From: Michael Sullivan <msulli1355@gmail.com>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] net.eth0 won't work!
Date: Wed, 19 Aug 2009 14:49:44 -0500 [thread overview]
Message-ID: <1250711384.4375.12.camel@camille.espersunited.com> (raw)
In-Reply-To: <200908192139.26505.dirk.heinrichs@online.de>
On Wed, 2009-08-19 at 21:39 +0200, Dirk Heinrichs wrote:
> Am Mittwoch 19 August 2009 21:10:27 schrieb Michael Sullivan:
>
> > I just can't figure out why it's not working, since it
> > works when I boot with the livecd...
>
> That's the good news. Please post output of lspci -v from the LiveCD.
>
> Bye...
>
> Dirk
livecd ~ # lspci -v
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
Subsystem: Hewlett-Packard Company Device 2a6c
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
Subsystem: Hewlett-Packard Company Device 2a6c
Flags: bus master, 66MHz, fast devsel, latency 0
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
Subsystem: Hewlett-Packard Company Device 2a6c
Flags: 66MHz, fast devsel, IRQ 7
I/O ports at ff00 [size=64]
I/O ports at 1c00 [size=64]
I/O ports at 1c40 [size=64]
Capabilities: [44] Power Management version 2
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
Subsystem: Hewlett-Packard Company Device 2a6c
Flags: 66MHz, fast devsel
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
(prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device 2a6c
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
(prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 2a6c
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=0098
Capabilities: [80] Power Management version 2
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
(prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fd700000-fd7fffff
Prefetchable memory behind bridge: fde00000-fdefffff
Capabilities: [b8] Subsystem: Hewlett-Packard Company Device 2a6c
Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio
(rev a2)
Subsystem: Hewlett-Packard Company Device 2a6c
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
Memory at fe024000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Count=1/1
Enable-
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
Subsystem: Hewlett-Packard Company Device 2a6c
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
I/O ports at fc00 [size=8]
Capabilities: [44] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Count=1/8
Enable-
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
(prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device 2a6c
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
I/O ports at 09f0 [size=8]
I/O ports at 0bf0 [size=4]
I/O ports at 0970 [size=8]
I/O ports at 0b70 [size=4]
I/O ports at f700 [size=16]
Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Count=1/4
Enable-
Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: sata_nv
Kernel modules: sata_nv
00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
(prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device 2a6c
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
I/O ports at 09e0 [size=8]
I/O ports at 0be0 [size=4]
I/O ports at 0960 [size=8]
I/O ports at 0b60 [size=4]
I/O ports at f200 [size=16]
Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Count=1/4
Enable-
Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: sata_nv
Kernel modules: sata_nv
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
Capabilities: [40] Subsystem: Hewlett-Packard Company Device 2a6c
Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Count=1/2
Enable-
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport-driver
00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fdb00000-fdbfffff
Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff
Capabilities: [40] Subsystem: Hewlett-Packard Company Device 2a6c
Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Count=1/2
Enable-
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport-driver
00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fd900000-fd9fffff
Prefetchable memory behind bridge: 00000000fd800000-00000000fd8fffff
Capabilities: [40] Subsystem: Hewlett-Packard Company Device 2a6c
Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Count=1/2
Enable-
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport-driver
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce
6150SE nForce 430] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 2a6c
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 7
Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at c4000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Count=1/1
Enable-
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron,
Athlon64, Sempron] HyperTransport Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron,
Athlon64, Sempron] Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron,
Athlon64, Sempron] DRAM Controller
Flags: fast devsel
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron,
Athlon64, Sempron] Miscellaneous Control
Flags: fast devsel
Capabilities: [f0] Secure device <?>
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron,
Athlon64, Sempron] Link Control
Flags: fast devsel
04:00.0 Communication controller: Agere Systems Device 0630 (rev 01)
Subsystem: Agere Systems Device 0630
Flags: bus master, fast devsel, latency 0, IRQ 7
Memory at fd9ff000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 3
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Count=1/1
Enable-
Capabilities: [60] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSVoil-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSVoil-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSVoil-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [130] Vendor Specific Information <?>
next prev parent reply other threads:[~2009-08-19 19:49 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-19 19:10 [gentoo-user] net.eth0 won't work! Michael Sullivan
2009-08-19 19:37 ` Paul Hartman
2009-08-19 19:58 ` [gentoo-user] net.eth0 won't work! [SOLVED] Michael Sullivan
2009-08-19 20:05 ` Paul Hartman
2009-08-19 19:39 ` [gentoo-user] net.eth0 won't work! Dirk Heinrichs
2009-08-19 19:49 ` Michael Sullivan [this message]
2009-08-19 20:38 ` Dirk Heinrichs
2009-08-19 19:42 ` Dirk Heinrichs
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1250711384.4375.12.camel@camille.espersunited.com \
--to=msulli1355@gmail.com \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox