.04.10 > Fusion MPT FC Host driver 3.04.10 > Fusion MPT SAS Host driver 3.04.10 > 3ware Storage Controller device driver for Linux v1.26.02.002. > 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. > Compaq SMART2 Driver (v 2.6.0) > HP CISS Driver (v 3.6.20) > Adaptec aacraid driver 1.1-5[2461]-ms > megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) > megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) > megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 > QLogic Fibre Channel HBA Driver: 8.03.01-k4 > Emulex LightPulse Fibre Channel SCSI driver 8.3.3 > Copyright(c) 2004-2009 Emulex. All rights reserved. > aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 > ehci_hcd 0000:00:03.3: EHCI Host Controller > ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:03.3: cache line size of 64 is not supported > ehci_hcd 0000:00:03.3: irq 23, io mem 0xe1102000 > ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > Initializing USB Mass Storage driver... > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > uhci_hcd: USB Universal Host Controller Interface driver > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > ohci_hcd 0000:00:03.0: OHCI Host Controller > ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 > ohci_hcd 0000:00:03.0: irq 20, io mem 0xe1104000 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 3 ports detected > ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > ohci_hcd 0000:00:03.1: OHCI Host Controller > ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 > ohci_hcd 0000:00:03.1: irq 21, io mem 0xe1100000 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 3 ports detected > ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 > ohci_hcd 0000:00:03.2: OHCI Host Controller > ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 > ohci_hcd 0000:00:03.2: irq 22, io mem 0xe1101000 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > usbcore: registered new interface driver hiddev > usbcore: registered new interface driver usbhid > usbhid: v2.6:USB HID core driver > sl811: driver sl811-hcd, 19 May 2005 > device-mapper: uevent: version 1.0.3 > device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: > dm-devel@redhat.com > md: raid10 personality registered for level 10 > JFS: nTxBlock = 1733, nTxLock = 13867 > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > SGI XFS with ACLs, security attributes, realtime, large block/inode > numbers, no debug enabled > SGI XFS Quota Management subsystem > fuse init (API version 7.12) > Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI > Copyright (c) 1999-2006 Intel Corporation. > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with writeback data mode. > udev: starting version 146 > IT8705 SuperIO detected. > parport_pc 00:09: reported by Plug and Play ACPI > parport0: PC-style at 0x378 (0x778), irq 7, dma 3 > [PCSPP,TRISTATE,COMPAT,ECP,DMA] > FDC 0 is a post-1991 82077 > input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 > ACPI: Power Button [PWRF] > input: Power Button > as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 > ACPI: Power Button [PWRB] > input: Sleep Button > as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5 > ACPI: Sleep Button [FUTS] > Linux agpgart interface v0.103 > thermal LNXTHERM:01: registered as thermal_zone0 > ACPI: Thermal Zone [THRM] (40 C) > fan PNP0C0B:00: registered as cooling_device0 > ACPI: Fan [FAN] (on) > agpgart-sis 0000:00:00.0: SiS chipset [1039/0741] > agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 > processor LNXCPU:00: registered as cooling_device1 > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > input: PC Speaker as /devices/platform/pcspkr/input/input6 > shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > ppdev: user-space parallel port driver > Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > sis900.c: v1.08.10 Apr. 2 2006 > rtc_cmos 00:04: RTC can wake from S4 > rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one year, 242 bytes nvram > intel8x0_measure_ac97_clock: measured 59902 usecs (2881 samples) > intel8x0: clocking to 48000 > sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. > 0000:00:04.0: Using transceiver found at address 1 as default > eth0: SiS 900 PCI Fast Ethernet at 0xe800, IRQ 19, 00:11:5b:84:60:3b > EXT3 FS on hdc6, internal journal > lp0: using parport0 (interrupt-driven). > Adding 248968k swap on /dev/hdc5. Priority:-1 extents:1 across:248968k > eth0: Media Link On 100mbps full-duplex > warning: `named' uses 32-bit capabilities (legacy support in use) > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > ip_tables: (C) 2000-2006 Netfilter Core Team > nf_conntrack version 0.5.0 (3583 buckets, 14332 max) > CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use > nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option > or > sysctl net.netfilter.nf_conntrack_acct=1 to enable it. > Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > svc: failed to register lockdv1 RPC service (errno 97). > NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery > directory > NFSD: starting 90-second grace period > eth0: no IPv6 routers present > catherine ~ # > > and then plugged in: > > catherine ~ # cat dmesg-new.txt > Initializing cgroup subsys cpuset > Linux version 2.6.31-gentoo-r6 (root@catherine) (gcc version 4.3.4 > (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP Thu Dec 31 19:13:07 CST 2009 > KERNEL supported cpus: > Intel GenuineIntel > AMD AuthenticAMD > NSC Geode by NSC > Cyrix CyrixInstead > Centaur CentaurHauls > Transmeta GenuineTMx86 > Transmeta TransmetaCPU > UMC UMC UMC UMC > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000000dff0000 (usable) > BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS) > BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data) > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) > DMI 2.2 present. > Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. > e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> > (reserved) > last_pfn = 0xdff0 max_arch_pfn = 0x100000 > MTRR default type: uncachable > MTRR fixed ranges enabled: > 00000-9FFFF write-back > A0000-BFFFF uncachable > C0000-C7FFF write-protect > C8000-EFFFF uncachable > F0000-FFFFF write-protect > MTRR variable ranges enabled: > 0 base 000000000 mask FF0000000 write-back > 1 base 00E000000 mask FFE000000 uncachable > 2 base 0D0000000 mask FF8000000 write-combining > 3 disabled > 4 disabled > 5 disabled > 6 disabled > 7 disabled > initial memory mapped : 0 - 00800000 > init_memory_mapping: 0000000000000000-000000000dff0000 > 0000000000 - 0000400000 page 4k > 0000400000 - 000dc00000 page 2M > 000dc00000 - 000dff0000 page 4k > kernel direct mapping tables up to dff0000 @ 10000-15000 > RAMDISK: 0dcc5000 - 0dfdf8aa > ACPI: RSDP 000f7170 00014 (v00 AWARD ) > ACPI: RSDT 0dff3000 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) > ACPI: FACP 0dff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) > ACPI: DSDT 0dff30c0 038FA (v01 AWARD AWRDACPI 00001000 MSFT 0100000E) > ACPI: FACS 0dff0000 00040 > ACPI: APIC 0dff69c0 0005A (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) > ACPI: Local APIC address 0xfee00000 > 0MB HIGHMEM available. > 223MB LOWMEM available. > mapped low ram: 0 - 0dff0000 > low ram: 0 - 0dff0000 > node 0 low ram: 00000000 - 0dff0000 > node 0 bootmap 00011000 - 00012c00 > (9 early reservations) ==> bootmem [0000000000 - 000dff0000] > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - > 0000001000] > #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - > 0000002000] > #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - > 0000007000] > #3 [0000100000 - 0000637f00] TEXT DATA BSS ==> [0000100000 - > 0000637f00] > #4 [000dcc5000 - 000dfdf8aa] RAMDISK ==> [000dcc5000 - > 000dfdf8aa] > #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - > 0000100000] > #6 [0000638000 - 000063a06a] BRK ==> [0000638000 - > 000063a06a] > #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - > 0000011000] > #8 [0000011000 - 0000013000] BOOTMAP ==> [0000011000 - > 0000013000] > found SMP MP-table at [c00f57a0] f57a0 > Zone PFN ranges: > DMA 0x00000010 -> 0x00001000 > Normal 0x00001000 -> 0x0000dff0 > HighMem 0x0000dff0 -> 0x0000dff0 > Movable zone start PFN for each node > early_node_map[2] active PFN ranges > 0: 0x00000010 -> 0x0000009f > 0: 0x00000100 -> 0x0000dff0 > On node 0 totalpages: 57215 > free_area_init_node: node 0, pgdat c0561da0, node_mem_map c1000200 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 3951 pages, LIFO batch:0 > Normal zone: 416 pages used for memmap > Normal zone: 52816 pages, LIFO batch:15 > Using APIC driver default > ACPI: PM-Timer IO Port: 0x1008 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > Using ACPI (MADT) for SMP configuration information > SMP: Allowing 1 CPUs, 0 hotplug CPUs > nr_irqs_gsi: 24 > PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 > PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 > Allocating PCI resources starting at e000000 (gap: e000000:f0c00000) > NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 > PERCPU: Embedded 15 pages at c11c2000, static data 38684 bytes > Built 1 zonelists in Zone order, mobility grouping on. Total pages: > 56767 > Kernel command line: real_root=/dev/hdc6 udev > PID hash table entries: 1024 (order: 10, 4096 bytes) > Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) > Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > Initializing HighMem for node 0 (00000000:00000000) > Memory: 218040k/229312k available (3005k kernel code, 10620k reserved, > 1508k data, 428k init, 0k highmem) > virtual kernel memory layout: > fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) > pkmap : 0xff800000 - 0xffc00000 (4096 kB) > vmalloc : 0xce7f0000 - 0xff7fe000 ( 784 MB) > lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB) > .init : 0xc0569000 - 0xc05d4000 ( 428 kB) > .data : 0xc03ef6c0 - 0xc05688a8 (1508 kB) > .text : 0xc0100000 - 0xc03ef6c0 (3005 kB) > Checking if this processor honours the WP bit even in supervisor > mode...Ok. > Hierarchical RCU implementation. > NR_IRQS:512 > CPU 0 irqstacks, hard=c11c2000 soft=c11c3000 > Fast TSC calibration using PIT > Detected 1662.338 MHz processor. > Console: colour VGA+ 80x25 > console [tty0] enabled > Calibrating delay loop (skipped), value calculated using timer > frequency.. 3324.67 BogoMIPS (lpj=16623380) > Security Framework initialized > Mount-cache hash table entries: 512 > Initializing cgroup subsys ns > Initializing cgroup subsys cpuacct > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 256K (64 bytes/line) > mce: CPU supports 4 MCE banks > Performance Counters: AMD PMU driver. > ... version: 0 > ... bit width: 48 > ... generic counters: 4 > ... value mask: 0000ffffffffffff > ... max period: 00007fffffffffff > ... fixed-purpose counters: 0 > ... counter mask: 000000000000000f > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > Freeing SMP alternatives: 25k freed > ACPI: Core revision 20090521 > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > CPU0: AMD Sempron(tm) 2400+ stepping 01 > Brought up 1 CPUs > Total of 1 processors activated (3324.67 BogoMIPS). > CPU0 attaching NULL sched-domain. > Booting paravirtualized kernel on bare hardware > xor: automatically using best checksumming function: pIII_sse > pIII_sse : 4598.000 MB/sec > xor: using function: pIII_sse (4598.000 MB/sec) > NET: Registered protocol family 16 > ACPI: bus type pci registered > dca service started, version 1.8 > PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1 > bio: create slab at 0 > ACPI: EC: Look up EC in DSDT > ACPI: Interpreter enabled > ACPI: (supports S0 S1 S4 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: No dock devices found. > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] > pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] > pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] > pci 0000:00:02.5: reg 18 io port: [0x170-0x177] > pci 0000:00:02.5: reg 1c io port: [0x374-0x377] > pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f] > pci 0000:00:02.5: PME# supported from D3cold > pci 0000:00:02.5: PME# disabled > pci 0000:00:02.7: reg 10 io port: [0xe000-0xe0ff] > pci 0000:00:02.7: reg 14 io port: [0xe400-0xe47f] > pci 0000:00:02.7: supports D1 D2 > pci 0000:00:02.7: PME# supported from D3hot D3cold > pci 0000:00:02.7: PME# disabled > pci 0000:00:03.0: reg 10 32bit mmio: [0xe1104000-0xe1104fff] > pci 0000:00:03.1: reg 10 32bit mmio: [0xe1100000-0xe1100fff] > pci 0000:00:03.2: reg 10 32bit mmio: [0xe1101000-0xe1101fff] > pci 0000:00:03.3: reg 10 32bit mmio: [0xe1102000-0xe1102fff] > pci 0000:00:03.3: PME# supported from D0 D3hot D3cold > pci 0000:00:03.3: PME# disabled > pci 0000:00:04.0: reg 10 io port: [0xe800-0xe8ff] > pci 0000:00:04.0: reg 14 32bit mmio: [0xe1103000-0xe1103fff] > pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff] > pci 0000:00:04.0: supports D1 D2 > pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:04.0: PME# disabled > pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff] > pci 0000:01:00.0: reg 14 32bit mmio: [0xe1000000-0xe101ffff] > pci 0000:01:00.0: reg 18 io port: [0xd000-0xd07f] > pci 0000:01:00.0: supports D1 D2 > pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] > pci 0000:00:01.0: bridge 32bit mmio: [0xe1000000-0xe10fffff] > pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff] > pci_bus 0000:00: on NUMA node 0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) > SCSI subsystem initialized > libata version 3.00 loaded. > raid6: int32x1 433 MB/s > raid6: int32x2 652 MB/s > raid6: int32x4 573 MB/s > raid6: int32x8 458 MB/s > raid6: mmxx1 1356 MB/s > raid6: mmxx2 2433 MB/s > raid6: sse1x1 1276 MB/s > raid6: sse1x2 2020 MB/s > raid6: using algorithm sse1x2 (2020 MB/s) > PCI: Using ACPI for IRQ routing > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 12 devices > ACPI: ACPI bus type pnp unregistered > system 00:00: iomem range 0xc8000-0xcbfff has been reserved > system 00:00: iomem range 0xf0000-0xf7fff could not be reserved > system 00:00: iomem range 0xf8000-0xfbfff could not be reserved > system 00:00: iomem range 0xfc000-0xfffff could not be reserved > system 00:00: iomem range 0xdff0000-0xdffffff could not be reserved > system 00:00: iomem range 0xffff0000-0xffffffff has been reserved > system 00:00: iomem range 0x0-0x9ffff could not be reserved > system 00:00: iomem range 0x100000-0xdfeffff could not be reserved > system 00:00: iomem range 0xffee0000-0xffefffff has been reserved > system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved > system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved > system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved > system 00:02: ioport range 0x4d0-0x4d1 has been reserved > system 00:02: ioport range 0x800-0x805 has been reserved > system 00:02: ioport range 0x290-0x297 has been reserved > pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 > pci 0000:00:01.0: IO window: 0xd000-0xdfff > pci 0000:00:01.0: MEM window: 0xe1000000-0xe10fffff > pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff > pci_bus 0000:00: resource 0 io: [0x00-0xffff] > pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] > pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] > pci_bus 0000:01: resource 1 mem: [0xe1000000-0xe10fffff] > pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff] > NET: Registered protocol family 2 > IP route cache hash table entries: 2048 (order: 1, 8192 bytes) > TCP established hash table entries: 8192 (order: 4, 65536 bytes) > TCP bind hash table entries: 8192 (order: 4, 65536 bytes) > TCP: Hash tables configured (established 8192 bind 8192) > TCP reno registered > NET: Registered protocol family 1 > Trying to unpack rootfs image as initramfs... > Freeing initrd memory: 3178k freed > apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) > apm: overridden by ACPI. > audit: initializing netlink socket (disabled) > type=2000 audit(1262420890.810:1): initialized > HugeTLB registered 4 MB page size, pre-allocated 0 pages > VFS: Disk quotas dquot_6.5.2 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > squashfs: version 4.0 (2009/01/31) Phillip Lougher > msgmni has been set to 432 > alg: No test for stdrng (krng) > async_tx: api initialized (async) > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) > io scheduler noop registered > io scheduler anticipatory registered (default) > io scheduler deadline registered > io scheduler cfq registered > pci 0000:01:00.0: Boot video device > isapnp: Scanning for PnP cards... > Switched to high resolution mode on CPU 0 > isapnp: No Plug & Play device found > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > brd: module loaded > loop: module loaded > input: Macintosh mouse button emulation as /devices/virtual/input/input0 > Uniform Multi-Platform E-IDE driver > pci 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > sis5513 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller > sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0x01) > sis5513 0000:00:02.5: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x4000-0x4007 > ide1: BM-DMA at 0x4008-0x400f > Probing IDE interface ide0... > hda: LITE-ON COMBO SOHC-5236V, ATAPI CD/DVD-ROM drive > hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 > hda: UDMA/33 mode selected > Probing IDE interface ide1... > hdc: WDC WD800BB-00JHC0, ATA DISK drive > hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 > hdc: host side 80-wire cable detection failed, limiting max speed to > UDMA33 > hdc: UDMA/33 mode selected > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > ide_generic: please use "probe_mask=0x3f" module parameter for probing > all legacy ISA IDE ports > ide-gd driver 1.18 > hdc: max request size: 128KiB > hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63 > hdc: cache flushes supported > hdc: hdc1 hdc3 hdc4 < hdc5 hdc6 > > ide-cd driver 5.00 > ide-cd: hda: ATAPI 52X DVD-ROM CD-R/RW drive, 1536kB Cache > Uniform CD-ROM driver Revision: 3.20 > Loading iSCSI transport class v2.0-870. > iscsi: registered transport (tcp) > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > md: raid0 personality registered for level 0 > md: raid1 personality registered for level 1 > md: raid6 personality registered for level 6 > md: raid5 personality registered for level 5 > md: raid4 personality registered for level 4 > cpuidle: using governor ladder > TCP cubic registered > NET: Registered protocol family 17 > Using IPI No-Shortcut mode > registered taskstats version 1 > Freeing unused kernel memory: 428k freed > input: AT Translated Set 2 keyboard > as /devices/platform/i8042/serio0/input/input1 > input: ImPS/2 Generic Wheel Mouse > as /devices/platform/i8042/serio1/input/input2 > NCR53c406a: no available ports found > scsi: Detection failed (no card) > GDT-HA: Storage RAID Controller Driver. Version: 3.05 > qlogicfas: no cards were found, please specify I/O address and IRQ using > iobase= and irq= optionsFailed initialization of WD-7000 SCSI card! > NCR53c406a: no available ports found > imm: Version 2.05 (for Linux 2.4.0) > sym53c416.c: Version 1.0.0-ac > Fusion MPT base driver 3.04.10 > Copyright (c) 1999-2008 LSI Corporation > Fusion MPT SPI Host driver 3.04.10 > Fusion MPT FC Host driver 3.04.10 > Fusion MPT SAS Host driver 3.04.10 > 3ware Storage Controller device driver for Linux v1.26.02.002. > 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. > Compaq SMART2 Driver (v 2.6.0) > HP CISS Driver (v 3.6.20) > Adaptec aacraid driver 1.1-5[2461]-ms > megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) > megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) > megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 > QLogic Fibre Channel HBA Driver: 8.03.01-k4 > Emulex LightPulse Fibre Channel SCSI driver 8.3.3 > Copyright(c) 2004-2009 Emulex. All rights reserved. > aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 > ehci_hcd 0000:00:03.3: EHCI Host Controller > ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:03.3: cache line size of 64 is not supported > ehci_hcd 0000:00:03.3: irq 23, io mem 0xe1102000 > ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > Initializing USB Mass Storage driver... > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > uhci_hcd: USB Universal Host Controller Interface driver > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > ohci_hcd 0000:00:03.0: OHCI Host Controller > ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 > ohci_hcd 0000:00:03.0: irq 20, io mem 0xe1104000 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 3 ports detected > ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > ohci_hcd 0000:00:03.1: OHCI Host Controller > ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 > ohci_hcd 0000:00:03.1: irq 21, io mem 0xe1100000 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 3 ports detected > ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 > ohci_hcd 0000:00:03.2: OHCI Host Controller > ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 > ohci_hcd 0000:00:03.2: irq 22, io mem 0xe1101000 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > usbcore: registered new interface driver hiddev > usbcore: registered new interface driver usbhid > usbhid: v2.6:USB HID core driver > sl811: driver sl811-hcd, 19 May 2005 > device-mapper: uevent: version 1.0.3 > device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: > dm-devel@redhat.com > md: raid10 personality registered for level 10 > JFS: nTxBlock = 1733, nTxLock = 13867 > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > SGI XFS with ACLs, security attributes, realtime, large block/inode > numbers, no debug enabled > SGI XFS Quota Management subsystem > fuse init (API version 7.12) > Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI > Copyright (c) 1999-2006 Intel Corporation. > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with writeback data mode. > udev: starting version 146 > IT8705 SuperIO detected. > parport_pc 00:09: reported by Plug and Play ACPI > parport0: PC-style at 0x378 (0x778), irq 7, dma 3 > [PCSPP,TRISTATE,COMPAT,ECP,DMA] > FDC 0 is a post-1991 82077 > input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 > ACPI: Power Button [PWRF] > input: Power Button > as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 > ACPI: Power Button [PWRB] > input: Sleep Button > as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5 > ACPI: Sleep Button [FUTS] > Linux agpgart interface v0.103 > thermal LNXTHERM:01: registered as thermal_zone0 > ACPI: Thermal Zone [THRM] (40 C) > fan PNP0C0B:00: registered as cooling_device0 > ACPI: Fan [FAN] (on) > agpgart-sis 0000:00:00.0: SiS chipset [1039/0741] > agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 > processor LNXCPU:00: registered as cooling_device1 > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > input: PC Speaker as /devices/platform/pcspkr/input/input6 > shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > ppdev: user-space parallel port driver > Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > sis900.c: v1.08.10 Apr. 2 2006 > rtc_cmos 00:04: RTC can wake from S4 > rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one year, 242 bytes nvram > intel8x0_measure_ac97_clock: measured 59902 usecs (2881 samples) > intel8x0: clocking to 48000 > sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. > 0000:00:04.0: Using transceiver found at address 1 as default > eth0: SiS 900 PCI Fast Ethernet at 0xe800, IRQ 19, 00:11:5b:84:60:3b > EXT3 FS on hdc6, internal journal > lp0: using parport0 (interrupt-driven). > Adding 248968k swap on /dev/hdc5. Priority:-1 extents:1 across:248968k > eth0: Media Link On 100mbps full-duplex > warning: `named' uses 32-bit capabilities (legacy support in use) > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > ip_tables: (C) 2000-2006 Netfilter Core Team > nf_conntrack version 0.5.0 (3583 buckets, 14332 max) > CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use > nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option > or > sysctl net.netfilter.nf_conntrack_acct=1 to enable it. > Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > svc: failed to register lockdv1 RPC service (errno 97). > NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery > directory > NFSD: starting 90-second grace period > eth0: no IPv6 routers present > usb 1-6: new high speed USB device using ehci_hcd and address 2 > usb 1-6: configuration #1 chosen from 1 choice > scsi2 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 2 > usb-storage: waiting for device to settle before scanning > IPKF INPUT Catch-all: IN=eth0 OUT= > MAC=ff:ff:ff:ff:ff:ff:00:1f:3a:15:c1:0d:08:00 SRC=192.168.1.104 > DST=192.168.1.255 LEN=242 TOS=0x00 PREC=0x00 TTL=128 ID=25546 PROTO=UDP > SPT=138 DPT=138 LEN=222 > usb-storage: device scan complete > scsi 2:0:0:0: Direct-Access WDC WD80 0JB-00JJC0 0811 PQ: 0 > ANSI: 0 > sd 2:0:0:0: Attached scsi generic sg0 type 0 > sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) > sd 2:0:0:0: [sda] Test WP failed, assume Write Enabled > sd 2:0:0:0: [sda] Assuming drive cache: write through > sd 2:0:0:0: [sda] Test WP failed, assume Write Enabled > sd 2:0:0:0: [sda] Assuming drive cache: write through > sda: sda1 > sd 2:0:0:0: [sda] Test WP failed, assume Write Enabled > sd 2:0:0:0: [sda] Assuming drive cache: write through > sd 2:0:0:0: [sda] Attached SCSI disk > IPKF INPUT Catch-all: IN=eth0 OUT= > MAC=ff:ff:ff:ff:ff:ff:00:24:1e:5b:3b:c7:08:00 SRC=0.0.0.0 > DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=64 ID=12332 PROTO=UDP > SPT=68 DPT=67 LEN=308 > IPKF INPUT Catch-all: IN=eth0 OUT= > MAC=01:00:5e:00:00:01:00:23:69:85:2f:40:08:00 SRC=192.168.1.1 > DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 > catherine ~ # > > > All I know is that at one time, the external drive was recognized > on /dev/sda and at that time I formatted the drive for swap space and > ran swapon /dev/sda1 Now for some reason it doesn't work. I want it to > work.