From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from pigeon.gentoo.org ([208.92.234.80] helo=lists.gentoo.org) by finch.gentoo.org with esmtp (Exim 4.60) (envelope-from ) id 1NR556-0007bf-IN for garchives@archives.gentoo.org; Sat, 02 Jan 2010 14:35:55 +0000 Received: from pigeon.gentoo.org (localhost [127.0.0.1]) by pigeon.gentoo.org (Postfix) with SMTP id 57350E059C; Sat, 2 Jan 2010 14:35:25 +0000 (UTC) Received: from mail-yx0-f174.google.com (mail-yx0-f174.google.com [209.85.210.174]) by pigeon.gentoo.org (Postfix) with ESMTP id 13F67E059C for ; Sat, 2 Jan 2010 14:35:25 +0000 (UTC) Received: by yxe4 with SMTP id 4so11904053yxe.32 for ; Sat, 02 Jan 2010 06:35:24 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:subject:from:to:in-reply-to :references:content-type:date:message-id:mime-version:x-mailer :content-transfer-encoding; bh=uYTmS62vYDCfW3/49JPNUWVUQmyddPUCRdxpMLXw1LQ=; b=rURR3KdV7LsUJCdD9x+fW7u62UV/kuLjLGiuO5B0c/xjjTsIcOMyTSk17cjcGVCsCF sOJhWlUd2JYyf4la0G1Ojz8hAY9gFAlj6RLGSgnZSZDYUANcy3IUXkrnzjftaFuz2c+T neCurZzLMVYa6u22/G8I5YywR8lNpRN6TRueg= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=subject:from:to:in-reply-to:references:content-type:date:message-id :mime-version:x-mailer:content-transfer-encoding; b=qsoP+vMrLQbZJUwBaJSiz+yKPNud7pZ2SclfBqBuDrowJCr2L5RQ5RnFZCUVGuSfmJ DxpJojA4bi/ICwzHqdzlsYa4lZBDUpGN5i28B/rkGQrAwPexFiS5eL6ahbdlDNFq6nAA NAVahBsJk/heNB+duFLnE/3fpREaurN09vLUQ= Received: by 10.150.252.37 with SMTP id z37mr23093587ybh.228.1262442924721; Sat, 02 Jan 2010 06:35:24 -0800 (PST) Received: from ?192.168.1.3? (adsl-64-149-63-75.dsl.tul2ok.sbcglobal.net [64.149.63.75]) by mx.google.com with ESMTPS id 23sm15633754iwn.3.2010.01.02.06.35.21 (version=SSLv3 cipher=RC4-MD5); Sat, 02 Jan 2010 06:35:22 -0800 (PST) Subject: Re: [gentoo-user] Re: Externel drive should be /dev/sda1, but /dev/sda1 does not exist From: Michael Sullivan To: gentoo-user@lists.gentoo.org In-Reply-To: References: <1262353732.26846.60.camel@camille.espersunited.com> Content-Type: text/plain Date: Sat, 02 Jan 2010 08:35:19 -0600 Message-Id: <1262442919.26846.69.camel@camille.espersunited.com> Precedence: bulk List-Post: List-Help: List-Unsubscribe: List-Subscribe: List-Id: Gentoo Linux mail X-BeenThere: gentoo-user@lists.gentoo.org Reply-to: gentoo-user@lists.gentoo.org Mime-Version: 1.0 X-Mailer: Evolution 2.26.3 Content-Transfer-Encoding: 7bit X-Archives-Salt: d72cd552-8f5a-4642-b417-25fd7f3e9bc2 X-Archives-Hash: e655a0c38b72de752fc5b2a485f6fb4c On Fri, 2010-01-01 at 11:37 -0800, walt wrote: > On 01/01/2010 05:48 AM, Michael Sullivan wrote: > > Hello > > > > My wife's computer is pretty slow, so I've attached and old hard drive > > into a hard drive enclosure and hooked it into her USB port for > > additional swap space. It used to work. The swap space is supposed to > > be /dev/sda1. The problem is that for some reason when I rebooted this > > morning with a new kernel, /dev/sda does not exist anymore... > > Hm. So the only thing you changed was the new kernel? Might help to > know why you built the new kernel. What problem were you solving by > doing it? > OK here goes. I built the new kernel because with the old one /dev/sda didn't seem to exist when I know it should. And besides, there was a newer kernel marked as stable and aren't we always supposed to use the newest stable kernel for security reasons, unless there's something that we need done that the new kernel doesn't do? > I would try booting the machine without the USB swap disk and then > hotplug it when the machine is already running. What does dmesg say > then? Can be simpler to interpret when you know exactly which lines > were printed in response to the newly connected drive. I rebooted the machine with the drive unplugged and ran dmesg: catherine ~ # cat dmesg.txt Initializing cgroup subsys cpuset Linux version 2.6.31-gentoo-r6 (root@catherine) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP Thu Dec 31 19:13:07 CST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000dff0000 (usable) BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS) BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) DMI 2.2 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0xdff0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FF0000000 write-back 1 base 00E000000 mask FFE000000 uncachable 2 base 0D0000000 mask FF8000000 write-combining 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled initial memory mapped : 0 - 00800000 init_memory_mapping: 0000000000000000-000000000dff0000 0000000000 - 0000400000 page 4k 0000400000 - 000dc00000 page 2M 000dc00000 - 000dff0000 page 4k kernel direct mapping tables up to dff0000 @ 10000-15000 RAMDISK: 0dcc5000 - 0dfdf8aa ACPI: RSDP 000f7170 00014 (v00 AWARD ) ACPI: RSDT 0dff3000 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) ACPI: FACP 0dff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) ACPI: DSDT 0dff30c0 038FA (v01 AWARD AWRDACPI 00001000 MSFT 0100000E) ACPI: FACS 0dff0000 00040 ACPI: APIC 0dff69c0 0005A (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) ACPI: Local APIC address 0xfee00000 0MB HIGHMEM available. 223MB LOWMEM available. mapped low ram: 0 - 0dff0000 low ram: 0 - 0dff0000 node 0 low ram: 00000000 - 0dff0000 node 0 bootmap 00011000 - 00012c00 (9 early reservations) ==> bootmem [0000000000 - 000dff0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 0000637f00] TEXT DATA BSS ==> [0000100000 - 0000637f00] #4 [000dcc5000 - 000dfdf8aa] RAMDISK ==> [000dcc5000 - 000dfdf8aa] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #6 [0000638000 - 000063a06a] BRK ==> [0000638000 - 000063a06a] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] #8 [0000011000 - 0000013000] BOOTMAP ==> [0000011000 - 0000013000] found SMP MP-table at [c00f57a0] f57a0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x0000dff0 HighMem 0x0000dff0 -> 0x0000dff0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0000dff0 On node 0 totalpages: 57215 free_area_init_node: node 0, pgdat c0561da0, node_mem_map c1000200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 416 pages used for memmap Normal zone: 52816 pages, LIFO batch:15 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 1 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at e000000 (gap: e000000:f0c00000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 15 pages at c11c2000, static data 38684 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 56767 Kernel command line: real_root=/dev/hdc6 udev PID hash table entries: 1024 (order: 10, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (00000000:00000000) Memory: 218040k/229312k available (3005k kernel code, 10620k reserved, 1508k data, 428k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xce7f0000 - 0xff7fe000 ( 784 MB) lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB) .init : 0xc0569000 - 0xc05d4000 ( 428 kB) .data : 0xc03ef6c0 - 0xc05688a8 (1508 kB) .text : 0xc0100000 - 0xc03ef6c0 (3005 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Hierarchical RCU implementation. NR_IRQS:512 CPU 0 irqstacks, hard=c11c2000 soft=c11c3000 Fast TSC calibration using PIT Detected 1662.338 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.67 BogoMIPS (lpj=16623380) Security Framework initialized Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) mce: CPU supports 4 MCE banks Performance Counters: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic counters: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose counters: 0 ... counter mask: 000000000000000f Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 25k freed ACPI: Core revision 20090521 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Sempron(tm) 2400+ stepping 01 Brought up 1 CPUs Total of 1 processors activated (3324.67 BogoMIPS). CPU0 attaching NULL sched-domain. Booting paravirtualized kernel on bare hardware xor: automatically using best checksumming function: pIII_sse pIII_sse : 4598.000 MB/sec xor: using function: pIII_sse (4598.000 MB/sec) NET: Registered protocol family 16 ACPI: bus type pci registered dca service started, version 1.8 PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1 bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] pci 0000:00:02.5: reg 18 io port: [0x170-0x177] pci 0000:00:02.5: reg 1c io port: [0x374-0x377] pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f] pci 0000:00:02.5: PME# supported from D3cold pci 0000:00:02.5: PME# disabled pci 0000:00:02.7: reg 10 io port: [0xe000-0xe0ff] pci 0000:00:02.7: reg 14 io port: [0xe400-0xe47f] pci 0000:00:02.7: supports D1 D2 pci 0000:00:02.7: PME# supported from D3hot D3cold pci 0000:00:02.7: PME# disabled pci 0000:00:03.0: reg 10 32bit mmio: [0xe1104000-0xe1104fff] pci 0000:00:03.1: reg 10 32bit mmio: [0xe1100000-0xe1100fff] pci 0000:00:03.2: reg 10 32bit mmio: [0xe1101000-0xe1101fff] pci 0000:00:03.3: reg 10 32bit mmio: [0xe1102000-0xe1102fff] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold pci 0000:00:03.3: PME# disabled pci 0000:00:04.0: reg 10 io port: [0xe800-0xe8ff] pci 0000:00:04.0: reg 14 32bit mmio: [0xe1103000-0xe1103fff] pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:00:04.0: supports D1 D2 pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff] pci 0000:01:00.0: reg 14 32bit mmio: [0xe1000000-0xe101ffff] pci 0000:01:00.0: reg 18 io port: [0xd000-0xd07f] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] pci 0000:00:01.0: bridge 32bit mmio: [0xe1000000-0xe10fffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) SCSI subsystem initialized libata version 3.00 loaded. raid6: int32x1 433 MB/s raid6: int32x2 652 MB/s raid6: int32x4 573 MB/s raid6: int32x8 458 MB/s raid6: mmxx1 1356 MB/s raid6: mmxx2 2433 MB/s raid6: sse1x1 1276 MB/s raid6: sse1x2 2020 MB/s raid6: using algorithm sse1x2 (2020 MB/s) PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0xc8000-0xcbfff has been reserved system 00:00: iomem range 0xf0000-0xf7fff could not be reserved system 00:00: iomem range 0xf8000-0xfbfff could not be reserved system 00:00: iomem range 0xfc000-0xfffff could not be reserved system 00:00: iomem range 0xdff0000-0xdffffff could not be reserved system 00:00: iomem range 0xffff0000-0xffffffff has been reserved system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0x100000-0xdfeffff could not be reserved system 00:00: iomem range 0xffee0000-0xffefffff has been reserved system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x800-0x805 has been reserved system 00:02: ioport range 0x290-0x297 has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xd000-0xdfff pci 0000:00:01.0: MEM window: 0xe1000000-0xe10fffff pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] pci_bus 0000:01: resource 1 mem: [0xe1000000-0xe10fffff] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff] NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 3178k freed apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) type=2000 audit(1262420890.810:1): initialized HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 4.0 (2009/01/31) Phillip Lougher msgmni has been set to 432 alg: No test for stdrng (krng) async_tx: api initialized (async) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci 0000:01:00.0: Boot video device isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 Uniform Multi-Platform E-IDE driver pci 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sis5513 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0x01) sis5513 0000:00:02.5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x4000-0x4007 ide1: BM-DMA at 0x4008-0x400f Probing IDE interface ide0... hda: LITE-ON COMBO SOHC-5236V, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected Probing IDE interface ide1... hdc: WDC WD800BB-00JHC0, ATA DISK drive hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdc: host side 80-wire cable detection failed, limiting max speed to UDMA33 hdc: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 hdc: max request size: 128KiB hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63 hdc: cache flushes supported hdc: hdc1 hdc3 hdc4 < hdc5 hdc6 > ide-cd driver 5.00 ide-cd: hda: ATAPI 52X DVD-ROM CD-R/RW drive, 1536kB Cache Uniform CD-ROM driver Revision: 3.20 Loading iSCSI transport class v2.0-870. iscsi: registered transport (tcp) PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 cpuidle: using governor ladder TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 428k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2 NCR53c406a: no available ports found scsi: Detection failed (no card) GDT-HA: Storage RAID Controller Driver. Version: 3.05 qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card! NCR53c406a: no available ports found imm: Version 2.05 (for Linux 2.4.0) sym53c416.c: Version 1.0.0-ac Fusion MPT base driver 3.04.10 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.10 Fusion MPT FC Host driver 3.04.10 Fusion MPT SAS Host driver 3.04.10 3ware Storage Controller device driver for Linux v1.26.02.002. 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.20) Adaptec aacraid driver 1.1-5[2461]-ms megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 QLogic Fibre Channel HBA Driver: 8.03.01-k4 Emulex LightPulse Fibre Channel SCSI driver 8.3.3 Copyright(c) 2004-2009 Emulex. All rights reserved. aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:03.3: EHCI Host Controller ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:03.3: cache line size of 64 is not supported ehci_hcd 0000:00:03.3: irq 23, io mem 0xe1102000 ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. uhci_hcd: USB Universal Host Controller Interface driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.0: irq 20, io mem 0xe1104000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:03.1: irq 21, io mem 0xe1100000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ohci_hcd 0000:00:03.2: OHCI Host Controller ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:03.2: irq 22, io mem 0xe1101000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver sl811: driver sl811-hcd, 19 May 2005 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com md: raid10 personality registered for level 10 JFS: nTxBlock = 1733, nTxLock = 13867 RPC: Registered udp transport module. RPC: Registered tcp transport module. SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem fuse init (API version 7.12) Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. udev: starting version 146 IT8705 SuperIO detected. parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] FDC 0 is a post-1991 82077 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5 ACPI: Sleep Button [FUTS] Linux agpgart interface v0.103 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (40 C) fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN] (on) agpgart-sis 0000:00:00.0: SiS chipset [1039/0741] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 processor LNXCPU:00: registered as cooling_device1 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 input: PC Speaker as /devices/platform/pcspkr/input/input6 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ppdev: user-space parallel port driver Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sis900.c: v1.08.10 Apr. 2 2006 rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, 242 bytes nvram intel8x0_measure_ac97_clock: measured 59902 usecs (2881 samples) intel8x0: clocking to 48000 sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. 0000:00:04.0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xe800, IRQ 19, 00:11:5b:84:60:3b EXT3 FS on hdc6, internal journal lp0: using parport0 (interrupt-driven). Adding 248968k swap on /dev/hdc5. Priority:-1 extents:1 across:248968k eth0: Media Link On 100mbps full-duplex warning: `named' uses 32-bit capabilities (legacy support in use) NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (3583 buckets, 14332 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). svc: failed to register lockdv1 RPC service (errno 97). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period eth0: no IPv6 routers present catherine ~ # and then plugged in: catherine ~ # cat dmesg-new.txt Initializing cgroup subsys cpuset Linux version 2.6.31-gentoo-r6 (root@catherine) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP Thu Dec 31 19:13:07 CST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000dff0000 (usable) BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS) BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) DMI 2.2 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0xdff0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FF0000000 write-back 1 base 00E000000 mask FFE000000 uncachable 2 base 0D0000000 mask FF8000000 write-combining 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled initial memory mapped : 0 - 00800000 init_memory_mapping: 0000000000000000-000000000dff0000 0000000000 - 0000400000 page 4k 0000400000 - 000dc00000 page 2M 000dc00000 - 000dff0000 page 4k kernel direct mapping tables up to dff0000 @ 10000-15000 RAMDISK: 0dcc5000 - 0dfdf8aa ACPI: RSDP 000f7170 00014 (v00 AWARD ) ACPI: RSDT 0dff3000 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) ACPI: FACP 0dff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) ACPI: DSDT 0dff30c0 038FA (v01 AWARD AWRDACPI 00001000 MSFT 0100000E) ACPI: FACS 0dff0000 00040 ACPI: APIC 0dff69c0 0005A (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) ACPI: Local APIC address 0xfee00000 0MB HIGHMEM available. 223MB LOWMEM available. mapped low ram: 0 - 0dff0000 low ram: 0 - 0dff0000 node 0 low ram: 00000000 - 0dff0000 node 0 bootmap 00011000 - 00012c00 (9 early reservations) ==> bootmem [0000000000 - 000dff0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 0000637f00] TEXT DATA BSS ==> [0000100000 - 0000637f00] #4 [000dcc5000 - 000dfdf8aa] RAMDISK ==> [000dcc5000 - 000dfdf8aa] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #6 [0000638000 - 000063a06a] BRK ==> [0000638000 - 000063a06a] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] #8 [0000011000 - 0000013000] BOOTMAP ==> [0000011000 - 0000013000] found SMP MP-table at [c00f57a0] f57a0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x0000dff0 HighMem 0x0000dff0 -> 0x0000dff0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0000dff0 On node 0 totalpages: 57215 free_area_init_node: node 0, pgdat c0561da0, node_mem_map c1000200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 416 pages used for memmap Normal zone: 52816 pages, LIFO batch:15 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 1 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at e000000 (gap: e000000:f0c00000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 15 pages at c11c2000, static data 38684 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 56767 Kernel command line: real_root=/dev/hdc6 udev PID hash table entries: 1024 (order: 10, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (00000000:00000000) Memory: 218040k/229312k available (3005k kernel code, 10620k reserved, 1508k data, 428k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xce7f0000 - 0xff7fe000 ( 784 MB) lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB) .init : 0xc0569000 - 0xc05d4000 ( 428 kB) .data : 0xc03ef6c0 - 0xc05688a8 (1508 kB) .text : 0xc0100000 - 0xc03ef6c0 (3005 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Hierarchical RCU implementation. NR_IRQS:512 CPU 0 irqstacks, hard=c11c2000 soft=c11c3000 Fast TSC calibration using PIT Detected 1662.338 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.67 BogoMIPS (lpj=16623380) Security Framework initialized Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) mce: CPU supports 4 MCE banks Performance Counters: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic counters: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose counters: 0 ... counter mask: 000000000000000f Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 25k freed ACPI: Core revision 20090521 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Sempron(tm) 2400+ stepping 01 Brought up 1 CPUs Total of 1 processors activated (3324.67 BogoMIPS). CPU0 attaching NULL sched-domain. Booting paravirtualized kernel on bare hardware xor: automatically using best checksumming function: pIII_sse pIII_sse : 4598.000 MB/sec xor: using function: pIII_sse (4598.000 MB/sec) NET: Registered protocol family 16 ACPI: bus type pci registered dca service started, version 1.8 PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1 bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] pci 0000:00:02.5: reg 18 io port: [0x170-0x177] pci 0000:00:02.5: reg 1c io port: [0x374-0x377] pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f] pci 0000:00:02.5: PME# supported from D3cold pci 0000:00:02.5: PME# disabled pci 0000:00:02.7: reg 10 io port: [0xe000-0xe0ff] pci 0000:00:02.7: reg 14 io port: [0xe400-0xe47f] pci 0000:00:02.7: supports D1 D2 pci 0000:00:02.7: PME# supported from D3hot D3cold pci 0000:00:02.7: PME# disabled pci 0000:00:03.0: reg 10 32bit mmio: [0xe1104000-0xe1104fff] pci 0000:00:03.1: reg 10 32bit mmio: [0xe1100000-0xe1100fff] pci 0000:00:03.2: reg 10 32bit mmio: [0xe1101000-0xe1101fff] pci 0000:00:03.3: reg 10 32bit mmio: [0xe1102000-0xe1102fff] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold pci 0000:00:03.3: PME# disabled pci 0000:00:04.0: reg 10 io port: [0xe800-0xe8ff] pci 0000:00:04.0: reg 14 32bit mmio: [0xe1103000-0xe1103fff] pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:00:04.0: supports D1 D2 pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff] pci 0000:01:00.0: reg 14 32bit mmio: [0xe1000000-0xe101ffff] pci 0000:01:00.0: reg 18 io port: [0xd000-0xd07f] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] pci 0000:00:01.0: bridge 32bit mmio: [0xe1000000-0xe10fffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) SCSI subsystem initialized libata version 3.00 loaded. raid6: int32x1 433 MB/s raid6: int32x2 652 MB/s raid6: int32x4 573 MB/s raid6: int32x8 458 MB/s raid6: mmxx1 1356 MB/s raid6: mmxx2 2433 MB/s raid6: sse1x1 1276 MB/s raid6: sse1x2 2020 MB/s raid6: using algorithm sse1x2 (2020 MB/s) PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0xc8000-0xcbfff has been reserved system 00:00: iomem range 0xf0000-0xf7fff could not be reserved system 00:00: iomem range 0xf8000-0xfbfff could not be reserved system 00:00: iomem range 0xfc000-0xfffff could not be reserved system 00:00: iomem range 0xdff0000-0xdffffff could not be reserved system 00:00: iomem range 0xffff0000-0xffffffff has been reserved system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0x100000-0xdfeffff could not be reserved system 00:00: iomem range 0xffee0000-0xffefffff has been reserved system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x800-0x805 has been reserved system 00:02: ioport range 0x290-0x297 has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xd000-0xdfff pci 0000:00:01.0: MEM window: 0xe1000000-0xe10fffff pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] pci_bus 0000:01: resource 1 mem: [0xe1000000-0xe10fffff] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff] NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 3178k freed apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) type=2000 audit(1262420890.810:1): initialized HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 4.0 (2009/01/31) Phillip Lougher msgmni has been set to 432 alg: No test for stdrng (krng) async_tx: api initialized (async) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci 0000:01:00.0: Boot video device isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 Uniform Multi-Platform E-IDE driver pci 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sis5513 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0x01) sis5513 0000:00:02.5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x4000-0x4007 ide1: BM-DMA at 0x4008-0x400f Probing IDE interface ide0... hda: LITE-ON COMBO SOHC-5236V, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected Probing IDE interface ide1... hdc: WDC WD800BB-00JHC0, ATA DISK drive hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdc: host side 80-wire cable detection failed, limiting max speed to UDMA33 hdc: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 hdc: max request size: 128KiB hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63 hdc: cache flushes supported hdc: hdc1 hdc3 hdc4 < hdc5 hdc6 > ide-cd driver 5.00 ide-cd: hda: ATAPI 52X DVD-ROM CD-R/RW drive, 1536kB Cache Uniform CD-ROM driver Revision: 3.20 Loading iSCSI transport class v2.0-870. iscsi: registered transport (tcp) PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 cpuidle: using governor ladder TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 428k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2 NCR53c406a: no available ports found scsi: Detection failed (no card) GDT-HA: Storage RAID Controller Driver. Version: 3.05 qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card! NCR53c406a: no available ports found imm: Version 2.05 (for Linux 2.4.0) sym53c416.c: Version 1.0.0-ac Fusion MPT base driver 3.04.10 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.10 Fusion MPT FC Host driver 3.04.10 Fusion MPT SAS Host driver 3.04.10 3ware Storage Controller device driver for Linux v1.26.02.002. 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.20) Adaptec aacraid driver 1.1-5[2461]-ms megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 QLogic Fibre Channel HBA Driver: 8.03.01-k4 Emulex LightPulse Fibre Channel SCSI driver 8.3.3 Copyright(c) 2004-2009 Emulex. All rights reserved. aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:03.3: EHCI Host Controller ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:03.3: cache line size of 64 is not supported ehci_hcd 0000:00:03.3: irq 23, io mem 0xe1102000 ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. uhci_hcd: USB Universal Host Controller Interface driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.0: irq 20, io mem 0xe1104000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:03.1: irq 21, io mem 0xe1100000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ohci_hcd 0000:00:03.2: OHCI Host Controller ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:03.2: irq 22, io mem 0xe1101000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver sl811: driver sl811-hcd, 19 May 2005 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com md: raid10 personality registered for level 10 JFS: nTxBlock = 1733, nTxLock = 13867 RPC: Registered udp transport module. RPC: Registered tcp transport module. SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem fuse init (API version 7.12) Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. udev: starting version 146 IT8705 SuperIO detected. parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] FDC 0 is a post-1991 82077 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5 ACPI: Sleep Button [FUTS] Linux agpgart interface v0.103 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (40 C) fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN] (on) agpgart-sis 0000:00:00.0: SiS chipset [1039/0741] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 processor LNXCPU:00: registered as cooling_device1 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 input: PC Speaker as /devices/platform/pcspkr/input/input6 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ppdev: user-space parallel port driver Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sis900.c: v1.08.10 Apr. 2 2006 rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, 242 bytes nvram intel8x0_measure_ac97_clock: measured 59902 usecs (2881 samples) intel8x0: clocking to 48000 sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. 0000:00:04.0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xe800, IRQ 19, 00:11:5b:84:60:3b EXT3 FS on hdc6, internal journal lp0: using parport0 (interrupt-driven). Adding 248968k swap on /dev/hdc5. Priority:-1 extents:1 across:248968k eth0: Media Link On 100mbps full-duplex warning: `named' uses 32-bit capabilities (legacy support in use) NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (3583 buckets, 14332 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). svc: failed to register lockdv1 RPC service (errno 97). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period eth0: no IPv6 routers present usb 1-6: new high speed USB device using ehci_hcd and address 2 usb 1-6: configuration #1 chosen from 1 choice scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning IPKF INPUT Catch-all: IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:1f:3a:15:c1:0d:08:00 SRC=192.168.1.104 DST=192.168.1.255 LEN=242 TOS=0x00 PREC=0x00 TTL=128 ID=25546 PROTO=UDP SPT=138 DPT=138 LEN=222 usb-storage: device scan complete scsi 2:0:0:0: Direct-Access WDC WD80 0JB-00JJC0 0811 PQ: 0 ANSI: 0 sd 2:0:0:0: Attached scsi generic sg0 type 0 sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 2:0:0:0: [sda] Test WP failed, assume Write Enabled sd 2:0:0:0: [sda] Assuming drive cache: write through sd 2:0:0:0: [sda] Test WP failed, assume Write Enabled sd 2:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 2:0:0:0: [sda] Test WP failed, assume Write Enabled sd 2:0:0:0: [sda] Assuming drive cache: write through sd 2:0:0:0: [sda] Attached SCSI disk IPKF INPUT Catch-all: IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:24:1e:5b:3b:c7:08:00 SRC=0.0.0.0 DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=64 ID=12332 PROTO=UDP SPT=68 DPT=67 LEN=308 IPKF INPUT Catch-all: IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:23:69:85:2f:40:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 catherine ~ # All I know is that at one time, the external drive was recognized on /dev/sda and at that time I formatted the drive for swap space and ran swapon /dev/sda1 Now for some reason it doesn't work. I want it to work.