Re: [gentoo-user] iwlwifi & psk auth

[Pongracz Istvan <pongracz.istvan@gmail.com>]

Hi,

Thank you, I modified my settings based on your config.
I still fail.

I configured my router as follows:
Wireless Configuration  
Mode  AP  
ESSID  HomeLinux  
Channel Number  9  
Security&#-1;&#-1;  WPA pre-shared key 
Associated Clients 0  
BSSID&#-1;&#-1; 00:0e:2e:70:3a:17

Authentication type: Shared key
Broadcast ESSID: Enabled
IAPP: Enabled
802.11g protection: Enabled

Encryption: WPA pre-shared key
WPA Unicast Cipher Suite: WPA(TKIP)
Pre-shared Key format: Passphrase
Pre-shared key: My very secret password

My wpa_supplicant is:

ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel
update_config=0
fast_reauth=1
ap_scan=1


network={
    ssid="HomeLinux"
    psk="WADDA"
    key-mgmt=WPA-PSK
    pairwise=TKIP
    group=TKIP
    priority=5
}

network={
    key_mgmt=NONE
    priority=0
}


My net is:

######### WIRELESS ########################

modules=("wpa_supplicant")
wpa_supplicant_wlan0="-Dwext" # This, you need

#preferred_aps=( "WLAN1","WLAN2" ) Do not set this: wpa_supplicant chooses
#the APs itself

#Network configuration
config_HomeLinux=( "192.168.0.100 netmask 255.255.255.0 broadcast 192.168.0.255" )

#
routes_HomeLinux=( "default via 192.168.0.1" )

#
dns_servers_HomeLinux=( "192.168.0.1" )

#
gateways_HomeLinux=( "192.168.0.1" )


I guess, I missed something trivial. For example I should use only wired lan :)

István


-- 
BSA. Mert megérdemlitek.
Open Source. Mert megérdemlem.
--
BSA. They value it.
Open Source. The value. It.
--
http://www.osbusiness.hu

-- 
gentoo-user@lists.gentoo.org mailing list