On Sun, 2009-06-14 at 19:04 -0600, Maxim Wexler wrote:
> Hi group,
> 
> My fresh install of 2.6.29-r5 goes kablooey just after 'Loading module dm-mod'
> 
> Then the boot console reports:
> 
> Couldn't find device with uuid 'ldwVeS-gw14-HE42-M3Gw-DILI-Dbjh-2lHroF'
> 
> and
> 
> Couldn't find all physical volumes for volume group vg.
> 
> and
> 
> Volume group "vg" not found
> 
> The above repeat several times until: 'Failed to setup the LVM'. Then
> off course fsck.ext2 complains it can't find /dev/vg/usr and so on...
> 
> My fllter in lvm.conf : filter = [ "a|/dev/sd[ab]|", "r/.*/"] which
> corresponds to my Phison SSD and a 8G SD card.
> 
> In /etc/fstab the logical volumes are listed like:
> 
> /dev/vg/usr   /usr   ext2  noatime  0 2 # etc as per 'Gentoo LVM2 installation'
> 
> When I run the reactivate commands given at the end of the above
> document all goes well except for:
> 
> WARNING: Ignoring duplicate config node: filter (seeking filter)
> 
> But /usr /home /tmp /opt are still empty and /var has only lib and
> lock below it.
> 
> The good news: it boots and lets me log in ;)
> 
> Maxim

Hello :)

Have you tried with the default filter 
	filter = [ "r|/dev/nbd.*|", "a/.*/" ]
to be on the safe side?

Are you sure, that at the moment the script runs, the devices are
accessible? Maybe a module needs to load before dm-mod loads?

Bye,
Daniel